iwlagn backports module incompatible with Intel 5100
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux-backports-modules-2.6.24 (Ubuntu) |
Invalid
|
Undecided
|
Unassigned |
Bug Description
Binary package hint: linux-backports
Newer Intel 5100 chips seem to be incompatible with backports driver shipped with Hardy
One symptom I have seen is a failure to load iwlagn causes Out of Memory(OOM) kills at boot time
boot log attached below:
Hardware:
HP 6730b with Intel 5100 chipset.
Ubuntu 8.04 Hardy
Kernel 2.6.24-23-generic
login is possible afterwards, but networking is inoperable.
A possible relevant error from the log below:
iwlagn: Nic access not held from iwl5000_nic_config line 246
boot log:
Press any key to continue.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-generic (buildd@crested) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Mon Jan 26 01:04:16 UTC 2009 (Ubuntu 2.6.24-
[ 0.000000] Command line: root=UUID=
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000077150000 (usable)
[ 0.000000] BIOS-e820: 0000000077150000 - 0000000077160000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077160000 - 000000007b4e0000 (usable)
[ 0.000000] BIOS-e820: 000000007b4e0000 - 000000007b6e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007b6e0000 - 000000007b993000 (usable)
[ 0.000000] BIOS-e820: 000000007b993000 - 000000007b99b000 (reserved)
[ 0.000000] BIOS-e820: 000000007b99b000 - 000000007b9bf000 (usable)
[ 0.000000] BIOS-e820: 000000007b9bf000 - 000000007b9cf000 (reserved)
[ 0.000000] BIOS-e820: 000000007b9cf000 - 000000007bacf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bacf000 - 000000007baff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007baff000 - 000000007bb00000 (usable)
[ 0.000000] BIOS-e820: 000000007bb00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000F68B0 checksum 0
[ 0.000000] ACPI: RSDP 000F68B0, 0024 (r2 HPQOEM)
[ 0.000000] ACPI: XSDT 7BAFE120, 008C (r1 HPQOEM SLIC-MPC F 1000013)
[ 0.000000] ACPI: FACP 7BAFC000, 00F4 (r3 HPQOEM 30DD F HP 1)
[ 0.000000] ACPI: DSDT 7BADF000, 1780D (r1 HPQOEM 30DD 1 INTL 20060912)
[ 0.000000] ACPI: FACS 7BA9D000, 0040
[ 0.000000] ACPI: HPET 7BAFB000, 0038 (r1 HPQOEM 30DD 1 HP 1)
[ 0.000000] ACPI: APIC 7BAFA000, 0084 (r1 HPQOEM 30DD 1 HP 1)
[ 0.000000] ACPI: MCFG 7BAF9000, 003C (r1 HPQOEM 30DD 1 HP 1)
[ 0.000000] ACPI: ASF! 7BAF8000, 00A0 (r32 HPQOEM 30DD 1 HP 1)
[ 0.000000] ACPI: TCPA 7BAF7000, 0032 (r2 HPQOEM 30DD 0 HP 1)
[ 0.000000] ACPI: SSDT 7BADC000, 02DD (r1 HPQOEM SataAhci 1000 INTL 20060912)
[ 0.000000] ACPI: SLIC 7BADA000, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
[ 0.000000] ACPI: SSDT 7BAD9000, 0059 (r1 HPQOEM HPQNLP 1 INTL 20060912)
[ 0.000000] ACPI: DMAR 7BAD8000, 00F8 (r1 \0x01 1 0)
[ 0.000000] ACPI: SSDT 7BAD7000, 066C (r1 PmRef CpuPm 3000 INTL 20060912)
[ 0.000000] ACPI: SSDT 7BAD6000, 0288 (r1 PmRef Cpu0Tst 3000 INTL 20060912)
[ 0.000000] ACPI: SSDT 7BAD5000, 0225 (r1 PmRef ApTst 3000 INTL 20060912)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 000000000000000
[ 0.000000] Bootmem setup node 0 000000000000000
[ 0.000000] No mptable found.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 487760
[ 0.000000] 0: 487776 -> 505056
[ 0.000000] 0: 505568 -> 506259
[ 0.000000] 0: 506267 -> 506303
[ 0.000000] 0: 506623 -> 506624
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ef000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000ef000 - 0000000000100000
[ 0.000000] swsusp: Registered nosave memory region: 0000000077150000 - 0000000077160000
[ 0.000000] swsusp: Registered nosave memory region: 000000007b4e0000 - 000000007b6e0000
[ 0.000000] swsusp: Registered nosave memory region: 000000007b993000 - 000000007b99b000
[ 0.000000] swsusp: Registered nosave memory region: 000000007b9bf000 - 000000007b9cf000
[ 0.000000] swsusp: Registered nosave memory region: 000000007b9cf000 - 000000007bacf000
[ 0.000000] swsusp: Registered nosave memory region: 000000007bacf000 - 000000007baff000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 497527
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against HPET
[ 29.474344] time.c: Detected 2260.721 MHz processor.
