Self powered USB drive warning "insufficient available bus power"
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Expired
|
Undecided
|
Unassigned |
Bug Description
When connecting an external USB self-powered hard drive to my PC, I get errors regarding "insufficient available bus power" in /var/log/messages.
There was a workaround in Ubuntu 8.10 which involved change the value of bConfigurationValue for the relevant drive:-
echo -n 1 > /sys/bus/
and restarting ehci-hcd but in 9.04 the restart, "modprobe -r -v ehci-hcd" fails with "FATAL: Module ehci_hcd not found." even though there are log entries in /var/log/messages for ehci-hcd.
Linux farside 2.6.28-11-generic #38-Ubuntu SMP Fri Mar 27 09:00:52 UTC 2009 i686 GNU/Linux
steve@farside:
Description: Ubuntu jaunty (development branch)
Release: 9.04
NOTE: ignore the different Device number it is the same device, just take at a different time
steve@farside:
Bus 001 Device 006: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0702 USB 2.0 IDE Adapter
bcdDevice 0.14
iManufacturer 0
iProduct 1 USB Storage
iSerial 0
bNumConfigura
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurat
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescript
bInterfac
bAlternat
bNumEndpoints 2
bInterfac
bInterfac
bInterfac
iInterface 0
affects: | ubuntu → linux (Ubuntu) |
The device is external USB driver with a 40GB WD driver fitted inside.
My main concern is the driver isn't recognised as self powered, the lack of ehci-hcd modprode restart is a side issue.
It did work very happily in 8.10 with the work around, but it won't work now.