x-server crashes on startup with intel GMA3000
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Fix Released
|
High
|
Unassigned |
Bug Description
After upgrade from gutsy to hardy, on boot, my x-server freezes with a black screen (and blinking cursor in upper left corner). The keyboard is unresponsive, and the machine cannot be reached over the network. I have to cut the power to restart.
I'm running 64 bit on an optiplex 745. The video card is intel GMA300.
I also tried the hardy live-CD and get the same crash.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Marcus Asshauer (mcas) wrote : | #1 |
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
eb207 (bush) wrote : | #2 |
- this is the xorg.conf that dpgk-reconfigure makes Edit (1.2 KiB, text/plain)
I looked in /var/log/ for the xorg log.
As far as I can tell, its not writing anything there. There is an Xorg.0.log, but that comes from before the problem. When I try to start up the x-server now, as far as I can tell its not writing anything in /var/log/
is there somewhere else to look?
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Bryce Harrington (bryce) wrote : | #3 |
No, just go ahead and attach the /var/log/
Also, we will probably need a full backtrace. See http://
Changed in xserver-xorg-video-intel: | |
status: | New → Incomplete |
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
eb207 (bush) wrote : | #4 |
When it crashes it does not produce and Xorg.0.log file.
Also, I've tried alt-SysRq (my kernel is set up for this) but it doesn't help with this crash.
I've tried running gdb from a remote terminal, I'll paste the output below. When I do that, it ends up hanging in the usual way. I've also looked around to see if its doing a core dump anywhere, but couldn't find one. (I did install xserver-
bush@parapithecus ~$ sudo gdb /usr/bin/Xorg
[sudo] password for bush:
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-
(gdb) run -keeptty -dumbSched
Starting program: /usr/bin/Xorg -keeptty -dumbSched
[Thread debugging using libthread_db enabled]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://
X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux Ubuntu (xorg-server 2:1.4.1~
Current Operating System: Linux parapithecus 2.6.24-16-generic #1 SMP Thu Apr 10 12:47:45 UTC 2008 x86_64
Build Date: 15 April 2008 05:41:18PM
Before reporting problems, check http://
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/
(==) Using config file: "/etc/X11/
[New Thread 0x7f8ca58b46e0 (LWP 6096)]
(WW) intel: No matching Device section for instance (BusID PCI:0:2:1) found
IT hangs here.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
unggnu (unggnu) wrote : | #5 |
Could you please also attach the output of "uname -a" and dmesg? Maybe it is a kernel issue.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
unggnu (unggnu) wrote : | #6 |
Btw. please attach the output of lspci -vvnn too.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
eb207 (bush) wrote : | #7 |
uname -a
Linux parapithecus 2.6.24-16-generic #1 SMP Thu Apr 10 12:47:45 UTC 2008 x86_64 GNU/Linux
dmesg
[ 0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-
[ 0.000000] Command line: root=UUID=
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf5ffc00 (usable)
[ 0.000000] BIOS-e820: 00000000bf5ffc00 - 00000000bf601c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf603c00 - 00000000bf653c00 (reserved)
[ 0.000000] BIOS-e820: 00000000bf653c00 - 00000000bf655c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf655c00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 783871) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used
[ 0.000000] end_pfn_map = 1294336
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FEBF0 checksum 0
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FCE99, 006C (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: FACP 000FCFC1, 00F4 (r3 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: DSDT FFF6A119, 473C (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS BF5FFC00, 0040
[ 0.000000] ACPI: SSDT FFF6E974, 00AA (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD0B5, 0092 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: BOOT 000FD147, 0028 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: ASF! 000FD16F, 0092 (r32 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: MCFG 000FD201, 003E (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: HPET 000FD23F, 0038 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: TCPA 000FD49B, 0032 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: SLIC 000FD277, 00C0 (r1 DELL B8K 14 ASL 61)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 000000000000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 783871) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 000000000000000
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
unggnu (unggnu) wrote : | #8 |
Thanks for posting. Could you please add the line
Driver "vesa"
to your /etc/X11/xorg.conf Device section.
Maybe it is a hardware issue but Gutsy Live CD still works without problems?
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
eb207 (bush) wrote : | #9 |
Adding
Driver "vesa"
to xorg.conf does work. It allows X to come up. So this is good, though it doesn't give me all the choices of screen resultion I'd like.
In answer to your second question, no, the Hardy live CD does not work. It hangs.
