Tevion/KWorld DVB-T 220RF Remote Control not listed in LIRC configuration

Bug #501061 reported by mike
6
This bug affects 1 person
Affects Status Importance Assigned to Milestone
lirc (Ubuntu)
Invalid
Undecided
Unassigned
Nominated for Jaunty by mike
Nominated for Lucid by mike

Bug Description

Binary package hint: lirc

I'm using Ubuntu 9.04.
The Remote control of the TV card "Tevion/KWorld DVB-T 220RF" is not listed in the LIRC config tool.

When I do "sudo dpkg-reconfigure lirc" the config tool shows a list of remotes but the "Tevion/KWorld DVB-T 220" remote is not listed.

This is the dmesg about the card:
[ 9.036205] saa7133[0]: found at 0000:01:06.0, rev: 209, irq: 19, latency: 64, mmio: 0xdffff800
[ 9.036211] saa7133[0]: subsystem: 17de:7201, board: Tevion/KWorld DVB-T 220RF [card=88,autodetected]
[ 9.036239] saa7133[0]: board init: gpio is 100
[ 9.184177] saa7133[0]: i2c eeprom 00: de 17 01 72 ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184184] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184191] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184197] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184203] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184209] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184215] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184221] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184227] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184233] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184240] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184246] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184252] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184258] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184264] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.184270] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 9.264281] tuner' 0-004b: chip found @ 0x96 (saa7133[0])
[ 9.352124] tda829x 0-004b: setting tuner address to 61
[ 9.420189] tda829x 0-004b: type set to tda8290+75a
[ 13.252673] saa7133[0]: registered device video0 [v4l2]
[ 13.252763] saa7133[0]: registered device vbi0
[ 13.252848] saa7133[0]: registered device radio0
[ 13.320375] saa7134 ALSA driver for DMA sound loaded
[ 13.320405] saa7133[0]/alsa: saa7133[0] at 0xdffff800 irq 19 registered as card -2
[ 13.428814] dvb_init() allocating 1 frontend
[ 13.532600] DVB: registering new adapter (saa7133[0])
[ 13.532605] DVB: registering adapter 0 frontend 3420965 (Philips TDA10046H DVB-T)...
[ 15.848168] tda1004x: timeout waiting for DSP ready
[ 15.888059] tda1004x: found firmware revision 0 -- invalid
[ 15.888062] tda1004x: trying to boot from eeprom
[ 18.216658] tda1004x: timeout waiting for DSP ready
[ 18.256643] tda1004x: found firmware revision 0 -- invalid
[ 18.256646] tda1004x: waiting for firmware upload...
[ 18.256650] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10046.fw
[ 31.236167] tda1004x: found firmware revision 20 -- ok
[14579.488431] lirc_dev: IR Remote Control driver registered, major 61
[14579.496329] lirc_dev: lirc_register_plugin: sample_rate: 0
[14579.496488] lirc_sir: I/O port 0x02f8, IRQ 3.
[14579.496499] lirc_sir: Installed.
[14597.830985] lirc_sir: Uninstalled.
[14617.903160] lirc_dev: IR Remote Control driver registered, major 61
[14617.908865] lirc_dev: lirc_register_plugin: sample_rate: 0
[14617.909004] lirc_sir: I/O port 0x02f8, IRQ 3.
[14617.909016] lirc_sir: Installed.
[16002.854354] lirc_sir: Uninstalled.

Revision history for this message
mike (mianfel) wrote :

One more thing. The "cat /proc/bus/input/devices":
I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
P: Phys=
S: Sysfs=/devices/virtual/input/input2
U: Uniq=
H: Handlers=mouse0 event2
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=3

I: Bus=0003 Vendor=1c4f Product=0002 Version=0110
N: Name="USB USB Keykoard"
P: Phys=usb-0000:00:04.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=120013
B: KEY=10000 7 ff800000 7ff febeffdf f3cfffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/devices/platform/pcspkr/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=40001
B: SND=6

I: Bus=0011 Vendor=0002 Product=0006 Version=0000
N: Name="ImExPS/2 Generic Explorer Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=mouse1 event5
B: EV=7
B: KEY=1f0000 0 0 0 0 0 0 0 0
B: REL=143

I: Bus=0003 Vendor=1c4f Product=0002 Version=0110
N: Name="USB USB Keykoard"
P: Phys=usb-0000:00:04.0-1/input1
S: Sysfs=/devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.1/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=1f
B: KEY=837fff 2c3027 bf004444 0 0 1 c04 a27c000 267bfa d941dfed 9e0000 0 0 0
B: REL=40
B: ABS=1 0
B: MSC=10

Revision history for this message
Alec Leamas (leamas-alec) wrote :

This bug is old. Furhermore, lirc cannot accept bugs for each each and every remote.not supported - lirc is designed to be able to cope woih unknown remotes, but it requires user intervention.

If you are still intteresteed in this see the documentaion at http://lirc.org/html/configuration-guide.html (which refers to latest version 0.9.4 in zesty). There is also an upstream mailing list at http://sf.net/p/lirc. Closing this as invalid, basicallhy as an old support request.

Changed in lirc (Ubuntu):
status: New → Invalid
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.