i810 for 915GM doesn't work, screen blank

[TentacleGuy]

Hi,

I've got a problem using the i810-module for an i915 Intel Express Card.

The screen is just blank, the notebook (Fuj-Siem. Amilo M6450G) only reacts on ACPI-events. (CTRL-ALT-Backspace doesn't even work).

If I try to use the vesa-driver, it doesn't switch to 1280x800 resolution, only to 1024x768 (915resolution seems to write the vbios, but it doesn't influence the xorg-resolution).

(I first had this problem on BB, now I upgraded to DD)

Philipp

--edit:
SSH seems to work, the last Output ist a startx via SSH.

Outputs:
lspci :

root@runaway:/space/crypted/home/kerstin# lspci -v
0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] #09 [2109]

0000:00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) (prog-if 00 [VGA])
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, fast devsel, latency 0, IRQ 10
        Memory at ffe80000 (32-bit, non-prefetchable) [size=512K]
        I/O ports at ec00 [size=8]
        Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Memory at ffe40000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: [d0] Power Management version 2

0000:00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: fast devsel
        Memory at 40000000 (32-bit, non-prefetchable) [disabled] [size=512K]
        Capabilities: [d0] Power Management version 2

0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, fast devsel, latency 0, IRQ 169
        Memory at ffe38000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
        Capabilities: [70] #10 [0091]

0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: bfc00000-bfcfffff
        Prefetchable memory behind bridge: 00000000bfd00000-00000000bfd00000
        Capabilities: [40] #10 [0141]
        Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
        Capabilities: [90] #0d [0000]
        Capabilities: [a0] Power Management version 2

0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, medium devsel, latency 0, IRQ 201
        I/O ports at e400 [size=32]

0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, medium devsel, latency 0, IRQ 193
        I/O ports at e480 [size=32]

0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, medium devsel, latency 0, IRQ 209
        I/O ports at e800 [size=32]

0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) (prog-if 00 [UHCI])
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, medium devsel, latency 0, IRQ 169
        I/O ports at e880 [size=32]

0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI])
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, medium devsel, latency 0, IRQ 201
        Memory at ffe3fc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: ffc00000-ffcfffff
        Capabilities: [50] #0d [0000]

0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, medium devsel, latency 0

0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) (prog-if 80 [Master])
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 193
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at ffa0 [size=16]
        Capabilities: [70] Power Management version 2

0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: medium devsel, IRQ 10
        I/O ports at 0400 [size=32]

0000:01:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG (rev 05)
        Subsystem: Intel Corporation: Unknown device 2702
        Flags: bus master, medium devsel, latency 64, IRQ 217
        Memory at ffcfe000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 2

0000:01:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, medium devsel, latency 64, IRQ 209
        Memory at ffcff000 (32-bit, non-prefetchable) [size=2K]
        Memory at ffcf8000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2

0000:01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 10a7
        Flags: bus master, medium devsel, latency 64, IRQ 193
        I/O ports at 1000 [size=256]
        Memory at ffcffc00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [50] Power Management version 2

root@runaway:/space/crypted/home/kerstin# cat /etc/X11/xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
        FontPath "/usr/share/X11/fonts/misc"
        FontPath "/usr/share/X11/fonts/cyrillic"
        FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
        FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
        FontPath "/usr/share/X11/fonts/Type1"
        FontPath "/usr/share/X11/fonts/100dpi"
        FontPath "/usr/share/X11/fonts/75dpi"
        # path to defoma fonts
        FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load "bitmap"
        Load "ddc"
        Load "dri"
        Load "extmod"
        Load "freetype"
        Load "glx"
        Load "int10"
        Load "type1"
        Load "vbe"
EndSection

Section "InputDevice"
        Identifier "Generic Keyboard"
        Driver "kbd"
        Option "CoreKeyboard"
        Option "XkbRules" "xorg"
        Option "XkbModel" "pc105"
        Option "XkbLayout" "de"
        Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
        Identifier "Configured Mouse"
        Driver "mouse"
        Option "CorePointer"
        Option "Device" "/dev/input/mice"
        Option "Protocol" "ExplorerPS/2"
        Option "ZAxisMapping" "4 5"
        Option "Emulate3Buttons" "true"
EndSection

