[ 0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03 [ 0.000000] Linux version 5.3.0-24-generic (buildd@lgw01-amd64-035) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #26-Ubuntu SMP Thu Nov 14 01:33:18 UTC 2019 (Ubuntu 5.3.0-24.26-generic 5.3.10) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-24-generic root=UUID=9ff1c776-2a6a-46be-a74f-61646ac9ac90 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Hygon HygonGenuine [ 0.000000] Centaur CentaurHauls [ 0.000000] zhaoxin Shanghai [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ade9fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007adea000-0x000000007adeafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007adeb000-0x000000007adebfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007adec000-0x000000008a23afff] usable [ 0.000000] BIOS-e820: [mem 0x000000008a23b000-0x000000008a5e3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008a5e4000-0x000000008a624fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000008a625000-0x000000008af0dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000008af0e000-0x000000008b51efff] reserved [ 0.000000] BIOS-e820: [mem 0x000000008b51f000-0x000000008b5fdfff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000008b5fe000-0x000000008b5fefff] usable [ 0.000000] BIOS-e820: [mem 0x000000008b5ff000-0x000000008f7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026f7fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.40 by American Megatrends [ 0.000000] efi: ACPI=0x8a5f1000 ACPI 2.0=0x8a5f1000 SMBIOS=0xf0000 SMBIOS 3.0=0xf0020 TPMFinalLog=0x8aebd000 ESRT=0x8b2a8118 MEMATTR=0x86fd2018 [ 0.000000] secureboot: Secure boot could not be determined (mode 0) [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: Dell Inc. Inspiron 5570/09YTN7, BIOS 1.2.3 05/15/2019 [ 0.000000] tsc: Detected 1800.000 MHz processor [ 0.000856] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000857] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000862] last_pfn = 0x26f800 max_arch_pfn = 0x400000000 [ 0.000865] MTRR default type: write-back [ 0.000865] MTRR fixed ranges enabled: [ 0.000866] 00000-9FFFF write-back [ 0.000867] A0000-BFFFF uncachable [ 0.000867] C0000-FFFFF write-protect [ 0.000868] MTRR variable ranges enabled: [ 0.000869] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000870] 1 base 00A0000000 mask 7FE0000000 uncachable [ 0.000870] 2 base 0090000000 mask 7FF0000000 uncachable [ 0.000871] 3 base 008E000000 mask 7FFE000000 uncachable [ 0.000871] 4 base 008D000000 mask 7FFF000000 uncachable [ 0.000872] 5 disabled [ 0.000872] 6 disabled [ 0.000872] 7 disabled [ 0.000873] 8 disabled [ 0.000873] 9 disabled [ 0.001198] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001324] last_pfn = 0x8b5ff max_arch_pfn = 0x400000000 [ 0.007483] esrt: Reserving ESRT space from 0x000000008b2a8118 to 0x000000008b2a8150. [ 0.007488] check: Scanning 1 areas for low memory corruption [ 0.007491] Using GB pages for direct mapping [ 0.007493] BRK [0x266801000, 0x266801fff] PGTABLE [ 0.007494] BRK [0x266802000, 0x266802fff] PGTABLE [ 0.007495] BRK [0x266803000, 0x266803fff] PGTABLE [ 0.007531] BRK [0x266804000, 0x266804fff] PGTABLE [ 0.007532] BRK [0x266805000, 0x266805fff] PGTABLE [ 0.007658] BRK [0x266806000, 0x266806fff] PGTABLE [ 0.007685] BRK [0x266807000, 0x266807fff] PGTABLE [ 0.007730] BRK [0x266808000, 0x266808fff] PGTABLE [ 0.007772] BRK [0x266809000, 0x266809fff] PGTABLE [ 0.007839] BRK [0x26680a000, 0x26680afff] PGTABLE [ 0.007903] RAMDISK: [mem 0x324b7000-0x35252fff] [ 0.007909] ACPI: Early table checksum verification disabled [ 0.007911] ACPI: RSDP 0x000000008A5F1000 000024 (v02 DELL ) [ 0.007914] ACPI: XSDT 0x000000008A5F10C8 000114 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.007918] ACPI: FACP 0x000000008A616680 00010C (v05 DELL CBX3 01072009 AMI 00010013) [ 0.007922] ACPI: DSDT 0x000000008A5F1270 02540E (v02 DELL CBX3 01072009 INTL 20160422) [ 0.007924] ACPI: FACS 0x000000008AF0B180 000040 [ 0.007926] ACPI: UEFI 0x000000008A617000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000) [ 0.007928] ACPI: APIC 