USB mouse not detected

[ChristopherCmolik]

I use a usb optical mouse, with Breezy preview release. Sometimes, hotplug
won't detect my mouse correctly, so when I get to the GDM screen, my mouse
doesn't work. If i switch to a virtual console, login, and do 'sudo
/etc/init.d/hotplug stop' and then 'sudo /etc/init.d/hotplug start' it gets
detected correctly. Sometimes, though, when I do 'sudo /etc/init.d/hotplug
stop' my box hangs, that is I cant switch consoles ore anything. Is there a fix
for this?

DMESG follows:

[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.708000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.709000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.725000] Memory: 510372k/523520k available (1415k kernel code, 12648k
reserved, 763k data, 224k init, 0k highmem)
[4294668.725000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[4294668.725000] Calibrating delay loop... 3948.54 BogoMIPS (lpj=1974272)
[4294668.747000] Security Framework v1.0.0 initialized
[4294668.747000] SELinux: Disabled at boot.
[4294668.747000] Mount-cache hash table entries: 512
[4294668.747000] CPU: After generic identify, caps: 3febfbff 00000000 00000000
00000000 00000000 00000000 00000000
[4294668.747000] CPU: After vendor identify, caps: 3febfbff 00000000 00000000
00000000 00000000 00000000 00000000
[4294668.747000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294668.747000] CPU: L2 cache: 512K
[4294668.747000] CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080
00000000 00000000 00000000
[4294668.747000] CPU: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
[4294668.747000] Enabling fast FPU save and restore... done.
[4294668.747000] Enabling unmasked SIMD FPU exception support... done.
[4294668.747000] Checking 'hlt' instruction... OK.
[4294668.751000] Checking for popad bug... OK.
[4294668.751000] checking if image is initramfs... it is
[4294669.344000] Freeing initrd memory: 5086k freed
[4294669.344000] ACPI: Looking for DSDT in initrd... not found!
[4294669.393000] not found!
[4294669.403000] ENABLING IO-APIC IRQs
[4294669.403000] ..TIMER: vector=0x31 pin1=2 pin2=-1
[4294669.515000] NET: Registered protocol family 16
[4294669.515000] EISA bus registered
[4294669.515000] ACPI: bus type pci registered
[4294669.515000] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[4294669.515000] PCI: Using configuration type 1
[4294669.515000] mtrr: v2.0 (20020519)
[4294669.516000] ACPI: Subsystem revision 20050729
[4294669.525000] ACPI: Interpreter enabled
[4294669.525000] ACPI: Using IOAPIC for interrupt routing
[4294669.526000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.526000] PCI: Probing PCI hardware (bus 00)
[4294669.526000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294669.528000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294669.529000] Boot video device is 0000:01:00.0
[4294669.529000] PCI: Transparent bridge - 0000:00:1e.0
[4294669.531000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.531000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[4294669.533000] ACPI: Power Resource [URP1] (off)
[4294669.533000] ACPI: Power Resource [FDDP] (off)
[4294669.534000] ACPI: Power Resource [LPTP] (off)
[4294669.537000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[4294669.538000] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[4294669.539000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[4294669.540000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[4294669.540000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14
15) *0, disabled.
[4294669.541000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[4294669.541000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[4294669.542000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[4294669.542000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.542000] pnp: PnP ACPI init
[4294669.548000] pnp: PnP ACPI: found 12 devices
[4294669.548000] PnPBIOS: Disabled by ACPI PNP
[4294669.548000] PCI: Using ACPI for IRQ routing
[4294669.548000] PCI: If a device doesn't work, try "pci=routeirq". If it
helps, post a report
[4294669.555000] pnp: 00:0a: ioport range 0x400-0x47f could not be reserved
[4294669.555000] pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
[4294669.555000] pnp: 00:0a: ioport range 0x480-0x4bf has been reserved
[4294669.556000] audit: initializing netlink socket (disabled)
[4294669.556000] audit: initialized
[4294669.556000] VFS: Disk quotas dquot_6.5.1
[4294669.556000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.556000] devfs: 2004-01-31 Richard Gooch (<email address hidden>)
[4294669.556000] devfs: boot_options: 0x0
[4294669.556000] Initializing Cryptographic API
[4294669.556000] isapnp: Scanning for PnP cards...
[4294669.910000] isapnp: No Plug & Play device found
[4294669.931000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
[4294669.931000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
[4294669.934000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294669.934000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294669.934000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ
sharing enabled
[4294669.934000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.936000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294669.937000] io scheduler noop registered
[4294669.937000] io scheduler anticipatory registered
[4294669.937000] io scheduler deadline registered
[4294669.937000] io scheduler cfq registered
[4294669.937000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize
