(Per comments from Dennis Kaarsemaker on bug #40972, I am opening one bug per item not detected).
Installing DapperDrake Beta (April 20 release) on my desktop system, which is on the old-ish side, DapperDrake fails to detect my Creative Labs SB Audigy LS.
When I do 'lspci' or 'sudo lspci', there is no output.
Here is what dmesg says:
[4294667.296000] Linux version 2.6.15-20-386 (buildd@vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[4294667.296000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 127MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f5770
[4294667.296000] On node 0 totalpages: 262128
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 32752 pages, LIFO batch:7
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 VIA694 ) @ 0x000f70b0
[4294667.296000] ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
[4294667.296000] ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
[4294667.296000] ACPI: MADT (v001 VIA694 0x00000000 0x00000000) @ 0x3fff56c0
[4294667.296000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:8 APIC version 17
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 6:8 APIC version 17
[4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 998.629 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294667.449000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.453000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.559000] Memory: 1028684k/1048512k available (1973k kernel code, 19108k reserved, 601k data, 288k init, 131008k highmem)
[4294667.559000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.619000] Calibrating delay using timer specific routine.. 1998.09 BogoMIPS (lpj=999046)
[4294667.619000] Security Framework v1.0.0 initialized
[4294667.619000] SELinux: Disabled at boot.
[4294667.619000] Mount-cache hash table entries: 512
[4294667.619000] CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
[4294667.619000] CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
[4294667.619000] CPU: L1 I cache: 16K, L1 D cache: 16K
[4294667.619000] CPU: L2 cache: 256K
[4294667.619000] CPU serial number disabled.
[4294667.619000] CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
[4294667.619000] mtrr: v2.0 (20020519)
[4294667.619000] CPU: Intel Pentium III (Coppermine) stepping 0a
[4294667.619000] Enabling fast FPU save and restore... done.
[4294667.619000] Enabling unmasked SIMD FPU exception support... done.
[4294667.619000] Checking 'hlt' instruction... OK.
[4294667.623000] checking if image is initramfs... it is
[4294669.193000] Freeing initrd memory: 6787k freed
[4294669.218000] ACPI: Looking for DSDT ... not found!
[4294669.287000] ENABLING IO-APIC IRQs
[4294669.287000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294669.398000] NET: Registered protocol family 16
[4294669.398000] EISA bus registered
[4294669.398000] ACPI: bus type pci registered
[4294669.414000] PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=2
[4294669.414000] PCI: Using configuration type 1
[4294669.415000] ACPI: Subsystem revision 20051216
[4294669.426000] ACPI: Interpreter enabled
[4294669.426000] ACPI: Using IOAPIC for interrupt routing
[4294669.427000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.427000] PCI: Probing PCI hardware (bus 00)
[4294669.427000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294669.431000] PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
[4294669.431000] PCI quirk: region 5000-500f claimed by vt82c686 SMB
[4294669.431000] Boot video device is 0000:01:00.0
[4294669.432000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.433000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[4294669.434000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[4294669.434000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294669.435000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 *3 4 5 6 7 10 11 12 14 15)
[4294669.439000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.439000] pnp: PnP ACPI init
[4294669.445000] pnp: PnP ACPI: found 11 devices
[4294669.445000] PnPBIOS: Disabled by ACPI PNP
[4294669.445000] PCI: Using ACPI for IRQ routing
[4294669.445000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.446000] PCI: Bridge: 0000:00:01.0
[4294669.446000] IO window: disabled.
[4294669.446000] MEM window: e4000000-e6ffffff
[4294669.446000] PREFETCH window: d0000000-dfffffff
[4294669.446000] PCI: Bridge: 0000:00:0c.0
[4294669.446000] IO window: disabled.
[4294669.446000] MEM window: e8000000-e80fffff
[4294669.446000] PREFETCH window: disabled.
[4294669.446000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294669.447000] audit: initializing netlink socket (disabled)
[4294669.447000] audit(1145820526.446:1): initialized
[4294669.447000] highmem bounce pool size: 64 pages
[4294669.447000] VFS: Disk quotas dquot_6.5.1
[4294669.447000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.447000] Initializing Cryptographic API
[4294669.447000] io scheduler noop registered
[4294669.448000] io scheduler anticipatory registered
[4294669.448000] io scheduler deadline registered
[4294669.448000] io scheduler cfq registered
[4294669.448000] isapnp: Scanning for PnP cards...
