Notebook (MSI S260) doesn't boot when USB HUB connected.
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux-source-2.6.15 (Ubuntu) |
Invalid
|
Medium
|
Unassigned |
Bug Description
Notebook (MSI S260) doest't boot when hub (D-LINK DUB-H7) is connected.
Kernel hangs on:
[4294669.147000] PCI: Transparent bridge - 0000:00:1e.0
Adding options to kernel (noacpi, noapic) doesn't help. With this options, kernel hangs on:
[4294669.175000] isapnp: Scanning for PnP cards...
(with my custom kernel 2.6.16 it helps, system boots.)
Notebook:
lspci:
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/
0000:00:1e.3 Modem: Intel Corporation 82801FB/
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
0000:00:1f.1 IDE interface: Intel Corporation 82801FB/
0000:00:1f.3 SMBus: Intel Corporation 82801FB/
0000:01:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/
0000:01:05.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21)
0000:01:05.2 0805: O2 Micro, Inc.: Unknown device 7120 (rev 01)
0000:01:05.3 Bridge: O2 Micro, Inc.: Unknown device 7130 (rev 01)
0000:01:05.4 FireWire (IEEE 1394): O2 Micro, Inc.: Unknown device 00f7 (rev 02)
0000:01:09.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
0000:02:00.0 Multimedia controller: Philips Semiconductors SAA7134 Video Broadcast Decoder (rev 01)
lsusb when hub is connected and my usb devices:
Bus 005 Device 011: ID 067b:3507 Prolific Technology, Inc. PL3507 ATAPI6 Bridge
Bus 005 Device 010: ID 0603:00f2 Novatek Microelectronics Corp.
Bus 005 Device 009: ID 0458:0039 KYE Systems Corp. (Mouse Systems)
Bus 005 Device 007: ID 2001:f103 D-Link Corp. [hex]
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 001: ID 0000:0000
dmesg:
[4294667.296000] Linux version 2.6.15-20-386 (buildd@vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
[4294667.296000] BIOS-e820: 000000003f7d0000 - 000000003f7de000 (ACPI data)
[4294667.296000] BIOS-e820: 000000003f7de000 - 000000003f800000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[4294667.296000] 119MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000ff780
[4294667.296000] On node 0 totalpages: 260048
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 30672 pages, LIFO batch:7
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 MSI ) @ 0x000f79b0
[4294667.296000] ACPI: RSDT (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d0000
[4294667.296000] ACPI: FADT (v002 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d0200
[4294667.296000] ACPI: MADT (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d0390
[4294667.296000] ACPI: MCFG (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d03f0
[4294667.296000] ACPI: OEMB (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7de040
[4294667.296000] ACPI: MCFG (v001 MSI 1012 0x10312005 MSFT 0x00000097) @ 0x3f7d4120
[4294667.296000] ACPI: SSDT (v001 AMI CPU1PM 0x00000001 INTL 0x02002026) @ 0x3f7d4160
[4294667.296000] ACPI: DSDT (v001 MSI 1012 0x10312005 INTL 0x02002026) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:13 APIC version 20
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 3f800000:c0380000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda7 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 1729.662 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.309000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.310000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.340000] Memory: 1020752k/1040192k available (1973k kernel code, 18652k reserved, 601k data, 288k init, 122688k highmem)
[4294668.340000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.400000] Calibrating delay using timer specific routine.. 3461.33 BogoMIPS (lpj=1730667)
[4294668.400000] Security Framework v1.0.0 initialized
[4294668.400000] SELinux: Disabled at boot.
[4294668.400000] Mount-cache hash table entries: 512
[4294668.400000] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[4294668.400000] CPU: After vendor identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
[4294668.400000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294668.400000] CPU: L2 cache: 2048K
[4294668.400000] CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000
[4294668.400000] mtrr: v2.0 (20020519)
[4294668.400000] CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
[4294668.400000] Enabling fast FPU save and restore... done.
[4294668.400000] Enabling unmasked SIMD FPU exception support... done.
[4294668.400000] Checking 'hlt' instruction... OK.
[4294668.404000] checking if image is initramfs... it is
[4294668.990000] Freeing initrd memory: 6395k freed
[4294668.996000] ACPI: Looking for DSDT ... not found!