[4294669.938000] EISA: Probing bus 0 at eisa.0
[4294669.938000] EISA: Detected 0 cards.
[4294669.938000] NET: Registered protocol family 2
[4294669.948000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294669.948000] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[4294669.948000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294669.948000] TCP: Hash tables configured (established 32768 bind 32768)
[4294669.948000] NET: Registered protocol family 8
[4294669.948000] NET: Registered protocol family 20
[4294669.949000] ACPI wakeup devices:
[4294669.949000] P0P1 UAR1 PS2K USB0 USB1 USB2 USB3 AC97 SLPB
[4294669.949000] ACPI: (supports S0 S1 S3 S4 S5)
[4294669.949000] Freeing unused kernel memory: 224k freed
[4294669.991000] Capability LSM initialized
[4294670.008000] NET: Registered protocol family 1
[4294670.026000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.026000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[4294670.026000] ACPI: bus type ide registered
[4294670.034000] ICH4: IDE controller at PCI slot 0000:00:1f.1
[4294670.034000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[4294670.034000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) ->
IRQ 18
[4294670.034000] ICH4: chipset revision 1
[4294670.034000] ICH4: not 100% native mode: will probe irqs later
[4294670.034000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
[4294670.034000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[4294670.034000] Probing IDE interface ide0...
[4294670.123000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294670.298000] hda: WDC WD800BB-75CAA0, ATA DISK drive
[4294670.910000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294670.911000] Probing IDE interface ide1...
[4294671.582000] hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
[4294672.296000] hdd: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
[4294672.347000] ide1 at 0x170-0x177,0x376 on irq 15
[4294672.347000] Probing IDE interface ide2...
[4294672.860000] Probing IDE interface ide3...
[4294673.508000] Probing IDE interface ide4...
[4294674.020000] Probing IDE interface ide5...
[4294674.536000] hda: max request size: 128KiB
[4294674.554000] hda: Host Protected Area detected.
[4294674.554000] current capacity is 156250000 sectors (80000 MB)
[4294674.554000] native capacity is 156301488 sectors (80026 MB)
[4294674.556000] hda: Host Protected Area disabled.
[4294674.556000] hda: 156301488 sectors (80026 MB) w/2048KiB Cache,
CHS=65535/16/63, UDMA(100)
[4294674.556000] hda: cache flushes not supported
[4294674.556000] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > p3 p4
[4294674.615000] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
[4294674.616000] Uniform CD-ROM driver Revision: 3.20
[4294674.617000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
[4294675.118000] Attempting manual resume
[4294675.119000] swsusp: Suspend partition has wrong signature?
[4294675.148000] usbcore: registered new driver usbfs
[4294675.148000] usbcore: registered new driver hub
[4294675.149000] USB Universal Host Controller Interface driver v2.2
[4294675.149000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) ->
IRQ 16
[4294675.149000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294675.149000] uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
[4294675.211000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[4294675.212000] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e800
[4294675.212000] hub 1-0:1.0: USB hub found
[4294675.212000] hub 1-0:1.0: 2 ports detected
[4294675.215000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 19
[4294675.215000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294675.215000] uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
[4294679.055000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[4294679.055000] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e880
[4294679.055000] hub 2-0:1.0: USB hub found
[4294679.055000] hub 2-0:1.0: 2 ports detected
[4294679.138000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[4294679.138000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294679.138000] uhci_hcd 0000:00:1d.2: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
[4294682.991000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[4294682.991000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ec00
[4294682.991000] hub 3-0:1.0: USB hub found
[4294682.991000] hub 3-0:1.0: 2 ports detected
[4294683.074000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[4294683.097000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) ->
IRQ 23
[4294683.097000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294683.097000] ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM
(ICH4/ICH4-M) USB2 EHCI Controller
[4294683.097000] ehci_hcd 0000:00:1d.7: debug port 1
[4294683.098000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 4
[4294683.098000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[4294683.102000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294683.102000] ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver
10 Dec 2004
[4294683.102000] hub 4-0:1.0: USB hub found
[4294683.102000] hub 4-0:1.0: 6 ports detected
[4294683.178000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294683.178000] 8139cp: pci dev 0000:02:00.0 (id 10ec:8139 rev 10) is not an
8139C+ compatible chip
[4294683.178000] 8139cp: Try the "8139too" driver instead.
[4294683.180000] 8139too Fast Ethernet driver 0.9.27
[4294683.180000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 21 (level, low) ->
IRQ 21