[ 29.475529] Console: colour VGA+ 80x25
[ 29.475532] console [tty0] enabled
[ 29.481563] console [ttyS0] enabled
[ 30.113000] Checking aperture...
[ 30.134167] Memory: 1982636k/2026496k available (2492k kernel code, 40048k reserved, 1316k data, 320k init)
[ 30.143993] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
[ 30.230811] Calibrating delay using timer specific routine.. 4532.85 BogoMIPS (lpj=9065706)
[ 30.239300] Security Framework initialized
[ 30.243452] SELinux: Disabled at boot.
[ 30.247345] AppArmor: AppArmor initialized
[ 30.251492] Failure registering capabilities with primary security module.
[ 30.258560] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 30.267007] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 30.274686] Mount-cache hash table entries: 256
[ 30.279378] Initializing cgroup subsys ns
[ 30.283444] Initializing cgroup subsys cpuacct
[ 30.287947] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.292752] CPU: L2 cache: 3072K
[ 30.296032] CPU 0/0 -> Node 0
[ 30.299053] using mwait in idle threads.
[ 30.303018] CPU: Physical Processor ID: 0
[ 30.307070] CPU: Processor Core ID: 0
[ 30.310798] SMP alternatives: switching to UP code
[ 30.316392] Early unpacking initramfs... done
[ 30.614211] ACPI: Core revision 20070126
[ 30.618275] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 30.672689] Using local APIC timer interrupts.
[ 30.721331] Detected 16.622 MHz APIC timer.
[ 30.725639] SMP alternatives: switching to SMP code
[ 30.731240] Booting processor 1/2 APIC 0x1
[ 30.745795] Initializing CPU#1
[ 30.825363] Calibrating delay using timer specific routine.. 4521.41 BogoMIPS (lpj=9042838)
[ 30.825368] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 30.825369] CPU: L2 cache: 3072K
[ 30.825371] CPU 1/1 -> Node 0
[ 30.825372] CPU: Physical Processor ID: 0
[ 30.825373] CPU: Processor Core ID: 1
[ 30.825379] CPU1: Thermal monitoring enabled (TM2)
[ 30.825821] Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 06
[ 30.825882] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 30.893940] Brought up 2 CPUs
[ 30.897238] net_namespace: 120 bytes
[ 30.901178] Time: 15:13:47 Date: 02/17/09
[ 30.905350] NET: Registered protocol family 16
[ 30.910010] ACPI: bus type pci registered
[ 30.914142] PCI: Using configuration type 1
[ 30.922446] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 30.991101] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 31.013483] ACPI: Interpreter enabled
[ 31.017205] ACPI: (supports S0 S3 S4 S5)
[ 31.021483] ACPI: Using IOAPIC for interrupt routing
[ 31.036530] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 31.043377] ACPI: EC: driver started in interrupt mode
[ 31.048600] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 31.057052] PCI: Transparent bridge - 0000:00:1e.0
[ 31.079638] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 31.087626] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 31.095611] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 31.103608] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 31.111948] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 31.119929] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 31.128265] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 31.136253] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 31.145550] ACPI: Power Resource [APPR] (off)
[ 31.150196] ACPI: Power Resource [COMP] (on)
[ 31.154747] ACPI: Power Resource [LPP] (on)
[ 31.159097] ACPI: Power Resource [PFN0] (off)
[ 31.163610] ACPI: Power Resource [PFN1] (off)
[ 31.168124] ACPI: Power Resource [PFN2] (off)
[ 31.172647] ACPI: Power Resource [PFN3] (off)
[ 31.177159] ACPI: Power Resource [PFN4] (off)
[ 31.181610] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 31.187335] pnp: PnP ACPI init
[ 31.190450] ACPI: bus type pnp registered
[ 31.199747] pnp: PnP ACPI: found 14 devices
[ 31.203987] ACPI: ACPI bus type pnp unregistered
[ 31.208836] PCI: Using ACPI for IRQ routing
[ 31.213073] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 31.240490] NET: Registered protocol family 8
[ 31.244896] NET: Registered protocol family 20
[ 31.249420] PCI-GART: No AMD northbridge found.