0x000000008A617640 0000BC (v03 DELL CBX3 01072009 AMI 00010013) [ 0.007930] ACPI: FPDT 0x000000008A617700 000044 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.007932] ACPI: FIDT 0x000000008A617748 0000AC (v01 DELL CBX3 01072009 AMI 00010013) [ 0.007934] ACPI: MCFG 0x000000008A6177F8 00003C (v01 DELL CBX3 01072009 MSFT 00000097) [ 0.007935] ACPI: HPET 0x000000008A617838 000038 (v01 DELL CBX3 01072009 AMI. 0005000B) [ 0.007937] ACPI: SSDT 0x000000008A617870 000359 (v01 SataRe SataTabl 00001000 INTL 20160422) [ 0.007939] ACPI: BOOT 0x000000008A617BD0 000028 (v01 DELL CBX3 01072009 AMI 00010013) [ 0.007941] ACPI: SSDT 0x000000008A617BF8 0012DE (v02 SaSsdt SaSsdt 00003000 INTL 20160422) [ 0.007943] ACPI: HPET 0x000000008A618ED8 000038 (v01 INTEL KBL-ULT 00000001 MSFT 0000005F) [ 0.007945] ACPI: SSDT 0x000000008A618F10 000825 (v02 INTEL xh_OEMBD 00000000 INTL 20160422) [ 0.007947] ACPI: UEFI 0x000000008A619738 000042 (v01 00000000 00000000) [ 0.007949] ACPI: SSDT 0x000000008A619780 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) [ 0.007950] ACPI: LPIT 0x000000008A61AF30 000094 (v01 INTEL KBL-ULT 00000000 MSFT 0000005F) [ 0.007952] ACPI: WSMT 0x000000008A61AFC8 000028 (v01 DELL CBX3 00000000 MSFT 0000005F) [ 0.007954] ACPI: SSDT 0x000000008A61AFF0 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422) [ 0.007957] ACPI: SSDT 0x000000008A61B138 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) [ 0.007958] ACPI: SSDT 0x000000008A61B3D8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) [ 0.007960] ACPI: SSDT 0x000000008A61E3E0 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422) [ 0.007962] ACPI: DBGP 0x000000008A61E8F8 000034 (v01 INTEL 00000002 MSFT 0000005F) [ 0.007964] ACPI: DBG2 0x000000008A61E930 000054 (v00 INTEL 00000002 MSFT 0000005F) [ 0.007966] ACPI: SSDT 0x000000008A61E988 0007AC (v02 INTEL UsbCTabl 00001000 INTL 20160422) [ 0.007968] ACPI: SSDT 0x000000008A61F138 004E1D (v02 DptfTa DptfTabl 00001000 INTL 20160422) [ 0.007969] ACPI: MSDM 0x000000008A623F58 000055 (v03 DELL CBX3 06222004 AMI 00010013) [ 0.007971] ACPI: SLIC 0x000000008A623FB0 000176 (v03 DELL CBX3 01072009 MSFT 00010013) [ 0.007973] ACPI: BGRT 0x000000008A624128 000038 (v00 01072009 AMI 00010013) [ 0.007975] ACPI: UEFI 0x000000008A624160 00005C (v01 INTEL RstSataV 00000000 ?? 00000000) [ 0.007977] ACPI: TPM2 0x000000008A6241C0 000034 (v03 DELL CBX3 00000001 AMI 00000000) [ 0.007979] ACPI: DMAR 0x000000008A6241F8 0000CC (v01 INTEL KBL 00000001 INTL 00000001) [ 0.007985] ACPI: Local APIC address 0xfee00000 [ 0.008143] No NUMA configuration found [ 0.008144] Faking a node at [mem 0x0000000000000000-0x000000026f7fffff] [ 0.008151] NODE_DATA(0) allocated [mem 0x26f7d5000-0x26f7fffff] [ 0.008310] Zone ranges: [ 0.008310] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.008311] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.008312] Normal [mem 0x0000000100000000-0x000000026f7fffff] [ 0.008313] Device empty [ 0.008313] Movable zone start for each node [ 0.008316] Early memory node ranges [ 0.008316] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.008317] node 0: [mem 0x0000000000059000-0x000000000009dfff] [ 0.008317] node 0: [mem 0x0000000000100000-0x000000007ade9fff] [ 0.008318] node 0: [mem 0x000000007adec000-0x000000008a23afff] [ 0.008318] node 0: [mem 0x000000008b5fe000-0x000000008b5fefff] [ 0.008319] node 0: [mem 0x0000000100000000-0x000000026f7fffff] [ 0.008492] Zeroed struct page in unavailable ranges: 24106 pages [ 0.008493] Initmem setup node 0 [mem 0x0000000000001000-0x000000026f7fffff] [ 0.008494] On node 0 totalpages: 2070998 [ 0.008495] DMA zone: 64 pages used for memmap [ 0.008495] DMA zone: 22 pages reserved [ 0.008496] DMA zone: 3996 pages, LIFO batch:0 [ 0.008535] DMA32 zone: 8777 pages used for memmap [ 0.008536] DMA32 zone: 561722 pages, LIFO batch:63 [ 0.019075] Normal zone: 23520 pages used for memmap [ 0.019075] Normal zone: 1505280 pages, LIFO batch:63 [ 0.042119] Reserving Intel graphics memory at [mem 0x8d800000-0x8f7fffff] [ 0.042340] ACPI: PM-Timer IO Port: 0x1808 [ 0.042341] ACPI: Local APIC address 