[4294669.030000] ENABLING IO-APIC IRQs
[4294669.030000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294669.141000] NET: Registered protocol family 16
[4294669.141000] EISA bus registered
[4294669.141000] ACPI: bus type pci registered
[4294669.141000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[4294669.141000] ACPI: 2 duplicate MCFG table ignored.
[4294669.141000] PCI: Using MMCONFIG
[4294669.141000] ACPI: Subsystem revision 20051216
[4294669.144000] ACPI: Interpreter enabled
[4294669.144000] ACPI: Using IOAPIC for interrupt routing
[4294669.145000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.145000] PCI: Probing PCI hardware (bus 00)
[4294669.146000] Boot video device is 0000:00:02.0
[4294669.147000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[4294669.147000] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[4294669.147000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294669.147000] PCI: Transparent bridge - 0000:00:1e.0
[4294669.147000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.158000] ACPI: PCI Interrupt Routing Table [\_SB_.
[4294669.159000] ACPI: Embedded Controller [EC] (gpe 29) interrupt mode.
[4294669.164000] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 *10 11 12 14 15)
[4294669.164000] ACPI: PCI Interrupt Link [LNKB] (IRQs *4 5 6 7 10 11 12 14 15)
[4294669.165000] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 *7 10 11 12 14 15)
[4294669.165000] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 6 7 10 11 12 14 15)
[4294669.165000] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 *6 7 10 11 12 14 15)
[4294669.165000] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294669.166000] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *5 6 7 10 11 12 14 15)
[4294669.166000] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 *11 12 14 15)
[4294669.166000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.166000] pnp: PnP ACPI init
[4294669.168000] pnp: PnP ACPI: found 13 devices
[4294669.168000] PnPBIOS: Disabled by ACPI PNP
[4294669.168000] PCI: Using ACPI for IRQ routing
[4294669.168000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.174000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294669.174000] PCI: Bus 2, cardbus bridge: 0000:01:05.0
[4294669.174000] IO window: 0000e000-0000e0ff
[4294669.174000] IO window: 0000e400-0000e4ff
[4294669.174000] PREFETCH window: 40000000-41ffffff
[4294669.174000] MEM window: 44000000-45ffffff
[4294669.174000] PCI: Bridge: 0000:00:1e.0
[4294669.174000] IO window: e000-efff
[4294669.174000] MEM window: fbf00000-fbffffff
[4294669.174000] PREFETCH window: 40000000-42ffffff
[4294669.174000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294669.174000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 169
[4294669.174000] audit: initializing netlink socket (disabled)
[4294669.174000] audit(114579875
[4294669.174000] highmem bounce pool size: 64 pages
[4294669.175000] VFS: Disk quotas dquot_6.5.1
[4294669.175000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.175000] Initializing Cryptographic API
[4294669.175000] io scheduler noop registered
[4294669.175000] io scheduler anticipatory registered
[4294669.175000] io scheduler deadline registered
[4294669.175000] io scheduler cfq registered
[4294669.175000] isapnp: Scanning for PnP cards...
[4294669.532000] isapnp: No Plug & Play device found
[4294669.544000] PNP: PS/2 Controller [PNP0303:
[4294669.550000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294669.553000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294669.554000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294669.554000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294669.555000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294669.556000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.556000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294669.557000] ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 177
[4294669.557000] ACPI: PCI interrupt for device 0000:00:1e.3 disabled
[4294669.557000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294669.557000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294669.557000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294669.557000] ACPI: bus type ide registered
[4294669.558000] mice: PS/2 mouse device common for all mice
[4294669.559000] EISA: Probing bus 0 at eisa.0
[4294669.559000] EISA: Detected 0 cards.
