oscillator output from CAN chip shutsdown after a short period
Bug #435007 reported by
Steven Welch
This bug affects 1 person
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
MAGE HeadBand |
New
|
Low
|
Max Murphy |
Bug Description
On some versions of the Headband Hardware the oscillator output from the MCP2515 shuts down after a short period. This causes the micro-controller to not have a clock signal resulting in failure.
This currently seems to be the result of poor trace placement on the board. This problem has not been exhibited on professional boards, more research must be executed before this can be considered a bug in firmware.
description: | updated |
Changed in headband: | |
importance: | Undecided → High |
importance: | High → Critical |
assignee: | nobody → Max Murphy (maxm-okstate) |
Changed in headband: | |
milestone: | none → 0.1.1 |
description: | updated |
Changed in headband: | |
importance: | Critical → Low |
To post a comment you must log in.
This currently seems to be the result of poor trace placement on the board. This problem has not been exhibited on professional boards, more research must be executed before this can be considered a bug in firmware.