WARNING: at /build/buildd/linux-2.6.31/net/sched/sch_generic.c:246 dev_watchdog+0x1f6/0x210()
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
New
|
Undecided
|
Unassigned |
Bug Description
uname -a =Linux Fretplay 2.6.31-14-generic #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 i686 GNU/Linux
cat /proc/version_
dmesg; (I realise that somethingis missing but this is all I get by writing this command;
[ 0.004797] [<c0111dbb>] mce_intel_
[ 0.004812] [<c010fcf0>] mce_cpu_
[ 0.004831] [<c056ac3c>] mcheck_
[ 0.004846] [<c0569078>] ? init_hypervisor
[ 0.004860] [<c0569030>] identify_
[ 0.004879] [<c0795732>] identify_
[ 0.004894] [<c07958c8>] check_bugs+0xb/0xe9
[ 0.004912] [<c078e8c3>] start_kernel+
[ 0.004927] [<c078e406>] ? unknown_
[ 0.004942] [<c078e07c>] i386_start_
[ 0.004969] ---[ end trace a7919e7f17c0a725 ]---
[ 0.004981] CPU0: Thermal monitoring enabled (TM1)
[ 0.005003] Performance Counters: no PMU driver, software counters only.
[ 0.005022] Checking 'hlt' instruction... OK.
[ 0.021750] SMP alternatives: switching to UP code
[ 0.040038] Freeing SMP alternatives: 19k freed
[ 0.040076] ACPI: Core revision 20090521
[ 0.057557] ACPI: setting ELCR to 0200 (from 0800)
[ 0.060142] weird, boot CPU (#0) not listed by the BIOS.
[ 0.060149] SMP motherboard not detected.
[ 0.060157] Local APIC not detected. Using dummy APIC emulation.
[ 0.060163] SMP disabled
[ 0.060509] Brought up 1 CPUs
[ 0.060519] Total of 1 processors activated (2390.54 BogoMIPS).
[ 0.060546] CPU0 attaching NULL sched-domain.
[ 0.061121] Booting paravirtualized kernel on bare hardware
[ 0.061713] regulator: core version 0.5
[ 0.061759] Time: 21:17:00 Date: 10/31/09
[ 0.061885] NET: Registered protocol family 16
[ 0.062251] EISA bus registered
[ 0.062287] ACPI: bus type pci registered
[ 0.066007] PCI: PCI BIOS revision 2.10 entry at 0xf17c0, last bus=1
[ 0.066015] PCI: Using configuration type 1 for base access
[ 0.069180] bio: create slab <bio-0> at 0
[ 0.070623] ACPI: EC: Look up EC in DSDT
[ 0.097276] ACPI: Interpreter enabled
[ 0.097295] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.097384] ACPI: Using PIC for interrupt routing
[ 0.125457] ACPI: Power Resource [FN0] (off)
[ 0.129755] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[ 0.130066] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.130182] pci 0000:00:00.0: reg 10 32bit mmio: [0xe8000000-
[ 0.130437] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.130525] pci 0000:00:02.1: reg 20 io port: [0xe600-0xe61f]
[ 0.130597] pci 0000:00:02.2: reg 10 32bit mmio: [0xe7000000-
[ 0.130698] pci 0000:00:02.3: reg 10 32bit mmio: [0xe6800000-
[ 0.130837] pci 0000:00:02.5: reg 20 io port: [0xb800-0xb80f]
[ 0.130935] pci 0000:00:02.7: reg 10 io port: [0xa800-0xa8ff]
[ 0.130953] pci 0000:00:02.7: reg 14 io port: [0xa400-0xa47f]
[ 0.131032] pci 0000:00:02.7: supports D1 D2
[ 0.131041] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.131053] pci 0000:00:02.7: PME# disabled
[ 0.131121] pci 0000:00:03.0: reg 10 io port: [0xa000-0xa0ff]
[ 0.131140] pci 0000:00:03.0: reg 14 32bit mmio: [0xe6000000-
[ 0.131190] pci 0000:00:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.131228] pci 0000:00:03.0: supports D1 D2
[ 0.131236] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131248] pci 0000:00:03.0: PME# disabled
[ 0.131330] pci 0000:00:0a.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.131368] pci 0000:00:0a.0: supports D1 D2
[ 0.131376] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131388] pci 0000:00:0a.0: PME# disabled
[ 0.131456] pci 0000:00:0a.1: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.131493] pci 0000:00:0a.1: supports D1 D2
