Al comenzar la grabación cdrecord dió error 254

[EduardoRosa]

Binary package hint: k3b

Devices
-----------------------
HL-DT-ST DVD-RAM GSA-H22N 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R secuencial, DVD-R Doble capa secuencial, DVD-R doble capa salteado, DVD-RAM, DVD-RW sobrescritura restringida, DVD-RW secuencial, DVD+RW, DVD+R, DVD+R doble capa, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Sobrescritura restringida, Salto de capa] [%7]

K3b::DataTrackReader
-----------------------
reading sectors 0 to 36144 with sector size 2056. Length: 36145 sectors, 74314120 bytes.
using buffer size of 32 blocks.
Read a total of 36145 sectors (74314120 bytes)
reading sectors 47547 to 61416 with sector size 2056. Length: 13870 sectors, 28516720 bytes.
using buffer size of 32 blocks.
Read a total of 13870 sectors (28516720 bytes)

System
-----------------------
K3b Version: 1.68.0
KDE Version: 4.3.2 (KDE 4.3.2)
QT Version: 4.5.2
Kernel: 2.6.31-15-generic

Used versions
-----------------------
cdrecord: 1.1.9

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVD-RAM GSA-H22N'
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1114112 = 1088 KB
Drive DMA Speed: 81660 kB/s 463x CD 58x DVD
FIFO size : 12582912 = 12288 KB
Speed set to 8468 KB/s
Track 01: data 70 MB
Total size: 81 MB (08:01.96) = 36147 sectors
Lout start: 81 MB (08:03/72) = 36147 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in: -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 323702
Starting to write CD/DVD at speed 48.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 70 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 00 00 00
Sense Key: 0x7 Data Protect, Segment 11
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) end of medium
cmd finished after 7.586s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing time: 15.348s
Average write speed 31.5x.
Fixating...
Fixating time: 16.247s
/usr/bin/wodim: fifo had 191 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -tao driveropts=burnfree -multi -xa1 /tmp/kde-eduardo/050428_1338/Track01.iso

ProblemType: Bug
Architecture: amd64
Date: Tue Nov 24 16:57:00 2009
DistroRelease: Ubuntu 9.10
ExecutablePath: /usr/bin/k3b
NonfreeKernelModules: nvidia
Package: k3b 1.68.0~alpha3-0ubuntu1
ProcEnviron:
 LANG=es_AR.UTF-8
 SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-15.50-generic
SourcePackage: k3b
Uname: Linux 2.6.31-15-generic x86_64
XsessionErrors: (polkit-gnome-authentication-agent-1:1833): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed

[Rohan Garg (rohangarg)]

I noticed that some of the sentences in this bug report are not in English. If they were translated to English they would be accessible to more triagers. Could you please translate them?

[Leo Arias (elopio)]

We'd like to figure out what's causing this bug for you, but we haven't heard back from you in a while. Could you please provide the requested information? Thanks!

[Leo Arias (elopio)]

We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again!