Webcam Eyetoy doesn't work

Bug #312472 reported by mjaime
16
This bug affects 2 people
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Expired
Undecided
Unassigned

Bug Description

I used a webcam Eyetoy in my computer for the chat using aMSN or Kopete without any problem,
I had Ubuntu Hardy Heron as operating system, but, when it was updated to the next released
Intrepid Ibex, the image appears in stripes, certainly, the drivers ov51x-jpeg were perfectly installed.
Thanks to everyone.

Revision history for this message
Michele Mangili (mangilimic) wrote :

Hello!

Could you please attach the following files to this report:

1) uname -a > uname-a.log
2) cat /proc/version_signature > proc_version_signature.log
3) sudo lspci -vvnn > lspci-vvnn.log (those are 2 v's not a w)
4) dmesg > dmesg.log
5) lsusb > lsusb.log

Can you also tell me if bug #262853 is related to your problem?

I'm moving this report to linux.

Thank you for reporting this issue and helping to make Ubuntu better!

Revision history for this message
mjaime (mjaime-ono) wrote :
Download full text (124.1 KiB)

Hello!
The files are the following ones

uname-a.log
Linux ajaime-desktop 2.6.27-11-generic #1 SMP Thu Jan 29 19:24:39 UTC 2009 i686 GNU/Linux

proc_version_signature.log
Ubuntu 2.6.27-11.27-generic

lspci-vvnn.log
Bus 005 Device 004: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 005 Device 003: ID 0ace:1215 ZyDAS WLA-54L WiFi
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 054c:0155 Sony Corp.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0458:002e KYE Systems Corp. (Mouse Systems)
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

dmesg.log
EP (Ethernet Emulation) ver 1.3
[ 29.739448] Bluetooth: BNEP filters: protocol multicast
[ 29.803447] Bluetooth: RFCOMM socket layer initialized
[ 29.803788] Bluetooth: RFCOMM TTY layer initialized
[ 29.803793] Bluetooth: RFCOMM ver 1.10
[ 29.836402] Bridge firewalling registered
[ 31.968245] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 31.968263] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode
[ 31.968328] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 32.009999] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 33.948756] eth0: link down
[ 33.949448] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.950453] firmware: requesting zd1211/zd1211b_ub
[ 34.093273] firmware: requesting zd1211/zd1211b_uphr
[ 34.298190] zd1211rw 5-3:1.0: firmware version 4725
[ 34.338049] zd1211rw 5-3:1.0: zd1211b chip 0ace:1215 v4810 high 00-1d-1a UW2453_RF pa0 -7---
[ 34.389418] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.632416] NET: Registered protocol family 17
[ 38.009061] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 44.009023] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 50.009037] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 56.009314] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 62.009065] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 68.009015] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 74.009049] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 80.009036] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 86.009040] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 91.661885] wlan0: authenticate with AP 00:22:15:00:0e:7d
[ 91.699073] wlan0: authenticated
[ 91.699082] wlan0: associate with AP 00:22:15:00:0e:7d
[ 91.702063] wlan0: RX AssocResp from 00:22:15:00:0e:7d (capab=0x411 status=0 aid=2)
[ 91.702068] wlan0: associated
[ 91.703004] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 92.009085] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 98.009042] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 102.072022] wlan0: no IPv6 routers present
[ 104.009215] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 110.009032] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 116.009020] ACPI: Unable to turn cooling device [f7411f18] 'on'
[ 122.009018] ACPI: Unable to t...

Revision history for this message
Michele Mangili (mangilimic) wrote :

Hello!

Thank you for providing all the requested file.

I've found the following link, which seems to explain how to set up the eyetoy drivers, maybe that could be a workaround for your issue!

http://wlug.org.nz/OmniVisionWebCam

Since this bug has enough information provided for a developer to begin work, I'm going to mark it as confirmed and let them handle it from here. Thanks for taking the time to make Ubuntu better!

Changed in linux:
status: Incomplete → Confirmed
Revision history for this message
penalvch (penalvch) wrote :

mjaime, thank you for reporting this and helping make Ubuntu better. This bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? Can you try with the latest development release of Ubuntu? ISO CD images are available from http://cdimage.ubuntu.com/releases/ .

If it remains an issue, could you run the following command from a Terminal (Applications->Accessories->Terminal). It will automatically gather and attach updated debug information to this report.

apport-collect -p linux <replace-with-bug-number>

Also, if you could test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the upstream kernel, please remove the 'needs-upstream-testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs-upstream-testing' text. Please let us know your results.

Thanks in advance.

tags: added: intrepid needs-upstream-testing regression-release
Changed in linux (Ubuntu):
status: Confirmed → Incomplete
Revision history for this message
Launchpad Janitor (janitor) wrote :

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]

Changed in linux (Ubuntu):
status: Incomplete → Expired
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.