HP Photosmart C5380

[Ludwig]

HP Photosmart C5380 All-in-One-Drucker
Modell: Q8291A
Seriennummer: MY95BBD0XF054V

Druckt nur Fragmente 1/8 einer Seite und in Intervallen.

$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.9.8)

Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP

This software comes with ABSOLUTELY NO WARRANTY.

This is free software, and you are welcome to distribute it

under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:

1. Compile-time check mode (-c or --compile): Use this mode before compiling the

HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies

are installed to successfully compile HPLIP.

2. Run-time check mode (-r or --run): Use this mode to determine if a distro

supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball

has the proper dependencies installed to successfully run.

3. Both compile- and run-time check mode (-b or --both) (Default): This mode

will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------

| SYSTEM INFO |

---------------

Basic system information:

Linux ludwig-desktop 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux

Distribution:

ubuntu 9.10

Checking Python version...

OK, version 2.6.4 installed

Checking PyQt 4.x version...

OK, version 4.6 installed.

Checking for CUPS...

Status: Scheduler ist aktiv

error: Version: (Not available. CUPS may not be installed or not running.)

Checking for dbus/python-dbus...

dbus daemon is running.

python-dbus version: 0.83.0

------------------------------------

| COMPILE AND RUNTIME DEPENDENCIES |

------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).

note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...

OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...

warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

To install this dependency, execute this command:

sudo aptitude install --assume-yes cupsddk cupsddk-drivers

Checking for dependency: CUPS devel- Common Unix Printing System development files...

error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes libcupsys2-dev cupsys-bsd

Checking for dependency: CUPS image - CUPS image development files...

error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes libcupsimage2-dev

Checking for dependency: DBus - Message bus system...

error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes libdbus-1-dev

Checking for dependency: gcc - GNU Project C and C++ Compiler...

error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes build-essential

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...

OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...

error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes openssl

Checking for dependency: libjpeg - JPEG library...

error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes libjpeg62-dev

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...

error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes libsnmp-dev

Checking for dependency: libpthread - POSIX threads library...

OK, found.

Checking for dependency: libtool - Library building support services...

error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes libtool

Checking for dependency: libusb - USB library...

error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes libusb-dev

Checking for dependency: make - GNU make utility to maintain groups of programs...

OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...

OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...

warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

To install this dependency, execute this command:

sudo aptitude install --assume-yes policykit policykit-gnome

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...

OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...

OK, found.

Checking for dependency: Python devel - Python development files...

OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...

OK, found.

Checking for dependency: Python XML libraries...

OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...

OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...

OK, found.

Checking for dependency: Reportlab - PDF library for Python...

OK, found.

Checking for dependency: SANE - Scanning library...

OK, found.

Checking for dependency: SANE - Scanning library development files...

error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

To install this dependency, execute this command:

sudo aptitude install --assume-yes libsane-dev

Checking for dependency: scanimage - Shell scanning program...

OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...

OK, found.

----------------------

| HPLIP INSTALLATION |

----------------------

Currently installed HPLIP version...

HPLIP 3.9.8 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:

# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]

version=3.9.8

[dirs]

home=/usr/share/hplip

run=/var/run

ppd=/usr/share/ppd/hplip/HP

ppdbase=/usr/share/ppd/hplip

doc=/usr/share/doc/hplip-doc/HTML

icon=no

cupsbackend=/usr/lib/cups/backend

cupsfilter=/usr/lib/cups/filter

drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.