[4294669.559000] NET: Registered protocol family 2
[4294669.570000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.570000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[4294669.572000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.572000] TCP: Hash tables configured (established 131072 bind 65536)
[4294669.572000] TCP reno registered
[4294669.572000] TCP bic registered
[4294669.572000] NET: Registered protocol family 1
[4294669.572000] NET: Registered protocol family 8
[4294669.572000] NET: Registered protocol family 20
[4294669.572000] Using IPI Shortcut mode
[4294669.572000] ACPI wakeup devices:
[4294669.572000] LAN AUDI MC97
[4294669.572000] ACPI: (supports S0 S3 S4 S5)
[4294669.572000] Freeing unused kernel memory: 288k freed
[4294669.578000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294669.632000] vga16fb: initializing
[4294669.632000] vga16fb: mapped to 0xc00a0000
[4294669.752000] Console: switching to colour frame buffer device 80x25
[4294669.752000] fb0: VGA16 VGA frame buffer device
[4294670.887000] Capability LSM initialized
[4294670.913000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294670.913000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294670.919000] ACPI: Thermal Zone [THRM] (39 C)
[4294671.263000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[4294671.263000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
[4294671.263000] ICH6: chipset revision 4
[4294671.263000] ICH6: not 100% native mode: will probe irqs later
[4294671.263000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
[4294671.263000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
[4294671.263000] Probing IDE interface ide0...
[4294671.527000] hda: TOSHIBA MK6025GAS, ATA DISK drive
[4294671.935000] hdb: PHILIPS DVD+/-RW SDVD8441, ATAPI CD/DVD-ROM drive
[4294671.986000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.986000] Probing IDE interface ide1...
[4294672.509000] hda: max request size: 128KiB
[4294672.557000] hda: 117210240 sectors (60011 MB), CHS=65535/16/63, UDMA(100)
[4294672.557000] hda: cache flushes supported
[4294672.557000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
[4294672.654000] hdb: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294672.654000] Uniform CD-ROM driver Revision: 3.20
[4294673.111000] usbcore: registered new driver usbfs
[4294673.111000] usbcore: registered new driver hub
[4294673.112000] USB Universal Host Controller Interface driver v2.3
[4294673.112000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
[4294673.112000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294673.112000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294673.113000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294673.113000] uhci_hcd 0000:00:1d.0: irq 193, io base 0x0000d880
[4294673.114000] hub 1-0:1.0: USB hub found
[4294673.114000] hub 1-0:1.0: 2 ports detected
[4294673.215000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 169
[4294673.215000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294673.215000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294673.215000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294673.215000] uhci_hcd 0000:00:1d.1: irq 169, io base 0x0000d800
[4294673.215000] hub 2-0:1.0: USB hub found
[4294673.215000] hub 2-0:1.0: 2 ports detected
[4294673.316000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294673.316000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294673.316000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294673.316000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294673.316000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000d480
[4294673.316000] hub 3-0:1.0: USB hub found
[4294673.316000] hub 3-0:1.0: 2 ports detected
[4294673.417000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 201
[4294673.417000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294673.417000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294673.417000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294673.417000] uhci_hcd 0000:00:1d.3: irq 201, io base 0x0000d400
[4294673.417000] hub 4-0:1.0: USB hub found
[4294673.417000] hub 4-0:1.0: 2 ports detected
[4294673.519000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
[4294673.519000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294673.519000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294673.519000] ehci_hcd 0000:00:1d.7: debug port 1
[4294673.519000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294673.519000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294673.519000] ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfbe3bc00
[4294673.522000] usb 2-2: new full speed USB device using uhci_hcd and address 2
[4294673.523000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294673.523000] hub 5-0:1.0: USB hub found
[4294673.523000] hub 5-0:1.0: 8 ports detected
[4294673.636000] Probing IDE interface ide1...
[4294674.022000] usb 2-2: new full speed USB device using uhci_hcd and address 3
[4294674.339000] Attempting manual resume
[4294674.377000] ReiserFS: hda7: found reiserfs format "3.6" with standard journal
[4294674.865000] ReiserFS: hda7: using ordered data mode
[4294674.874000] ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294674.874000] ReiserFS: hda7: checking transaction log (hda7)
[4294674.940000] ReiserFS: hda7: Using r5 hash to sort names
[4294684.080000] usb 5-3: new high speed USB device using ehci_hcd and address 3
[4294684.194000] hub 5-3:1.0: USB hub found
[4294684.194000] hub 5-3:1.0: 7 ports detected
[4294684.462000] usb 5-3.3: new low speed USB device using ehci_hcd and address 4
[4294684.711000] usb 5-3.4: new low speed USB device using ehci_hcd and address 5
[4294685.211000] usb 5-3.1: new high speed USB device using ehci_hcd and address 6
[4294686.907000] Linux agpgart interface v0.101 (c) Dave Jones
[4294686.911000] agpgart: Detected an Intel 915GM Chipset.