[4294669.805000] isapnp: No Plug & Play device found
[4294669.836000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294669.836000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.836000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.836000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294669.836000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.841000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.842000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294669.842000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.842000] ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
[4294669.842000] ACPI: bus type ide registered
[4294669.842000] mice: PS/2 mouse device common for all mice
[4294669.843000] EISA: Probing bus 0 at eisa.0
[4294669.843000] Cannot allocate resource for EISA slot 1
[4294669.843000] Cannot allocate resource for EISA slot 4
[4294669.843000] Cannot allocate resource for EISA slot 5
[4294669.843000] Cannot allocate resource for EISA slot 6
[4294669.843000] EISA: Detected 0 cards.
[4294669.843000] NET: Registered protocol family 2
[4294669.852000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.852000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[4294669.858000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.859000] TCP: Hash tables configured (established 262144 bind 65536)
[4294669.859000] TCP reno registered
[4294669.859000] TCP bic registered
[4294669.859000] NET: Registered protocol family 1
[4294669.860000] NET: Registered protocol family 8
[4294669.860000] NET: Registered protocol family 20
[4294669.860000] Using IPI Shortcut mode
[4294669.860000] ACPI wakeup devices:
[4294669.860000] PCI0 USB0 USB1 MODM UAR1 ECP1
[4294669.860000] ACPI: (supports S0 S1 S4 S5)
[4294669.860000] Freeing unused kernel memory: 288k freed
[4294669.866000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.018000] vga16fb: initializing
[4294670.018000] vga16fb: mapped to 0xc00a0000
[4294670.218000] Console: switching to colour frame buffer device 80x25
[4294670.218000] fb0: VGA16 VGA frame buffer device
[4294671.248000] Capability LSM initialized
[4294672.513000] Probing IDE interface ide0...
[4294672.899000] hda: Maxtor 6B200P0, ATA DISK drive
[4294673.511000] Probing IDE interface ide1...
[4294674.305000] hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive
[4294674.917000] Probing IDE interface ide2...
[4294675.430000] Probing IDE interface ide3...
[4294675.943000] Probing IDE interface ide4...
[4294676.456000] Probing IDE interface ide5...
[4294676.969000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294676.969000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.984000] hda: max request size: 1024KiB
[4294677.005000] hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63
[4294677.007000] hda: cache flushes supported
[4294677.007000] hda: hda1 hda2 hda3
[4294677.047000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[4294677.047000] Uniform CD-ROM driver Revision: 3.20
[4294677.491000] EXT3-fs: mounted filesystem with ordered data mode.
[4294677.491000] kjournald starting. Commit interval 5 seconds
[4294711.820000] input: PC Speaker as /class/input/input1
[4294712.136000] logips2pp: Detected unknown logitech mouse model 11
[4294712.231000] input: PS/2 Logitech Mouse as /class/input/input2
[4294712.285000] ts: Compaq touchscreen protocol output
[4294712.436000] parport: PnPBIOS parport detected.
[4294712.436000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294712.451000] Real Time Clock Driver v1.12
[4294712.464000] parport0: Printer, HEWLETT-PACKARD DESKJET 895C
[4294712.566000] Floppy drive(s): fd0 is 1.44M
[4294712.580000] FDC 0 is a post-1991 82077
[4294712.903000] Adding 2048276k swap on /dev/hda3. Priority:-1 extents:1 across:2048276k
[4294712.992000] EXT3 FS on hda1, internal journal
[4294713.297000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294713.297000] md: bitmap version 4.39
[4294714.061000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
[4294714.617000] cdrom: open failed.
[4294715.484000] kjournald starting. Commit interval 5 seconds
[4294715.486000] EXT3 FS on hda2, internal journal
[4294715.486000] EXT3-fs: mounted filesystem with ordered data mode.
[4294717.575000] ACPI: Power Button (FF) [PWRF]
[4294717.575000] ACPI: Power Button (CM) [PWRB]
[4294717.806000] ibm_acpi: ec object not found
[4294717.855000] pcc_acpi: loading...
[4294728.380000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294728.380000] apm: overridden by ACPI.
[4294737.900000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294737.900000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294737.900000] ide: failed opcode was: 0xec
[4294737.994000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294737.995000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294737.995000] ide: failed opcode was: 0xec
[4294738.378000] Bluetooth: Core ver 2.8
[4294738.378000] NET: Registered protocol family 31
[4294738.378000] Bluetooth: HCI device and connection manager initialized
[4294738.378000] Bluetooth: HCI socket layer initialized
[4294738.440000] Bluetooth: L2CAP ver 2.8
[4294738.440000] Bluetooth: L2CAP socket layer initialized
[4294738.491000] Bluetooth: RFCOMM socket layer initialized
[4294738.491000] Bluetooth: RFCOMM TTY layer initialized
[4294738.491000] Bluetooth: RFCOMM ver 1.7
[4294773.437000] NET: Registered protocol family 10
[4294773.437000] lo: Disabled Privacy Extensions
[4294773.438000] IPv6 over IPv4 tunneling driver
[4295627.959000] cdrom: This disc doesn't have any tracks I recognize!