[ 0.131501] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131513] pci 0000:00:0a.1: PME# disabled
[ 0.131580] pci 0000:00:0a.2: reg 10 32bit mmio: [0xe5800000-
[ 0.131665] pci 0000:00:0a.2: PME# supported from D0 D3hot D3cold
[ 0.131676] pci 0000:00:0a.2: PME# disabled
[ 0.131759] pci 0000:00:0c.0: reg 10 32bit mmio: [0xe5000000-
[ 0.131777] pci 0000:00:0c.0: reg 14 io port: [0x9800-0x9807]
[ 0.131852] pci 0000:00:0c.0: PME# supported from D3hot D3cold
[ 0.131864] pci 0000:00:0c.0: PME# disabled
[ 0.132017] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-
[ 0.132033] pci 0000:01:00.0: reg 14 32bit mmio: [0xe7800000-
[ 0.132049] pci 0000:01:00.0: reg 18 io port: [0xd800-0xd87f]
[ 0.132112] pci 0000:01:00.0: supports D1 D2
[ 0.132187] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.132200] pci 0000:00:01.0: bridge 32bit mmio: [0xe7800000-
[ 0.132213] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-
[ 0.132298] pci_bus 0000:00: on NUMA node 0
[ 0.132313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.132548] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.255703] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 15)
[ 0.256023] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 15)
[ 0.256322] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 15)
[ 0.256615] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 15)
[ 0.257143] SCSI subsystem initialized
[ 0.257300] libata version 3.00 loaded.
[ 0.257506] usbcore: registered new interface driver usbfs
[ 0.257556] usbcore: registered new interface driver hub
[ 0.257626] usbcore: registered new device driver usb
[ 0.258000] ACPI: WMI: Mapper loaded
[ 0.258008] PCI: Using ACPI for IRQ routing
[ 0.258351] Bluetooth: Core ver 2.15
[ 0.258434] NET: Registered protocol family 31
[ 0.258440] Bluetooth: HCI device and connection manager initialized
[ 0.258450] Bluetooth: HCI socket layer initialized
[ 0.258457] NetLabel: Initializing
[ 0.258464] NetLabel: domain hash size = 128
[ 0.258470] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.258504] NetLabel: unlabeled traffic allowed by default
[ 0.262446] pnp: PnP ACPI init
[ 0.262498] ACPI: bus type pnp registered
[ 0.273958] pnp: PnP ACPI: found 15 devices
[ 0.273968] ACPI: ACPI bus type pnp unregistered
[ 0.273981] PnPBIOS: Disabled by ACPI PNP
[ 0.274012] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.274025] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.274036] system 00:00: iomem range 0x100000-0x16ffffff could not be reserved
[ 0.274058] system 00:02: ioport range 0xe400-0xe47f has been reserved
[ 0.274068] system 00:02: ioport range 0xe480-0xe4ff has been reserved
[ 0.274079] system 00:02: ioport range 0xe600-0xe61f has been reserved
[ 0.274090] system 00:02: ioport range 0x480-0x48f has been reserved
[ 0.274101] system 00:02: iomem range 0xffee0000-
[ 0.274120] system 00:03: iomem range 0xfffe0000-
[ 0.274139] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.274165] system 00:0e: ioport range 0x3f0-0x3f1 has been reserved
[ 0.309129] AppArmor: AppArmor Filesystem Enabled
[ 0.309208] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.309219] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.309234] pci 0000:00:01.0: MEM window: 0xe7800000-
[ 0.309247] pci 0000:00:01.0: PREFETCH window: 0xf0000000-
[ 0.309261] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
[ 0.309270] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff
[ 0.309283] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff
[ 0.309295] pci 0000:00:0a.0: PREFETCH window: 0x18000000-
[ 0.309308] pci 0000:00:0a.0: MEM window: 0x1c000000-
