linux-restricted-modules-2.6.24-16-generic acx100_usb does not work with DWL-120+

Bug #226385 reported by Michael Leow
2
Affects Status Importance Assigned to Milestone
linux-restricted-modules-2.6.24 (Ubuntu)
Expired
Undecided
Unassigned

Bug Description

Binary package hint: linux-restricted-modules-2.6.24-16-generic

Release:
Description: Ubuntu 8.04
Release: 8.04

lsusb -vv output available as attachment

Package Affected:
linux-restricted-modules-2.6.24-16-generic:
  Installed: 2.6.24.12-16.34
  Candidate: 2.6.24.12-16.34
  Version table:
 *** 2.6.24.12-16.34 0
        500 http://my.archive.ubuntu.com hardy/restricted Packages
        100 /var/lib/dpkg/status

Correct Output:
 # iwconfig

lo no wireless extensions.

wlan0 IEEE 802.11b+ ESSID:"bu3-4" Nickname:"acx v0.3.37"
          Mode:Managed Frequency:2.437 GHz Access Point: 00:13:10:E7:F1:3B
          Bit Rate:11 Mb/s Tx-Power=18 dBm
          Retry min limit:7 RTS thr:off
          Power Management:off
          Link Quality=0/100 Signal level=20/100 Noise level=41/100
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:0 Invalid misc:0 Missed beacon:0

Incorrect Output:
 # iwconfig

lo no wireless extensions.

wlan0 no wireless extensions.

Symptoms:
dmesg output exact match of Bug #93573 in linux-source-2.6.20 (Ubuntu)

Workaround:
Similar to those documented in Bug #93573 in linux-source-2.6.20 (Ubuntu)

Download and recompile acx100_usb driver from http://acx100.sourceforge.net/

Recompile instructions from http://acx100.sourceforge.net/wiki/ACX
 # cd /usr/src
 # mkdir acx-20080210

 # wget http://downloads.sourceforge.net/acx100/acx-20080210.tar.bz2
 # tar xjvf acx-20080210.tar.bz2
 # cd acx-20080210

 # make -C /lib/modules/`uname -r`/build M=`pwd`

 # make -C /lib/modules/`uname -r`/build M=`pwd` modules_install

By default, the acx driver searches for firmware named "tiacx100usbc0D" in /lib/firmware, so do the following to link to the available firmware

 # cd /lib/firmware
 # ln -s `uname -r`/acx/1.0.9/tiacx100usb tiacx100usbc0D

Reboot and test. iwconfig output should now be correct!

Tags: hardy
Revision history for this message
Michael Leow (jweng-leow) wrote :
Tom Arnold (g0tt)
Changed in linux-restricted-modules-2.6.24:
status: New → Confirmed
Bryce Harrington (bryce)
tags: added: hardy
Revision history for this message
bugbot (bugbot) wrote :

This bug report was filed against an old version of Ubuntu.
Can you confirm whether this is still an issue in natty?

If you don't mind, it would be very helpful if you could update the bug
report in launchpad to 'Fix Released' if it is no longer an issue for
you, or if it is still occurring under natty, please tag the bug 'natty'
so it's easier for us to track.

Changed in linux-restricted-modules-2.6.24 (Ubuntu):
status: Confirmed → New
status: New → Incomplete
Revision history for this message
bugbot (bugbot) wrote :

We're closing this bug since it is has been some time with no response from the original reporter. However, if the issue still exists please feel free to reopen with the requested information. Also, if you could, please test against the latest development version of Ubuntu, since this confirms the bug is one we may be able to pass upstream for help.

Changed in linux-restricted-modules-2.6.24 (Ubuntu):
status: Incomplete → Expired
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.