static wired network does not up after resume

Bug #210347 reported by Peio Ziarsolo
0
Affects Status Importance Assigned to Milestone
pm-utils (Ubuntu)
Invalid
Medium
Daniel Hahler

Bug Description

Binary package hint: acpi-support

My c2d mac mini's wired interface does not up after resume.
Some information:

Release: Hardy up to date 1 of april
acpi-support version: 0.108

[peio]@[gorbea]:$ ping 192.168.1.1 [19:12:07]
connect: Network is unreachable
[peio]@[gorbea]:$ sudo ifup eth0 [19:12:13]
[sudo] password for peio:
ifup: interface eth0 already configured
[peio]@[gorbea]:$ ping 192.168.1.1 [19:12:24]
connect: Network is unreachable
[peio]@[gorbea]:$ sudo /etc/init.d/networking restart [19:12:31]
 * Reconfiguring network interfaces...
RTNETLINK answers: No such process
SIOCDELRT: No such process
                                                                               [ OK ]
[peio]@[gorbea]:$ ping 192.168.1.1 [19:12:49]
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=1.23 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=1.04 ms

--- 192.168.1.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 1.043/1.140/1.238/0.103 ms
------------------------------------------------------------------------------
ethernet car info:
01:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 22)
 Subsystem: Marvell Technology Group Ltd. Marvell RDK-8053
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 256 bytes
 Interrupt: pin A routed to IRQ 221
 Region 0: Memory at 50200000 (64-bit, non-prefetchable) [size=16K]
 Region 2: I/O ports at 1000 [size=256]
 Expansion ROM at 50500000 [disabled] [size=128K]
 Capabilities: [48] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [50] Vital Product Data
 Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
  Address: 00000000fee0300c Data: 413a
 Capabilities: [e0] Express Legacy Endpoint IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
  Device: Latency L0s unlimited, L1 unlimited
  Device: AtnBtn- AtnInd- PwrInd-
  Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
  Link: Latency L0s <256ns, L1 unlimited
  Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
  Link: Speed 2.5Gb/s, Width x1

Tags: network resume
Revision history for this message
Daniel Hahler (blueyed) wrote :

Thank you for your bug report.

This is the regression caused by bug 162654, which I've reported there.
I'm marking it as duplicate.

Changed in acpi-support:
assignee: nobody → blueyed
importance: Undecided → Medium
status: New → Invalid
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.