opening a webcam-stream with xawtv
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Invalid
|
Medium
|
Unassigned |
Bug Description
uname -a
#######
bloody-
Linux bloody-
#######
xawtv
#######
bloody-
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.24-16-generic)
xinerama 0: 1600x1200+0+0
X Error of failed request: XF86DGANoDirect
Major opcode of failed request: 137 (XFree86-DGA)
Minor opcode of failed request: 1 (XF86DGAGetVideoLL)
Serial number of failed request: 13
Current serial number in output stream: 13
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: Message too long
v4l2: open /dev/video0: Message too long
v4l: open /dev/video0: Message too long
no video grabber device available
#######
lsusb
#######
bloody-
Bus 004 Device 004: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External)
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 046d:c512 Logitech, Inc.
Bus 001 Device 003: ID 05a9:a518 OmniVision Technologies, Inc. ###Terracam USB Pro
Bus 001 Device 001: ID 0000:0000
#######
dmesg
#######
[ 14.544892] system 00:00: iomem range 0xfec00000-
[ 14.544895] system 00:00: iomem range 0xfee00000-
[ 14.544902] system 00:02: ioport range 0xe400-0xe47f has been reserved
[ 14.544905] system 00:02: ioport range 0xe800-0xe81f could not be reserved
[ 14.544909] system 00:02: iomem range 0xfff80000-
[ 14.544912] system 00:02: iomem range 0xffb80000-
[ 14.544918] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 14.544930] system 00:0d: ioport range 0x290-0x297 has been reserved
[ 14.544933] system 00:0d: ioport range 0x370-0x375 has been reserved
[ 14.575377] PCI: Bridge: 0000:00:01.0
[ 14.575379] IO window: disabled.
[ 14.575385] MEM window: ee000000-efefffff
[ 14.575388] PREFETCH window: eff00000-f7ffffff
[ 14.575407] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 14.575422] NET: Registered protocol family 2
[ 14.612917] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 14.613186] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 14.613430] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 14.613670] TCP: Hash tables configured (established 16384 bind 16384)
[ 14.613673] TCP reno registered
[ 14.624940] checking if image is initramfs... it is
[ 15.076564] Switched to high resolution mode on CPU 0
[ 15.309192] Freeing initrd memory: 7707k freed
[ 15.309426] Simple Boot Flag at 0x3a set to 0x1
[ 15.310104] audit: initializing netlink socket (disabled)
[ 15.310125] audit(121086966
[ 15.312475] VFS: Disk quotas dquot_6.5.1
[ 15.312566] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 15.312729] io scheduler noop registered
[ 15.312732] io scheduler anticipatory registered
[ 15.312734] io scheduler deadline registered
[ 15.312746] io scheduler cfq registered (default)
[ 15.312760] PCI: VIA PCI bridge detected. Disabling DAC.
[ 15.312821] Boot video device is 0000:01:00.0
[ 15.313157] isapnp: Scanning for PnP cards...
[ 15.666543] isapnp: No Plug & Play device found
[ 15.701168] Real Time Clock Driver v1.12ac
[ 15.701293] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 15.701419] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 15.702131] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 15.703069] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 15.703157] input: Macintosh mouse button emulation as /devices/
[ 15.703337] PNP: No PS/2 controller found. Probing ports directly.
[ 15.705767] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 15.705773] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 15.712308] mice: PS/2 mouse device common for all mice
[ 15.712451] EISA: Probing bus 0 at eisa.0
[ 15.712485] EISA: Detected 0 cards.
[ 15.712490] cpuidle: using governor ladder
[ 15.712492] cpuidle: using governor menu
[ 15.712662] NET: Registered protocol family 1
[ 15.712694] Using IPI No-Shortcut mode
[ 15.712738] registered taskstats version 1
[ 15.712844] Magic number: 8:948:691
[ 15.713086] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 15.713088] EDD information not available.
