after upgrade (8.04): /usr/bin/wodim: A write error occured.

[Thomas Janssen]

Binary package hint: wodim

I can't burn neither audio, nor data cd's.
The Error-Mesage is:
System
-----------------------
K3b Version: 1.0.4

KDE Version: 3.5.9
QT Version: 3.3.8b
Kernel: 2.6.24-19-generic
Devices
-----------------------
TSSTcorp CD/DVDW TS-H552U US06 (/dev/scd0, /dev/sg0) [CD-R, CD-RW, CD-Rom, DVD-Rom, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R doppelschichtig] [DVD-Rom, DVD-R Sequentiell, DVD-RW Eingeschränktes Überbrennen, DVD-RW Sequentiell, DVD+RW, DVD+R, Zweischichtige DVD+R, CD-Rom, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben]

K3bIsoImager
-----------------------
mkisofs print size result: 304346 (623300608 bytes)
Pipe throughput: 433748736 bytes read, 433744384 bytes written.

Used versions
-----------------------
mkisofs: 1.1.6
cdrecord: 1.1.6

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'TSSTcorp'
Identification : 'CD/DVDW TS-H552U'
Revision : 'US06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1968384 = 1922 KB
FIFO size : 12582912 = 12288 KB
Track 01: data 594 MB
Total size: 682 MB (67:37.97) = 304348 sectors
Lout start: 683 MB (67:39/73) = 304348 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in: -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 55501
Starting to write CD/DVD at speed 40.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
Speed set to 7056 KB/s
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 594 MB written.
Track 01: 1 of 594 MB written (fifo 99%) [buf 75%] 43.4x.
Track 01: 2 of 594 MB written (fifo 100%) [buf 100%] 2.6x.
Track 01: 3 of 594 MB written (fifo 100%) [buf 100%] 21.4x.
Track 01: 4 of 594 MB written (fifo 100%) [buf 100%] 20.8x.
...
...
Track 01: 401 of 594 MB written (fifo 99%) [buf 100%] 39.4x.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 03 23 D2 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.017s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 421433344 bytes
Writing time: 108.654s
Average write speed 40.1x.
Min drive buffer fill was 97%
Fixating...
Errno: 5 (Input/output error), close track/session scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 72 01 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x72 Qual 0x01 (session fixation error writing lead-in) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 2.413s timeout 480s
cmd finished after 2.413s timeout 480s
/usr/bin/wodim: Cannot fixate disk.
Fixating time: 2.415s
/usr/bin/wodim: fifo had 6830 puts and 6639 gets.
/usr/bin/wodim: fifo was 0 times empty and 4547 times full, min fill was 91%.
BURN-Free was never needed.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=40 -tao driveropts=burnfree -eject -overburn -multi -xa -tsize=304346s -

mkisofs
-----------------------
304346
I: -input-charset not specified, using utf-8 (detected in locale settings)
  0.17% done, estimate finish Sun Jul 6 19:31:41 2008
...
...
 69.50% done, estimate finish Sun Jul 6 19:34:13 2008

mkisofs calculate size command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid Dokumente_mit_Schloss -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-thomas/k3b8rw51a.tmp -rational-rock -hide-list /tmp/kde-thomas/k3btRPdgc.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-thomas/k3bl5fSEa.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-thomas/k3bOTLboc.tmp

mkisofs command:
-----------------------
/usr/bin/genisoimage -gui -graft-points -volid Dokumente_mit_Schloss -volset -appid K3B THE CD KREATOR (C) 1998-2006 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-thomas/k3bLifJfa.tmp -rational-rock -hide-list /tmp/kde-thomas/k3biKzjha.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-thomas/k3bEMc9Nb.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-thomas/k3bH5IJkb.tmp