Also, I just tried the live CD on a second computer with the same hardware setup, and this too hangs. (video card "Intel Corporation 82Q963/Q965 Integrated Graphics Controller").
So this is a problem with the driver for the intel card?
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Bryce Harrington (bryce) wrote : | #10 |
If the machine can't be reached over the network, then usually that means there has been a kernel failure. That it fails with -intel but not -vesa is a strong clue that the issue is video card related, but it could just be due to trying to use some feature of your hardware that -vesa doesn't support or something (e.g. DRI/Compiz).
The error message about no device for 0.2.1 is normal, it just means there wasn't a second monitor detected.
I'm going to bump this over to the kernel bug team to triage at this point.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Leann Ogasawara (leannogasawara) wrote : | #11 |
Hi eb207,
As unggnu mentioned earlier, care to attach the output of 'sudo lspci -vvnn'.
You mentioned this does not happen with a Gutsy LiveCD and that you upgraded from Gutsy to Hardy. Do you by chance still have the Gutsy kernel available on your system. Would you be able to boot from the Gutsy kernel - might help narrow down that this is indeed a regression in the kernel. Also, just as a test, care to try testing with the Intrepid Ibex 8.10 kernel. It was most recently sync'd with the upstream 2.6.25 kernel and is currently available at the following PPA (personal package archive):
https:/
If you are not familiar with how to install packages from a PPA basically do the following:
Add the following two lines to /etc/apt/
deb http://
deb-src http://
sudo apt-get update
You should then be able to install the linux-image-2.6.25 kernel package. Please let us know your results. This will indicate if the bug exists using the upstream kernel and where the kernel team will want to focus getting this resolved or pull the fix from. Thanks.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
eb207 (bush) wrote : | #12 |
sudo lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation 82Q963/Q965 Memory Controller Hub [8086:2990] (rev 02)
Subsystem: Dell OptiPlex 745 [1028:01da]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: [e0] Vendor Specific Information
00:01.0 PCI bridge [0604]: Intel Corporation 82Q963/Q965 PCI Express Root Port [8086:2991] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dfc00000-dfcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [88] Subsystem: Dell Unknown device [1028:01da]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee0300c Data: 4151
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2
Link: Latency L0s <1us, L1 <4us
Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x0
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 0, PowerLimit 0.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q963/Q965 Integrated Graphics Controller [8086:2992] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Dell Unknown device [1028:01da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ecb8 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 Display controller [0380]: Intel Corporation 82Q963/Q965 Integrated Graphics Controller [8086:2993] (rev 02)
Subsystem: Dell Unknown device [1028:01da]
Control: I/...
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Leann Ogasawara (leannogasawara) wrote : | #13 |
Thanks eb207,
Just wanted to add another quick note that actually rather than editing your /etc/apt/
deb http://
deb-src http://
It avoids possibly messing up the default repository settings that exist in /etc/apt/
Thanks.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
eb207 (bush) wrote : | #14 |
It does look like a kernel issue.
I just booted with an earlier kernel:
uname -a
Linux parapithecus 2.6.20-16-generic #2 SMP Thu Jun 7 19:00:28 UTC 2007 x86_64 GNU/Linux
and it works. that is, i took the vesa line out of xorg.conf, and it doesn't crash this kernel.
I'll try it with that upstream kernel, probably tomorrow.
thanks!
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
eb207 (bush) wrote : | #15 |
I just tried X (without the vesa line) with the 2.6.25-1 kernel, and found that it also hangs.
I also have a modification to what I said about the 2.6.20-16. The first time I boot into that kernel, and startx, it works. However, if I log out, and try again, then it too hangs. (I'm not using gdm at this point. so by logging out, I go back to the console and then try startx again).
thanks.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Leann Ogasawara (leannogasawara) wrote : | #16 |
Hi eb207,
Thanks for testing. When you're running the Intrepid kernel, would you be able to grab the dmesg output from that machine again? I just want to get the most recent log information we can. Thanks.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
eb207 (bush) wrote : | #17 |
Here is dmesg running
2.6.25-1 kernel
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Linux version 2.6.25-1-generic (buildd@promethium) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri May 2 18:59:47 UTC 2008 (Ubuntu 2.6.25-
[ 0.000000] Command line: root=UUID=
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf5ffc00 (usable)
[ 0.000000] BIOS-e820: 00000000bf5ffc00 - 00000000bf601c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf603c00 - 00000000bf653c00 (reserved)
[ 0.000000] BIOS-e820: 00000000bf653c00 - 00000000bf655c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf655c00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 783871) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used
[ 0.000000] max_pfn_mapped = 1294336
[ 0.000000] x86: PAT support disabled.