Section "Device"
        Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
# Driver "i810"
        Driver "vesa"
        BusID "PCI:0:2:0"
EndSection

Section "Monitor"
        Identifier "Generic Monitor"
# Option "DPMS"
        HorizSync 28-64
        VertRefresh 43-60
        Option "IgnoreEDID" "1" # Setzt die automatische Erkennung der Frequenzen ausser Kraft
# Modeline "1280x800" 83.91 1280 1312 1624 1656 800 816 824 841
EndSection

Section "Screen"
        Identifier "Default Screen"
        Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
        Monitor "Generic Monitor"
        DefaultDepth 16
        SubSection "Display"
                Depth 16
                Modes "1280x768" "1280x800" "1024x768"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier "Default Layout"
        Screen "Default Screen"
        InputDevice "Generic Keyboard"
        InputDevice "Configured Mouse"
EndSection

Section "DRI"
        Mode 0666
EndSection

root@runaway:/space/crypted/home/kerstin# uname -a
Linux runaway 2.6.15-19-686 #1 SMP PREEMPT Mon Mar 20 17:33:20 UTC 2006 i686 GNU/Linux

root@runaway:/space/crypted/home/kerstin# dmesg
[4294667.296000] Linux version 2.6.15-19-686 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Mon Mar 20 17:33:20 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003efd0000 (usable)
[4294667.296000] BIOS-e820: 000000003efd0000 - 000000003efde000 (ACPI data)
[4294667.296000] BIOS-e820: 000000003efde000 - 000000003f000000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[4294667.296000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[4294667.296000] 111MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000ff780
[4294667.296000] On node 0 totalpages: 258000
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 28624 pages, LIFO batch:7
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f8bd0
[4294667.296000] ACPI: RSDT (v001 A M I OEMRSDT 0x11000523 MSFT 0x00000097) @ 0x3efd0000
[4294667.296000] ACPI: FADT (v002 A M I OEMFACP 0x11000523 MSFT 0x00000097) @ 0x3efd0200
[4294667.296000] ACPI: MADT (v001 A M I OEMAPIC 0x11000523 MSFT 0x00000097) @ 0x3efd0390
[4294667.296000] ACPI: MCFG (v001 A M I OEMMCFG 0x11000523 MSFT 0x00000097) @ 0x3efd03f0
[4294667.296000] ACPI: OEMB (v001 A M I AMI_OEM 0x11000523 MSFT 0x00000097) @ 0x3efde040
[4294667.296000] ACPI: MCFG (v001 A M I OEMMCFG 0x11000523 MSFT 0x00000097) @ 0x3efd4400
[4294667.296000] ACPI: SSDT (v001 AMI0 CPU1PM 0x00000001 INTL 0x02002026) @ 0x3efd4440
[4294667.296000] ACPI: DSDT (v001 UW____ F27_____ 0x00000000 INTL 0x02002026) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:13 APIC version 20
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 3f000000:a1000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda5 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 1700.420 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294671.197000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294671.197000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294671.228000] Memory: 1011124k/1032000k available (2089k kernel code, 20208k reserved, 589k data, 328k init, 114496k highmem)
[4294671.228000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294671.289000] Calibrating delay using timer specific routine.. 3402.65 BogoMIPS (lpj=1701329)
[4294671.289000] Security Framework v1.0.0 initialized
[4294671.289000] SELinux: Disabled at boot.
[4294671.289000] Mount-cache hash table entries: 512
[4294671.289000] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[4294671.289000] CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[4294671.289000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294671.289000] CPU: L2 cache: 2048K
[4294671.289000] CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
[4294671.289000] mtrr: v2.0 (20020519)
[4294671.289000] Enabling fast FPU save and restore... done.
[4294671.289000] Enabling unmasked SIMD FPU exception support... done.
[4294671.289000] Checking 'hlt' instruction... OK.
[4294671.293000] SMP alternatives: switching to UP code
[4294671.293000] checking if image is initramfs... it is
[4294671.860000] Freeing initrd memory: 6570k freed
[4294671.867000] ACPI: Looking for DSDT ... not found!
[4294671.882000] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 08
[4294671.882000] Total of 1 processors activated (3402.65 BogoMIPS).
[4294671.882000] ENABLING IO-APIC IRQs
[4294671.882000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294671.993000] Brought up 1 CPUs
[4294671.993000] NET: Registered protocol family 16
[4294671.993000] EISA bus registered
[4294671.993000] ACPI: bus type pci registered
[4294671.993000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[4294671.993000] ACPI: 2 duplicate MCFG table ignored.
[4294671.993000] PCI: Using MMCONFIG
[4294671.994000] ACPI: Subsystem revision 20051216
[4294671.997000] ACPI: Interpreter enabled
[4294671.997000] ACPI: Using IOAPIC for interrupt routing
[4294671.998000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.998000] PCI: Probing PCI hardware (bus 00)
[4294671.999000] Boot video device is 0000:00:02.0
[4294671.999000] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[4294671.999000] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[4294671.999000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294672.000000] PCI: Transparent bridge - 0000:00:1e.0
[4294672.000000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294672.014000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[4294672.015000] ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