[ 31.254022] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 31.259577] hpet0: 4 64-bit timers, 14318180 Hz
[ 31.265194] AppArmor: AppArmor Filesystem Enabled
[ 31.269948] Time: tsc clocksource has been installed.
[ 31.289873] system 00:01: iomem range 0xfed1c000-
[ 31.297412] system 00:01: iomem range 0xfed10000-
[ 31.304949] system 00:01: iomem range 0xfed18000-
[ 31.312485] system 00:01: iomem range 0xfed19000-
[ 31.320021] system 00:01: iomem range 0xe0000000-
[ 31.327557] system 00:01: iomem range 0xfec00000-
[ 31.335092] system 00:01: iomem range 0xfed20000-
[ 31.342271] system 00:01: iomem range 0xfed45000-
[ 31.349454] system 00:05: iomem range 0xfed00000-
[ 31.356635] system 00:07: ioport range 0x200-0x27f has been reserved
[ 31.363035] system 00:07: ioport range 0x1000-0x1003 has been reserved
[ 31.369604] system 00:07: ioport range 0x1010-0x101f has been reserved
[ 31.376180] system 00:07: ioport range 0xffff-0xffff has been reserved
[ 31.382757] system 00:07: ioport range 0x400-0x47f has been reserved
[ 31.389156] system 00:07: ioport range 0x500-0x57f has been reserved
[ 31.396133] system 00:07: ioport range 0xef80-0xef9f has been reserved
[ 31.403068] PCI: Bridge: 0000:00:1c.0
[ 31.406789] IO window: disabled.
[ 31.410254] MEM window: 98800000-988fffff
[ 31.414499] PREFETCH window: disabled.
[ 31.418492] PCI: Bridge: 0000:00:1c.1
[ 31.422211] IO window: disabled.
[ 31.425676] MEM window: 98700000-987fffff
[ 31.429920] PREFETCH window: disabled.
[ 31.433911] PCI: Bridge: 0000:00:1c.2
[ 31.437638] IO window: 4000-5fff
[ 31.441103] MEM window: 94000000-97ffffff
[ 31.445346] PREFETCH window: disabled.
[ 31.449338] PCI: Bridge: 0000:00:1c.4
[ 31.453063] IO window: 2000-3fff
[ 31.456527] MEM window: 90000000-93ffffff
[ 31.460771] PREFETCH window: disabled.
[ 31.464753] PCI: Bridge: 0000:00:1c.5
[ 31.468472] IO window: disabled.
[ 31.471936] MEM window: 98600000-986fffff
[ 31.476181] PREFETCH window: disabled.
[ 31.480163] PCI: Bridge: 0000:00:1e.0
[ 31.483882] IO window: disabled.
[ 31.487346] MEM window: 98500000-985fffff
[ 31.491589] PREFETCH window: disabled.
[ 31.495634] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.503215] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 31.510791] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 31.518367] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 31.525929] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 31.533501] NET: Registered protocol family 2
[ 31.577317] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 31.585016] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 31.594414] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 31.601753] TCP: Hash tables configured (established 262144 bind 65536)
[ 31.608413] TCP reno registered
[ 31.621312] checking if image is initramfs... it is
[ 32.201622] Freeing initrd memory: 7193k freed
[ 32.210380] audit: initializing netlink socket (disabled)
[ 32.215852] audit(123488362
[ 32.222123] VFS: Disk quotas dquot_6.5.1
[ 32.226151] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 32.232725] io scheduler noop registered
[ 32.236700] io scheduler anticipatory registered
[ 32.241368] io scheduler deadline registered
[ 32.245762] io scheduler cfq registered (default)
[ 32.254194] assign_
[ 32.259672] assign_
[ 32.265142] assign_
[ 32.270602] assign_
[ 32.276069] assign_
[ 32.300140] Real Time Clock Driver v1.12ac
[ 32.304575] Linux agpgart interface v0.102
[ 32.308727] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 32.316648] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.323189] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 32.329388] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 32.337060] input: Macintosh mouse button emulation as /devices/
[ 32.344923] PNP: PS/2 Controller [PNP0303:
[ 32.354465] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 32.361818] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 32.366835] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 32.372022] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 32.377209] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 32.382397] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 32.400016] mice: PS/2 mouse device common for all mice
[ 32.405315] cpuidle: using governor ladder
[ 32.409478] cpuidle: using governor menu
[ 32.413555] NET: Registered protocol family 1
[ 32.418051] registered taskstats version 1
[ 32.422294] Magic number: 13:11:235
[ 32.426033] hash matches device ttyv5
[ 32.429958] hash matches device PNP0C0B:00
[ 32.434293] hash matches device device:4f
[ 32.434340] input: AT Translated Set 2 keyboard as /devices/
[ 32.447191] /build/
[ 32.455847] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 32.461896] EDD information not available.