[4294686.912000] agpgart: Detected 7932K stolen memory.
[4294686.928000] agpgart: AGP aperture is 256M @ 0xd0000000
[4294687.739000] Bluetooth: Core ver 2.8
[4294687.739000] NET: Registered protocol family 31
[4294687.739000] Bluetooth: HCI device and connection manager initialized
[4294687.739000] Bluetooth: HCI socket layer initialized
[4294687.784000] hw_random: RNG not detected
[4294687.833000] Bluetooth: HCI USB driver ver 2.9
[4294687.834000] usbcore: registered new driver hci_usb
[4294687.911000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 209
[4294687.911000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[4294687.916000] input: PC Speaker as /class/input/input1
[4294687.988000] usbcore: registered new driver hiddev
[4294687.993000] input: Genius NetScroll+ Superior as /class/input/input2
[4294687.993000] input: USB HID v1.10 Mouse [Genius NetScroll+ Superior] on usb-0000:
[4294687.996000] input: NOVATEK USB Keyboard as /class/input/input3
[4294687.996000] input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:
[4294688.001000] input: NOVATEK USB Keyboard as /class/input/input4
[4294688.001000] input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:
[4294688.001000] usbcore: registered new driver usbhid
[4294688.001000] drivers/
[4294688.013000] SCSI subsystem initialized
[4294688.047000] Initializing USB Mass Storage driver...
[4294688.047000] scsi0 : SCSI emulation for USB Mass Storage devices
[4294688.047000] usb-storage: device found at 6
[4294688.047000] usb-storage: waiting for device to settle before scanning
[4294688.047000] usbcore: registered new driver usb-storage
[4294688.047000] USB Mass Storage support registered.
[4294688.160000] Real Time Clock Driver v1.12
[4294688.167000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xa56eb1, caps: 0x804713/0x0
[4294688.213000] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[4294688.666000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294688.686000] sdhci: Secure Digital Host Controller Interface driver, 0.10
[4294688.686000] sdhci: Copyright(c) Pierre Ossman
[4294688.724000] intel8x0_
[4294688.724000] intel8x0: clocking to 48000
[4294688.724000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 169
[4294688.724000] Yenta: CardBus bridge found at 0000:01:05.0 [1462:0121]
[4294688.724000] Yenta O2: res at 0x94/0xD4: 00/ea
[4294688.724000] Yenta O2: enabling read prefetch/write burst
[4294688.724000] 8139cp: pci dev 0000:01:03.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294688.724000] 8139cp: Try the "8139too" driver instead.
[4294688.780000] ieee80211_crypt: registered algorithm 'NULL'
[4294688.782000] ieee80211: 802.11 data/management
[4294688.782000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[4294688.846000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 169
[4294688.846000] Socket status: 30000820
[4294688.846000] pcmcia: parent PCI bridge I/O window: 0xe000 - 0xefff
[4294688.846000] cs: IO port probe 0xe000-0xefff: clean.
[4294688.847000] pcmcia: parent PCI bridge Memory window: 0xfbf00000 - 0xfbffffff
[4294688.847000] pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x42ffffff
[4294688.847000] ACPI: PCI Interrupt 0000:01:05.2[A] -> GSI 19 (level, low) -> IRQ 169
[4294688.897000] sdhci: ============== REGISTER DUMP ==============
[4294688.897000] sdhci: Sys addr: 0x00000000 | Version: 0x00002010
[4294688.897000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[4294688.897000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294688.897000] sdhci: Present: 0x01fa0000 | Host ctl: 0x00000000
[4294688.897000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[4294688.897000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000
[4294688.897000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[4294688.897000] sdhci: Int enab: 0x01ff00cf | Sig enab: 0x01ff00cf
[4294688.897000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294688.897000] sdhci: Caps: 0x038021a1 | Max curr: 0x00ffffff
[4294688.897000] sdhci: =======
[4294688.947000] mmc0: SDHCI at 0xfbfff800 irq 169 DMA
[4294689.182000] ieee1394: Initialized config rom entry `ip1394'
[4294689.185000] ohci1394: $Rev: 1313 $ Ben Collins <email address hidden>
[4294689.185000] ACPI: PCI Interrupt 0000:01:05.4[A] -> GSI 19 (level, low) -> IRQ 169
[4294689.185000] ohci1394: fw-host0: Unexpected PCI resource length of 1000!