[ 15.713627] Freeing unused kernel memory: 364k freed
[ 16.960116] fuse init (API version 7.9)
[ 17.575662] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 16
[ 17.628484] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[ed800000-
[ 17.679395] usbcore: registered new interface driver usbfs
[ 17.679427] usbcore: registered new interface driver hub
[ 17.683806] usbcore: registered new device driver usb
[ 17.697357] USB Universal Host Controller Interface driver v3.0
[ 17.740346] SCSI subsystem initialized
[ 17.767038] via-rhine.
[ 17.798542] libata version 3.00 loaded.
[ 17.815010] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
[ 17.815030] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 17.815390] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 17.815426] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000b800
[ 17.815609] usb usb1: configuration #1 chosen from 1 choice
[ 17.815637] hub 1-0:1.0: USB hub found
[ 17.815645] hub 1-0:1.0: 2 ports detected
[ 17.917101] Floppy drive(s): fd0 is 1.44M
[ 17.919027] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 17
[ 17.919042] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 17.919073] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 17.919096] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000b400
[ 17.919232] usb usb2: configuration #1 chosen from 1 choice
[ 17.919260] hub 2-0:1.0: USB hub found
[ 17.919268] hub 2-0:1.0: 2 ports detected
[ 17.934739] FDC 0 is a post-1991 82077
[ 18.023012] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 17
[ 18.023031] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 18.023066] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 18.023091] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000b000
[ 18.023232] usb usb3: configuration #1 chosen from 1 choice
[ 18.023259] hub 3-0:1.0: USB hub found
[ 18.023267] hub 3-0:1.0: 2 ports detected
[ 18.127176] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 17
[ 18.127197] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 18.127235] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 18.127285] ehci_hcd 0000:00:10.3: irq 17, io mem 0xec000000
[ 18.158814] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 18.170772] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 18.170927] usb usb4: configuration #1 chosen from 1 choice
[ 18.170962] hub 4-0:1.0: USB hub found
[ 18.170972] hub 4-0:1.0: 6 ports detected
[ 18.275087] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 18.275375] eth0: VIA Rhine II at 0xeb800000, 00:11:2f:cb:11:03, IRQ 18.
[ 18.276085] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 18.280999] pata_via 0000:00:11.1: version 0.3.3
[ 18.281042] ACPI: Unable to derive IRQ for device 0000:00:11.1
[ 18.282417] scsi0 : pata_via
[ 18.283211] scsi1 : pata_via
[ 18.283780] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa800 irq 14
[ 18.283784] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa808 irq 15
[ 18.455003] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-08, max UDMA/133
[ 18.455009] ata1.00: 78242976 sectors, multi 16: LBA48
[ 18.455144] ata1.01: ATA-7: SAMSUNG SP0802N, TK100-23, max UDMA/100
[ 18.455148] ata1.01: 156368016 sectors, multi 16: LBA48
[ 18.462828] ata1.00: configured for UDMA/133
[ 18.470822] ata1.01: configured for UDMA/100
[ 19.086308] ieee1394: Host added: ID:BUS[0-00:1023] GUID[2000000003
[ 19.122496] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max UDMA/33
[ 19.122517] ata2.01: ATAPI: LITE-ON LTR-52327S, QS09, max UDMA/33
[ 19.294260] ata2.00: configured for UDMA/33
[ 19.466157] ata2.01: configured for UDMA/33
[ 19.466312] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5
[ 19.466781] scsi 0:0:1:0: Direct-Access ATA SAMSUNG SP0802N TK10 PQ: 0 ANSI: 5
[ 19.476181] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0015 PQ: 0 ANSI: 5
[ 19.477017] scsi 1:0:1:0: CD-ROM LITE-ON LTR-52327S QS09 PQ: 0 ANSI: 5
[ 19.491143] Driver 'sd' needs updating - please use bus_type methods
[ 19.491270] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 19.491287] sd 0:0:0:0: [sda] Write Protect is off