[4294672.024000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[4294672.024000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294672.025000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294672.025000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294672.025000] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[4294672.025000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294672.026000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[4294672.026000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294672.026000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294672.026000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294672.026000] pnp: PnP ACPI init
[4294672.026000] pnp: PnPACPI: unknown resource type 7
[4294672.026000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294672.026000] pnp: PnPACPI: unknown resource type 7
[4294672.026000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294672.026000] pnp: PnPACPI: unknown resource type 7
[4294672.026000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294672.026000] pnp: PnPACPI: unknown resource type 7
[4294672.026000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294672.027000] pnp: PnPACPI: unknown resource type 7
[4294672.027000] pnp: PnPACPI: METHOD_NAME__CRS failure for SYN0804
[4294672.027000] pnp: PnPACPI: unknown resource type 7
[4294672.027000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294672.027000] pnp: PnPACPI: unknown resource type 7
[4294672.027000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294672.027000] pnp: PnPACPI: unknown resource type 7
[4294672.027000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294672.027000] pnp: PnPACPI: unknown resource type 7
[4294672.027000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294672.027000] pnp: PnPACPI: unknown resource type 7
[4294672.027000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294672.027000] pnp: PnPACPI: unknown resource type 7
[4294672.027000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294672.028000] pnp: PnP ACPI: found 0 devices
[4294672.028000] PnPBIOS: Disabled by ACPI PNP
[4294672.028000] PCI: Using ACPI for IRQ routing
[4294672.028000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294672.028000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1e.0
[4294672.028000] PCI: Cannot allocate resource region 0 of device 0000:01:0c.0
[4294672.033000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294672.033000] PCI: Bridge: 0000:00:1c.0
[4294672.033000] IO window: d000-dfff
[4294672.033000] MEM window: bfc00000-bfcfffff
[4294672.033000] PREFETCH window: bfd00000-bfdfffff
[4294672.033000] PCI: Bridge: 0000:00:1e.0
[4294672.033000] IO window: 1000-1fff
[4294672.033000] MEM window: ffc00000-ffcfffff
[4294672.033000] PREFETCH window: disabled.
[4294672.033000] PCI: Enabling device 0000:00:1c.0 (0106 -> 0107)
[4294672.033000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294672.033000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294672.033000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294672.034000] audit: initializing netlink socket (disabled)
[4294672.034000] audit(1144096685.032:1): initialized
[4294672.034000] highmem bounce pool size: 64 pages
[4294672.034000] VFS: Disk quotas dquot_6.5.1
[4294672.034000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.034000] Initializing Cryptographic API
[4294672.034000] io scheduler noop registered
[4294672.034000] io scheduler anticipatory registered
[4294672.034000] io scheduler deadline registered
[4294672.034000] io scheduler cfq registered
[4294672.034000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294672.034000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294672.034000] assign_interrupt_mode Found MSI capability
[4294672.034000] Allocate Port Service[pcie00]
[4294672.034000] Allocate Port Service[pcie02]
[4294672.034000] Allocate Port Service[pcie03]
[4294672.035000] isapnp: Scanning for PnP cards...
[4294672.393000] isapnp: No Plug & Play device found
[4294672.407000] PNP: No PS/2 controller found. Probing ports directly.
[4294672.411000] i8042.c: Detected active multiplexing controller, rev 1.0.
[4294672.412000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294672.412000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294672.412000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294672.412000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294672.412000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.412000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294672.415000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.415000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.415000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294672.415000] ACPI: bus type ide registered
[4294672.415000] mice: PS/2 mouse device common for all mice
[4294672.416000] EISA: Probing bus 0 at eisa.0
[4294672.416000] Cannot allocate resource for EISA slot 1
[4294672.416000] EISA: Detected 0 cards.
[4294672.416000] NET: Registered protocol family 2
[4294672.422000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294672.427000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294672.427000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[4294672.429000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[4294672.430000] TCP: Hash tables configured (established 131072 bind 65536)
[4294672.430000] TCP reno registered
[4294672.430000] TCP bic registered
[4294672.430000] NET: Registered protocol family 1
[4294672.430000] NET: Registered protocol family 8