[ 0.309321] pci 0000:00:0a.1: CardBus bridge, secondary bus 0000:06
[ 0.309329] pci 0000:00:0a.1: IO window: 0x001800-0x0018ff
[ 0.309342] pci 0000:00:0a.1: IO window: 0x001c00-0x001cff
[ 0.309354] pci 0000:00:0a.1: PREFETCH window: 0x20000000-
[ 0.309367] pci 0000:00:0a.1: MEM window: 0x24000000-
[ 0.309393] pci 0000:00:01.0: setting latency timer to 64
[ 0.310265] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.310274] PCI: setting IRQ 11 as level-triggered
[ 0.310287] pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.310313] pci 0000:00:0a.1: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.310331] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.310341] pci_bus 0000:00: resource 1 mem: [0x000000-
[ 0.310352] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.310362] pci_bus 0000:01: resource 1 mem: [0xe7800000-
[ 0.310372] pci_bus 0000:01: resource 2 pref mem [0xf0000000-
[ 0.310383] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.310393] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.310402] pci_bus 0000:02: resource 2 pref mem [0x18000000-
[ 0.310412] pci_bus 0000:02: resource 3 mem: [0x1c000000-
[ 0.310423] pci_bus 0000:06: resource 0 io: [0x1800-0x18ff]
[ 0.310432] pci_bus 0000:06: resource 1 io: [0x1c00-0x1cff]
[ 0.310442] pci_bus 0000:06: resource 2 pref mem [0x20000000-
[ 0.310452] pci_bus 0000:06: resource 3 mem: [0x24000000-
[ 0.310552] NET: Registered protocol family 2
[ 0.310800] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.311501] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.311652] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.311790] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.311798] TCP reno registered
[ 0.312025] NET: Registered protocol family 1
[ 0.312191] Trying to unpack rootfs image as initramfs...
[ 0.812005] Switched to high resolution mode on CPU 0
[ 0.840117] Freeing initrd memory: 7477k freed
[ 0.852559] Simple Boot Flag at 0x3a set to 0x1
[ 0.852787] cpufreq-nforce2: No nForce2 chipset.
[ 0.852853] Scanning for low memory corruption every 60 seconds
[ 0.853144] audit: initializing netlink socket (disabled)
[ 0.853186] type=2000 audit(125702381
[ 0.873547] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.877292] VFS: Disk quotas dquot_6.5.2
[ 0.877443] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.878929] fuse init (API version 7.12)
[ 0.879159] msgmni has been set to 709
[ 0.879664] alg: No test for stdrng (krng)
[ 0.879703] io scheduler noop registered
[ 0.879712] io scheduler anticipatory registered
[ 0.879719] io scheduler deadline registered
[ 0.879852] io scheduler cfq registered (default)
[ 0.879958] pci 0000:01:00.0: Boot video device
[ 0.880258] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.880331] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.881356] ACPI: AC Adapter [AC] (off-line)
[ 0.881539] input: Power Button as /devices/
[ 0.881551] ACPI: Power Button [PWRF]
[ 0.881684] input: Lid Switch as /devices/
[ 0.881764] ACPI: Lid Switch [LID]
[ 0.881880] input: Power Button as /devices/
[ 0.881890] ACPI: Power Button [PWRB]
[ 0.882014] input: Sleep Button as /devices/
[ 0.882023] ACPI: Sleep Button [SLPB]
[ 0.882155] fan PNP0C0B:00: registered as cooling_device0
[ 0.882173] ACPI: Fan [FAN0] (on)
[ 0.882651] Marking TSC unstable due to TSC halts in idle
[ 0.882690] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.882745] processor LNXCPU:00: registered as cooling_device1
[ 0.882756] ACPI: Processor [CPU0] (supports 4 throttling states)
[ 0.906434] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.906464] ACPI: Thermal Zone [THRM] (25 C)
[ 0.906599] isapnp: Scanning for PnP cards...