[configure]

network-build=yes

pp-build=yes

gui-build=yes

scanner-build=yes

fax-build=yes

dbus-build=yes

cups11-build=no

doc-build=yes

shadow-build=no

hpijs-install=yes

foomatic-drv-install=yes

foomatic-ppd-install=yes

foomatic-rip-hplip-install=no

hpcups-install=yes

cups-drv-install=yes

cups-ppd-install=no

internal-tag=3.9.8.36

restricted-build=no

ui-toolkit=qt4

qt3=no

qt4=yes

policy-kit=yes

hpijs-only-build=no

lite-build=no

udev-acl-rules=yes

Current contents of '/var/lib/hp/hplip.state' file:

# hplip.state - HPLIP runtime persistent variables.

[plugin]

installed=0

eula=0

Current contents of '~/.hplip/hplip.conf' file:

[last_used]

printer_name = Photosmart-C5300-series

working_dir = .

device_uri = "hp:/usb/Photosmart_C5300_series?serial=MY95BBD0XF054V"

[commands]

scan = /usr/bin/xsane -V %SANE_URI%

[installation]

version = 3.9.8.36

date_time = 2010-01-29 08:19:19

[settings]

systray_messages = 0

systray_visible = 0

[fax]

email_address =

voice_phone =

[refresh]

rate = 30

enable = false

type = 1

[polling]

enable = false

device_list =

interval = 5

--------------------------

| DISCOVERED USB DEVICES |

--------------------------

  Device URI Model

  -------------------------------- --------------------------

  hp:/usb/Photosmart_C5300_series? HP Photosmart C5300 series

  serial=MY95BBD0XF054V

---------------------------------

| INSTALLED CUPS PRINTER QUEUES |

---------------------------------

Photosmart-C5300-series

-----------------------

Type: Printer

Device URI: hp:/usb/Photosmart_C5300_series?serial=MY95BBD0XF054V

PPD: /etc/cups/ppd/Photosmart-C5300-series.ppd

PPD Description: HP Photosmart c5300 Series hpijs, 3.9.8

Printer status: Drucker „Photosmart-C5300-series“ druckt gerade Photosmart-C5300-series–0; aktiviert seit Fre 29 Jän 2010 08:18:55 CET

Communication status: Good

----------------------

| SANE CONFIGURATION |

----------------------

'hpaio' in '/etc/sane.d/dll.conf'...

'hpaio' in '/etc/sane.d/dll.d/hplip'...

OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect

device `hpaio:/usb/Photosmart_C5300_series?serial=MY95BBD0XF054V' is a Hewlett-Packard Photosmart_C5300_series all-in-one

---------------------

| PYTHON EXTENSIONS |

---------------------

Checking 'cupsext' CUPS extension...

OK, found.

Checking 'pcardext' Photocard extension...

OK, found.

Checking 'hpmudext' I/O extension...

OK, found.

Checking 'scanext' SANE scanning extension...

OK, found.

-----------------

| USB I/O SETUP |

-----------------

Checking for permissions of USB attached printers...

HP Device 0x7111 at 001:005:

    Device URI: hp:/usb/Photosmart_C5300_series?serial=MY95BBD0XF054V

    Device node: /dev/bus/usb/001/005

    Mode: 0664

---------------

| USER GROUPS |

---------------

ludwig adm dialout cdrom plugdev lpadmin admin sambashare

-----------

| SUMMARY |

-----------

error: 13 errors and/or warnings.

Summary of needed commands to run to satisfy missing dependencies:

sudo aptitude install --assume-yes cupsddk cupsddk-drivers

sudo aptitude install --assume-yes libcupsys2-dev cupsys-bsd

sudo aptitude install --assume-yes libcupsimage2-dev

sudo aptitude install --assume-yes libdbus-1-dev

sudo aptitude install --assume-yes build-essential

sudo aptitude install --assume-yes openssl

sudo aptitude install --assume-yes libjpeg62-dev

sudo aptitude install --assume-yes libsnmp-dev

sudo aptitude install --assume-yes libtool

sudo aptitude install --assume-yes libusb-dev

sudo aptitude install --assume-yes policykit policykit-gnome

sudo aptitude install --assume-yes libsane-dev

Please refer to the installation instructions at:

http://hplip.sourceforge.net/install/index.html

Done.

$

Direkt am Rechner (USB 1.x ???) wird C5380 erkannt. Der Teilausdruck erfolgt erst mit ednet USB 4 PORT HUB (USB 2.0)

Ersuche um Hilfe mit freundlichen Gruß aus Österreich