SATA DVD drive not detected

[gtdaqua]

Here is the dmesg output

[code]
[ 3.492191] ata2.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1A, max UDMA/33
[ 3.492201] ata2.00: applying bridge limits
[ 3.524206] ata2.00: configured for UDMA/33
[ 8.524024] ata2.00: qc timeout (cmd 0xa0)
[ 8.524028] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 9.404041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.460210] ata2.00: configured for UDMA/33
[ 14.460023] ata2.00: qc timeout (cmd 0xa0)
[ 14.460026] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 14.460029] ata2: limiting SATA link speed to 1.5 Gbps
[ 14.460032] ata2.00: limiting speed to UDMA/33:PIO3
[ 15.340041] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 15.396210] ata2.00: configured for UDMA/33
[ 20.396023] ata2.00: qc timeout (cmd 0xa0)
[ 20.396026] ata2.00: TEST_UNIT_READY failed (err_mask=0x5)
[ 20.396028] ata2.00: disabled
[ 20.396038] ata2: hard resetting link
[ 21.276039] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 21.276045] ata2: EH complete
[ 21.338514] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[ 21.338517] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 21.338567] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 21.338723] scsi2 : sata_nv
[ 21.338855] scsi3 : sata_nv
[ 21.339071] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 22
[ 21.339074] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 22
[ 22.070434] ata3: SATA link down (SStatus 0 SControl 300)
[ 22.802431] ata4: SATA link down (SStatus 0 SControl 300)
[/code]

I am running 2.6.28-9-generic.

[gtdaqua (gtdaquitaine)]

uname -a:
Linux aquitaine 2.6.28-9-generic #31-Ubuntu SMP Wed Mar 11 15:43:58 UTC 2009 i686 GNU/Linux

[gtdaqua (gtdaquitaine)]

cat /proc/version_signature:

Ubuntu 2.6.28-9.31-generic

[totoro (ton-ami-totoro)]

Hi
I have the same problem but with a other dvd player, can you give us the result of a lshw command. So It's look to be somthing other than the dvd player
Thank you

mine is here:
http://pastebin.com/f39a0cac7

and an other bug report for the same problem:
https://bugs.launchpad.net/ubuntu/+bug/344093

[gtdaqua (gtdaquitaine)]

I installed Ubuntu Karmic Alpha 4 and the SATA DVD drive was detected without any problems!

I am happy that I can move away from Hardy 8.04. Back on the bleeding-edge distro!

Kernel:
Linux trust 2.6.31-5-generic #24-Ubuntu SMP Sat Aug 1 12:48:18 UTC 2009 i686 GNU/Linux

dmesg.log file attached. The output related to SATA DVD in the dmesg is here (no errors reported relating to SATA DVD)

[ 1.283789] Using IPI No-Shortcut mode
[ 1.283969] PM: Resume from disk failed.
[ 1.283984] registered taskstats version 1
[ 1.284133] Magic number: 5:777:11
[ 1.284145] misc pktcdvd!control: hash matches
[ 1.284251] rtc_cmos 00:04: setting system clock to 2009-08-17 05:02:10 UTC (1250485330)
[ 1.284255] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.284257] EDD information not available.
[ 1.286967] sda5 sda6 sda7 >
[ 1.314515] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.380044] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.412199] ata2.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1C, max UDMA/33
[ 1.412209] ata2.00: applying bridge limits
[ 1.452208] ata2.00: configured for UDMA/33
[ 1.456104] scsi 1:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1C PQ: 0 ANSI: 5
[ 1.467147] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.467150] Uniform CD-ROM driver Revision: 3.20
[ 1.467314] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.467448] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.477931] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.477964] Freeing unused kernel memory: 536k freed
[ 1.478361] Write protecting the kernel text: 4548k
[ 1.478397] Write protecting the kernel read-only data: 1828k
[ 1.564212] Linux agpgart interface v0.103
[ 1.587584] [drm] Initialized drm 1.1.0 20060810
[ 1.693018] usb 2-4: new full speed USB device using ohci_hcd and address 2
[ 1.898126] tg3.c:v3.99 (April 20, 2009)
[ 1.898519] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16

Hope the 2.6.31 and higher kernels keeps this drive alive.