[4294672.430000] NET: Registered protocol family 20
[4294672.430000] Using IPI No-Shortcut mode
[4294672.430000] ACPI wakeup devices:
[4294672.430000] P0P2 P0P1 LAN MC97 AZC P0P5 P0P6 P0P7 P0P4
[4294672.430000] ACPI: (supports S0 S3 S4 S5)
[4294672.431000] Freeing unused kernel memory: 328k freed
[4294672.494000] vga16fb: initializing
[4294672.494000] vga16fb: mapped to 0xc00a0000
[4294672.621000] Console: switching to colour frame buffer device 80x25
[4294672.621000] fb0: VGA16 VGA frame buffer device
[4294673.771000] Capability LSM initialized
[4294673.798000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294673.798000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294673.808000] ACPI: Thermal Zone [THRM] (63 C)
[4294674.230000] SCSI subsystem initialized
[4294674.231000] libata version 1.20 loaded.
[4294674.232000] ahci 0000:00:1f.2: version 1.2
[4294674.232000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
[4294674.232000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[4294674.232000] ahci: probe of 0000:00:1f.2 failed with error -12
[4294674.235000] ata_piix 0000:00:1f.2: version 1.05
[4294674.235000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
[4294674.235000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294674.235000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xFFA0 irq 14
[4294674.391000] ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:be09 87:6063 88:203f
[4294674.391000] ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
[4294674.393000] ata1: dev 0 configured for UDMA/100
[4294674.393000] scsi0 : ata_piix
[4294674.393000] Vendor: ATA Model: FUJITSU MHV2080B Rev: 0000
[4294674.393000] Type: Direct-Access ANSI SCSI revision: 05
[4294674.393000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xFFA8 irq 15
[4294674.701000] ata2: dev 0 cfg 49:0f00 82:421c 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407
[4294674.701000] ata2: dev 0 ATAPI, max UDMA/33
[4294674.701000] ata2(0): applying bridge limits
[4294674.702000] ata2: dev 0 configured for UDMA/33
[4294674.702000] scsi1 : ata_piix
[4294674.705000] Vendor: HL-DT-ST Model: DVD-RW GWA-4082N Rev: CW02
[4294674.705000] Type: CD-ROM ANSI SCSI revision: 05
[4294674.712000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294674.713000] SCSI device sda: drive cache: write back
[4294674.715000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[4294674.716000] SCSI device sda: drive cache: write back
[4294674.716000] sda: sda1 sda2 sda3 < sda5 > sda4
[4294674.811000] sd 0:0:0:0: Attached scsi disk sda
[4294675.150000] usbcore: registered new driver usbfs
[4294675.150000] usbcore: registered new driver hub
[4294675.151000] USB Universal Host Controller Interface driver v2.3
[4294675.152000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 201
[4294675.152000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294675.152000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294675.153000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294675.153000] uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000e400
[4294675.154000] hub 1-0:1.0: USB hub found
[4294675.154000] hub 1-0:1.0: 2 ports detected
[4294675.256000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
[4294675.256000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294675.256000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294675.256000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294675.256000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000e480
[4294675.256000] hub 2-0:1.0: USB hub found
[4294675.256000] hub 2-0:1.0: 2 ports detected
[4294675.358000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 209
[4294675.358000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294675.358000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294675.358000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294675.358000] uhci_hcd 0000:00:1d.2: irq 209, io base 0x0000e800
[4294675.358000] hub 3-0:1.0: USB hub found
[4294675.358000] hub 3-0:1.0: 2 ports detected
[4294675.460000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[4294675.460000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294675.460000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294675.460000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294675.460000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000e880
[4294675.460000] hub 4-0:1.0: USB hub found
[4294675.460000] hub 4-0:1.0: 2 ports detected
[4294675.564000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 201
[4294675.564000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294675.564000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294675.564000] ehci_hcd 0000:00:1d.7: debug port 1
[4294675.564000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294675.564000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294675.564000] ehci_hcd 0000:00:1d.7: irq 201, io mem 0xffe3fc00
[4294675.568000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294675.568000] hub 5-0:1.0: USB hub found
[4294675.568000] hub 5-0:1.0: 8 ports detected
[4294675.692000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294675.692000] ide0: ports already in use, skipping probe
[4294675.692000] ide1: I/O resource 0x170-0x177 not free.
[4294675.692000] ide1: ports already in use, skipping probe
[4294675.717000] Attempting manual resume
[4294675.723000] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[4294677.265000] ReiserFS: sda5: using ordered data mode
[4294677.284000] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294677.284000] ReiserFS: sda5: checking transaction log (sda5)