[ 19.491290] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.491312] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.491373] sd 0:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
[ 19.491384] sd 0:0:0:0: [sda] Write Protect is off
[ 19.491387] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 19.491404] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.491409] sda: sda1
[ 19.494127] sd 0:0:0:0: [sda] Attached SCSI disk
[ 19.494218] sd 0:0:1:0: [sdb] 156368016 512-byte hardware sectors (80060 MB)
[ 19.494235] sd 0:0:1:0: [sdb] Write Protect is off
[ 19.494238] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 19.494258] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.494312] sd 0:0:1:0: [sdb] 156368016 512-byte hardware sectors (80060 MB)
[ 19.494323] sd 0:0:1:0: [sdb] Write Protect is off
[ 19.494326] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 19.494343] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 19.494348] sdb: sdb1 sdb2 sdb3 sdb4
[ 19.502776] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 19.503484] Driver 'sr' needs updating - please use bus_type methods
[ 19.512961] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.512986] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 19.513008] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 19.513029] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 19.521951] sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
[ 19.521961] Uniform CD-ROM driver Revision: 3.20
[ 19.522042] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 19.529937] usb 4-5: new high speed USB device using ehci_hcd and address 4
[ 19.529959] sr1: scsi3-mmc drive: 3x/52x writer cd/rw xa/form2 cdda tray
[ 19.530035] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 19.664449] usb 4-5: configuration #1 chosen from 1 choice
[ 19.902348] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 19.988678] Attempting manual resume
[ 19.988684] swsusp: Resume From Partition 8:17
[ 19.988686] PM: Checking swsusp image.
[ 19.988892] PM: Resume from disk failed.
[ 20.018243] kjournald starting. Commit interval 5 seconds
[ 20.018261] EXT3-fs: mounted filesystem with ordered data mode.
[ 20.103831] usb 1-1: configuration #1 chosen from 1 choice
[ 20.345447] usb 1-2: new low speed USB device using uhci_hcd and address 4
[ 20.522516] usb 1-2: configuration #1 chosen from 1 choice
[ 20.525594] usbcore: registered new interface driver libusual
[ 20.815315] Initializing USB Mass Storage driver...
[ 20.815414] scsi2 : SCSI emulation for USB Mass Storage devices
[ 20.815507] usbcore: registered new interface driver usb-storage
[ 20.815511] USB Mass Storage support registered.
[ 20.815739] usb-storage: device found at 4
[ 20.815741] usb-storage: waiting for device to settle before scanning
[ 25.810462] usb-storage: device scan complete
[ 25.811076] scsi 2:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 25.811558] scsi 2:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 25.812053] scsi 2:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 25.812552] scsi 2:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 25.813961] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 25.813999] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 25.815078] sd 2:0:0:1: [sdd] Attached SCSI removable disk
[ 25.815106] sd 2:0:0:1: Attached scsi generic sg5 type 0
[ 25.816196] sd 2:0:0:2: [sde] Attached SCSI removable disk
[ 25.816232] sd 2:0:0:2: Attached scsi generic sg6 type 0
[ 25.817323] sd 2:0:0:3: [sdf] Attached SCSI removable disk
[ 25.817376] sd 2:0:0:3: Attached scsi generic sg7 type 0
[ 27.202317] Linux agpgart interface v0.102
[ 27.265921] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 27.270202] agpgart: AGP aperture is 64M @ 0xf8000000
[ 27.333649] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 27.393689] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.765898] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 27.929557] input: Power Button (FF) as /devices/
[ 27.941016] ACPI: Power Button (FF) [PWRF]
[ 27.941146] input: Power Button (CM) as /devices/
[ 27.957022] ACPI: Power Button (CM) [PWRB]
[ 29.248467] nvidia: module license 'NVIDIA' taints kernel.