[ 32.466052] Freeing unused kernel memory: 320k freed
[ 32.472082] Write protecting the kernel read-only data: 1036k
Loading, please wait...
Begin: Loading essential drivers... ...
[ 32.608138] fuse init (API version 7.9)
[ 32.621371] ACPI: Transitioning device [FAN0] to D3
[ 32.626307] ACPI: Transitioning device [FAN0] to D3
[ 32.631241] ACPI: Fan [FAN0] (off)
[ 32.634905] ACPI: Transitioning device [FAN1] to D3
[ 32.639839] ACPI: Transitioning device [FAN1] to D3
[ 32.644772] ACPI: Fan [FAN1] (off)
[ 32.648436] ACPI: Transitioning device [FAN2] to D3
[ 32.653368] ACPI: Transitioning device [FAN2] to D3
[ 32.658300] ACPI: Fan [FAN2] (off)
[ 32.661962] ACPI: Transitioning device [FAN3] to D3
[ 32.666895] ACPI: Transitioning device [FAN3] to D3
[ 32.671828] ACPI: Fan [FAN3] (off)
[ 32.675490] ACPI: Transitioning device [FAN4] to D3
[ 32.680422] ACPI: Transitioning device [FAN4] to D3
[ 32.685353] ACPI: Fan [FAN4] (off)
[ 32.692595] ACPI: SSDT 7B9C8C18, 0275 (r1 PmRef Cpu0Ist 3000 INTL 20060912)
[ 32.700508] ACPI: SSDT 7B9C6618, 057B (r1 PmRef Cpu0Cst 3001 INTL 20060912)
[ 32.710986] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 32.716222] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 32.722804] ACPI: SSDT 7B9C7E18, 01D7 (r1 PmRef ApIst 3000 INTL 20060912)
[ 32.730766] ACPI: SSDT 7B9C8F18, 008D (r1 PmRef ApCst 3000 INTL 20060912)
[ 32.740355] Marking TSC unstable due to TSC halts in idle
[ 32.745814] Time: hpet clocksource has been installed.
[ 32.763056] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 32.768313] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 32.774612] ACPI Exception (processor_
[ 32.784483] ACPI Exception (processor_
[ 32.802441] ACPI: Thermal Zone [DTSZ] (40 C)
[ 32.813816] ACPI: Thermal Zone [CPUZ] (47 C)
[ 32.822269] ACPI: Thermal Zone [SKNZ] (39 C)
[ 32.831037] ACPI: Thermal Zone [BATZ] (26 C)
[ 32.838149] ACPI: Thermal Zone [FDTZ] (25 C)
Done.
