alert! /dev/disk/by-uuid/be80cf42-e6f2-466c-bb73-7d664956a334 does not exist

Bug #315572 reported by asiweb
2
Affects Status Importance Assigned to Milestone
Ubuntu
New
Undecided
Unassigned

Bug Description

Install the alpha of ubuntu 9.04 and when I want to boot goes out me this
--------------------------------------------------------------------------------
gave up waiting for root device. common problems
-boot args (cat/ proc/cmdline)
-check rootdelay=(did the system wait lon enough?)
-check root=did the system wait for the right device?)
-missing modules(cat /proc/modules;ls/dev)
Alert! /dev/disk/by-uuid/be80cf42-e6f2-466c-bb73-7d664956a334 does not exit dropping to a shell
(initranfs)[35.816049] ata1.00:exception Emask 0x0 sAct 0x3 SErr 0x0 action 0x6 frozen
[35.816114]ata1.00:cmd 60/08:00:78:63:38/00:00:1d:00:00/40 tag 0 ncq 4096 in
[35.816115] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4(timeout)
---------------------------------------------------------------------------------
And when push exit can continue the start of ubuntu

chipset NVIDIA GeForce 7050 / nForce 630A MCP

kernel 2.6.28-4-generic x86_64

 disk sda
/dev/sda1 * 1 30333 243649791 83 Linux
/dev/sda2 30334 30515 1461915 5 Extended
/dev/sda5 30334 30515 1461883+ 82 Linux swap / Solaris

lspci
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:10.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:11.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
01:08.1 Input device controller: Creative Labs SB Live! Game Port (rev 08)
02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1)

lsmod
Module Size Used by
nls_iso8859_1 13440 1
isofs 43688 1
nls_cp437 15104 1
vfat 21120 1
fat 65592 1 vfat
udf 92584 0
crc_itu_t 10496 1 udf
binfmt_misc 18572 1
bridge 63776 0
stp 11140 1 bridge
bnep 23040 2
powernow_k8 23684 1
video 29076 0
output 11648 1 video
ppdev 16776 0
parport_pc 45096 0
lp 19588 0
parport 49712 3 ppdev,parport_pc,lp
snd_emu10k1_synth 15488 0
snd_emux_synth 46080 1 snd_emu10k1_synth
snd_seq_virmidi 14464 1 snd_emux_synth
snd_seq_midi_emul 16000 1 snd_emux_synth
snd_emu10k1 162848 4 snd_emu10k1_synth
snd_seq_midi 15744 0
snd_seq_midi_event 16512 2 snd_seq_virmidi,snd_seq_midi
snd_rawmidi 33920 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
pcspkr 11136 0
psmouse 63772 0
k8temp 13440 0
serio_raw 14468 0
snd_ac97_codec 133848 1 snd_emu10k1
ac97_bus 10368 1 snd_ac97_codec
snd_pcm 98952 2 snd_emu10k1,snd_ac97_codec
snd_page_alloc 18704 2 snd_emu10k1,snd_pcm
snd_util_mem 13184 2 snd_emux_synth,snd_emu10k1
snd_hwdep 16776 2 snd_emux_synth,snd_emu10k1
snd_seq 66144 5 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_midi_event
snd_timer 34064 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 16276 6 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_midi,snd_rawmidi,snd_seq
emu10k1_gp 11520 0
snd 78792 16 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_hwdep,snd_seq,snd_timer,snd_seq_device
gameport 21648 2 emu10k1_gp
soundcore 16800 1 snd
joydev 20864 0
usbhid 47040 0
usb_storage 94016 1
forcedeth 68240 0
ehci_hcd 49676 0
ohci_hcd 35100 0
fbcon 49792 0
tileblit 11264 1 fbcon
font 17024 1 fbcon
bitblit 14464 1 fbcon
softcursor 10368 1 bitblit
fuse 67264 3