[ 1.016793] ACPI: Battery Slot [BAT0] (battery present)
[ 1.364270] isapnp: No Plug & Play device found
[ 1.367725] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.367976] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
[ 1.371302] brd: module loaded
[ 1.372547] loop: module loaded
[ 1.372780] input: Macintosh mouse button emulation as /devices/
[ 1.374431] pata_sis 0000:00:02.5: version 0.5.2
[ 1.374806] scsi0 : pata_sis
[ 1.375052] scsi1 : pata_sis
[ 1.376627] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 1.376637] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 1.377895] Fixed MDIO Bus: probed
[ 1.378009] PPP generic driver version 2.4.2
[ 1.378301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.378364] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.379296] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 1.379310] ohci_hcd 0000:00:02.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.379350] ohci_hcd 0000:00:02.2: OHCI Host Controller
[ 1.379499] ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 1.379545] ohci_hcd 0000:00:02.2: irq 11, io mem 0xe7000000
[ 1.434238] usb usb1: configuration #1 chosen from 1 choice
[ 1.434339] hub 1-0:1.0: USB hub found
[ 1.434366] hub 1-0:1.0: 3 ports detected
[ 1.434495] ohci_hcd 0000:00:02.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 1.434524] ohci_hcd 0000:00:02.3: OHCI Host Controller
[ 1.434633] ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
[ 1.434668] ohci_hcd 0000:00:02.3: irq 11, io mem 0xe6800000
[ 1.490205] usb usb2: configuration #1 chosen from 1 choice
[ 1.490289] hub 2-0:1.0: USB hub found
[ 1.490318] hub 2-0:1.0: 3 ports detected
[ 1.490453] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.490701] PNP: PS/2 Controller [PNP0303:
[ 1.493579] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.494996] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.495015] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.495027] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.495039] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.495051] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.495235] mice: PS/2 mouse device common for all mice
[ 1.495572] rtc_cmos 00:06: RTC can wake from S4
[ 1.495673] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.495710] rtc0: alarms up to one month, 242 bytes nvram
[ 1.495994] device-mapper: uevent: version 1.0.3
[ 1.496277] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: <email address hidden>
[ 1.496475] device-mapper: multipath: version 1.1.0 loaded
[ 1.496483] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.496809] EISA: Probing bus 0 at eisa.0
[ 1.496825] Cannot allocate resource for EISA slot 1
[ 1.496866] EISA: Detected 0 cards.
[ 1.497071] cpuidle: using governor ladder
[ 1.497212] cpuidle: using governor menu
[ 1.498503] TCP cubic registered
[ 1.498834] NET: Registered protocol family 10
[ 1.499985] lo: Disabled Privacy Extensions
[ 1.500847] NET: Registered protocol family 17
[ 1.500909] Bluetooth: L2CAP ver 2.13
[ 1.500915] Bluetooth: L2CAP socket layer initialized
[ 1.500925] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.500932] Bluetooth: SCO socket layer initialized
[ 1.501017] Bluetooth: RFCOMM TTY layer initialized
[ 1.501026] Bluetooth: RFCOMM socket layer initialized
[ 1.501033] Bluetooth: RFCOMM ver 1.11
[ 1.502650] Using IPI No-Shortcut mode
[ 1.502802] PM: Resume from disk failed.
