Wrong firmware loaded for acx driver

[Leon]

My wireless lan card would not work. So I read " "/lib/firmware/2.6.15-20-386/acx/readme.txt". It said I had to load another firmware and report it. So here's my report.

This worked:
sudo modprobe acx firmware_ver=1.2.0.30

And this was the output requested:

leon@tim:/etc/modprobe.d$ lspci -vv && lspci -vvn && lsusb
0000:00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04)
        Subsystem: Intel Corporation: Unknown device 1969
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at <unassigned> (32-bit, prefetchable)
        Capabilities: <available only to root>

0000:00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) (prog-if 00 [VGA])
        Subsystem: Dell: Unknown device 00b8
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <available only to root>

0000:00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller]
        Subsystem: Dell: Unknown device 00b8
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (2500ns max)
        Region 0: Memory at f0000000 (32-bit, prefetchable) [disabled] [size=128M]
        Region 1: Memory at e0080000 (32-bit, non-prefetchable) [disabled] [size=512K]
        Capabilities: <available only to root>

0000:00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation Latitude C640
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 4: I/O ports at 1800 [size=32]

0000:00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation: Unknown device 4541
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 1820 [size=32]

0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=168
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: e0200000-e02fffff
        Prefetchable memory behind bridge: 30000000-32ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Intel Corporation Latitude C640
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at <ignored>
        Region 1: I/O ports at <ignored>
        Region 2: I/O ports at <ignored>
        Region 3: I/O ports at <ignored>
        Region 4: I/O ports at 1860 [size=16]
        Region 5: Memory at e0100000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
        Subsystem: Intel Corporation: Unknown device 4541
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 10
        Region 4: I/O ports at 1880 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
        Subsystem: Dell: Unknown device 00b8
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 10
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: I/O ports at 18c0 [size=64]

0000:00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
        Subsystem: Conexant MD56ORD V.92 MDC Modem
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 10
        Region 0: I/O ports at 2400 [size=256]
        Region 1: I/O ports at 2000 [size=128]

0000:02:01.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
        Subsystem: Dell: Unknown device 00b8
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 3000 [size=128]
        Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at 32000000 [disabled] [size=128K]
        Capabilities: <available only to root>

0000:02:04.0 CardBus bridge: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller
        Subsystem: Dell: Unknown device 00b8
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 30000000-31fff000 (prefetchable)
        Memory window 1: 34000000-35fff000
        I/O window 0: 00003400-000034ff
        I/O window 1: 00003800-000038ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
        16-bit legacy interface ports at 0001

0000:03:00.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface
        Subsystem: Unknown device 010e:16ec
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at 34020000 (32-bit, non-prefetchable) [size=8K]
        Region 1: Memory at 34000000 (32-bit, non-prefetchable) [size=128K]
        Capabilities: <available only to root>

0000:00:00.0 0600: 8086:3575 (rev 04)
        Subsystem: 8086:1969
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at <unassigned> (32-bit, prefetchable)
        Capabilities: <available only to root>

0000:00:02.0 0300: 8086:3577 (rev 04)
        Subsystem: 1028:00b8
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
        Region 1: Memory at e0000000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <available only to root>

0000:00:02.1 0380: 8086:3577
        Subsystem: 1028:00b8
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (2500ns max)
        Region 0: Memory at f0000000 (32-bit, prefetchable) [disabled] [size=128M]
        Region 1: Memory at e0080000 (32-bit, non-prefetchable) [disabled] [size=512K]
        Capabilities: <available only to root>

0000:00:1d.0 0c03: 8086:2482 (rev 02)
        Subsystem: 8086:4541
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 4: I/O ports at 1800 [size=32]

0000:00:1d.1 0c03: 8086:2484 (rev 02)
        Subsystem: 8086:4541
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 4: I/O ports at 1820 [size=32]

0000:00:1e.0 0604: 8086:2448 (rev 42)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=168
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: e0200000-e02fffff
        Prefetchable memory behind bridge: 30000000-32ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 0601: 8086:248c (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

0000:00:1f.1 0101: 8086:248a (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: 8086:4541
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at <ignored>
        Region 1: I/O ports at <ignored>
        Region 2: I/O ports at <ignored>
        Region 3: I/O ports at <ignored>
        Region 4: I/O ports at 1860 [size=16]
        Region 5: Memory at e0100000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 0c05: 8086:2483 (rev 02)
        Subsystem: 8086:4541
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 10
        Region 4: I/O ports at 1880 [size=32]

0000:00:1f.5 0401: 8086:2485 (rev 02)
        Subsystem: 1028:00b8
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 10
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: I/O ports at 18c0 [size=64]

0000:00:1f.6 0703: 8086:2486 (rev 02)
        Subsystem: 14f1:5421
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 10
        Region 0: I/O ports at 2400 [size=256]
        Region 1: I/O ports at 2000 [size=128]

0000:02:01.0 0200: 10b7:9200 (rev 78)
        Subsystem: 1028:00b8
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin A routed to IRQ 10
        Region 0: I/O ports at 3000 [size=128]
        Region 1: Memory at e0200000 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at 32000000 [disabled] [size=128K]
        Capabilities: <available only to root>

0000:02:04.0 0607: 1217:6972
        Subsystem: 1028:00b8
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at e0201000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
        Memory window 0: 30000000-31fff000 (prefetchable)
        Memory window 1: 34000000-35fff000
        I/O window 0: 00003400-000034ff
        I/O window 1: 00003800-000038ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
        16-bit legacy interface ports at 0001

0000:03:00.0 0280: 104c:9066
        Subsystem: 010e:16ec
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at 34020000 (32-bit, non-prefetchable) [size=8K]
        Region 1: Memory at 34000000 (32-bit, non-prefetchable) [size=128K]
        Capabilities: <available only to root>

Bus 001 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000

[Launchpad Janitor (janitor)]

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this linux-source-2.6.15 kernel bug to the new "linux" package. We appreciate your patience and understanding as we make this transition. Also, if you would be interested in testing the upcoming Intrepid Ibex 8.10 release, it is available at http://www.ubuntu.com/testing . Please let us know your results. Thanks!