USrobotics 5416 wlan card - Wrong firmware picked
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Won't Fix
|
Medium
|
Unassigned | ||
linux-source-2.6.15 (Ubuntu) |
Won't Fix
|
Medium
|
Unassigned | ||
linux-source-2.6.22 (Ubuntu) |
Won't Fix
|
Medium
|
Unassigned |
Bug Description
I just upgraded to dapper, was pleased that it had support for my wireless lan card. However it picks the wrong firmware images. My card is a US robotics 5416 (Texas Instruments ACX 111 chipset, it's a PCI card not a USB dongle)
kubuntu picks firmware version 2.3.1.31, that didn't work so I modprobed with firmware_
Relevant part of lspci -vv :
0000:01:05.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
Subsystem: Unknown device 010e:16ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 66
Region 0: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at fdec0000 (32-bit, non-prefetchable) [size=128K]
Relevant part of lspci -vvn :
0000:01:05.0 0280: 104c:9066
Subsystem: 010e:16ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 0x08 (32 bytes)
Interrupt: pin A routed to IRQ 66
Region 0: Memory at fdefe000 (32-bit, non-prefetchable) [size=8K]
Region 1: Memory at fdec0000 (32-bit, non-prefetchable) [size=128K]
Btw, how do I ensure that at boot time the correct firmware images are chosen ?
Changed in linux-source-2.6.15: | |
status: | Incomplete → Won't Fix |
Changed in linux-source-2.6.22: | |
importance: | Undecided → Medium |
status: | Incomplete → Won't Fix |
Changed in linux: | |
importance: | Undecided → Medium |
Is this still a problem ?