linux-image-2.6.27-7-generic 2.6.27-7.14 failed to install/upgrade
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Confirmed
|
Undecided
|
wm3 |
Bug Description
package linux-image-
//*
[ 2.990456] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 2.990827] scsi0 : sata_via
[ 2.991632] scsi1 : sata_via
[ 2.991741] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xb400 bmdma 0xc000 irq 20
[ 2.991748] ata2: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc008 irq 20
[ 3.192572] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 3.396669] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 3.397087] uhci_hcd 0000:00:10.0: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 3.397134] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.397393] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 3.397484] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000cc00
[ 3.398492] usb usb2: configuration #1 chosen from 1 choice
[ 3.398584] hub 2-0:1.0: USB hub found
[ 3.398620] hub 2-0:1.0: 2 ports detected
[ 3.609555] uhci_hcd 0000:00:10.1: PCI INT A -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 3.609600] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.609691] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 3.609775] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d000
[ 3.610297] usb usb3: configuration #1 chosen from 1 choice
[ 3.610369] hub 3-0:1.0: USB hub found
[ 3.610400] hub 3-0:1.0: 2 ports detected
[ 3.816782] uhci_hcd 0000:00:10.2: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 3.816809] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 3.816859] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 3.816901] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d400
[ 3.817070] usb usb4: configuration #1 chosen from 1 choice
[ 3.817122] hub 4-0:1.0: USB hub found
[ 3.817142] hub 4-0:1.0: 2 ports detected
[ 4.024584] uhci_hcd 0000:00:10.3: PCI INT B -> Link[ALKB] -> GSI 21 (level, low) -> IRQ 21
[ 4.024606] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 4.024653] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 4.024694] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d800
[ 4.024868] usb usb5: configuration #1 chosen from 1 choice
[ 4.024910] hub 5-0:1.0: USB hub found
[ 4.024931] hub 5-0:1.0: 2 ports detected
[ 4.236560] 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 4.236573] 8139cp 0000:00:13.0: Try the "8139too" driver instead.
[ 4.240912] pata_via 0000:00:0f.1: version 0.3.3
[ 4.241001] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 4.256389] scsi2 : pata_via
[ 4.256917] 8139too Fast Ethernet driver 0.9.28
[ 4.289836] scsi3 : pata_via
[ 4.290043] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xc800 irq 14
[ 4.290051] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xc808 irq 15
[ 5.328393] ata3.00: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 5.328408] ata3.00: ATA-7: MAXTOR STM3802110A, 3.AAK, max UDMA/100
[ 5.328412] ata3.00: 156301488 sectors, multi 16: LBA48
[ 5.382964] ata3.00: configured for UDMA/100
[ 5.544515] ata4.01: ATAPI: SAMSUNG CD-R/RW DRIVE SW-208B, V:00BS04, max MWDMA2
[ 5.560330] ata4.01: configured for MWDMA2
[ 5.560624] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM380211 3.AA PQ: 0 ANSI: 5
[ 5.561216] scsi 2:0:0:0: Attached scsi generic sg0 type 0
[ 5.561653] scsi 3:0:1:0: CD-ROM SAMSUNG CD-R/RW SW-208B BS04 PQ: 0 ANSI: 5
[ 5.562011] scsi 3:0:1:0: Attached scsi generic sg1 type 5
[ 5.562288] 8139too 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.563376] eth0: RealTek RTL8139 at 0xe000, 00:14:85:5d:61:1c, IRQ 18
[ 5.563383] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 5.601833] Driver 'sd' needs updating - please use bus_type methods
[ 5.602411] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.602455] sd 2:0:0:0: [sda] Write Protect is off
[ 5.602461] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.602544] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.603013] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 5.603065] sd 2:0:0:0: [sda] Write Protect is off
[ 5.603070] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.603119] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.603129] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 6.295863] sda1 sda2 < sda5 sda6 sda7 >
[ 6.338579] sd 2:0:0:0: [sda] Attached SCSI disk
[ 6.345481] sr0: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray
[ 6.345498] Uniform CD-ROM driver Revision: 3.20
[ 6.345840] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 10.476764] loop: module loaded
[ 11.233577] kjournald starting. Commit interval 5 seconds
[ 11.233611] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.436686] udevd version 124 started
[ 23.329912] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 23.522422] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.003458] Linux agpgart interface v0.103
[ 25.201049] input: Power Button (FF) as /devices/
[ 25.269502] ACPI: Power Button (FF) [PWRF]
[ 25.269712] input: Power Button (CM) as /devices/
[ 25.309352] input: PC Speaker as /devices/
[ 25.334173] ACPI: Power Button (CM) [PWRB]
[ 25.334794] agpgart: Detected VIA VT3314 chipset
[ 25.371814] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 25.704318] parport_pc 00:0a: reported by Plug and Play ACPI
[ 25.704385] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 27.958053] input: ImPS/2 Generic Wheel Mouse as /devices/
[ 30.687880] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 30.687895] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 30.687936] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[ALKC] -> GSI 22 (level, low) -> IRQ 22
[ 30.688230] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 32.162361] lp0: using parport0 (interrupt-driven).
[ 32.931027] EXT3 FS on loop0, internal journal
[ 34.699422] kjournald starting. Commit interval 5 seconds
[ 34.699476] EXT3 FS on loop1, internal journal
[ 34.699488] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.700406] kjournald starting. Commit interval 5 seconds
[ 34.700458] EXT3 FS on loop2, internal journal
[ 34.700465] EXT3-fs: mounted filesystem with ordered data mode.