[ 1.502827] registered taskstats version 1
[ 1.503035] Magic number: 13:303:299
[ 1.503181] rtc_cmos 00:06: setting system clock to 2009-10-31 21:17:01 UTC (1257023821)
[ 1.503189] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.503193] EDD information not available.
[ 1.525055] input: AT Translated Set 2 keyboard as /devices/
[ 1.540688] ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD0A, max UDMA/100
[ 1.540695] ata1.00: 78140160 sectors, multi 16: LBA48
[ 1.556511] ata1.00: configured for UDMA/100
[ 1.556724] scsi 0:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5
[ 1.556971] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.557051] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.557142] sd 0:0:0:0: [sda] Write Protect is off
[ 1.557149] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.557196] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.557445] sda: sda1 sda2 < sda5 >
[ 1.611822] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.723678] Freeing unused kernel memory: 540k freed
[ 1.724510] Write protecting the kernel text: 4568k
[ 1.724558] Write protecting the kernel read-only data: 1836k
[ 1.808062] Clocksource tsc unstable (delta = 152620964 ns)
[ 2.170019] Linux agpgart interface v0.103
[ 2.175795] agpgart-sis 0000:00:00.0: SiS chipset [1039/0650]
[ 2.189360] Floppy drive(s): fd0 is 1.44M
[ 2.195825] sis900.c: v1.08.10 Apr. 2 2006
[ 2.232248] FDC 0 is a National Semiconductor PC87306
[ 2.333874] agpgart-sis 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
[ 2.334651] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 2.334661] sis900 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 2.336006] 0000:00:03.0: ICS LAN PHY transceiver found at address 1.
[ 2.349932] 0000:00:03.0: Using transceiver found at address 1 as default
[ 2.425198] eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 11, 00:0c:6e:69:1b:e6
[ 2.425758] ohci1394 0000:00:0a.2: PCI INT A -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 2.482062] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[e5800000-
[ 3.788330] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180003
[ 5.143534] PM: Starting manual resume from disk
[ 5.143544] PM: Resume from partition 8:5
[ 5.143548] PM: Checking hibernation image.
[ 5.143811] PM: Resume from disk failed.
[ 5.203124] kjournald starting. Commit interval 5 seconds
[ 5.203163] EXT3-fs: mounted filesystem with writeback data mode.
[ 5.796069] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 6.012240] usb 1-1: configuration #1 chosen from 1 choice
[ 6.039633] Initializing USB Mass Storage driver...
[ 6.039827] scsi2 : SCSI emulation for USB Mass Storage devices
[ 6.040290] usbcore: registered new interface driver usb-storage
[ 6.040299] USB Mass Storage support registered.
[ 6.040596] usb-storage: device found at 2
[ 6.040601] usb-storage: waiting for device to settle before scanning
[ 6.717030] type=1505 audit(125702382
[ 6.759520] type=1505 audit(125702382
[ 6.760493] type=1505 audit(125702382
[ 6.760998] type=1505 audit(125702382
[ 6.828707] type=1505 audit(125702382
[ 6.843923] type=1505 audit(125702382
[ 6.857500] type=1505 audit(125702382
[ 6.907827] type=1505 audit(125702382
[ 6.913384] type=1505 audit(125702382
[ 6.914468] type=1505 audit(125702382
[ 8.633331] Adding 1060248k swap on /dev/sda5. Priority:-1 extents:1 across:1060248k
[ 9.895833] EXT3 FS on sda1, internal journal
[ 11.041227] usb-storage: device scan complete
[ 11.048204] scsi 2:0:0:0: Direct-Access Philips GoGear SA19xx 0100 PQ: 0 ANSI: 4
[ 11.049026] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 11.059167] sd 2:0:0:0: [sdb] 478592 4096-byte logical blocks: (1.96 GB/1.82 GiB)
[ 11.066201] sd 2:0:0:0: [sdb] Write Protect is off
[ 11.066212] sd 2:0:0:0: [sdb] Mode Sense: 3e 00 00 00
[ 11.066218] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.085186] sd 2:0:0:0: [sdb] 478592 4096-byte logical blocks: (1.96 GB/1.82 GiB)
[ 11.092154] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.092167] sdb: sdb1
[ 11.125183] sd 2:0:0:0: [sdb] 478592 4096-byte logical blocks: (1.96 GB/1.82 GiB)
[ 11.132159] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 11.132171] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 12.190596] udev: starting version 147
[ 16.769102] irda_init()
[ 16.769130] NET: Registered protocol family 23
[ 16.779147] lp: driver loaded but no devices found
[ 17.067286] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.701066] parport_pc 00:0a: reported by Plug and Play ACPI
[ 17.701192] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,
[ 17.796370] lp0: using parport0 (interrupt-driven).
