Bad Totem/DVD Support for Toshiba A105-S4004

[Joseph Smidt]

I have a fresh install of Dapper Beta. I put in a DVD. Totem poped up with this error:

Totem could not play 'dvd:///media/cdrom0'. Locaton not found.

I had issues with my laptob reading the install cd so I am sure it is a hardware problem, but I don't know what package to send the bug reprt to. But at least Totem is not working.

This is my computer: http://www.mobilewhack.com/reviews/toshiba_satellite_a105-s4004_notebook

I have attached dmesg and lspci -vv. Please send any other tests I could run my way. Thanks.

dmesg:

[4294667.296000] Linux version 2.6.15-20-686 (buildd@vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Tue Apr 4 18:37:00 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003f670000 (usable)
[4294667.296000] BIOS-e820: 000000003f670000 - 000000003f686000 (ACPI data)
[4294667.296000] BIOS-e820: 000000003f686000 - 000000003f700000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[4294667.296000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[4294667.296000] 118MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f65d0
[4294667.296000] On node 0 totalpages: 259696
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 30320 pages, LIFO batch:7
[4294667.296000] DMI present.
[4294667.296000] ACPI: RSDP (v000 TOSINV ) @ 0x000f6520
[4294667.296000] ACPI: RSDT (v001 TOSINV Capell00 0x06040000 LTP 0x00000000) @ 0x3f67e26a
[4294667.296000] ACPI: FADT (v001 TOSINV CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f685dee
[4294667.296000] ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f685e62
[4294667.296000] ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f685eca
[4294667.296000] ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x3f685f02
[4294667.296000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3f685fd8
[4294667.296000] ACPI: MADT (v001 TOSINV APIC 0x06040000 LTP 0x00000000) @ 0x3f685f70
[4294667.296000] ACPI: SSDT (v001 SataRe SataPri 0x00001000 INTL 0x20050624) @ 0x3f67f2cc
[4294667.296000] ACPI: SSDT (v001 SataRe SataSec 0x00001000 INTL 0x20050624) @ 0x3f67ec3a
[4294667.296000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x3f67e2b2
[4294667.296000] ACPI: DSDT (v001 TOSINV CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x1008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: 2 duplicate APIC table ignored.
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:14 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 6:14 APIC version 20
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1 already used, trying 2
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda2 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Console: colour VGA+ 80x25
[4294667.296000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.296000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.296000] Memory: 1017764k/1038784k available (2091k kernel code, 20276k reserved, 591k data, 328k init, 121280k highmem)
[4294667.296000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.296000] hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
[4294667.296000] hpet0: 3 64-bit timers, 14318180 Hz
[4294667.296000] Using HPET for base-timer
[4294667.296000] Using HPET for gettimeofday
[4294667.296000] Detected 1662.557 MHz processor.
[4294667.296000] Using hpet for high-res timesource
[4294667.357000] Calibrating delay using timer specific routine.. 3328.22 BogoMIPS (lpj=1664111)
[4294667.357000] Security Framework v1.0.0 initialized
[4294667.357000] SELinux: Disabled at boot.
[4294667.357000] Mount-cache hash table entries: 512
[4294667.357000] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
[4294667.357000] CPU: After vendor identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
[4294667.357000] monitor/mwait feature present.
[4294667.357000] using mwait in idle threads.
[4294667.357000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294667.357000] CPU: L2 cache: 2048K
[4294667.357000] CPU: Hyper-Threading is disabled
[4294667.357000] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00000040 0000c1a9 00000000 00000000
[4294667.357000] mtrr: v2.0 (20020519)
[4294667.357000] Enabling fast FPU save and restore... done.
[4294667.357000] Enabling unmasked SIMD FPU exception support... done.
[4294667.357000] Checking 'hlt' instruction... OK.
[4294667.361000] SMP alternatives: switching to UP code
[4294667.361000] checking if image is initramfs... it is
[4294667.944000] Freeing initrd memory: 6571k freed
[4294667.949000] ACPI: Looking for DSDT ... not found!
[4294668.012000] CPU0: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
[4294668.012000] SMP alternatives: switching to SMP code
[4294668.013000] Booting processor 1/1 eip 3000
[4294668.023000] Initializing CPU#1
[4294668.084000] Calibrating delay using timer specific routine.. 3325.11 BogoMIPS (lpj=1662558)