[4294689.189000] ts: Compaq touchscreen protocol output
[4294689.224000] 8139too Fast Ethernet driver 0.9.27
[4294689.225000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 217
[4294689.226000] eth0: RealTek RTL8139 at 0xf8bdcc00, 00:13:d3:af:dd:ae, IRQ 217
[4294689.226000] eth0: Identified 8139 chip type 'RTL-8101'
[4294689.258000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
[4294689.258000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[4294689.263000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[fbffd000-
[4294689.267000] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 209
[4294689.267000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4294689.520000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[4294689.613000] pccard: CardBus card inserted into slot 0
[4294689.631000] cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x370-0x377
[4294689.633000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[4294689.633000] cs: IO port probe 0x820-0x8ff: clean.
[4294689.633000] cs: IO port probe 0xc00-0xcf7: clean.
[4294689.634000] cs: IO port probe 0xa00-0xaff: clean.
[4294689.679000] Linux video capture interface: v1.00
[4294689.764000] saa7130/34: v4l2 driver version 0.2.14 loaded
[4294689.764000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
[4294689.764000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 169
[4294689.764000] saa7134[0]: found at 0000:02:00.0, rev: 1, irq: 169, latency: 0, mmio: 0x44000000
[4294689.764000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[4294689.764000] saa7134[0]: subsystem: 1461:b7e9, board: AVerMedia Cardbus TV/Radio (E500) [card=46,insmod option]
[4294689.764000] saa7134[0]: board init: gpio is 0
[4294689.797000] ieee80211_crypt: registered algorithm 'WEP'
[4294689.898000] saa7134[0]: i2c eeprom 00: 61 14 e9 b7 ff ff ff ff ff ff ff ff ff ff ff ff
[4294689.898000] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294689.898000] saa7134[0]: i2c eeprom 20: ff d1 fb ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294689.898000] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294689.898000] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294689.898000] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294689.898000] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294689.898000] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294689.952000] tuner 0-0060: Returned more than 5 bytes. It is not a TEA5767
[4294689.952000] tuner 0-0060: chip found @ 0xc0 (saa7134[0])
[4294689.952000] tuner 0-0060: type set to 41 (Philips PAL_MK (FI1216 MK))
[4294689.954000] tuner 0-0061: chip found @ 0xc2 (saa7134[0])
[4294689.956000] saa7134[0]: registered device video0 [v4l2]
[4294689.956000] saa7134[0]: registered device vbi0
[4294689.956000] saa7134[0]: registered device radio0
[4294689.984000] saa7134 ALSA driver for DMA sound loaded
[4294689.984000] saa7134[0]/alsa: saa7134[0] at 0x44000000 irq 169 registered as card -1
[4294690.550000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00dc1000bf
[4294690.655000] lp: driver loaded but no devices found
[4294690.670000] sbp2: $Rev: 1306 $ Ben Collins <email address hidden>
[4294690.670000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294690.670000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294690.995000] tda9887 0-0042: chip found @ 0x84 (saa7134[0])
[4294691.070000] Adding 2104472k swap on /dev/hda6. Priority:-1 extents:1 across:2104472k
[4294693.047000] Vendor: WDC WD80 Model: 0JB-00FMA0 Rev: 13.0
[4294693.047000] Type: Direct-Access ANSI SCSI revision: 00
[4294693.048000] usb-storage: device scan complete
[4294693.243000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294693.243000] sda: assuming drive cache: write through
[4294693.244000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294693.244000] sda: assuming drive cache: write through
[4294693.244000] sda: sda1 < sda5 >
[4294693.256000] sd 0:0:0:0: Attached scsi disk sda
[4294693.277000] NET: Registered protocol family 17
[4294693.280000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294693.495000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294693.495000] md: bitmap version 4.39
[4294694.001000] NET: Registered protocol family 10
[4294694.001000] lo: Disabled Privacy Extensions
[4294694.001000] IPv6 over IPv4 tunneling driver
[4294694.721000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
[4294695.370000] cdrom: open failed.
