libcrypto.so.1.1: cannot open shared object file: No such file or directory

[Giuseppe Iannello]

On a fresh installation, using this module fails with the following error:

Impossible to load module /usr/lib/x86_64-linux-gnu/libfprint-2/tod-1/libfprint-2-tod-1-broadcom.so: libcrypto.so.1.1: cannot open shared object file: No such file or directory

The package libssl1.1 is not available anymore starting from 22.04 LTS. Any chance to have a version of this library compiled against libssl3?

[Andy Chi (andch)]

Hi,
Currently we're waiting for the new package for 22.04. Here is a test lib ppa. Please help to install it.

https://launchpad.net/~andch/+archive/ubuntu/staging-fprint

libfprint-2-tod1-broadcom / 5.12.303-0ubuntu1~22.04.01~oem3

[Giuseppe Iannello (giuseppe-iannello)]

It gets stuck in a firmware upgrade loop. This also causes GDM to never get to the login prompt. Had to delete the firmware files to un-stuck this, and revert to the non-beta package.

Even tried with a restart and a power off/power on cycle, just in case. No luck

root@maybe:/var/lib/fprint/fw# /usr/libexec/fprintd
In cvif_IsUshThere(), cv_get_ush_ver() status: (0x0)
Control Vault getting chip type
Citadel A0 CID7 Chip Found....
Current AAI Version = 5.8.12.0
Current SBI Version = 122
AAI version available for upgrade = 5.12.4.0
SBI version available for upgrade = 172
Updating ControlVault firmware from 5.8.12.0 to 5.12.4.0
Event: FwUpgradeStarted
Upgrade the SBI from 122 to 172, first clear SCD
Writing /var/lib/fprint/fw/bcm_cv_clearscd.bin to flash
cv_flash_update() successful
Reset to SBI to update the SBI....
In cvif_IsUshThere(), cv_get_ush_ver() status: (0x13)
In cvif_IsUshThere(), cv_get_ush_ver() status: (0x0)
Found ControlVault Chip Type: CITADEL A0 CID7
Event: FwUpgradeInProgress 1
Going to update SBI (bcmsbiCitadelA0_7.otp)
Writing /var/lib/fprint/fw/bcmsbiCitadelA0_7.otp to flash
cv_flash_update() successful
BCM Update attempt 1
Event: FwUpgradeInProgress 2
Going to clear SCD
Writing /var/lib/fprint/fw/bcm_cv_clearscd.bin to flash
cv_flash_update() successful
Going to Reset to SBI
Event: FwUpgradeInProgress 3
Waiting for Control Vault to comeback from reset

...............
In cvif_IsUshThere(), cv_get_ush_ver() status: (0x0)
SBI mode
Security check before flashing passed
Citadel A0 CID7 Chip Found....
Going to update BCM (bcmCitadel_7.otp)
Event: FwUpgradeInProgress 4
cv_open() return status: 0x57
Going to update the BCM with /var/lib/fprint/fw/bcmCitadel_7.otp
Please wait, this takes about one minute
Firmware Upgrade Complete
Going to Reset Control Vault
Event: FwUpgradeInProgress 5
Reboot USH
Waiting for Control Vault to comeback from reset

......libusb: error [udev_hotplug_event] ignoring udev action change
.........
In cvif_IsUshThere(), cv_get_ush_ver() status: (0x0)
Citadel A0 CID7 Chip Found....
Opening CV session
Event: FwUpgradeInProgress 6
Control Vault firmware upgrade successful
Citadel A0 CID7 Chip Found....
Sensor type : 16 Sensor firmware version on device: GF5288_GM188WNC_APP_10009 length: 25
Sensor-firmware file signature verification is valid
Sensor firmware version in file(sensor 16): GF5288_GM188WNC_APP_10009 length: 25
Sensor firmware versions in file and on device match
libfprint-context-Message: 12:20:10.224: Ignoring device due to initialization error: An unspecified error occurred!

(fprintd:6579): GLib-GIO-CRITICAL **: 12:20:10.224: g_task_return_boolean: assertion 'G_IS_TASK (task)' failed
In cvif_IsUshThere(), cv_get_ush_ver() status: (0x0)
Control Vault getting chip type
Citadel A0 CID7 Chip Found....
Current AAI Version = 5.9.13.0
Current SBI Version = 137
AAI version available for upgrade = 5.12.4.0
SBI version available for upgrade = 172
Updating ControlVault firmware from 5.9.13.0 to 5.12.4.0
Event: FwUpgradeStarted
Upgrade the SBI from 137 to 172, first clear SCD
Writing /var/lib/fprint/fw/bcm_cv_clearscd.bin to flash
cv_flash_update() successful
Reset to SBI to update the SBI....
I...

[Giuseppe Iannello (giuseppe-iannello)]

nevermind, https://bugs.launchpad.net/libfprint-2-tod1-broadcom/+bug/1956885/comments/21 this did the trick. The new version seems to work fine, I'll have it running for a few days and let you know

[e-Vent (fmaster)]

Likewise I got the fingerprint reader working with this PPA on my Latitude 5401 (0a5c:5843 Broadcom Corp. 58200) and the fix provided in this comment: https://bugs.launchpad.net/libfprint-2-tod1-broadcom/+bug/1956885/comments/21