Begin: Running /scripts/
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
[ 33.136291] usbcore: registered new interface driver usbfs
[ 33.141877] usbcore: registered new interface driver hub
[ 33.147657] usbcore: registered new device driver usb
[ 33.153439] USB Universal Host Controller Interface driver v3.0
[ 33.159495] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 33.167102] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 33.172666] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 33.180186] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060c0
[ 33.186295] usb usb1: configuration #1 chosen from 1 choice
[ 33.191963] hub 1-0:1.0: USB hub found
[ 33.195805] hub 1-0:1.0: 2 ports detected
[ 33.283466] SCSI subsystem initialized
[ 33.305480] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 33.313051] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 33.318692] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 33.326210] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000060a0
[ 33.332128] usb usb2: configuration #1 chosen from 1 choice
[ 33.337833] hub 2-0:1.0: USB hub found
[ 33.341651] hub 2-0:1.0: 2 ports detected
[ 33.453134] ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 33.460708] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 33.466199] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 33.473683] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00006080
[ 33.479556] usb usb3: configuration #1 chosen from 1 choice
[ 33.485212] hub 3-0:1.0: USB hub found
[ 33.489017] hub 3-0:1.0: 2 ports detected
[ 33.596823] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 33.604421] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 33.609729] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 33.617205] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006060
[ 33.623096] usb usb4: configuration #1 chosen from 1 choice
[ 33.628750] hub 4-0:1.0: USB hub found
[ 33.632558] hub 4-0:1.0: 2 ports detected
[ 33.642765] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 33.650225] Clocksource tsc unstable (delta = -70509699 ns)
[ 33.656233] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 33.663749] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 33.669056] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 33.676524] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00006040
[ 33.682969] usb usb5: configuration #1 chosen from 1 choice
[ 33.688594] hub 5-0:1.0: USB hub found
[ 33.692406] hub 5-0:1.0: 2 ports detected
[ 33.704300] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 33.709107] usb 2-1: configuration #1 chosen from 1 choice
[ 33.717377] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 33.722664] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 33.730142] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006020
[ 33.736010] usb usb6: configuration #1 chosen from 1 choice
[ 33.741659] hub 6-0:1.0: USB hub found
[ 33.745457] hub 6-0:1.0: 2 ports detected
[ 33.754267] ACPI: PCI Interrupt 0000:00:1a.7[D] -> GSI 19 (level, low) -> IRQ 19
[ 33.762671] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 33.767984] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
[ 33.779319] ehci_hcd 0000:00:1a.7: debug port 1
[ 33.783924] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98904c00
[ 33.804611] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 33.812218] usb usb7: configuration #1 chosen from 1 choice
[ 33.817875] hub 7-0:1.0: USB hub found
[ 33.821746] usb 2-1: USB disconnect, address 2
[ 33.821765] hub 7-0:1.0: 6 ports detected
[ 33.837164] ACPI: PCI Interrupt 0000:86:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 33.896793] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[98500000-
[ 33.918525] tg3.c:v3.86 (November 9, 2007)
[ 33.922742] ACPI: PCI Interrupt 0000:85:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 33.955209] eth0: Tigon3 [partno(BCM95751) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:22:64:70:7c:41
[ 33.966574] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 33.974103] eth0: dma_rwctrl[
[ 33.979445] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 21
[ 33.987752] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x23) don't match, using nr_ports
[ 33.997190] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
[ 34.016786] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 34.035427] usb 2-1: configuration #1 chosen from 1 choice
[ 34.074586] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 34.082766] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
[ 34.090926] scsi0 : ahci
[ 34.093567] scsi1 : ahci
[ 34.096220] scsi2 : ahci
[ 34.098859] scsi3 : ahci
[ 34.101525] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 506
[ 34.109878] ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 506
[ 34.118212] ata3: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904200 irq 506
[ 34.125763] ata4: SATA max UDMA/133 abar m2048@0x98904000 port 0x98904280 irq 506
[ 34.201455] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 34.208461] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40F, max UDMA/100
[ 34.215484] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 34.223247] ata1.00: configured for UDMA/100
[ 34.256848] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 34.282743] ata2.00: ATAPI: Optiarc DVD RW AD-7561S, AH03, max UDMA/100
[ 34.309427] ata2.00: configured for UDMA/100
[ 34.326641] ata3: SATA link down (SStatus 0 SControl 0)
[ 34.344591] ata4: SATA link down (SStatus 0 SControl 0)
[ 34.349961] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[ 34.359188] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH03 PQ: 0 ANSI: 5
[ 34.367479] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 20 (level, low) -> IRQ 20
[ 34.375878] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 34.381237] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 34.392647] ehci_hcd 0000:00:1d.7: debug port 1
[ 34.397278] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98904800
[ 34.409387] Driver 'sd' needs updating - please use bus_type methods
[ 34.415879] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 34.423093] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 34.430728] usb usb8: configuration #1 chosen from 1 choice
[ 34.436386] hub 8-0:1.0: USB hub found
[ 34.440194] hub 8-0:1.0: 6 ports detected
[ 34.440197] Driver 'sr' needs updating - please use bus_type methods
[ 34.440787] sd 0:0:0:0: [sda] Write Protect is off
[ 34.440802] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.440835] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 34.440842] sd 0:0:0:0: [sda] Write Protect is off
[ 34.440854] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 34.440857] sda: sda1 sda2 < sda5 >
[ 34.499103] sd 0:0:0:0: [sda] Attached SCSI disk
[ 34.506662] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 34.512067] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 34.520237] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 34.527806] Uniform CD-ROM driver Revision: 3.20
Done.