dmesg|grep ata
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[ 0.000000] modified: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.004000] Memory: 2025904k/2096832k available (4634k kernel code, 452k absent, 69904k reserved, 2512k data, 528k init)
[ 0.478311] libata version 3.00 loaded.
[ 1.850464] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
[ 1.850467] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
[ 1.850470] ata3: SATA max UDMA/133 abar m8192@0xfbf7a000 port 0xfbf7a200 irq 23
[ 1.850472] ata4: SATA max UDMA/133 abar m8192@0xfbf7a000 port 0xfbf7a280 irq 23
[ 2.736022] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.738456] ata1.00: ATA-7: Maxtor 6V250F0, VA111680, max UDMA/133
[ 2.738459] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.741644] ata1.00: configured for UDMA/133
[ 3.628022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.630126] ata2.00: ATA-7: Maxtor 6L160M0, BANC1G10, max UDMA/133
[ 3.630128] ata2.00: 320173056 sectors, multi 0: LBA48 NCQ (not used)
[ 3.633133] ata2.00: configured for UDMA/133
[ 3.952021] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.272021] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.335694] pata_amd 0000:00:06.0: version 0.3.10
[ 4.335733] pata_amd 0000:00:06.0: setting latency timer to 64
[ 4.335837] scsi4 : pata_amd
[ 4.335986] scsi5 : pata_amd
[ 4.337371] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 4.337373] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.508563] ata5.00: ATAPI: PHILIPS PBDV1640P, B3.7, max UDMA/33
[ 4.508586] ata5.01: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max UDMA/33
[ 4.508606] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
[ 4.508609] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
[ 4.524503] ata5.00: configured for UDMA/33
[ 4.540236] ata5.01: configured for UDMA/33
[ 4.544695] ata6: port disabled. ignoring.
[ 4.639941] Write protecting the kernel read-only data: 6556k
[ 35.816049] ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x0 action 0x6 frozen
[ 35.816114] ata1.00: cmd 60/08:00:78:63:38/00:00:1d:00:00/40 tag 0 ncq 4096 in
[ 35.816230] ata1.00: status: { DRDY }
[ 35.816285] ata1.00: cmd 60/40:08:20:00:00/00:00:00:00:00/40 tag 1 ncq 32768 in
[ 35.816419] ata1.00: status: { DRDY }
[ 35.816485] ata1: hard resetting link
[ 36.300021] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 36.305945] ata1.00: configured for UDMA/133
[ 36.305955] ata1: EH complete
[ 567.493123] EXT3-fs: mounted filesystem with ordered data mode.

asiweb (asiweb)
description: updated
description: updated
asiweb (asiweb)
description: updated
asiweb (asiweb)
description: updated
Revision history for this message
scragar (scragar) wrote : Re: alert! /dev/disk/by-uuid/b16e287e-33fd-48ff-b60e-299d32d411f1 does not exist

Once you are booted I would check

cat /etc/fstab

and match up the line, once you have found the line, the line above it should have the device name, replace the UUID with the correct one, as per the output of

blkid

Revision history for this message
scragar (scragar) wrote :

OK, I can't edit that comment, so I guess I've have to make a new one, when you want to replace the UUID with the correct one you will need root perms, so

sudo nano /etc/fstab

Revision history for this message
asiweb (asiweb) wrote :

when I run the command sudo Vol_ id / dev/sda1

I get the uuid is the same as in the fstab so it I do not understand because I have this error

I installed Ubuntu 8.04.1 and I do not have this problem

description: updated
Revision history for this message
asiweb (asiweb) wrote :
Download full text (8.1 KiB)

in ubuntu 8.04.1

lsmod
Module Size Used by
isofs 39336 0
udf 91048 1
ipv6 311848 10
af_packet 27272 2
rfcomm 47392 2
l2cap 28800 13 rfcomm
bluetooth 67620 4 rfcomm,l2cap
ppdev 11400 0
powernow_k8 16608 1
cpufreq_conservative 10632 0
cpufreq_userspace 6180 0
cpufreq_ondemand 11152 1
cpufreq_powersave 3200 0
cpufreq_stats 8416 0
freq_table 6464 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
container 6656 0
dock 12960 0
sbs 17808 0
sbshc 8960 1 sbs
video 23444 0
output 5632 1 video
battery 16776 0
iptable_filter 4608 0
ip_tables 24104 1 iptable_filter
x_tables 23560 1 ip_tables
ac 8328 0
w83627ehf 27272 0
hwmon_vid 5120 1 w83627ehf
parport_pc 41128 0
lp 14916 0
parport 44300 3 ppdev,parport_pc,lp
snd_emu10k1_synth 9472 0
snd_emux_synth 40960 1 snd_emu10k1_synth
snd_seq_virmidi 9344 1 snd_emux_synth
snd_seq_midi_emul 9088 1 snd_emux_synth
snd_emu10k1 162272 4 snd_emu10k1_synth
snd_ac97_codec 123224 1 snd_emu10k1
ac97_bus 3840 1 snd_ac97_codec
snd_pcm_oss 47648 0
snd_mixer_oss 20224 1 snd_pcm_oss
snd_pcm 92168 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 13200 2 snd_emu10k1,snd_pcm
snd_util_mem 6656 2 snd_emux_synth,snd_emu10k1
snd_hwdep 12552 2 snd_emux_synth,snd_emu10k1
snd_seq_dummy 5764 0
snd_seq_oss 38912 0
snd_seq_midi 10688 0
joydev 15488 0
nvidia 8858052 34
snd_rawmidi 29856 3 snd_seq_virmidi,snd_emu10k1,snd_seq_midi
snd_seq_midi_event 10112 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq 63232 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 27912 3 snd_emu10k1,snd_pcm,snd_seq
wmi_acer 11076 0
serio_raw 9092 0
i2c_core 28544 1 nvidia
snd_seq_device 10644 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 70856 20 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 46236 0
emu10k1_gp 5632 0
gameport 17936 2 emu10k1_gp
soundcore 10400 1 snd
button 10912 0
evdev 14976 4
k8temp 7680 0
shpchp 38172 0
pci_hotplug 34608 1 shpchp
pcspkr 4992 0
ext3 149264 1
jbd ...

