No sound for TV with Avermedia AVerTV GO 007 FM on hardy

[Artis Rozentāls]

saa7134 module loaded with options "card=57 tuner=5" which works in gutsy. Sound works for radio and TV sound is there when the module is unloaded, but disappears when the module is loaded again.

[ 35.802804] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 35.802905] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 20
[ 35.802915] saa7130[0]: found at 0000:00:0d.0, rev: 1, irq: 20, latency: 32, mmio: 0xef005000
[ 35.802923] saa7130[0]: subsystem: 1461:d109, board: Avermedia AVerTV GO 007 FM [card=57,insmod option]
[ 35.802945] saa7130[0]: board init: gpio is 10400
[ 35.803036] input: saa7134 IR (Avermedia AVerTV GO as /devices/pci0000:00/0000:00:0d.0/input/input5
[ 35.945649] saa7130[0]: i2c eeprom 00: 61 14 09 d1 ff ff ff ff ff ff ff ff ff ff ff ff
[ 35.945662] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 35.945670] saa7130[0]: i2c eeprom 20: 13 02 ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 35.945677] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 35.945684] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 35.945691] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 35.945698] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 35.945705] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 36.409006] tuner 1-0061: chip found @ 0xc2 (saa7130[0])
[ 36.409044] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 36.409048] tuner 1-0061: type set to Philips PAL_BG (FI1
[ 36.409053] tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
[ 36.409056] tuner 1-0061: type set to Philips PAL_BG (FI1
[ 36.449355] saa7130[0]: registered device video0 [v4l2]
[ 36.449381] saa7130[0]: registered device vbi0
[ 36.449401] saa7130[0]: registered device radio0

[Leann Ogasawara (leannogasawara)]

Hi Artis,

Care you attach your full dmesg output which contains the messages from when the module is first loaded, then unloaded, and then reloaded? Just curious what other interesting messages may be getting logged that might help debug. Thanks.

[Artis Rozentāls (artis)]

[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f4ce0
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6650 checksum 0
[ 0.000000] ACPI: RSDP 000F6650, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: DSDT 3FFF30C0, 3967 (r1 GBT AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF6A40, 005A (r1 GBT AWRDACPI 42302E31 AWRD 1010101)
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 20, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT...

[Leann Ogasawara (leannogasawara)]

The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test:

1) If you are comfortable installing packages on your own, the linux-image-2.6.27-* package is currently available for you to install and test.

--or--

2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. You should then be able to test via a LiveCD.

Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback.

[Launchpad Janitor (janitor)]

Per a decision made by the Ubuntu Kernel Team, bugs will longer be assigned to the ubuntu-kernel-team in Launchpad as part of the bug triage process. The ubuntu-kernel-team is being unassigned from this bug report. Refer to https://wiki.ubuntu.com/KernelTeamBugPolicies for more information. Thanks.

[Jeremy Foshee (jeremyfoshee)]

This bug report was marked as Triaged a while ago but has not had any updated comments for quite some time. Please let us know if this issue remains in the current Ubuntu release, http://www.ubuntu.com/getubuntu/download . If the issue remains, click on the current status under the Status column and change the status back to "New". Thanks.

[This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.]

[Jeremy Foshee (jeremyfoshee)]

This bug report was marked as Incomplete and has not had any updated comments for quite some time. As a result this bug is being closed. Please reopen if this is still an issue in the current Ubuntu release http://www.ubuntu.com/getubuntu/download . Also, please be sure to provide any requested information that may have been missing. To reopen the bug, click on the current status under the Status column and change the status back to "New". Thanks.

[This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.]