Begin: Running /scripts/
[ 34.692953] Attempting manual resume
kinit: name_to_
kinit: trying to resume from /dev/disk/
kinit: No resume image, doing normal boot...
Done.
[ 34.739487] kjournald starting. Commit interval 5 seconds
[ 34.739528] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/
Done.
Done.
Begin: Running /scripts/
Done.
* Reading files needed to boot... \0x1b[80G \0x1b[74G[ OK ]
* Setting preliminary keymap... \0x1b[80G \0x1b[74G[ OK ]
* Preparing restricted drivers... \0x1b[80G \0x1b[74G[ OK ]
* Setting the system clock
* Starting basic networking... \0x1b[80G \0x1b[74G[ OK ]
* Starting kernel event manager... \0x1b[80G \0x1b[74G[ OK ]
* Loading hardware drivers... \0x1b[80G [ 41.722822] tpm_inf_pnp 00:04: Found GTPM with ID IFX0102
[ 41.728344] tpm_inf_pnp 00:04: TPM found: config base 0xfe00, data base 0xfe80, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 41.810665] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.823368] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 41.844360] input: Power Button (FF) as /devices/
[ 41.853337] input: PC Speaker as /devices/
[ 41.931431] ACPI: Battery Slot [BAT0] (battery present)
[ 41.936952] ACPI: Battery Slot [BAT1] (battery absent)
[ 41.962311] ACPI: Power Button (FF) [PWRF]
[ 41.966597] input: Sleep Button (CM) as /devices/
[ 42.081577] ACPI: Sleep Button (CM) [SLPB]
[ 42.085809] input: Lid Switch as /devices/
[ 42.113611] ACPI: Lid Switch [LID]
[ 42.117470] ACPI: AC Adapter [AC] (on-line)
[ 42.217008] input: Video Bus as /devices/
[ 42.289629] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 42.635411] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04711/0xa00000
[ 42.684397] input: SynPS/2 Synaptics TouchPad as /devices/
[ 42.755614] parport_pc 00:0a: reported by Plug and Play ACPI
[ 42.761457] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,
[ 42.777981] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.3.5kds
[ 42.785303] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 42.791240] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 42.799784] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 42.843194] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 42.849976] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 42.923565] input: 5100AGN as /devices/
\0x1b[74G[ OK ]
* Setting the system clock
* Loading kernel modules... \0x1b[80G * Loading manual drivers... \0x1b[80G [ 43.877274] lp0: using parport0 (interrupt-driven).
\0x1b[74G[ OK ]
* Setting kernel variables... \0x1b[80G \0x1b[74G[ OK ]
* Activating swap... \0x1b[80G \0x1b[74G[ OK ]
* Checking root file system... \0x1b[80G fsck 1.40.8 (13-Mar-2008)
/dev/sda1: clean, 139468/9404416 files, 1134753/37614181 blocks
\0x1b[74G[ OK ]
* Checking file systems... \0x1b[80G fsck 1.40.8 (13-Mar-2008)
\0x1b[74G[ OK ]
* Mounting local filesystems... \0x1b[80G \0x1b[74G[ OK ]
* Activating swapfile swap... \0x1b[80G \0x1b[74G[ OK ]
$Mounting securityfs on /sys/kernel/
Loading AppArmor profiles : done.