[ 18.944625] asus_laptop: Asus Laptop Support version 0.42
[ 18.961000] asus_laptop: M2E model detected
[ 18.961272] input: Asus Laptop extra buttons as /devices/
[ 19.138218] Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
[ 19.147303] nsc_ircc_
[ 19.147355] nsc-ircc, chip->init
[ 19.147369] nsc-ircc, Found chip at base=0x02e
[ 19.147402] nsc-ircc, driver loaded (Dag Brattli)
[ 19.147416] nsc_ircc_open(), can't get iobase of 0x2f8
[ 19.147455] nsc-ircc, Found chip at base=0x02e
[ 19.147488] nsc-ircc, driver loaded (Dag Brattli)
[ 19.147495] nsc_ircc_open(), can't get iobase of 0x2f8
[ 19.147935] nsc-ircc 00:0b: disabled
[ 19.164918] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600
[ 19.164930] ACPI: I/O resource 0000:00:02.1 [0xe600-0xe61f] conflicts with ACPI region SM00 [0xe600-0xe609]
[ 19.164938] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.164953] sis96x_smbus: probe of 0000:00:02.1 failed with error -16
[ 19.175817] ppdev: user-space parallel port driver
[ 19.192852] input: SynPS/2 Synaptics TouchPad as /devices/
[ 19.418127] __ratelimit: 6 callbacks suppressed
[ 19.418135] type=1505 audit(125702383
[ 19.422052] type=1505 audit(125702383
[ 19.422980] type=1505 audit(125702383
[ 19.423490] type=1505 audit(125702383
[ 19.435545] type=1505 audit(125702383
[ 19.458040] type=1505 audit(125702383
[ 19.467159] type=1505 audit(125702383
[ 19.482389] type=1505 audit(125702383
[ 19.493272] type=1505 audit(125702383
[ 19.494362] type=1505 audit(125702383
[ 19.967369] yenta_cardbus 0000:00:0a.0: CardBus bridge found [1043:1687]
[ 20.092499] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x0438, PCI irq 11
[ 20.092509] yenta_cardbus 0000:00:0a.0: Socket status: 30000006
[ 20.092832] yenta_cardbus 0000:00:0a.1: CardBus bridge found [1043:1687]
[ 20.220823] yenta_cardbus 0000:00:0a.1: ISA IRQ mask 0x0438, PCI irq 11
[ 20.220832] yenta_cardbus 0000:00:0a.1: Socket status: 30000006
[ 20.450894] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.766477] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 20.768891] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 20.769715] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 20.770441] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 20.771437] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 21.006045] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 21.008088] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 21.008912] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 21.009639] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 21.010631] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 23.078536] Intel ICH 0000:00:02.7: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 23.400065] intel8x0_
[ 23.400073] intel8x0: clocking to 48000
[ 35.441847] eth0: Media Link Off
[ 35.441982] ADDRCONF(
[ 40.065874] ttyS1: LSR safety check engaged!