[4294683.181000] eth0: RealTek RTL8139 at 0xd800, 00:c0:a8:80:d8:bb, IRQ 21
[4294683.181000] eth0: Identified 8139 chip type 'RTL-8139C'
[4294684.074000] uhci_hcd 0000:00:1d.0: Unlink after no-IRQ? Controller is
probably using the wrong IRQ.
[4294685.770000] ACPI: CPU0 (power states: C1[C1])
[4294685.770000] ACPI: Processor [CPU1] (supports 8 throttling states)
[4294685.900000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
<email address hidden>
[4294687.999000] cdrom: open failed.
[4294688.061000] usb 4-6: new high speed USB device using ehci_hcd and address 5
[4294689.792000] cdrom: open failed.
[4294689.799000] cdrom: open failed.
[4294689.801000] cdrom: open failed.
[4294689.983000] Attempting manual resume
[4294689.983000] swsusp: Suspend partition has wrong signature?
[4294689.994000] SGI XFS with ACLs, security attributes, realtime, large block
numbers, no debug enabled
[4294689.994000] SGI XFS Quota Management subsystem
[4294690.089000] XFS mounting filesystem hda3
[4294690.252000] Ending clean XFS mount for filesystem: hda3
[4294691.821000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294697.259000] Adding 1815304k swap on /dev/hda6. Priority:-1 extents:1
[4294710.310000] parport: PnPBIOS parport detected.
[4294710.310000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[4294710.395000] lp0: using parport0 (interrupt-driven).
[4294710.412000] mice: PS/2 mouse device common for all mice
[4294713.607000] cdrom: open failed.
[4294713.608000] cdrom: open failed.
[4294714.929000] JFS: nTxBlock = 4029, nTxLock = 32237
[4294716.404000] Linux agpgart interface v0.101 (c) Dave Jones
[4294716.416000] agpgart: Detected an Intel i845 Chipset.
[4294716.441000] agpgart: AGP aperture is 64M @ 0xf8000000
[4294716.546000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294716.561000] shpchp: shpc_init : shpc_cap_offset == 0
[4294716.561000] shpchp: shpc_init : shpc_cap_offset == 0
[4294716.561000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294716.934000] hw_random hardware driver 1.0.0 loaded
[4294717.744000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) ->
IRQ 18
[4294718.607000] gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xdc00,
speed 932kHz
[4294720.460000] SCSI subsystem initialized
[4294720.468000] Initializing USB Mass Storage driver...
[4294720.474000] scsi0 : SCSI emulation for USB Mass Storage devices
[4294720.479000] usb-storage: device found at 5
[4294720.479000] usb-storage: waiting for device to settle before scanning
[4294720.479000] usbcore: registered new driver usb-storage
[4294720.479000] USB Mass Storage support registered.
[4294720.631000] Real Time Clock Driver v1.12
[4294720.705000] input: PC Speaker
[4294720.917000] Floppy drive(s): fd0 is 1.44M
[4294720.931000] FDC 0 is a post-1991 82077
[4294723.399000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[4294723.421000] NET: Registered protocol family 17
[4294724.455000] ACPI: Power Button (FF) [PWRF]
[4294724.455000] ACPI: Sleep Button (CM) [SLPB]
[4294724.615000] ibm_acpi: ec object not found
[4294725.479000] Vendor: Fujifilm Model: USB Drive Rev: 4.70
[4294725.479000] Type: Direct-Access ANSI SCSI revision: 00
[4294725.486000] usb-storage: device scan complete
[4294725.554000] SCSI device sda: 444416 512-byte hdwr sectors (228 MB)
[4294725.555000] sda: Write Protect is off
[4294725.555000] sda: Mode Sense: 45 00 00 08
[4294725.555000] sda: assuming drive cache: write through
[4294725.559000] SCSI device sda: 444416 512-byte hdwr sectors (228 MB)
[4294725.559000] sda: Write Protect is off
[4294725.559000] sda: Mode Sense: 45 00 00 08
[4294725.559000] sda: assuming drive cache: write through
[4294725.559000] /dev/scsi/host0/bus0/target0/lun0: p1
[4294725.563000] Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
[4294733.817000] apm: BIOS not found.
[4294738.758000] Bluetooth: Core ver 2.7
[4294738.758000] NET: Registered protocol family 31
[4294738.758000] Bluetooth: HCI device and connection manager initialized
[4294738.758000] Bluetooth: HCI socket layer initialized
[4294738.793000] Bluetooth: L2CAP ver 2.7
[4294738.793000] Bluetooth: L2CAP socket layer initialized
[4294739.077000] Bluetooth: RFCOMM ver 1.5
[4294739.077000] Bluetooth: RFCOMM socket layer initialized
[4294739.077000] Bluetooth: RFCOMM TTY layer initialized

[Scott James Remnant (Canonical) (canonical-scott)]

Almost certainly a dup of 12915 which was fixed since preview ... could you
update to the latest breezy (Colony 5) and try with that.

Thanks,

[Michel Thomas (earthen)]

Sorry this is my first ever bug but her it goes.

After upgrading from Hoary Ubuntu, kernel 2.6.10-4-386, to Hoary Ubuntu, kernel
2.6.10-5-386
I have experienced the same problem, My mouse sometimes will not be detected
during boot up, only
thing is that I'm not in breezy. After fooling around for a few hours I found
that If I were
to move my mouse during the startup process (I have a optical Mouse so even
hitting the desk
could set it off) the mouse dies just before the login screen pops up. but it
works every time
that I startup and do not move the mouse. So I am thinking that it has something
to do with
receiving input from the mouse while it is being initialized.

I am not sure if this is related to this bug or not or if i should of started a
new bug report
but anyway this is it.

[Scott James Remnant (Canonical) (canonical-scott)]

All hotplug bugs are now udev bugs

[Scott James Remnant (Canonical) (canonical-scott)]

No response, almost certainly a 12915 dup, closing the bug

This bug has been marked as a duplicate of bug 19171.