WARNING: at /build/buildd/linux-2.6.31/net/wireless/util.c:127 set_mandatory_flags_band+0x17e/0x190 [cfg80211]()

[Moneta Funzionata]

I'm not sure what this is. The system reported a serious kernel error and recommended I file a bug report.

I had just installed the wireless card, then started the system, and was going to try to set up the wireless card.

ProblemType: KernelOops
Annotation: Your system might become unstable now and might need to be restarted.
Architecture: i386
ArecordDevices:
 **** List of CAPTURE Hardware Devices ****
 card 0: E2E [ESS ES1978 (Maestro 2E)], device 0: ESS Maestro [ESS Maestro]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: stew 1405 F.... xfce4-mixer-plu
                      stew 1416 F.... xfce4-volumed
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
 Card hw:0 'E2E'/'ESS ES1978 (Maestro 2E) at 0x3000, irq 11'
   Mixer name : 'SigmaTel STAC9721,23'
   Components : 'AC97a:83847609'
   Controls : 31
   Simple ctrls : 21
Date: Sat Oct 24 19:59:22 2009
DistroRelease: Ubuntu 9.10
Failure: oops
HibernationDevice: RESUME=UUID=2b639b84-73c1-4ef2-bb10-d85f77714958
InstallationMedia: Xubuntu 9.10 "Karmic Koala" - Release Candidate i386 (20091021)
IwConfig:
 lo no wireless extensions.

 eth0 no wireless extensions.

 wmaster0 no wireless extensions.
Lsusb: Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: Compaq Armada M700
Package: linux-image-2.6.31-14-generic 2.6.31-14.48
PccardctlIdent:
 Socket 0:
   no product info available
 Socket 1:
   no product info available
PccardctlStatus:
 Socket 0:
   3.3V 32-bit PC Card
 Socket 1:
   no card
ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=e4162dba-c37c-44f4-9891-df2c86cda61b ro quiet splash
ProcVersionSignature: Ubuntu 2.6.31-14.48-generic
RelatedPackageVersions:
 linux-backports-modules-2.6.31-14-generic N/A
 linux-firmware 1.24
RfKill:
 0: phy0: Wireless LAN
  Soft blocked: no
  Hard blocked: no
SourcePackage: linux
Tags: kernel-oops
Title: WARNING: at /build/buildd/linux-2.6.31/net/wireless/util.c:127 set_mandatory_flags_band+0x17e/0x190 [cfg80211]()
Uname: Linux 2.6.31-14-generic i686
dmi.bios.date: 03/15/2002
dmi.bios.vendor: Compaq
dmi.bios.version: 1.35
dmi.board.name: 0538
dmi.board.vendor: Compaq
dmi.chassis.type: 10
dmi.chassis.vendor: Compaq
dmi.modalias: dmi:bvnCompaq:bvr1.35:bd03/15/2002:svnCompaq:pnArmadaM700:pvr:rvnCompaq:rn0538:rvr:cvnCompaq:ct10:cvr:
dmi.product.name: Armada M700
dmi.sys.vendor: Compaq

[Charlie Kravetz (cjkgeek)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. We are sorry that we do not always have the capacity to look at all reported bugs in a timely manner. There have been many changes in Ubuntu since that time you reported the bug and your problem may have been fixed with some of the updates. If you could test the current Ubuntu development version, this would help us a lot.If you can test it, and it is still an issue, we would appreciate if you could upload updated logs by running apport-collect 460123, and any other logs that are relevant for this particular issue.

[Charlie Kravetz (cjkgeek)]

We'd like to figure out what's causing this bug for you, but we haven't heard back from you in a while. Could you please provide the requested information? Thanks!

[Charlie Kravetz (cjkgeek)]

We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again!