[ 2096.941238] usb 1-1: USB disconnect, address 2
[ 2561.443525] ADDRCONF(
[ 2566.000062] ------------[ cut here ]------------
[ 2566.000092] WARNING: at /build/
[ 2566.000101] Hardware name: M2000E
[ 2566.000109] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out
[ 2566.000116] Modules linked in: nls_iso8859_1 nls_cp437 vfat fat binfmt_misc snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device iptable_filter snd pcmcia ip_tables joydev soundcore yenta_socket x_tables ppdev i2c_sis96x snd_page_alloc asus_laptop rsrc_nonstatic psmouse parport_pc shpchp lp irda pcmcia_core serio_raw crc_ccitt led_class parport usb_storage ohci1394 ieee1394 sis900 mii floppy sis_agp agpgart
[ 2566.000223] Pid: 0, comm: swapper Tainted: G W 2.6.31-14-generic #48-Ubuntu
[ 2566.000231] Call Trace:
[ 2566.000253] [<c014518d>] warn_slowpath_
[ 2566.000267] [<c04b07c6>] ? dev_watchdog+
[ 2566.000279] [<c04b07c6>] ? dev_watchdog+
[ 2566.000293] [<c0145206>] warn_slowpath_
[ 2566.000305] [<c04b07c6>] dev_watchdog+
[ 2566.000323] [<c0157fdb>] ? insert_
[ 2566.000338] [<c0127c38>] ? default_
[ 2566.000354] [<c05707da>] ? _spin_lock_
[ 2566.000368] [<c0158371>] ? __queue_
[ 2566.000380] [<c01501b7>] run_timer_
[ 2566.000393] [<c04b05d0>] ? dev_watchdog+
[ 2566.000409] [<c014b3b0>] __do_softirq+
[ 2566.000421] [<c0127c38>] ? default_
[ 2566.000433] [<c05707da>] ? _spin_lock_
[ 2566.000449] [<c0106b92>] ? enable_
[ 2566.000461] [<c014b4fd>] do_softirq+
[ 2566.000473] [<c014b63d>] irq_exit+0x5d/0x70
[ 2566.000484] [<c0104f10>] do_IRQ+0x50/0xc0
[ 2566.000496] [<c01039b0>] common_
[ 2566.000516] [<c0369b02>] ? acpi_idle_
[ 2566.000534] [<c0468406>] cpuidle_
[ 2566.000545] [<c010202c>] cpu_idle+0x8c/0xd0
[ 2566.000561] [<c055e875>] rest_init+0x55/0x60
[ 2566.000578] [<c078e8cd>] start_kernel+
[ 2566.000591] [<c078e406>] ? unknown_
[ 2566.000605] [<c078e07c>] i386_start_
[ 2566.000613] ---[ end trace a7919e7f17c0a727 ]---
[ 2566.000625] eth0: Transmit timeout, status 00000004 00000000
[ 2566.441017] eth0: Media Link On 100mbps full-duplex
[ 2572.392051] eth0: no IPv6 routers present
Sudo Ispci -vnvn;
00:00.0 Host bridge [0600]: Silicon Integrated Systems [SiS] 650/M650 Host [1039:0650] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:1612]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel driver in use: agpgart-sis
Kernel modules: sis-agp
00:01.0 PCI bridge [0604]: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) [1039:0001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e7800000-e7ffffff
Prefetchable memory behind bridge: f0000000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:02.0 ISA bridge [0601]: Silicon Integrated Systems [SiS] SiS961 [MuTIOL Media IO] [1039:0961] (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:02.1 SMBus [0c05]: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller [1039:0016]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 0
Region 4: I/O ports at e600 [size=32]
Kernel modules: i2c-sis96x
00:02.2 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:1689]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:02.3 USB Controller [0c03]: Silicon Integrated Systems [SiS] USB 1.1 Controller [1039:7001] (rev 07) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:1689]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 11
Region 0: Memory at e6800000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:02.5 IDE interface [0101]: Silicon Integrated Systems [SiS] 5513 [IDE] [1039:5513] (rev d0) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device [1043:1688]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 128
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at b800 [size=16]
Kernel driver in use: pata_sis
00:02.7 Multimedia audio controller [0401]: Silicon Integrated Systems [SiS] AC'97 Sound Controller [1039:7012] (rev a0)
Subsystem: ASUSTeK Computer Inc. Device [1043:1663]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at a800 [size=256]
Region 1: I/O ports at a400 [size=128]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:03.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet [1039:0900] (rev 90)