[4294668.084000] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
[4294668.084000] CPU: After vendor identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
[4294668.084000] monitor/mwait feature present.
[4294668.084000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294668.084000] CPU: L2 cache: 2048K
[4294668.084000] CPU: Hyper-Threading is disabled
[4294668.084000] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00000040 0000c1a9 00000000 00000000
[4294668.084000] CPU1: Intel Genuine Intel(R) CPU T2300 @ 1.66GHz stepping 08
[4294668.084000] Total of 2 processors activated (6653.33 BogoMIPS).
[4294668.084000] ENABLING IO-APIC IRQs
[4294668.084000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.197000] checking TSC synchronization across 2 CPUs: passed.
[4294668.198000] Brought up 2 CPUs
[4294668.198000] NET: Registered protocol family 16
[4294668.198000] EISA bus registered
[4294668.198000] ACPI: bus type pci registered
[4294668.198000] PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=7
[4294668.198000] PCI: Using MMCONFIG
[4294668.198000] ACPI: Subsystem revision 20051216
[4294668.202000] ACPI: Interpreter enabled
[4294668.202000] ACPI: Using IOAPIC for interrupt routing
[4294668.202000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.202000] PCI: Probing PCI hardware (bus 00)
[4294668.270000] Boot video device is 0000:00:02.0
[4294668.270000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294668.272000] PCI: Transparent bridge - 0000:00:1e.0
[4294668.272000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.384000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[4294668.385000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[4294668.385000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[4294668.386000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[4294668.409000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[4294668.409000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[4294668.410000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[4294668.410000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[4294668.410000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[4294668.410000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[4294668.411000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[4294668.411000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[4294668.411000] ACPI: Embedded Controller [EC0] (gpe 22) interrupt mode.
[4294668.457000] ACPI: Power Resource [FN00] (off)
[4294668.457000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.457000] pnp: PnP ACPI init
[4294668.524000] pnp: PnP ACPI: found 11 devices
[4294668.524000] PnPBIOS: Disabled by ACPI PNP
[4294668.524000] PCI: Using ACPI for IRQ routing
[4294668.524000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294668.554000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294668.554000] PCI: Bridge: 0000:00:1c.0
[4294668.554000] IO window: disabled.
[4294668.554000] MEM window: disabled.
[4294668.554000] PREFETCH window: disabled.
[4294668.554000] PCI: Bridge: 0000:00:1c.1
[4294668.554000] IO window: 2000-2fff
[4294668.554000] MEM window: d8000000-d9ffffff
[4294668.554000] PREFETCH window: d2000000-d3ffffff
[4294668.554000] PCI: Bridge: 0000:00:1c.2
[4294668.554000] IO window: 3000-3fff
[4294668.554000] MEM window: da000000-dbffffff
[4294668.554000] PREFETCH window: d4000000-d5ffffff
[4294668.554000] PCI: Bus 8, cardbus bridge: 0000:07:06.0
[4294668.554000] IO window: 00004400-000044ff
[4294668.554000] IO window: 00004800-000048ff
[4294668.554000] PREFETCH window: 50000000-51ffffff
[4294668.554000] MEM window: 52000000-53ffffff
[4294668.554000] PCI: Bridge: 0000:00:1e.0
[4294668.554000] IO window: 4000-4fff
[4294668.554000] MEM window: dc000000-dc0fffff
[4294668.554000] PREFETCH window: 50000000-51ffffff
[4294668.554000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294668.554000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294668.554000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
[4294668.554000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294668.554000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294668.554000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294668.554000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294668.554000] PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
[4294668.554000] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 185
[4294668.554000] Simple Boot Flag at 0x36 set to 0x1
[4294668.554000] audit: initializing netlink socket (disabled)
[4294668.554000] audit(1145548732.552:1): initialized
[4294668.555000] highmem bounce pool size: 64 pages
[4294668.555000] VFS: Disk quotas dquot_6.5.1
[4294668.555000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.555000] Initializing Cryptographic API
[4294668.555000] io scheduler noop registered
[4294668.555000] io scheduler anticipatory registered