For comparison, here is what lspci and dmesg say when I boot up Mandriva:
$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 16)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:0b.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 20)
00:0c.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode) (rev 15)
00:0d.0 Multimedia audio controller: Creative Labs SB Audigy LS
00:0e.0 Mass storage controller: Triones Technologies, Inc. HPT366/368/370/370A/372/372N (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 6200 (rev a1)
02:08.0 USB Controller: NEC Corporation USB (rev 41)
02:08.1 USB Controller: NEC Corporation USB (rev 41)
02:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
02:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
$ dmesg
Linux version 2.6.12-17mdksmp (<email address hidden>) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #1 SMP Mon Feb 13 12:10:24 MST 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
user-defined physical RAM map:
user: 0000000000000000 - 000000000009fc00 (usable)
user: 000000000009fc00 - 00000000000a0000 (reserved)
user: 00000000000f0000 - 0000000000100000 (reserved)
user: 0000000000100000 - 000000003fff0000 (usable)
user: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
user: 000000003fff3000 - 0000000040000000 (ACPI data)
user: 00000000fec00000 - 00000000fec01000 (reserved)
user: 00000000fee00000 - 00000000fee01000 (reserved)
user: 00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f5770
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32752 pages, LIFO batch:15
DMI 2.3 present.
ACPI: RSDP (v000 VIA694 ) @ 0x000f70b0
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: MADT (v001 VIA694 0x00000000 0x00000000) @ 0x3fff56c0
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
Using ACPI for processor (LAPIC) configuration information
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
I/O APIC #2 Version 17 at 0xFEC00000.
Enabling APIC mode: Flat. Using 1 I/O APICs
Processors: 2
Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: auto BOOT_IMAGE=linux root=306 acpi=ht resume=/dev/hda5 mem=1024M splash=silent
bootsplash: silent mode.
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 998.795 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1033224k/1048512k available (2451k kernel code, 14508k reserved, 788k data, 296k init, 131008k highmem, 0k BadRAM)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1978.36 BogoMIPS (lpj=989184)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
Enabling SMP...
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay loop... 1994.75 BogoMIPS (lpj=997376)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3973.12 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=0
checking TSC synchronization across 2 CPUs: passed.
Enabling SMP...
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 00000001
groups: 00000001
domain 1: span 00000003
groups: 00000001 00000002
CPU1 attaching sched-domain:
domain 0: span 00000002
groups: 00000002
domain 1: span 00000003
groups: 00000002 00000001
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 480k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20050309
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Disabled
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:00.0
PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
audit: initializing netlink socket (disabled)
audit(1145807852.975:0): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (<email address hidden>)
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Enabling Via external APIC routing
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 3750k, total 262144k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d2b0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 27015 bytes,<6>...found (800x600, 26967 bytes, v3).
Console: switching to colour frame buffer device 93x30
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (<email address hidden>) and <email address hidden>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6B200P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
HPT370: IDE controller at PCI slot 0000:00:0e.0
HPT370: chipset revision 3
HPT37X: using 33MHz PCI clock
HPT370: 100% native mode on irq 11
ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
Probing IDE interface ide3...