[ 36.541922] Adding 976552k swap on /host/ubuntu/
[ 36.913307] type=1505 audit(124706254
[ 37.152312] type=1505 audit(124706254
[ 37.153301] type=1505 audit(124706254
[ 40.407202] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 41.345811] ACPI: WMI: Mapper loaded
[ 44.449145] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 44.519168] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 44.519178] apm: disabled - APM is not SMP safe.
[ 44.737881] ppdev: user-space parallel port driver
[ 48.014364] Bluetooth: Core ver 2.13
[ 48.016191] NET: Registered protocol family 31
[ 48.016213] Bluetooth: HCI device and connection manager initialized
[ 48.016223] Bluetooth: HCI socket layer initialized
[ 48.040567] Bluetooth: L2CAP ver 2.11
[ 48.040578] Bluetooth: L2CAP socket layer initialized
[ 48.058637] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 48.058648] Bluetooth: BNEP filters: protocol multicast
[ 48.106740] Bridge firewalling registered
[ 48.157667] Bluetooth: SCO (Voice Link) ver 0.6
[ 48.157678] Bluetooth: SCO socket layer initialized
[ 48.186641] Bluetooth: RFCOMM socket layer initialized
[ 48.186719] Bluetooth: RFCOMM TTY layer initialized
[ 48.186724] Bluetooth: RFCOMM ver 1.10
[ 52.381109] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 52.399686] [drm] Initialized drm 1.1.0 20060810
[ 52.432924] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 52.432947] pci 0000:01:00.0: setting latency timer to 64
[ 52.433489] [drm] Initialized sis 1.3.0 20070626 on minor 0
[ 52.435151] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 52.435191] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 52.435206] agpgart-via 0000:00:00.0: putting AGP V2 device into 0x mode
[ 52.435330] pci 0000:01:00.0: putting AGP V2 device into 0x mode
[ 52.732828] NET: Registered protocol family 17
[ 58.302883] NET: Registered protocol family 10
[ 58.307377] lo: Disabled Privacy Extensions
[ 68.384026] eth0: no IPv6 routers present
[ 333.505805] ppdev0: registered pardevice
[ 333.552090] ppdev0: unregistered pardevice
[ 335.603927] type=1503 audit(124706283
[ 337.215927] type=1503 audit(124706283
[ 337.216150] type=1503 audit(124706283
[ 337.216166] type=1503 audit(124706283
[ 337.216180] type=1503 audit(124706283
[ 337.216213] type=1503 audit(124706283
[ 337.216230] type=1503 audit(124706283
[ 337.216246] type=1503 audit(124706283
[ 337.216262] type=1503 audit(124706283
[ 337.216278] type=1503 audit(124706283
[ 357.372871] ppdev0: registered pardevice
[ 357.420397] ppdev0: unregistered pardevice
[ 358.741784] ppdev0: registered pardevice
[ 358.989380] ppdev0: unregistered pardevice
[ 8339.113001] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8339.113022] ata3.00: BMDMA stat 0x25
[ 8339.113038] ata3.00: cmd 25/00:80:
[ 8339.113042] res 51/40:00:
[ 8339.113050] ata3.00: status: { DRDY ERR }
[ 8339.113053] ata3.00: error: { UNC }
[ 8340.036972] ata3.00: configured for UDMA/100
[ 8340.037019] ata3: EH complete
[ 8341.699343] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 8341.699354] ata3.00: BMDMA stat 0x25
[ 8341.699363] ata3.00: cmd 25/00:80:
[ 8341.699365] res 51/40:00:
[ 8341.699369] ata3.00: status: { DRDY ERR }
[ 8341.699372] ata3.00: error: { UNC }
[ 8341.833276] ata3.00: configured for UDMA/100
[ 8341.833326] ata3: EH complete
[ 8343.145008] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 8343.155748] sd 2:0:0:0: [sda] Write Protect is off
[ 8343.155755] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8343.164387] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8343.176522] sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 8343.176559] sd 2:0:0:0: [sda] Write Protect is off
[ 8343.176563] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8343.176606] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
n0a@ubuntu:~$ sudo lspci -vnvn
[sudo] password for n0a:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Subsystem: Device [1940:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Status: RQ=8 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=<none>
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: via-agp
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: shpchp
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Device [1940:b003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at bc00 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: I/O ports at c400 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: sata_via
Kernel modules: sata_via
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/
Subsystem: Device [1940:5002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at c800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_via
Kernel modules: pata_via
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at cc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20)
Subsystem: Device [1940:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 21
Region 0: Memory at e2000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/
Subsystem: Device [1940:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: i2c-viapro
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: Device [1940:a002]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at dc00 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:13.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/
Subsystem: Device [1940:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at e2001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: 8139too
Kernel modules: 8139cp, 8139too
01:00.0 VGA compatible controller [0300]: Silicon Integrated Systems [SiS] 300/305 PCI/AGP VGA Display Adapter [1039:0300] (rev 90)
Subsystem: Silicon Integrated Systems [SiS] 300/305 PCI/AGP VGA Display Adapter [1039:0300]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
BIST result: 02
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e1000000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at a000 [size=128]
[virtual] Expansion ROM at e0000000 [disabled] [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] AGP version 1.0
Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=8 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=<none>
Kernel modules: sisfb
n0a@ubuntu:~$
ProblemType: Package
Architecture: i386
DistroRelease: Ubuntu 8.10
ErrorMessage: unable to make backup link of `./boot/
LsUsb:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Package: linux-image-
ProcCmdLine: User Name=UUID=B499-51B3 loop=/hostname/
ProcVersionSign
SourcePackage: linux
Title: package linux-image-
Is this a Wubi installation? The reason I ask is it seems to be a duplicate of bug 252900. Please let us know. Thanks.