* Checking minimum space in /tmp... \0x1b[80G \0x1b[74G[ OK ]
* Skipping firewall: ufw (not enabled)... \0x1b[80G \0x1b[74G[ OK ]
* Configuring network interfaces... \0x1b[80G \0x1b[74G[ OK ]
* Saving VESA state... \0x1b[80G \0x1b[74G[ OK ]
* Loading ACPI modules... \0x1b[80G \0x1b[74G[ OK ]
* Starting ACPI services... \0x1b[80G \0x1b[74G[ OK ]
* Starting system log daemon... \0x1b[80G \0x1b[74G[ OK ]
* Doing Wacom setup... \0x1b[80G \0x1b[74G[ OK ]
* Starting kernel log daemon... \0x1b[80G \0x1b[74G[ OK ]
* Starting system message bus dbus \0x1b[80G
Ubuntu 8.04 blucher ttyS0
blucher login: \0x1b[74G[ OK ]
* Starting network connection manager NetworkManager \0x1b[80G \0x1b[74G[ OK ]
* Starting network events dispatcher NetworkManagerD
* Starting System Tools Backends system-
* Starting Avahi mDNS/DNS-SD Daemon avahi-daemon \0x1b[80G \0x1b[74G[ OK ]
* Starting Common Unix Printing System: cupsd \0x1b[80G \0x1b[74G[ OK ]
* Starting powernowd... \0x1b[80G \0x1b[74G[ OK ]
* Starting DHCP D-Bus daemon dhcdbd \0x1b[80G \0x1b[74G[ OK ]
* Starting Hardware abstraction layer hald \0x1b[80G \0x1b[74G[ OK ]
* Starting bluetooth \0x1b[80G [ 47.941900] iwlagn: Nic access not held from iwl5000_nic_config line 246
[ 48.011773] Out of memory: kill process 5423 (hald) score 12801 or a child
[ 48.018709] Killed process 5427 (hald-runner)
[ 48.049945] Out of memory: kill process 5261 (avahi-daemon) score 11123 or a child
[ 48.057587] Killed process 5262 (avahi-daemon)
[ 48.085816] Out of memory: kill process 5261 (avahi-daemon) score 7425 or a child
[ 48.093367] Killed process 5261 (avahi-daemon)
[ 48.121503] Out of memory: kill process 5190 (dbus-daemon) score 5330 or a child
[ 48.128964] Killed process 5190 (dbus-daemon)
[ 48.166293] Out of memory: kill process 5510 (hald-addon-acpi) score 4168 or a child
[ 48.174125] Killed process 5510 (hald-addon-acpi)
[ 48.194404] Out of memory: kill process 5103 (syslogd) score 3074 or a child
[ 48.201535] Killed process 5103 (syslogd)
[ 48.219382] Out of memory: kill process 5166 (klogd) score 1503 or a child
[ 48.226367] Killed process 5166 (klogd)
[ 48.243259] Out of memory: kill process 5295 (cupsd) score 1129 or a child
[ 48.250185] Killed process 5295 (cupsd)
[ 48.267243] Out of memory: kill process 5208 (NetworkManager) score 820 or a child
[ 48.274875] Killed process 5208 (NetworkManager)
[ 48.288453] iwlagn: Tx 15 queue init failed
[ 48.293415] iwlagn: Unable to init nic
\0x1b[74G[ OK ]
* Starting GNOME Display Manager... \0x1b[80G dhcdbd: Shut down.
\0x1b[74G[ OK ]
* Starting anac(h)ronistic cron anacron \0x1b[80G \0x1b[74G[ OK ]
* Starting deferred execution scheduler atd \0x1b[80G \0x1b[74G[ OK ]
* Starting periodic command scheduler crond \0x1b[80G \0x1b[74G[ OK ]
* Checking battery state... \0x1b[80G \0x1b[74G[ OK ]
* Running local boot scripts (/etc/rc.local) \0x1b[80G \0x1b[74G[ OK ]
ini\0xf4
Ubuntu 8.04 blucher ttyS0
I have a HP 8530p with 4GB RAM, running Kubuntu 8.04 (2.6.24- 24-generic) .
I dont get 'Out of memory' errors, but my wireless doesnt work just the same.
[ 493.230006] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 493.230101] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100002, writing 100006)
[ 493.230389] iwlagn: Nic access not held from iwl5000_nic_config line 246
[ 493.843361] iwlagn: START_ALIVE timeout after 4000ms.
[ 493.843469] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 496.081849] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 496.081943] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100002, writing 100006)
[ 496.082232] iwlagn: Nic access not held from iwl5000_nic_config line 246
[ 498.284031] iwlagn: START_ALIVE timeout after 4000ms.
[ 498.284121] ACPI: PCI interrupt for device 0000:03:00.0 disabled
[ 518.321344] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 518.321434] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100002, writing 100006)
[ 518.321727] iwlagn: Nic access not held from iwl5000_nic_config line 246
[ 518.890404] iwlagn: START_ALIVE timeout after 4000ms.
[ 518.890496] ACPI: PCI interrupt for device 0000:03:00.0 disabled