hda: max request size: 1024KiB
hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(33)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
Starting balanced_irq
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
devfs_mk_dev: could not append to parent for md/0
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 428KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
input: AT Translated Set 2 keyboard on isa0060/serio0
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1250 $ Ben Collins <email address hidden>
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3] MMIO=[e8006000-e80067ff] Max Packet=[2048]
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <email address hidden>
logips2pp: Detected unknown logitech mouse model 11
input: PS/2 Logitech Mouse on isa0060/serio1
ieee1394: Host added: ID:BUS[0-00:1023] GUID[005042b5c00d1769]
ieee1394: Node added: ID:BUS[0-01:1023] GUID[0010b9f701038335]
ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
ieee1394: Node changed: 0-01:1023 -> 0-00:1023
ieee1394: Node changed: 0-00:1023 -> 0-01:1023
scsi0 : SCSI emulation for IEEE-1394 SBP-2 Devices
ieee1394: sbp2: Logged into SBP-2 device
ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
Vendor: Maxtor Model: OneTouch Rev: 0200
Type: Direct-Access ANSI SCSI revision: 06
SCSI device sda: 398295040 512-byte hdwr sectors (203927 MB)
sda: cache data unavailable
sda: assuming drive cache: write through
SCSI device sda: 398295040 512-byte hdwr sectors (203927 MB)
sda: cache data unavailable
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target1/lun0: p1
Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
ReiserFS: hda6: found reiserfs format "3.6" with standard journal
ReiserFS: hda6: using ordered data mode
ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda6: checking transaction log (hda6)
ReiserFS: hda6: Using r5 hash to sort names
Freeing unused kernel memory: 296k freed
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 3, io base 0x0000c400
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.3: irq 3, io base 0x0000c800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:02:08.0: OHCI Host Controller
ohci_hcd 0000:02:08.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:02:08.0: irq 3, io mem 0xe8007000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:02:08.1: OHCI Host Controller
ohci_hcd 0000:02:08.1: new USB bus registered, assigned bus number 4
ohci_hcd 0000:02:08.1: irq 5, io mem 0xe8004000
usb 3-2: new full speed USB device using ohci_hcd and address 2
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ehci_hcd 0000:02:08.2: EHCI Host Controller
ehci_hcd 0000:02:08.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:02:08.2: irq 10, io mem 0xe8005000
ehci_hcd 0000:02:08.2: USB 2.0 initialized, EHCI 0.95, driver 10 Dec 2004
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
ts: Compaq touchscreen protocol output
usb 5-3: new high speed USB device using ehci_hcd and address 3
hub 5-3:1.0: USB hub found
hub 5-3:1.0: 4 ports detected
usb 4-1: new full speed USB device using ohci_hcd and address 3
usb 3-2: USB disconnect, address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0xBA02
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
scsi1 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Adding 2216928k swap on /dev/hda5. Priority:-1 extents:1
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Vendor: HP Model: Photosmart 8100 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi1, channel 0, id 0, lun 0
usb-storage: device scan complete
ReiserFS: hda1: found reiserfs format "3.6" with standard journal
ReiserFS: hda1: using ordered data mode
ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda1: checking transaction log (hda1)
ReiserFS: hda1: Using r5 hash to sort names
ReiserFS: hda8: found reiserfs format "3.6" with standard journal
ReiserFS: hda8: using ordered data mode
ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda8: checking transaction log (hda8)
ReiserFS: hda8: Using r5 hash to sort names
Supermount version 2.0.4 for kernel 2.6
ReiserFS: hda9: found reiserfs format "3.6" with standard journal
ReiserFS: hda9: using ordered data mode
ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda9: checking transaction log (hda9)
ReiserFS: hda9: Using r5 hash to sort names
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
loop: loaded (max 8 devices)
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 27015 bytes,<6>...found (800x600, 26967 bytes, v3).
bootsplash: status on console 0 changed to on
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 260 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
Bridge firewalling registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
NET: Registered protocol family 17
Linux Tulip driver version 1.1.13 (May 11, 2002)
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
tulip0: MII transceiver #3 config 3100 status 7809 advertising 01e1.
eth0: Digital DS21140 Tulip rev 32 at 0001cc00, 00:00:C0:78:BC:F2, IRQ 10.
eth0: Setting full-duplex based on MII#3 link partner capability of 05e1.
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
parport0: Printer, HEWLETT-PACKARD DESKJET 895C
parport_pc: VIA parallel port: io=0x378, irq=7
lp0: using parport0 (interrupt-driven).
lp0: console ready
ppdev: user-space parallel port driver
ppdev0: registered pardevice
ppdev0: negotiated back to compatibility mode because user-space forgot
ppdev0: unregistered pardevice
lp0: ECP mode
lp0: ECP mode
lp0: ECP mode
lp0: ECP mode
Model 1006 Rev 00000000 Serial 10061102
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[3640]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[3640]: Module vmmon: initialized
/dev/vmnet: open called by PID 3681 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 3698 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03f0460(lo)
IPv6 over IPv4 tunneling driver
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005
NVRM: not using NVAGP, an AGPGART backend is loaded!
NVRM: not using NVAGP, an AGPGART backend is loaded!
/dev/vmnet: open called by PID 4223 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4222 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 4258 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 4255 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
eth0: no IPv6 routers present
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 9887 bytes, v3).
bootsplash: status on console 5 changed to on
In the future, please attach (don't comment inline) huge pastes, thanks. :)
What type of Audigy LS is it (pci/usb)? What does ``lspci -nv'' report regarding the Audigy LS when you boot into Mandriva?