[ 30.059807] Linux video capture interface: v2.00
[ 30.211766] usbcore: registered new interface driver hiddev
[ 30.225264] input: Logitech USB Receiver as /devices/
[ 30.239724] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.0-2
[ 30.264141] /build/
[ 30.265923] /build/
[ 30.270403] input: Logitech USB Receiver as /devices/
[ 30.277892] /build/
[ 30.295714] input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2
[ 30.295742] usbcore: registered new interface driver usbhid
[ 30.295748] /build/
[ 30.679584] /build/
[ 30.721595] irda_init()
[ 30.721625] NET: Registered protocol family 23
[ 30.840624] input: PC Speaker as /devices/
[ 31.048373] /build/
[ 31.048429] usbcore: registered new interface driver ov511
[ 31.048434] /build/
[ 31.054656] usbcore: registered new interface driver snd-usb-audio
[ 31.252918] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 32.018697] parport_pc 00:0b: reported by Plug and Play ACPI
[ 32.018744] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,
[ 32.180625] NET: Registered protocol family 10
[ 32.180871] lo: Disabled Privacy Extensions
[ 33.443673] p54: LM86 firmware
[ 33.443679] p54: FW rev 2.7.0.0 - Softmac protocol 4.1
[ 34.365955] phy0: Selected rate control algorithm 'simple'
[ 34.459370] phy0: hwaddr 00:30:f1:d8:d4:e8, isl3890
[ 34.465210] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 34.467803] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 34.468435] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 35.271079] lp0: using parport0 (interrupt-driven).
[ 35.360191] Adding 2048248k swap on /dev/sdb1. Priority:-1 extents:1 across:2048248k
[ 35.916183] EXT3 FS on sdb3, internal journal
[ 36.764757] kjournald starting. Commit interval 5 seconds
[ 36.764922] EXT3 FS on sdb4, internal journal
[ 36.764929] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.415006] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 37.882236] No dock devices found.
[ 39.017020] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 39.017028] apm: overridden by ACPI.
[ 39.123426] ppdev: user-space parallel port driver
[ 39.232427] audit(121086969
[ 40.140302] /build/
[ 40.890880] ADDRCONF(
[ 40.959941] Bluetooth: Core ver 2.11
[ 40.961427] NET: Registered protocol family 31
[ 40.961433] Bluetooth: HCI device and connection manager initialized
[ 40.961439] Bluetooth: HCI socket layer initialized
[ 41.017206] Bluetooth: L2CAP ver 2.9
[ 41.017214] Bluetooth: L2CAP socket layer initialized
[ 41.061636] Bluetooth: RFCOMM socket layer initialized
[ 41.061661] Bluetooth: RFCOMM TTY layer initialized
[ 41.061663] Bluetooth: RFCOMM ver 1.8
[ 42.828283] eth0: no IPv6 routers present
[ 43.110019] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 43.110037] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 43.110089] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 78.201362] NET: Registered protocol family 17
[ 78.409659] UDF-fs: No VRS found
[ 78.419675] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 78.420060] ISOFS: changing to secondary root
[ 844.830698] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 854.828869] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 980.751108] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 986.747599] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 1047.547293] kjournald starting. Commit interval 5 seconds
[ 1047.552160] EXT3 FS on sda1, internal journal
[ 1047.552177] EXT3-fs: mounted filesystem with ordered data mode.