[4294668.555000] io scheduler deadline registered
[4294668.555000] io scheduler cfq registered
[4294674.055000] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[4294674.055000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294674.055000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294674.055000] assign_interrupt_mode Found MSI capability
[4294674.055000] Allocate Port Service[pcie00]
[4294674.055000] Allocate Port Service[pcie02]
[4294674.055000] Allocate Port Service[pcie03]
[4294674.056000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 177
[4294674.056000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294674.056000] assign_interrupt_mode Found MSI capability
[4294674.056000] Allocate Port Service[pcie00]
[4294674.056000] Allocate Port Service[pcie02]
[4294674.056000] Allocate Port Service[pcie03]
[4294674.056000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294674.056000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294674.056000] assign_interrupt_mode Found MSI capability
[4294674.056000] Allocate Port Service[pcie00]
[4294674.056000] Allocate Port Service[pcie02]
[4294674.056000] Allocate Port Service[pcie03]
[4294674.056000] isapnp: Scanning for PnP cards...
[4294674.415000] isapnp: No Plug & Play device found
[4294674.431000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294674.433000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294674.434000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294674.434000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294674.435000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294674.435000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294674.435000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294674.435000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294674.437000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294674.437000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294674.437000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294674.437000] ACPI: bus type ide registered
[4294674.438000] mice: PS/2 mouse device common for all mice
[4294674.438000] EISA: Probing bus 0 at eisa.0
[4294674.438000] Cannot allocate resource for EISA slot 1
[4294674.438000] Cannot allocate resource for EISA slot 2
[4294674.438000] Cannot allocate resource for EISA slot 3
[4294674.438000] Cannot allocate resource for EISA slot 4
[4294674.438000] EISA: Detected 0 cards.
[4294674.438000] NET: Registered protocol family 2
[4294674.449000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294674.449000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[4294674.451000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[4294674.451000] TCP: Hash tables configured (established 131072 bind 65536)
[4294674.451000] TCP reno registered
[4294674.451000] TCP bic registered
[4294674.451000] NET: Registered protocol family 1
[4294674.451000] NET: Registered protocol family 8
[4294674.451000] NET: Registered protocol family 20
[4294674.451000] Starting balanced_irq
[4294674.451000] Using IPI No-Shortcut mode
[4294674.451000] ACPI wakeup devices:
[4294674.451000] LID HDEF PXS1 PXS2 PXS3 LANC
[4294674.451000] ACPI: (supports S0 S3 S4 S5)
[4294674.451000] Freeing unused kernel memory: 328k freed
[4294674.519000] vga16fb: initializing
[4294674.519000] vga16fb: mapped to 0xc00a0000
[4294674.602000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294674.632000] Console: switching to colour frame buffer device 80x25
[4294674.632000] fb0: VGA16 VGA frame buffer device
[4294675.653000] Capability LSM initialized
[4294675.708000] ACPI: Fan [FAN0] (off)
[4294675.712000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294675.712000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294675.714000] ACPI: CPU1 (power states: C1[C1] C2[C2])
[4294675.714000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294675.721000] ACPI: Thermal Zone [TZ00] (48 C)
[4294675.721000] ACPI: Thermal Zone [TZ01] (50 C)
[4294676.180000] SCSI subsystem initialized
[4294676.181000] libata version 1.20 loaded.
[4294676.182000] ata_piix 0000:00:1f.2: version 1.05
[4294676.182000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
[4294676.182000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294676.182000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
[4294676.336000] ata1: dev 0 cfg 49:2f00 82:746b 83:7d09 84:6023 85:7469 86:3d09 87:6023 88:203f
[4294676.336000] ata1: dev 0 ATA-6, max UDMA/100, 195371568 sectors: LBA48
[4294676.336000] ata1: dev 0 configured for UDMA/100
[4294676.336000] scsi0 : ata_piix
[4294676.336000] Vendor: ATA Model: TOSHIBA MK1032GS Rev: AS02
[4294676.336000] Type: Direct-Access ANSI SCSI revision: 05
[4294676.336000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
[4294676.641000] ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
[4294676.641000] ata2: dev 0 ATAPI, max UDMA/33