[4294704.926000] eth1: no IPv6 routers present
[4294705.692000] ReiserFS: hda8: found reiserfs format "3.6" with standard journal
[4294709.350000] ReiserFS: hda8: using ordered data mode
[4294709.372000] ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294709.372000] ReiserFS: hda8: checking transaction log (hda8)
[4294709.412000] ReiserFS: hda8: Using r5 hash to sort names
[4294709.509000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4294709.599000] NTFS volume version 3.1.
[4294711.281000] ACPI: AC Adapter [ADP1] (on-line)
[4294711.324000] pcc_acpi: loading...
[4294711.334000] ACPI: Power Button (FF) [PWRF]
[4294711.334000] ACPI: Power Button (CM) [PWRB]
[4294711.334000] ACPI: Lid Switch [LID0]
[4294711.334000] ACPI: Sleep Button (CM) [SLPB]
[4294711.368000] ibm_acpi: ec object not found
[4294711.382000] ACPI: Battery Slot [BAT1] (battery absent)
[4294711.402000] ACPI: Video Device [IGFX] (multi-head: yes rom: no post: no)
[4294720.088000] [drm] Initialized drm 1.0.0 20040925
[4294720.093000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201
[4294720.094000] [drm] Initialized i915 1.1.0 20040405 on minor 0:
[4294720.094000] mtrr: base(0xd0020000) is not aligned on a size(0x640000) boundary
[4294723.930000] apm: BIOS not found.
[4294724.314000] hdb: drive_cmd: status=0x41 { DriveReady Error }
[4294724.314000] hdb: drive_cmd: error=0x04 { AbortedCommand }
[4294724.314000] ide: failed opcode was: 0xec
[4294724.447000] hdb: drive_cmd: status=0x41 { DriveReady Error }
[4294724.447000] hdb: drive_cmd: error=0x04 { AbortedCommand }
[4294724.447000] ide: failed opcode was: 0xec
[4294725.102000] Bluetooth: L2CAP ver 2.8
[4294725.102000] Bluetooth: L2CAP socket layer initialized
[4294725.202000] Bluetooth: RFCOMM socket layer initialized
[4294725.202000] Bluetooth: RFCOMM TTY layer initialized
[4294725.202000] Bluetooth: RFCOMM ver 1.7
[4294774.212000] mtrr: base(0xd0660000) is not aligned on a size(0x640000) boundary
[4294800.786000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4295108.659000] ibm_acpi: ec object not found
[4295238.573000] ibm_acpi: ec object not found
[4297334.655000] ACPI: PCI interrupt for device 0000:01:03.0 disabled
[4297334.700000] ACPI: PCI interrupt for device 0000:01:09.0 disabled
[4297337.205000] Stopping tasks: =======
[4297337.207000] hci_usb 2-2:1.1: no suspend for driver hci_usb?
[4297337.207000] hci_usb 2-2:1.0: no suspend for driver hci_usb?
[4297337.208000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.
[4297337.208000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.
[4297337.209000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.
[4297337.209000] ACPI-0517: *** Error: Method parse/execution failed [\_SB_.
[4297337.689000] ACPI: PCI interrupt for device 0000:01:05.0 disabled
[4297337.689000] ACPI: PCI interrupt for device 0000:00:1e.2 disabled
[4297337.689000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[4297337.700000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[4297337.700000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[4297337.700000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[4297337.700000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[4297337.700000] Back to C!
[4303081.795000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 201
[4303081.795000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 193
[4303081.795000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4303081.795000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 169
[4303081.795000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4303081.795000] mmc0: Got command interrupt even though no command operation was in progress.
[4303081.795000] mmc0: Please report this to <email address hidden>.
