Ubuntu
xserver-xorg-video-intel package

intel 855gm no SVIDEO

Bug #292795 reported by joerg jungermann
30
This bug affects 5 people
Affects Status Importance Assigned to Milestone
xserver-xorg-video-intel (Ubuntu)
Confirmed
Undecided
Unassigned

Bug Description

Binary package hint: xserver-xorg-video-intel

Hi,
I own an Toshiba Satellite SA50-532.
It has an Intel shared memory graphics card (lspci below). The laptop has a S-VIDEO output connector.

If I call xrandr from command line no output device TV is listed, regardless if S-VIDEO cable is connected or not
(xrandr output below).
No output is shown on the TV screen, as expected if no TV output is found.

I use the xorg.conf found below.

I hope all necessary information is provided. If not please ask.

# lsb_release -rd
Description: Ubuntu 8.10
Release: 8.10

# dpkg -l xserver-xorg-video-intel
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad)
||/ Name Version Description
+++-=========================-=========================-==================================================================
ii xserver-xorg-video-intel 2:2.4.1-1ubuntu10 X.Org X server -- Intel i8xx, i9xx display driver

# lspci -nvvv
00:00.0 0600: 8086:3580 (rev 02)
 Subsystem: 1179:0001
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Region 0: Memory at <unassigned> (32-bit, prefetchable)
 Capabilities: <access denied>
 Kernel driver in use: agpgart-intel
 Kernel modules: intel-agp

00:00.1 0880: 8086:3584 (rev 02)
 Subsystem: 1179:0001
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

00:00.3 0880: 8086:3585 (rev 02)
 Subsystem: 1179:0001
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0

00:02.0 0300: 8086:3582 (rev 02)
 Subsystem: 1179:0033
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 10
 Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
 Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
 Region 2: I/O ports at eff8 [size=8]
 Capabilities: <access denied>
 Kernel modules: intelfb

00:02.1 0380: 8086:3582 (rev 02)
 Subsystem: 1179:0033
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Region 0: Memory at 50000000 (32-bit, prefetchable) [size=128M]
 Region 1: Memory at 5c000000 (32-bit, non-prefetchable) [size=512K]
 Capabilities: <access denied>

00:1d.0 0c03: 8086:24c2 (rev 03)
 Subsystem: 1179:0001
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 10
 Region 4: I/O ports at 18c0 [size=32]
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1d.1 0c03: 8086:24c4 (rev 03)
 Subsystem: 1179:0001
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 11
 Region 4: I/O ports at 18e0 [size=32]
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1d.2 0c03: 8086:24c7 (rev 03)
 Subsystem: 1179:0001
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 11
 Region 4: I/O ports at 1c00 [size=32]
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1d.7 0c03: 8086:24cd (rev 03) (prog-if 20)
 Subsystem: 1179:0001
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 11
 Region 0: Memory at 5c080000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: <access denied>
 Kernel driver in use: ehci_hcd
 Kernel modules: ehci-hcd

00:1e.0 0604: 8086:2448 (rev 83)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
 Latency: 0
 Bus: primary=00, secondary=01, subordinate=03, sec-latency=64
 I/O behind bridge: 0000c000-0000cfff
 Memory behind bridge: cff00000-cfffffff
 Prefetchable memory behind bridge: 58000000-5bffffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:1f.0 0601: 8086:24cc (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Kernel modules: intel-rng, iTCO_wdt

00:1f.1 0101: 8086:24ca (rev 03) (prog-if 8a [Master SecP PriP])
 Subsystem: 1179:0001
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 11
 Region 0: I/O ports at 01f0 [size=8]
 Region 1: I/O ports at 03f4 [size=1]
 Region 2: I/O ports at 0170 [size=8]
 Region 3: I/O ports at 0374 [size=1]
 Region 4: I/O ports at bfa0 [size=16]
 Region 5: Memory at 5c080400 (32-bit, non-prefetchable) [size=1K]
 Kernel driver in use: ata_piix

00:1f.5 0401: 8086:24c5 (rev 03)
 Subsystem: 1179:0412
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 11
 Region 0: I/O ports at 1000 [size=256]
 Region 1: I/O ports at 1880 [size=64]
 Region 2: Memory at 5c080800 (32-bit, non-prefetchable) [size=512]
 Region 3: Memory at 5c080a00 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>
 Kernel driver in use: Intel ICH
 Kernel modules: snd-intel8x0

00:1f.6 0703: 8086:24c6 (rev 03)
 Subsystem: 1179:0001
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin B routed to IRQ 11
 Region 0: I/O ports at 1400 [size=256]
 Region 1: I/O ports at 1800 [size=128]
 Capabilities: <access denied>
 Kernel modules: snd-intel8x0m, 8250_pci