[4294676.641000] ata2(0): applying bridge limits
[4294676.642000] ata2: dev 0 configured for UDMA/33
[4294676.642000] scsi1 : ata_piix
[4294676.644000] Vendor: MATSHITA Model: DVD-RAM UJ-841S Rev: 1.50
[4294676.644000] Type: CD-ROM ANSI SCSI revision: 05
[4294676.651000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[4294676.651000] SCSI device sda: drive cache: write back
[4294676.651000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[4294676.651000] SCSI device sda: drive cache: write back
[4294676.651000] sda: sda1 sda2 sda3 < sda5 >
[4294676.711000] sd 0:0:0:0: Attached scsi disk sda
[4294676.912000] usbcore: registered new driver usbfs
[4294676.913000] usbcore: registered new driver hub
[4294676.915000] USB Universal Host Controller Interface driver v2.3
[4294676.916000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
[4294676.916000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294676.916000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294676.917000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294676.917000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x00001820
[4294676.919000] hub 1-0:1.0: USB hub found
[4294676.919000] hub 1-0:1.0: 2 ports detected
[4294677.020000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
[4294677.020000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294677.020000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294677.020000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294677.020000] uhci_hcd 0000:00:1d.1: irq 225, io base 0x00001840
[4294677.020000] hub 2-0:1.0: USB hub found
[4294677.020000] hub 2-0:1.0: 2 ports detected
[4294677.121000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294677.121000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294677.121000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294677.121000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294677.121000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001860
[4294677.121000] hub 3-0:1.0: USB hub found
[4294677.121000] hub 3-0:1.0: 2 ports detected
[4294677.222000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177
[4294677.222000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294677.222000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294677.222000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294677.222000] uhci_hcd 0000:00:1d.3: irq 177, io base 0x00001880
[4294677.222000] hub 4-0:1.0: USB hub found
[4294677.222000] hub 4-0:1.0: 2 ports detected
[4294677.324000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
[4294677.324000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294677.324000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294677.325000] ehci_hcd 0000:00:1d.7: debug port 1
[4294677.325000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294677.325000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294677.325000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xdc444000
[4294677.329000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294677.329000] hub 5-0:1.0: USB hub found
[4294677.329000] hub 5-0:1.0: 8 ports detected
[4294677.449000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294677.449000] ide0: ports already in use, skipping probe
[4294677.449000] ide1: I/O resource 0x170-0x177 not free.
[4294677.449000] ide1: ports already in use, skipping probe
[4294677.476000] Attempting manual resume
[4294677.484000] EXT3-fs: INFO: recovery required on readonly filesystem.
[4294677.484000] EXT3-fs: write access will be enabled during recovery.
[4294684.788000] EXT3-fs: recovery complete.
[4294684.788000] kjournald starting. Commit interval 5 seconds
[4294684.795000] EXT3-fs: mounted filesystem with ordered data mode.
[4294694.278000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294694.278000] 1:0:0:0: Attached scsi generic sg1 type 5
[4294694.358000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[4294694.358000] Uniform CD-ROM driver Revision: 3.20
[4294694.358000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294695.185000] Linux agpgart interface v0.101 (c) Dave Jones
[4294695.192000] agpgart: Detected an Intel 945GM Chipset.
[4294695.193000] agpgart: Detected 7932K stolen memory.
[4294695.223000] agpgart: AGP aperture is 256M @ 0xc0000000
[4294695.268000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294695.333000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294695.399000] hw_random hardware driver 1.0.0 loaded
[4294695.532000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 50
[4294695.532000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294695.618000] hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
[4294695.663000] sdhci: Secure Digital Host Controller Interface driver, 0.10
[4294695.663000] sdhci: Copyright(c) Pierre Ossman
[4294695.740000] e100: Intel(R) PRO/100 Network Driver, 3.4.14-k4-NAPI