[4303081.795000] sdhci: ============== REGISTER DUMP ==============
[4303081.795000] sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff
[4303081.795000] sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff
[4303081.795000] sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff
[4303081.795000] sdhci: Present: 0xffffffff | Host ctl: 0x000000ff
[4303081.795000] sdhci: Power: 0x000000ff | Blk gap: 0x000000ff
[4303081.795000] sdhci: Walk up: 0x000000ff | Clock: 0x0000ffff
[4303081.795000] sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff
[4303081.795000] sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff
[4303081.795000] sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff
[4303081.795000] sdhci: Caps: 0xffffffff | Max curr: 0xffffffff
[4303081.795000] sdhci: =======
[4303081.795000] mmc0: Unexpected card interrupt. Please report this to <email address hidden>.
[4303081.795000] sdhci: ============== REGISTER DUMP ==============
[4303081.795000] sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff
[4303081.795000] sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff
[4303081.795000] sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff
[4303081.795000] sdhci: Present: 0xffffffff | Host ctl: 0x000000ff
[4303081.795000] sdhci: Power: 0x000000ff | Blk gap: 0x000000ff
[4303081.795000] sdhci: Walk up: 0x000000ff | Clock: 0x0000ffff
[4303081.795000] sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff
[4303081.795000] sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff
[4303081.795000] sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff
[4303081.795000] sdhci: Caps: 0xffffffff | Max curr: 0xffffffff
[4303081.795000] sdhci: =======
[4303081.795000] mmc0: Unexpected bus power interrupt. Please report this to <email address hidden>.
[4303081.795000] sdhci: ============== REGISTER DUMP ==============
[4303081.795000] sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff
[4303081.795000] sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff
[4303081.795000] sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff
[4303081.795000] sdhci: Present: 0xffffffff | Host ctl: 0x000000ff
[4303081.795000] sdhci: Power: 0x000000ff | Blk gap: 0x000000ff
[4303081.795000] sdhci: Walk up: 0x000000ff | Clock: 0x0000ffff
[4303081.795000] sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff
[4303081.795000] sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff
[4303081.795000] sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff
[4303081.795000] sdhci: Caps: 0xffffffff | Max curr: 0xffffffff
[4303081.795000] sdhci: =======
[4303081.795000] mmc0: Unexpected auto CMD12 error. Please report this to <email address hidden>.
[4303081.795000] sdhci: ============== REGISTER DUMP ==============
[4303081.795000] sdhci: Sys addr: 0xffffffff | Version: 0x0000ffff
[4303081.795000] sdhci: Blk size: 0x0000ffff | Blk cnt: 0x0000ffff
[4303081.795000] sdhci: Argument: 0xffffffff | Trn mode: 0x0000ffff
[4303081.795000] sdhci: Present: 0xffffffff | Host ctl: 0x000000ff
[4303081.795000] sdhci: Power: 0x000000ff | Blk gap: 0x000000ff
[4303081.795000] sdhci: Walk up: 0x000000ff | Clock: 0x0000ffff
[4303081.795000] sdhci: Timeout: 0x000000ff | Int stat: 0xffffffff
[4303081.795000] sdhci: Int enab: 0xffffffff | Sig enab: 0xffffffff
[4303081.795000] sdhci: AC12 err: 0x0000ffff | Slot int: 0x0000ffff
[4303081.795000] sdhci: Caps: 0xffffffff | Max curr: 0xffffffff
[4303081.795000] sdhci: =======
[4303081.796000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[4303081.796000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4303081.796000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 201
[4303081.796000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4303081.807000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 193
[4303081.807000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4303081.810000] ehci_hcd 0000:00:1d.7: debug port 1
[4303081.810000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4303081.814000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4303081.814000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4303081.814000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 209
[4303081.814000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[4303082.068000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
[4303082.068000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 169
[4303082.068000] Yenta O2: res at 0x94/0xD4: 00/ea
[4303082.068000] Yenta O2: enabling read prefetch/write burst
[4303082.771000] ACPI: PCI Interrupt 0000:01:05.2[A] -> GSI 19 (level, low) -> IRQ 169
[4303082.771000] PCI: Enabling device 0000:01:05.4 (0080 -> 0082)
[4303082.771000] ACPI: PCI Interrupt 0000:01:05.4[A] -> GSI 19 (level, low) -> IRQ 169
[4303083.419000] hdb: set_drive_
[4303083.419000] ide: failed opcode was: unknown
[4303083.559000] hci_usb 2-2:1.0: no resume for driver hci_usb?