01:05.0 0200: 168c:0013 (rev 01)
 Subsystem: 144f:7057
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at cfff0000 (32-bit, non-prefetchable) [size=64K]
 Capabilities: <access denied>
 Kernel driver in use: ath_pci
 Kernel modules: ath_pci, ath5k

01:07.0 0c00: 104c:8026 (prog-if 10)
 Subsystem: 1179:0001
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at cff05000 (32-bit, non-prefetchable) [size=2K]
 Region 1: Memory at cff00000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: <access denied>
 Kernel modules: ohci1394

01:08.0 0200: 8086:103d (rev 83)
 Subsystem: 1179:0001
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at cffef000 (32-bit, non-prefetchable) [size=4K]
 Region 1: I/O ports at cf00 [size=64]
 Capabilities: <access denied>
 Kernel modules: e100

01:0b.0 0607: 1179:0617 (rev 33)
 Subsystem: 1179:0001
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at cff04000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=01, secondary=02, subordinate=02, sec-latency=0
 Memory window 0: 58000000-5bfff000 (prefetchable)
 Memory window 1: 60000000-63fff000
 I/O window 0: 0000c000-0000c0ff
 I/O window 1: 0000c400-0000c4ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001
 Kernel modules: yenta_socket

# cat /etc/X11/xorg.conf
Section "ServerLayout"
 Identifier "tft" #"default layout"
 Screen 0 "tft screen" 0 0
 InputDevice "mice" "CorePointer"
 InputDevice "kbd" "CoreKeyboard"
 InputDevice "touchpad"
EndSection

Section "Files"
 # RgbPath "/etc/X11/rgb"
 # ModulePath "/usr/lib/xorg/modules"
 FontPath "/usr/share/fonts/X11/misc"
 FontPath "/usr/share/fonts/X11/cyrillic"
 FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
 FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
 FontPath "/usr/share/fonts/X11/Type1"
 FontPath "/usr/share/fonts/X11/100dpi"
 FontPath "/usr/share/fonts/X11/75dpi"
 FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
 Load "dbe"
 Load "dri"
 Load "extmod"
 Load "GLcore"
 Load "glx"
 Load "record"
 Load "xtrap"
 Load "type1"
EndSection

Section "InputDevice"
 Identifier "kbd"
 Driver "kbd"
EndSection

Section "InputDevice"
 Identifier "mice"
 Driver "mouse"
 Option "Protocol" "auto"
 Option "Device" "/dev/input/mice"
 Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "InputDevice" # Identifier "touchpad" # {
 Identifier "touchpad"
 Driver "synaptics"
 Option "SendCoreEvents" "true"
 Option "Device" "/dev/psaux"
 Option "Protocol" "auto-dev"
 Option "HorizScrollDelta" "0"
EndSection

Section "Monitor"
 Identifier "tft monitor"
 VendorName "toshiba"
 ModelName "tft"
 Option "DPMS"
 Option "PreferredMode" "1024x768"
EndSection

Section "Monitor"
 Identifier "crt monitor"
 VendorName "(null)"
 ModelName "crt"
 HorizSync 28-96
    VertRefresh 43-160
 Option "DPMS"
EndSection

Section "Monitor"
 Identifier "tv monitor"
 VendorName "(null)"
 ModelName "tv"
 Option "DPMS"
 Option "PreferredMode" "800x600"
EndSection

Section "Device"
 Identifier "i855gm"
 Driver "intel"
 VendorName "Intel Corporation"
 BoardName "82852/855GM Integrated Graphics Device"
 Option "Monitor-LVDS" "tft monitor"
 Option "Monitor-VGA" "crt monitor"
 Option "Monitor-TV" "tv monitor"
EndSection

Section "Screen"
 Identifier "tft screen"
 Device "i855gm"
 Monitor "tft monitor"
 DefaultDepth 16
 SubSection "Display"
  Depth 16
  Virtual 2048 1600
 EndSubSection
EndSection

# xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 2048 x 1600
VGA connected (normal left inverted right x axis y axis)
   2048x1536 60.0
   1920x1440 60.0
   1856x1392 60.0
   1792x1344 60.0
   1600x1200 75.0 70.0 65.0 60.0
   1680x1050 84.9 74.9 69.9 60.0
   1600x1024 60.2
   1400x1050 85.0 74.8 70.0 60.0
   1280x1024 85.0 75.0 60.0
   1440x900 59.9
   1280x960 85.0 60.0
   1360x768 59.8
   1152x864 100.0 85.1 85.0 75.0 75.0 70.0 60.0
   1024x768 85.0 75.0 70.1 60.0
   832x624 74.6
   800x600 85.1 72.2 75.0 60.3 56.2
   640x480 85.0 72.8 75.0 59.9
   720x400 85.0
   640x400 85.1
   640x350 85.1
LVDS connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768 60.0*+ 85.0 75.0 70.1 60.0
   832x624 74.6
   800x600 85.1 72.2 75.0 60.3 56.2
   640x480 85.0 72.8 75.0 59.9
   720x400 85.0
   640x400 85.1
   640x350 85.1
TMDS disconnected (normal left inverted right x axis y axis)

Revision history for this message
Geir Ove Myhr (gomyhr) wrote :

Thank you for reporting this bug. Can you atttach the following?
- Output of lscpi -vvnn (not -vvvn, -vvnn is more human readable)
- /var/log/Xorg.0.log

The same goes for bug 292802...

Revision history for this message
joerg jungermann (joju-math) wrote :
Download full text (56.7 KiB)

Hi

here are requested information:

# lscpi -vvnn
00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02)
        Subsystem: Toshiba America Info Systems Device [1179:0001]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at <unassigned> (32-bit, prefetchable)
        Capabilities: [40] Vendor Specific Information <?>
        Kernel driver in use: agpgart-intel
        Kernel modules: intel-agp

00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02)
        Subsystem: Toshiba America Info Systems Device [1179:0001]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02)
        Subsystem: Toshiba America Info Systems Device [1179:0001]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
        Subsystem: Toshiba America Info Systems Device [1179:0033]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
        Region 1: Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
        Region 2: I/O ports at eff8 [size=8]
        Capabilities: [d0] Power Management version 1
                Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02)
        Subsystem: Toshiba America Info Systems Device [1179:0033]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at 50000000 (32-bit, prefetchable) [size=128M]
        Region 1: Memory at 5c000000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: [d0] Power Management version 1
                Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0...

Revision history for this message
Geir Ove Myhr (gomyhr) wrote :

Does it make a difference if you move away your xorg.conf? Most of what you have specified there should be autodetectable with the new versions of the driver.

Revision history for this message
joerg jungermann (joju-math) wrote :
Download full text (6.8 KiB)

I moved the xorg.conf aside. This makes no difference in the behavior, expcept that the default bit depth is now 24bit.

# cat /var/log/Xorg.0.log # if started with absent /etc/xorg.conf
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/phoenix.troja:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux phoenix.troja 2.6.27.4-pentiumm-phoenix #1 PREEMPT Thu Oct 30 12:54:41 CET 2008 i686
Build Date: 24 October 2008 08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (<email address hidden>)
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 3 14:22:04 2008
(EE) Unable to locate/open config file
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 4.1
        X.Org XInput driver : 2.1
        X.Org Server Extension : 1.1
        X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 3

(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xd8000000/0, 0xd0000000/0, I/O @ 0x0000eff8/0
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0x50000000/0, 0x5c000000/0
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Using default built-in configuration (48 lines)
(==) --- Start of built-in configuration ---
        Section "Device"
                Identifier "Builtin Default intel Device 0"
                Driver "intel"
        EndSection
        Section "Screen"
                Identifier "Builtin Default intel Screen 0"
                Device "Builtin Default intel Device 0"
        EndSection
        Section "Device"
                Identifier "Builtin Default intel Device 0"
                Driver "intel"
        EndSection
        Section "Screen"
                Identifier "Builtin Default intel Screen 0"
                Device "Builtin Default intel Device 0"
        EndSection
        Section "Device"
                Identifier "Builtin Default i810 Device 0"
                Driver "i810"
        EndSection
        Section "Screen"
                Identifier "Builtin Default i810 Screen 0"
                Device "Builtin Default i810 Device 0"
        EndSection
        Section "Device"
                Identifier "Builtin Default vesa Device 0"
                Driver "vesa"
        EndSection
        Section "Screen"
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x03123000 (pgoffset 12579)
(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x...

Read more...

Revision history for this message
Robert Garshaw (robert-garshaw) wrote :

I have the same problem with a HP nx9040. I read somewhere that tv out doesn't work with 855GM using the "intel" driver. It did work with the "i810" driver but it's not available with Ubuntu any more.

Revision history for this message
Launchpad Janitor (janitor) wrote :

Status changed to 'Confirmed' because the bug affects multiple users.

Changed in xserver-xorg-video-intel (Ubuntu):
status: New → Confirmed
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Related questions

Remote bug watches

Bug watches keep track of this bug in other bug trackers.