[4294677.351000] ReiserFS: sda5: Using r5 hash to sort names
[4294681.793000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[4294681.793000] Uniform CD-ROM driver Revision: 3.20
[4294681.793000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294681.805000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294681.805000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[4294682.635000] hw_random: RNG not detected
[4294682.641000] Linux agpgart interface v0.101 (c) Dave Jones
[4294682.646000] agpgart: Detected an Intel 915GM Chipset.
[4294682.647000] agpgart: Detected 16124K stolen memory.
[4294682.666000] agpgart: AGP aperture is 256M @ 0xd0000000
[4294682.770000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294682.773000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294682.865000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294682.865000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294683.037000] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
[4294683.372000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294683.372000] 8139cp: pci dev 0000:01:0c.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[4294683.372000] 8139cp: Try the "8139too" driver instead.
[4294683.474000] ieee80211_crypt: registered algorithm 'NULL'
[4294683.528000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294683.528000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[4294683.629000] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[4294683.669000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[4294683.705000] ieee1394: Initialized config rom entry `ip1394'
[4294683.718000] ohci1394: $Rev: 1313 $ Ben Collins <email address hidden>
[4294683.718000] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 209
[4294683.771000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[209] MMIO=[ffcff000-ffcff7ff] Max Packet=[2048]
[4294683.796000] 8139too Fast Ethernet driver 0.9.27
[4294683.796000] ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 193
[4294683.797000] eth0: RealTek RTL8139 at 0xf8bacc00, 00:03:0d:3d:ca:43, IRQ 193
[4294683.797000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294683.930000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
[4294683.930000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[4294683.931000] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 217
[4294683.931000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4294684.142000] ts: Compaq touchscreen protocol output
[4294684.276000] ipw2200: Radio Frequency Kill Switch is On:
[4294684.276000] Kill switch must be turned off for wireless networking to work.
[4294684.276000] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[4294684.555000] Intel ISA PCIC probe: not found.
[4294684.752000] lp: driver loaded but no devices found
[4294684.799000] sbp2: $Rev: 1306 $ Ben Collins <email address hidden>
[4294684.799000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294684.799000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294685.078000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d4950e5ce16]
[4294686.008000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294686.008000] md: bitmap version 4.39
[4294688.082000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
[4294692.440000] cdrom: open failed.
[4294712.272000] kjournald starting. Commit interval 5 seconds
[4294712.273000] EXT3 FS on sda1, internal journal
[4294712.273000] EXT3-fs: mounted filesystem with ordered data mode.
[4294712.300000] ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
[4294716.489000] ReiserFS: dm-4: using ordered data mode
[4294716.515000] ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294716.516000] ReiserFS: dm-4: checking transaction log (dm-4)
[4294716.569000] ReiserFS: dm-4: Using r5 hash to sort names
[4294716.682000] Adding 2000084k swap on /dev/mapper/cryptswap. Priority:-1 extents:1 across:2000084k
[4294719.690000] ACPI: AC Adapter [AC0] (on-line)
[4294719.739000] ACPI: Power Button (FF) [PWRF]
[4294719.739000] ACPI: Lid Switch [LID]
[4294719.739000] ACPI: Sleep Button (CM) [SLPB]
[4294719.739000] ACPI: Power Button (CM) [PWRB]
[4294719.808000] ibm_acpi: ec object not found
[4294719.926000] ACPI: Battery Slot [BAT0] (battery present)
[4294719.956000] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[4294725.070000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294725.070000] apm: overridden by ACPI.
[4294725.898000] NET: Registered protocol family 10
[4294725.898000] lo: Disabled Privacy Extensions
[4294725.898000] IPv6 over IPv4 tunneling driver
[4294726.072000] Bluetooth: Core ver 2.8
[4294726.072000] NET: Registered protocol family 31
[4294726.072000] Bluetooth: HCI device and connection manager initialized
[4294726.072000] Bluetooth: HCI socket layer initialized
[4294726.141000] Bluetooth: L2CAP ver 2.8
[4294726.141000] Bluetooth: L2CAP socket layer initialized
[4294726.143000] Bluetooth: RFCOMM socket layer initialized
[4294726.143000] Bluetooth: RFCOMM TTY layer initialized
[4294726.143000] Bluetooth: RFCOMM ver 1.7
[4294780.687000] eth1: link down
[4294780.696000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[4294781.780000] NET: Registered protocol family 17
[4294788.528000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294788.536000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[4294799.047000] eth1: no IPv6 routers present
[4295014.360000] cdrom: open failed.
[4295205.102000] eth1: link down
[4295309.077000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1