[ 0.000000] init_memory_mapping
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FCE99, 006C (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: FACP 000FCFC1, 00F4 (r3 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: DSDT FFF6A119, 473C (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS BF5FFC00, 0040
[ 0.000000] ACPI: SSDT FFF6E974, 00AA (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD0B5, 0092 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: BOOT 000FD147, 0028 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: ASF! 000FD16F, 0092 (r32 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: MCFG 000FD201, 003E (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: HPET 000FD23F, 0038 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: TCPA 000FD49B, 0032 (r1 DELL B8K 14 ASL 61)
[ 0.000000] ACPI: SLIC 000FD277, 00C0 (r1 DELL B8K 14 ASL 61)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 000000000000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 783871) 1 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used
[ 0.000000] Bootmem setup node 0 000000000000000
Changed in linux: | |
assignee: | nobody → ubuntu-kernel-team |
importance: | Undecided → High |
status: | Incomplete → Triaged |
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Rached Blili (z-launchpad-dread-net) wrote : | #18 |
Is this bug still being worked on? It's still broken on a fully updated Hardy as of August 12th.
My only workaround (other than using drivers which don't support my monitor's native resolution) is to boot into an older kernel (in recovery mode), run the X fixer, then reboot. Sometimes.. sometimes it works.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
monkeyking (glidecreme) wrote : | #19 |
I think this bug is related to this https:/
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Leann Ogasawara (leannogasawara) wrote : | #21 |
The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test:
1) If you are comfortable installing packages on your own, the linux-image-
--or--
2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://
Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Panu Saikkonen (snifnos) wrote : | #22 |
This issue is still unresolved. Intel driver still hangs on my Dell Optiplex 745 on Kubuntu 8.04.1 with Ibex kernel. Using vesa driver as a workaround helps, but is not the solution :-)
xxx@xxx-desktop:~$ uname -a
Linux xxx-desktop 2.6.27-3-generic #1 SMP Sat Sep 13 09:38:23 UTC 2008 i686 GNU/Linux
xxx@xxx-desktop:~$ sudo lspci -vvnn
*snip*
00:02.0 VGA compatible controller [0300]: Intel Corporation 82Q963/Q965 Integrated Graphics Controller [8086:2992] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Dell Unknown device [1028:01da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfe00000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at ecb8 [size=8]
00:02.1 Display controller [0380]: Intel Corporation 82Q963/Q965 Integrated Graphics Controller [8086:2993] (rev 02)
Subsystem: Dell Unknown device [1028:01da]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at dff00000 (32-bit, non-prefetchable) [size=1M]
*snip*
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Leann Ogasawara (leannogasawara) wrote : | #23 |
Unfortunately it looks like the kernel team was unable to address this during Intrepid's development cycle. Can we just get confirmation this is still an issue with Intrepid's final release? Thanks.
Changed in linux: | |
status: | Triaged → Incomplete |
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Rached Blili (z-launchpad-dread-net) wrote : | #24 |
I am NOT experiencing this issue any more with the release version of Intrepid Ibex.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Panu Saikkonen (snifnos) wrote : | #25 |
I will also test tomorrow with a live cd of Intrepid and clean install. I will let you know how it went.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Geir Ove Myhr (gomyhr) wrote : | #26 |
I have tested LiveCD with Intrepid and it seemed to be fixed there. I also checked the Intrepid alpha4 LiveCD to see if it was the kernel upgrade from 2.6.26 to 2.6.27 that did it, but I could also not reproduce it with alpha4.
In Hardy (32-bit, fully updated) it's still very much an issue, though. I can get around it by using the i810 driver, but that has other bugs.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Panu Saikkonen (snifnos) wrote : | #27 |
I tested with ubuntu 8.10 live cd and can confirm this bug has been fixed.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Jouni Mettala (jouni-mettala) wrote : | #28 |
Thanks. Marking as fix released.
Changed in linux: | |
status: | Incomplete → Fix Released |
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Launchpad Janitor (janitor) wrote : Kernel team bugs | #29 |
Per a decision made by the Ubuntu Kernel Team, bugs will longer be assigned to the ubuntu-kernel-team in Launchpad as part of the bug triage process. The ubuntu-kernel-team is being unassigned from this bug report. Refer to https:/
Thank you for reporting this bug. Please add your xorg.conf and the Xorg.log.