[4294695.740000] e100: Copyright(c) 1999-2005 Intel Corporation
[4294695.758000] Real Time Clock Driver v1.12
[4294695.809000] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 185
[4294695.809000] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
[4294695.932000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
[4294695.932000] Socket status: 30000006
[4294695.932000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[4294695.932000] cs: IO port probe 0x4000-0x4fff: clean.
[4294695.933000] pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
[4294695.933000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff
[4294695.933000] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 185
[4294695.941000] ieee1394: Initialized config rom entry `ip1394'
[4294695.945000] ohci1394: $Rev: 1313 $ Ben Collins <email address hidden>
[4294695.945000] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 169
[4294695.983000] sdhci: ============== REGISTER DUMP ==============
[4294695.983000] sdhci: Sys addr: 0x00000000 | Version: 0x00008900
[4294695.983000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[4294695.983000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294695.983000] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000
[4294695.983000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[4294695.983000] sdhci: Walk up: 0x00000000 | Clock: 0x00000000
[4294695.983000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[4294695.983000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294695.983000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294695.983000] sdhci: Caps: 0x01e030b0 | Max curr: 0x00000000
[4294695.983000] sdhci: ===========================================
[4294695.997000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[169] MMIO=[dc006000-dc0067ff] Max Packet=[2048]
[4294696.033000] mmc0: SDHCI at 0xdc006800 irq 185 DMA
[4294696.033000] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 58
[4294696.073000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2a0b1, caps: 0xb04713/0x60040d
[4294696.073000] synaptics: Toshiba Satellite A105 detected, limiting rate to 40pps.
[4294696.091000] e100: eth0: e100_probe: addr 0xdc005000, irq 58, MAC addr 00:A0:D1:36:6C:6E
[4294696.115000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[4294696.137000] ts: Compaq touchscreen protocol output
[4294696.276000] e100: eth0: e100_watchdog: link up, 10Mbps, half-duplex
[4294696.418000] cs: IO port probe 0x100-0x4ff: excluding 0x370-0x377 0x3f0-0x3f7 0x400-0x407 0x4d0-0x4d7
[4294696.421000] cs: IO port probe 0xc00-0xcf7: clean.
[4294696.422000] cs: IO port probe 0xa00-0xaff: clean.
[4294696.590000] lp: driver loaded but no devices found
[4294696.640000] sbp2: $Rev: 1306 $ Ben Collins <email address hidden>
[4294696.640000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294696.640000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294696.676000] Adding 2016116k swap on /dev/sda5. Priority:-1 extents:1 across:2016116k
[4294696.731000] EXT3 FS on sda2, internal journal
[4294696.878000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294696.878000] md: bitmap version 4.39
[4294697.254000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d1366c6e]
[4294697.490000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
[4294697.513000] NET: Registered protocol family 17
[4294697.984000] cdrom: open failed.
[4294699.151000] NET: Registered protocol family 10
[4294699.151000] lo: Disabled Privacy Extensions
[4294699.151000] IPv6 over IPv4 tunneling driver
[4294699.580000] ACPI: AC Adapter [ADP0] (on-line)
[4294699.585000] ACPI: Battery Slot [BAT0] (battery present)
[4294699.654000] ACPI: Power Button (FF) [PWRF]
[4294699.654000] ACPI: Lid Switch [LID]
[4294699.654000] ACPI: Power Button (CM) [PWRB]
[4294699.805000] ibm_acpi: ec object not found
[4294699.827000] pcc_acpi: loading...
[4294699.916000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[4294699.916000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[4294705.316000] [drm] Initialized drm 1.0.0 20040925
[4294705.320000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177
[4294705.320000] [drm] Initialized i915 1.1.0 20040405 on minor 0:
[4294705.321000] mtrr: base(0xc0020000) is not aligned on a size(0x300000) boundary
[4294706.707000] apm: BIOS not found.
[4294707.163000] Bluetooth: Core ver 2.8
[4294707.163000] NET: Registered protocol family 31
[4294707.163000] Bluetooth: HCI device and connection manager initialized
[4294707.163000] Bluetooth: HCI socket layer initialized
[4294707.186000] Bluetooth: L2CAP ver 2.8
[4294707.186000] Bluetooth: L2CAP socket layer initialized
[4294707.189000] Bluetooth: RFCOMM socket layer initialized
[4294707.189000] Bluetooth: RFCOMM TTY layer initialized
[4294707.189000] Bluetooth: RFCOMM ver 1.7
[4294709.766000] eth0: no IPv6 routers present

