not recognize my intuix S810

[Akdo]

Hi , thanks fot this software, but it not recognize my tnt tunner.

On packet there are TNT / DVB-T

me-tv
Me TV-Message: 08.07.2008 21:44:18 - Me TV Version: 0.5.25
Me TV-Message: 08.07.2008 21:44:18 - Chargement du fichier glade '/usr/share/me-tv/glade/me-tv.glade' en cours
Me TV-Message: 08.07.2008 21:44:19 - Création du GEP dans '/home/xx/.me-tv/epg.xml'
Me TV-Message: 08.07.2008 21:44:19 - GEP chargé
Me TV-Message: message d'exception: 'Pas de tuner'
Me TV-Message: 08.07.2008 21:44:19 - Exception dans void Application::init() : Pas de tuner
Me TV-Message: 08.07.2008 21:44:21 - Arrêt normal de l'application

I have Ubuntu hardy last release + updates

lsusb

Bus 002 Device 004: ID 04ca:f001 Lite-On Technology Corp. <== My Intuix
Bus 002 Device 002: ID 05ca:1810 Ricoh Co., Ltd
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

dmesg
[ 2152.781235] usb 2-1: new high speed USB device using ehci_hcd and address 3
[ 2152.855739] usb 2-1: configuration #1 chosen from 1 choice
[ 2153.003853] dvb-usb: found a 'LITE-ON USB2.0 DVB-T Tuner' in cold state, will try to load a firmware
[ 2153.026691] dvb-usb: downloading firmware from file 'dvb-usb-dibusb-6.0.0.8.fw'
[ 2153.053332] usbcore: registered new interface driver dvb_usb_dibusb_mc
[ 2153.054640] usb 2-1: USB disconnect, address 3
[ 2153.055268] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
[ 2154.260509] usb 2-1: new high speed USB device using ehci_hcd and address 4
[ 2154.339015] usb 2-1: configuration #1 chosen from 1 choice
[ 2154.341125] dvb-usb: found a 'LITE-ON USB2.0 DVB-T Tuner' in warm state.
[ 2154.341426] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 2154.343323] DVB: registering new adapter (LITE-ON USB2.0 DVB-T Tuner)
[ 2154.345354] dvb-usb: no frontend was attached by 'LITE-ON USB2.0 DVB-T Tuner'
[ 2154.346189] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:0b.1/usb2/2-1/input/input10
[ 2154.376612] dvb-usb: schedule remote query interval to 150 msecs.
[ 2154.376621] dvb-usb: LITE-ON USB2.0 DVB-T Tuner successfully initialized and connected.

Thanks for help.

[Michael Lamothe (lamothe-deactivatedaccount-deactivatedaccount)]

Can you please `ls /dev/dvb/adapters0` for me?

[Michael Lamothe (lamothe-deactivatedaccount-deactivatedaccount)]

[ 2154.345354] dvb-usb: no frontend was attached by 'LITE-ON USB2.0 DVB-T Tuner'

Actually, I think that this line tells us what we need to know. Do you have any other DVB software working?

[Akdo (menoft)]

I haven't /dev/dvb folder.

I haven't other dvb software running !

[Michael Lamothe (lamothe-deactivatedaccount-deactivatedaccount)]

Then your issue is not with Me TV which requires you to have a working DVB setup. From my understanding, if the driver has loaded correctly then you should have a /dev/dvb directory.

[Michael Lamothe (lamothe-deactivatedaccount-deactivatedaccount)]

No answer. Setting to invalid.

[Akdo (menoft)]

Hi, I resolv problem, i must delete .me-tv folder to launch configuration wizzard because it isn't reconfigure after my firt test ( I have forgoten plug my Intuix ).

But sometimes it not working and not detect all channel. Why we can't launch configuration tool ?

Thank you for your help :

me-tv
Me TV-Message: 30.07.2008 01:09:53 - Me TV Version: 0.5.17
Me TV-Message: 30.07.2008 01:09:53 - Chargement du fichier glade '/usr/share/me-tv/glade/me-tv.glade' en cours
Me TV-Message: 30.07.2008 01:09:53 - Création du GEP dans '/home/xxx/.me-tv/epg.xml'
Me TV-Message: 30.07.2008 01:09:53 - GEP chargé
initial transponder 602000000 0 9 9 3 1 4 0
initial transponder 474000000 0 9 9 3 1 4 0
initial transponder 498000000 0 9 9 3 1 4 0
initial transponder 554000000 0 9 9 3 1 4 0
initial transponder 522000000 0 9 9 3 1 4 0
initial transponder 578000000 0 9 9 3 1 4 0
>>> tune to:
WARNING: >>> tuning failed!!!
>>> tune to: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
WARNING: >>> tuning failed!!!
>>> tune to: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
WARNING: >>> tuning failed!!!
>>> tune to: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
WARNING: >>> tuning failed!!!
>>> tune to: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
WARNING: >>> tuning failed!!!
>>> tune to: (tuning failed)
WARNING: >>> tuning failed!!!
>>> tune to:
WARNING: >>> tuning failed!!!
>>> tune to: (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Me TV-Message: 30.07.2008 01:10:38 - Done.
Me TV-Message: 30.07.2008 01:10:38 - Fichier de chaînes chargé

(me-tv:19479): Me TV-CRITICAL **: message d'exception: 'Il n'y a pas de chaînes utilisables dans le fichier channels.conf.'
Me TV-Message: 30.07.2008 01:10:38 - Exception dans void Application::init() : Il n'y a pas de chaînes utilisables dans le fichier channels.conf.
Me TV-Message: 30.07.2008 01:10:41 - Arrêt normal de l'application

and when i launch program again there aren't channel , and i cant re-launch scanning channel...help !

[Michael Lamothe (lamothe-deactivatedaccount-deactivatedaccount)]

Please do not begin discussing another bug, create a new one. This bug is closed.