Read more...

Revision history for this message
asiweb (asiweb) wrote :

Have found a temporary workaround to the problem

edit /boot/grub/menu.list
-----------------------------------------
change
----------------------------------------
kernel /boot/vmlinuz-2.6.28-4-generic root=UUID=1e1130c3-92d4-41af-b5b8-51377e9f9f16 ro quiet splash
---------------------------------------
to
---------------------------------------
kernel /boot/vmlinuz-2.6.28-4-generic root=UUID=1e1130c3-92d4-41af-b5b8-51377e9f9f16 ro quiet splash rootdelay=90

Revision history for this message
asiweb (asiweb) wrote :

I Have found the problem

I Have changed the hard disk And has resolved me the problem of the start

the problem was of the hard disk

Revision history for this message
asiweb (asiweb) wrote :

What see is that to the not using the command ncq do not have problems

dmesg|grep ata
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[ 0.000000] modified: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.004000] Memory: 2025896k/2096832k available (4641k kernel code, 452k absent, 69908k reserved, 2513k data, 528k init)
[ 0.477388] libata version 3.00 loaded.
[ 1.842732] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
[ 1.842735] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
[ 1.842737] ata3: SATA max UDMA/133 abar m8192@0xfbf7a000 port 0xfbf7a200 irq 23
[ 1.842739] ata4: SATA max UDMA/133 abar m8192@0xfbf7a000 port 0xfbf7a280 irq 23
[ 2.728023] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.730131] ata1.00: ATA-7: Maxtor 6L160M0, BANC1G10, max UDMA/133
[ 2.730134] ata1.00: 320173056 sectors, multi 0: LBA48 NCQ (not used)
[ 2.733125] ata1.00: configured for UDMA/133
[ 3.620022] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.622240] ata2.00: ATA-7: Maxtor 6V250F0, VA111680, max UDMA/133
[ 3.622242] ata2.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.625608] ata2.00: configured for UDMA/133
[ 3.944021] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.264021] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.330259] pata_amd 0000:00:06.0: version 0.3.10
[ 4.330300] pata_amd 0000:00:06.0: setting latency timer to 64
[ 4.330393] scsi4 : pata_amd
[ 4.330531] scsi5 : pata_amd
[ 4.331855] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 4.331858] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.500551] ata5.00: ATAPI: PHILIPS PBDV1640P, B3.7, max UDMA/33
[ 4.500574] ata5.01: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max UDMA/33
[ 4.500593] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
[ 4.500597] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc0c00000) ACPI=0x701f (60:60:0x15)
[ 4.520495] ata5.00: configured for UDMA/33
[ 4.532235] ata5.01: configured for UDMA/33
[ 4.536304] ata6: port disabled. ignoring.
[ 4.631820] Write protecting the kernel read-only data: 6564k
[ 5.733984] EXT4-fs: mounted filesystem with ordered data mode.

Revision history for this message
TJ (tj) wrote :

Can this bug be closed now - it looks as if the issue has gone away and was related to SATA AHCI NCQ?

Revision history for this message
TJ (tj) wrote :

Marking as a duplicate of bug #343919 since this appears to affect the same Nvidia AHCI controller with similar symptoms.

Revision history for this message
Gurubie (gurubie) wrote :

See https://bugs.launchpad.net/bugs/343919 for my SOLUTION. Fix, way to boot again and upgrade.

Revision history for this message
Gurubie (gurubie) wrote :

****WAIT!*****

Actually. since the title of this bug better *is* the problem I had I will post the solution here (to get the job done) and also in the ubuntu forums) so more can find it.

From my saved partition and chroot with Hardy 8.04 (you could use a live CD), this is how I fixed my Jaunty 9.04 fresh, beta install; where I could boot again. I look everywhere and tries everything. NONE of th buzybox commands worked for me. I do NOT have raid and their was no UUID or /dev naming error. Only the following worked for me and I still do not know why the newly installed kernal failed to boot after upgrading it. Perhaps it didn't upgrade or something because once I got back in using chroot, I had to run the apt-get fix command it recommends. Unless that was a limit of the chroot, I don't know. This was ugly and I almost gave up.

In a terminal (we're using sudo for root here)
Where "X" is your correct drive number, like /dev/sda2 for example

sudo mount /dev/sdaX /mnt

(You can cut and paste the commands below)

sudo mount --bind /dev /mnt/dev
sudo mount --bind /proc /mnt/proc
sudo mount --bind /sys /mnt/sys
sudo cp /etc/resolv.conf /mnt/etc/resolv.conf
sudo chroot /mnt /bin/bash

Then:

apt-get install ................................................etc.

I believe I did a:

apt-get update
(then the suggested fix command and...)

apt-get upgrade

While the kernel didn't appear to be different I not sure that it wasn't a newer fix. It booted. Now, after doing upgrades back in Jaunty again, I'm about to reboot and try the newest kernel (it just installed).

I hope this helps you as much as it did me!

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.