root@runaway:~# startx
xauth: creating new authority file /root/.serverauth.10556

X: warning; process set to priority -1 instead of requested priority 0

X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.12 i686
Current Operating System: Linux runaway 2.6.15-19-686 #1 SMP PREEMPT Mon Mar 20 17:33:20 UTC 2006 i686
Build Date: 16 March 2006
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr 3 23:01:05 2006
(==) Using config file: "/etc/X11/xorg.conf"
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(WW) ****INVALID MEM ALLOCATION**** b: 0xffe80000 e: 0xffefffff correcting
(WW) ****INVALID MEM ALLOCATION**** b: 0xffe40000 e: 0xffe7ffff correcting
(EE) end of block range 0xffe7ffff < begin 0xfff00000
(EE) end of block range 0xffe7ffff < begin 0xfff00000
(EE) I810(0): [dri] I830DRIScreenInit failed because of a version mismatch.
[dri] i915 kernel module version is 1.1.0 but version 1.4 or greater is needed.
[dri] Disabling DRI.
error opening security policy file /etc/xserver/SecurityPolicy
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server

   *** If unresolved symbols were reported above, they might not
   *** be the reason for the server aborting.

Backtrace:
0: /usr/bin/X11/X(xf86SigHandler+0x86) [0x80b4a56]
1: [0xffffe420]
2: /usr/lib/xorg/modules/libxaa.so(XAAFillMono8x8PatternRectsScreenOrigin+0xda) [0xb77a7d47]
3: /usr/lib/xorg/modules/libxaa.so(XAAPaintWindow+0x492) [0xb77b41b2]
4: /usr/bin/X11/X [0x8149e30]
5: /usr/bin/X11/X(miWindowExposures+0x1e3) [0x80ff16f]
6: /usr/bin/X11/X [0x80c5039]
7: /usr/bin/X11/X(MapWindow+0x255) [0x8073957]
8: /usr/bin/X11/X(InitRootWindow+0xb6) [0x8073bff]
9: /usr/bin/X11/X(main+0x69b) [0x806e2c7]
10: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xd2) [0xb7d1cea2]
11: /usr/bin/X11/X(FontFileCompleteXLFD+0x81) [0x806d611]

Fatal server error:
Caught signal 11. Server aborting

XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.