Subsystem: ASUSTeK Computer Inc. Device [1043:1455]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (13000ns min, 2750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 28000000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sis900
Kernel modules: sis900
00:0a.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
Subsystem: ASUSTeK Computer Inc. Device [1043:1687]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 28020000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 18000000-1bfff000 (prefetchable)
Memory window 1: 1c000000-1ffff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0a.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev a8)
Subsystem: ASUSTeK Computer Inc. Device [1043:1687]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 28021000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 20000000-23fff000 (prefetchable)
Memory window 1: 24000000-27fff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:0a.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:1687]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
00:0c.0 Communication controller [0780]: Conexant Systems, Inc. HSF 56k HSFi Modem [14f1:2f00] (rev 01)
Subsystem: Actiontec Electronics Inc Device [1668:8d89]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=64K]
Region 1: I/O ports at 9800 [size=8]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 65x/M650/740 PCI/AGP VGA Display Adapter [1039:6325]
Subsystem: ASUSTeK Computer Inc. Device [1043:1612]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
BIST result: 00
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e7800000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d800 [size=128]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 2.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
Kernel modules: sisfb
ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
AplayDevices:
**** List of PLAYBACK Hardware Devices ****
card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012]
Subdevices: 1/1
Subdevice #0: subdevice #0
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/
/dev/snd/seq: timidity 1654 F.... timidity
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
Card hw:0 'SI7012'/'SiS SI7012 with STAC9721,23 at irq 11'
Mixer name : 'SigmaTel STAC9721,23'
Components : 'AC97a:83847609'
Controls : 31
Simple ctrls : 21
Date: Sat Oct 31 22:59:58 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=
IwConfig:
lo no wireless extensions.
eth0 no wireless extensions.
Lsusb:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: ASUSTEK M2000E
Package: linux-image-
PccardctlIdent:
Socket 0:
no product info available
Socket 1:
no product info available
PccardctlStatus:
Socket 0:
no card
Socket 1:
no card
ProcCmdLine: root=UUID=
ProcVersionSign
RelatedPackageV
linux-
linux-firmware 1.24
RfKill:
SourcePackage: linux
Tags: kernel-oops
Title: WARNING: at /build/
Uname: Linux 2.6.31-14-generic i686
WpaSupplicantLog:
XsessionErrors:
(gnome-
(gnome-
(gnome-
(nautilus:4755): Eel-WARNING **: "nautilus-
(nautilus:4755): Eel-WARNING **: "nautilus-
dmi.bios.date: 04/14/2003
dmi.bios.vendor: Award Software, Inc.
dmi.bios.version: 0107
dmi.board.name: M2000E
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: REV 1.xx
dmi.chassis.
dmi.chassis.type: 7
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.
dmi.modalias: dmi:bvnAwardSof
dmi.product.name: M2000E
dmi.product.
dmi.sys.vendor: ASUSTEK
summary: |
- kernel problem -ubuntu 9.10 + WARNING: at /build/buildd/linux-2.6.31/net/sched/sch_generic.c:246 + dev_watchdog+0x1f6/0x210() |
Just a comment on the bug; didnt write in the actualy bugrepport what happend;
On startup after upgrading to Ubuntu 9.10 I get a kernel problem repport saying that my system might be unstable if I do not fix this. -Also the computer takes a wery long time to boot. -It looks as on boot that the load screen from my old ubuntu runs first and then the new ubuntu load screen appears, -dont know if this is actualy how it should be, but it just seems vierd to me, as one load screen should be enough in my opinion.