[4303083.559000] hci_usb 2-2:1.1: no resume for driver hci_usb?
[4303083.559000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 169
[4303083.559000] tda9887 0-0042: i2c i/o error: rc == -5 (should be 4)
[4303083.559000] Restarting tasks... done
[4303083.663000] usb 2-2: USB disconnect, address 3
[4303084.017000] usb 5-3: USB disconnect, address 3
[4303084.017000] usb 5-3.1: USB disconnect, address 6
[4303084.027000] usb 5-3.3: USB disconnect, address 4
[4303084.028000] usb 5-3.4: USB disconnect, address 5
[4303084.234000] usb 5-3: new high speed USB device using ehci_hcd and address 7
[4303084.297000] 0:0:0:0: rejecting I/O to dead device
[4303084.297000] FAT: bread failed in fat_clusters_flush
[4303084.348000] hub 5-3:1.0: USB hub found
[4303084.348000] hub 5-3:1.0: 7 ports detected
[4303084.771000] usb 5-3.3: new low speed USB device using ehci_hcd and address 9
[4303084.857000] input: Genius NetScroll+ Superior as /class/input/input6
[4303084.857000] input: USB HID v1.10 Mouse [Genius NetScroll+ Superior] on usb-0000:
[4303085.025000] usb 5-3.4: new low speed USB device using ehci_hcd and address 10
[4303085.108000] input: NOVATEK USB Keyboard as /class/input/input7
[4303085.109000] input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:
[4303085.114000] input: NOVATEK USB Keyboard as /class/input/input8
[4303085.114000] input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:
[4303085.321000] usb 2-2: new full speed USB device using uhci_hcd and address 4
[4303085.651000] usb 5-3.1: new high speed USB device using ehci_hcd and address 11
[4303085.866000] scsi1 : SCSI emulation for USB Mass Storage devices
[4303085.866000] usb-storage: device found at 11
[4303085.866000] usb-storage: waiting for device to settle before scanning
[4303087.268000] 8139too Fast Ethernet driver 0.9.27
[4303087.268000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 22 (level, low) -> IRQ 217
[4303087.272000] eth0: RealTek RTL8139 at 0xf8bd0c00, 00:13:d3:af:dd:ae, IRQ 217
[4303087.272000] eth0: Identified 8139 chip type 'RTL-8101'
[4303087.282000] ieee80211: 802.11 data/management
[4303087.282000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[4303087.286000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
[4303087.287000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[4303087.288000] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 209
[4303087.288000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4303087.438000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[4303087.450000] pcmcia: Detected deprecated PCMCIA ioctl usage.
[4303087.450000] pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools.
[4303087.450000] pcmcia: see http://
[4303087.508000] eth1: NETDEV_TX_BUSY returned; driver should report queue full via ieee_device-
[4303088.283000] ACPI: Power Button (FF) [PWRF]
[4303088.284000] ACPI: Power Button (CM) [PWRB]
[4303088.284000] ACPI: Lid Switch [LID0]
[4303088.284000] ACPI: Sleep Button (CM) [SLPB]
[4303088.328000] ACPI: Thermal Zone [THRM] (35 C)
[4303088.354000] ACPI: AC Adapter [ADP1] (on-line)
[4303088.368000] ACPI: Battery Slot [BAT1] (battery absent)
[4303090.866000] Vendor: WDC WD80 Model: 0JB-00FMA0 Rev: 13.0
[4303090.866000] Type: Direct-Access ANSI SCSI revision: 00
[4303090.868000] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
[4303090.868000] sdb: assuming drive cache: write through
[4303090.869000] SCSI device sdb: 156301488 512-byte hdwr sectors (80026 MB)
[4303090.869000] sdb: assuming drive cache: write through
[4303090.869000] sdb: sdb1 < sdb5 >
[4303090.894000] sd 1:0:0:0: Attached scsi disk sdb
[4303090.894000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[4303090.895000] usb-storage: device scan complete
[4303091.231000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4303097.855000] eth1: no IPv6 routers present
Problem is with my USB Keyboard, when connected direct to notebook, system boots without problems.