sd card reader not working in Hardy

[Daniel Sobe]

I have a Dell Inspiron 640m and the SD card reader stopped working from Gutsy to Hardy.

Here is the output from "lspci":

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
02:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
02:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
02:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
02:01.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
02:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)
02:01.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)

There is no info in the logs when I insert/remove a SD card, as if the reader would not exist at all.

[Brian Murray (brian-murray)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. This bug did not have a package associated with it, which is important for ensuring that it gets looked at by the proper developers. You can learn more about finding the right package at https://wiki.ubuntu.com/Bugs/FindRightPackage . I have classified this bug as a bug in linux the kernel for Hardy Heron.

[Brian Murray (brian-murray)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. Unfortunately we can't fix it, because your description doesn't yet have enough information.
Please include as attachments the following additional information, if you have not already done so (please pay attention to lspci's additional options), as required by the Ubuntu Kernel Team:
1. Please include the output of the command 'uname -a' in your next response. It should be one, long line of text which includes the exact kernel version you're running, as well as the CPU architecture.
2. Please run the command 'dmesg > dmesg.log' and attach the resulting file 'dmesg.log' to this bug report.
3. Please run the command 'sudo lspci -vvnn > lspci-vvnn.log' and attach the resulting file 'lspci-vvnn.log' to this bug report.
For your reference, the full description of procedures for kernel-related bug reports is available at https://wiki.ubuntu.com/KernelTeamBugPolicies . Thanks in advance!

[Daniel Sobe (schreibmal)]

Linux krabat 2.6.24-15-generic #1 SMP Fri Apr 4 03:48:31 UTC 2008 i686 GNU/Linux
d

[Daniel Sobe (schreibmal)]

I'm sorry to not have noticed this earlier: The problem only occurs after resume from STD. An ordinary boot does not show described behavior. Attached is the part of the kernel log which is shown when a SD card is inserted the first time after resume.

[Eymen A (eal)]

I can confirm this bug independent of suspend-to-disk use.
SD Cards are detected but not configured as a device. See dmesg output at the bottom of this post.
Memory Stick are not recognized at all.

my setup:
hardy heron 32bit
uname -r: 2.6.24-19-generic
lspci:
07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
07:05.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
07:05.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)
07:05.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)

dmesg|grep ricoh :
[ 35.318476] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 35.318479] ricoh-mmc: Copyright(c) Philip Langdale
[ 36.760409] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
[ 36.760424] ricoh-mmc: Controller is now disabled.

after inserting an SD Card, dmesg:
 mmc0: new SD card at address e624
but no device is configured

[Leann Ogasawara (leannogasawara)]

The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test:

1) If you are comfortable installing packages on your own, the linux-image-2.6.27-* package is currently available for you to install and test.

--or--

2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. You should then be able to test via a LiveCD.

Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback.

[Launchpad Janitor (janitor)]

Per a decision made by the Ubuntu Kernel Team, bugs will longer be assigned to the ubuntu-kernel-team in Launchpad as part of the bug triage process. The ubuntu-kernel-team is being unassigned from this bug report. Refer to https://wiki.ubuntu.com/KernelTeamBugPolicies for more information. Thanks.

[penalvch (penalvch)]

Daniel Sobe, thank you for reporting this and helping make Ubuntu better. Hardy desktop reached EOL on May 12, 2011.
Please see this document for currently supported Ubuntu releases:
https://wiki.ubuntu.com/Releases

We were wondering if this is still an issue in a supported release? If so, could you please test for this with the latest development release of Ubuntu? ISO CD images are available from http://cdimage.ubuntu.com/daily-live/current/ .

If it remains an issue, could you please run the following command in the development release from a Terminal (Applications->Accessories->Terminal), as it will automatically gather and attach updated debug information to this report:

apport-collect -p linux <replace-with-bug-number>

Also, could you please test the latest upstream kernel available following https://wiki.ubuntu.com/KernelMainlineBuilds ? It will allow additional upstream developers to examine the issue. Please do not test the kernel in the mainline kernels archive directory daily folder, but the one all the way at the bottom. Once you've tested the upstream kernel, please comment on which kernel version specifically you tested. If this bug is fixed in the mainline kernel, please add the following tags:
kernel-fixed-upstream
kernel-fixed-upstream-VERSION-NUMBER

where VERSION-NUMBER is the version number of the kernel you tested. For example:
kernel-fixed-upstream-v3.7-rc1-quantal

This can be done by clicking on the yellow circle with a black pencil icon next to the word Tags located at the bottom of the bug description. As well, please remove the tag:
needs-upstream-testing

If the mainline kernel does not fix this bug, please add the following tags:
kernel-bug-exists-upstream
kernel-bug-exists-upstream-VERSION-NUMBER

As well, please remove the tag:
needs-upstream-testing

If you are unable to test the mainline kernel, please comment as to why specifically you were unable to test it and add the following tags:
kernel-unable-to-test-upstream
kernel-unable-to-test-upstream-VERSION-NUMBER

Please let us know your results. Thank you for your understanding.

Helpful bug reporting tips:
https://help.ubuntu.com/community/ReportingBugs

[Launchpad Janitor (janitor)]

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]