[ 1228.605989] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 1262.586099] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 1380.517039] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 1598.389529] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 1652.357866] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 1712.326750] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 1836.250207] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 2026.139045] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 2409.918290] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 2621.790228] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 2639.783692] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 3443.313200] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 3527.264043] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 3569.794137] sd 2:0:0:0: [sdc] 8105984 512-byte hardware sectors (4150 MB)
[ 3569.795656] sd 2:0:0:0: [sdc] Write Protect is off
[ 3569.795661] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 3569.795664] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 3569.796876] sd 2:0:0:0: [sdc] 8105984 512-byte hardware sectors (4150 MB)
[ 3569.797876] sd 2:0:0:0: [sdc] Write Protect is off
[ 3569.797880] sd 2:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 3569.797882] sd 2:0:0:0: [sdc] Assuming drive cache: write through
[ 3569.797887] sdc: sdc1
[ 3582.151905] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 3582.285360] sd 2:0:0:0: [sdc] Result: hostbyte=DID_ERROR driverbyte=
[ 3582.285374] end_request: I/O error, dev sdc, sector 9152
[ 3913.034173] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 3996.985008] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 4340.787700] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 4482.700612] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 4650.602294] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 4870.473545] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 4938.433759] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 5200.280438] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 5352.195486] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 5444.141645] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 5606.042855] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 6006.056480] evolution[6989]: segfault at 6f682f7e eip b61da9a5 esp bfa928c0 error 4
[ 7626.863590] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 7664.841353] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 8136.561142] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[ 8918.107519] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[10072.427628] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[10398.240874] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[10552.146738] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[10566.138545] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[11475.610018] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[12011.296413] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[12930.757992] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[13608.361237] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[14667.736921] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[14847.631587] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[15159.453038] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[15447.284480] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[15691.137695] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[15905.012452] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[16068.920518] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[16080.684932] xchat[9019]: segfault at 00000000 eip b72d5b45 esp bfa1ec90 error 4
[16170.864776] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[16402.721024] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[16424.708146] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[16602.603984] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[16806.484702] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[16912.426601] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[16974.891052] ovcamchip: no version for "struct_module" found: kernel tainted.
[16974.891064] ovcamchip: no version magic, tainting kernel.
[16974.893136] ovcamchip: v2.27 for Linux 2.6 : OV camera chip I2C driver
[17097.608646] /build/
[17097.785510] /build/
[17170.534534] /build/
[17170.713396] /build/
[17170.894258] /build/
[17180.269735] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[17255.462189] /build/
[17255.643050] /build/
[17255.819913] /build/
[17259.172335] /build/
[17259.353196] /build/
[17259.535054] /build/
[17276.075328] /build/
[17276.254189] /build/
[17276.434053] /build/
[17391.460546] /build/
[17402.420115] /build/
[17470.100039] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[17591.845364] /build/
[17592.027221] /build/
[17592.212079] /build/
[17920.066111] usbcore: deregistering interface driver ov511
[17920.067860] /build/
[17945.090104] /build/
[17945.091689] /build/
[17945.103785] /build/
[17945.502244] /build/
[17945.853043] /build/
[17945.853084] usbcore: registered new interface driver ov511
[17945.853090] /build/
[17945.859474] /build/
[17946.207702] /build/
[17956.650668] /build/
[17956.835527] /build/
[17957.019385] /build/
[18063.752435] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[18130.709019] /build/
[18130.709024]
[18142.038648] /build/
[18147.349938] /build/
[18147.545790] /build/
[18147.740641] /build/
[18207.362763] /build/
[18207.548624] /build/
[18279.630160] /build/
[18363.572967] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[18512.604741] /build/
[18516.645793] /build/
[18671.111939] /build/
[18671.306794] /build/
[18671.505639] /build/
[18803.319391] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[18927.246830] usb 4-5: reset high speed USB device using ehci_hcd and address 4
[19263.365242] /build/
[19263.561092] /build/
[19263.755941] /build/
[19341.548083] /build/
[19341.761922] /build/
[19341.963763] /build/
[19372.985837] usb 4-5: reset high speed USB device using ehci_hcd and address 4
#######
lspci
#######
bloody-
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0a.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:0c.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
00:0d.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
00:0e.0 Communication controller: Conexant HSF 56k Data/Fax/Voice Modem (rev 01)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
#######
Changed in linux (Ubuntu): | |
importance: | Undecided → Medium |
status: | Incomplete → Confirmed |
FWIW I see this too, on several machines. One of which: 2.6.20- 16-server 2.6.20-16.35
- ASUS P3B-F (Intel 440BX chipset)
- Hardy i386
- linux-headers-
- ov51x-jpeg-source 1.5.6-1
- the camera is a Triplex Mini Taco (OV518+, OV7620)
(The other two machines are debian boxen with hand-rolled vanilla 2.6.24.2 kernels, one of which is amd64 with nvidia MCP51 hardware, the other with VT82xxxxx hardware)