klear does not parse channels.conf

[Hadmut Danisch]

Binary package hint: klear

Hi,

I can't start klear with any channels.conf, no matter whether I use one from the klear.org website
or one generated with scan. See the attached screenshot for example error messages.

Maybe the file format has changed. Please upgrade.

[Hadmut Danisch (hadmut)]

Ah, btw, example channels.conf that does not work:

ZDFtheaterkanal:346000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:1110:1120:28016
ZDFdokukanal:346000000:INVERSION_AUTO:6900000:FEC_NONE:QAM_64:660:670:28014

[dorpm (dorpmueller)]

Same behaviour here on my machine too.

Here a part of my channels.conf:
Das Erste:522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1401:1402:14
rbb Berlin:522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1201:1202:12
rbb Brandenburg:522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1201:1202:11
Phoenix:522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1301:1302:13
EinsExtra:522000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_16:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE:1501:1502:15

Florian

[Daniel T Chen (crimsun)]

Is this symptom still reproducible in 8.10 or 9.04?

[Pedro Villavicencio (pedro)]

We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to New. Thanks again!.

[Johann Petrak (johann-petrak)]

I have the same error with Ubuntu 9.04 and klear version 0.6.1-0ubuntu1.
The channels.conf file created by w_scan produces an error dialog with the message "Error: parse error, not valid". Pressing the "Show details" button of that dialog shows another dialog as shown in the attached screen capture.

[Johann Petrak (johann-petrak)]

Another channels.conf file that does not work and shows a dialog error. This one has been created with the scan program (while the previous was created with the w_scan program)

[Jonathan Thomas (echidnaman)]

Klear has been removed from distribution due to the lack of a Qt4 port and will not be available for installation in upcoming versions of Ubuntu. You may wish to try KMPlayer (which offers DVB support) until a Qt4 port of Klear is released, if one is released.