lspci -vv:

0000:00:00.0 Host bridge: Intel Corporation Mobile Memory Controller Hub (rev 03)
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
 Latency: 0
 Capabilities: [e0] #09 [5109]

0000:00:02.0 VGA compatible controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 177
 Region 0: Memory at dc100000 (32-bit, non-prefetchable) [size=512K]
 Region 1: I/O ports at 1800 [size=8]
 Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
 Region 3: Memory at dc200000 (32-bit, non-prefetchable) [size=256K]
 Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
  Address: 00000000 Data: 0000
 Capabilities: [d0] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:02.1 Display controller: Intel Corporation Mobile Integrated Graphics Controller (rev 03)
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Region 0: Memory at dc180000 (32-bit, non-prefetchable) [size=512K]
 Capabilities: [d0] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1b.0 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 0x10 (64 bytes)
 Interrupt: pin A routed to IRQ 50
 Region 0: Memory at dc240000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [70] #10 [0091]

0000:00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 0x10 (64 bytes)
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [40] #10 [0141]
 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
  Address: fee00000 Data: 40c9
 Capabilities: [90] #0d [0000]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 0x10 (64 bytes)
 Bus: primary=00, secondary=03, subordinate=04, sec-latency=0
 I/O behind bridge: 00002000-00002fff
 Memory behind bridge: d8000000-d9ffffff
 Prefetchable memory behind bridge: 00000000d2000000-00000000d3f00000
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [40] #10 [0141]
 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
  Address: fee00000 Data: 40d1
 Capabilities: [90] #0d [0000]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 0x10 (64 bytes)
 Bus: primary=00, secondary=05, subordinate=06, sec-latency=0
 I/O behind bridge: 00003000-00003fff
 Memory behind bridge: da000000-dbffffff
 Prefetchable memory behind bridge: 00000000d4000000-00000000d5f00000
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [40] #10 [0141]
 Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
  Address: fee00000 Data: 40d9
 Capabilities: [90] #0d [0000]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 233
 Region 4: I/O ports at 1820 [size=32]

0000:00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin B routed to IRQ 225
 Region 4: I/O ports at 1840 [size=32]

0000:00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin C routed to IRQ 185
 Region 4: I/O ports at 1860 [size=32]

0000:00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin D routed to IRQ 177
 Region 4: I/O ports at 1880 [size=32]

0000:00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 233
 Region 0: Memory at dc444000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
 I/O behind bridge: 00004000-00004fff
 Memory behind bridge: dc000000-dc0fffff
 Prefetchable memory behind bridge: 0000000050000000-0000000051f00000
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [50] #0d [0000]

0000:00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Capabilities: [e0] #09 [100c]

0000:00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 02) (prog-if 80 [Master])
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin B routed to IRQ 225
 Region 0: I/O ports at <unassigned>
 Region 1: I/O ports at <unassigned>
 Region 2: I/O ports at <unassigned>
 Region 3: I/O ports at <unassigned>
 Region 4: I/O ports at 18b0 [size=16]
 Capabilities: [70] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Interrupt: pin B routed to IRQ 10
 Region 4: I/O ports at 18c0 [size=32]

0000:05:00.0 Network controller: Intel Corporation: Unknown device 4222 (rev 02)
 Subsystem: Intel Corporation: Unknown device 1040
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 0x10 (64 bytes)
 Interrupt: pin A routed to IRQ 10
 Region 0: Memory at da000000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [c8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [e0] #10 [0011]

0000:07:06.0 CardBus bridge: Texas Instruments: Unknown device 8039
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 168, Cache Line Size: 0x08 (32 bytes)
 Interrupt: pin A routed to IRQ 185
 Region 0: Memory at dc007000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176
 Memory window 0: 50000000-51fff000 (prefetchable)
 Memory window 1: 52000000-53fff000
 I/O window 0: 00004400-000044ff
 I/O window 1: 00004800-000048ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001

0000:07:06.1 FireWire (IEEE 1394): Texas Instruments: Unknown device 803a (prog-if 10 [OHCI])
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 128 (500ns min, 1000ns max), Cache Line Size: 0x04 (16 bytes)
 Interrupt: pin B routed to IRQ 169
 Region 0: Memory at dc006000 (32-bit, non-prefetchable) [size=2K]
 Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME+

0000:07:06.2 Mass storage controller: Texas Instruments: Unknown device 803b
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 0x04 (16 bytes)
 Interrupt: pin A routed to IRQ 10
 Region 0: Memory at dc004000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [44] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:07:06.3 0805: Texas Instruments: Unknown device 803c (prog-if 01)
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 128 (1750ns min, 1000ns max), Cache Line Size: 0x04 (16 bytes)
 Interrupt: pin A routed to IRQ 185
 Region 0: Memory at dc006800 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:07:08.0 Ethernet controller: Intel Corporation: Unknown device 1092 (rev 02)
 Subsystem: Toshiba America Info Systems: Unknown device ff10
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 0x10 (64 bytes)
 Interrupt: pin A routed to IRQ 58
 Region 0: Memory at dc005000 (32-bit, non-prefetchable) [size=4K]
 Region 1: I/O ports at 4000 [size=64]
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-

[Dennis Kaarsemaker (dennis)]

System -> Preferences -> Removabe media

What is the command for video DVD discs?

[Joseph Smidt (jsmidt)]

On 4/22/06, Dennis Kaarsemaker <email address hidden> wrote:
>
> System -> Preferences -> Removabe media
>
> What is the command for video DVD discs?
>
> --
> Bad Totem/DVD Support for Toshiba A105-S4004
> https://launchpad.net/bugs/40456

According to removable media, the command for video dvd discs is:
totem %m

--
-------------------------------------------------------------
       Joseph Smidt
     <email address hidden>

[Sebastien Bacher (seb128)]

Thanks for the bug report. This particular bug has already been reported into our bug tracking system, but please feel free to report any further bugs you find.