0xfee00000 [ 0.042346] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.042347] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.042347] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.042347] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.042348] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.042348] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.042349] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.042349] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) [ 0.042376] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 [ 0.042377] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.042378] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.042379] ACPI: IRQ0 used by override. [ 0.042380] ACPI: IRQ9 used by override. [ 0.042381] Using ACPI (MADT) for SMP configuration information [ 0.042382] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.042386] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.042400] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.042401] PM: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.042402] PM: Registered nosave memory: [mem 0x0009e000-0x000fffff] [ 0.042403] PM: Registered nosave memory: [mem 0x7adea000-0x7adeafff] [ 0.042404] PM: Registered nosave memory: [mem 0x7adeb000-0x7adebfff] [ 0.042405] PM: Registered nosave memory: [mem 0x8a23b000-0x8a5e3fff] [ 0.042405] PM: Registered nosave memory: [mem 0x8a5e4000-0x8a624fff] [ 0.042406] PM: Registered nosave memory: [mem 0x8a625000-0x8af0dfff] [ 0.042406] PM: Registered nosave memory: [mem 0x8af0e000-0x8b51efff] [ 0.042406] PM: Registered nosave memory: [mem 0x8b51f000-0x8b5fdfff] [ 0.042407] PM: Registered nosave memory: [mem 0x8b5ff000-0x8f7fffff] [ 0.042408] PM: Registered nosave memory: [mem 0x8f800000-0xdfffffff] [ 0.042408] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.042408] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] [ 0.042409] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] [ 0.042409] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] [ 0.042409] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.042410] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff] [ 0.042410] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.042411] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.042411] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.042412] [mem 0x8f800000-0xdfffffff] available for PCI devices [ 0.042413] Booting paravirtualized kernel on bare hardware [ 0.042416] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.042420] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.042731] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144 [ 0.042735] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152 [ 0.042736] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.042755] Built 1 zonelists, mobility grouping on. Total pages: 2038615 [ 0.042756] Policy zone: Normal [ 0.042757] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-24-generic root=UUID=9ff1c776-2a6a-46be-a74f-61646ac9ac90 ro quiet splash vt.handoff=7 [ 0.043632] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.044080] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.044140] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.051239] Calgary: detecting Calgary via BIOS EBDA area [ 0.051240] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.084508] Memory: 7950180K/8283992K available (14339K kernel code, 2388K rwdata, 4732K rodata, 2668K init, 5056K bss, 333812K reserved, 0K cma-reserved) [ 0.084644] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.084655] Kernel/User page tables isolation: enabled [ 0.084669] ftrace: allocating 43215 entries in 169 pages [ 0.097396] rcu: Hierarchical RCU implementation. [ 0.097397] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.097398] Tasks RCU enabled. [ 0.097398] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.097399] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.099740] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16 [ 0.100024] random: crng done (trusting CPU's manufacturer) [ 0.100048] vt handoff: transparent VT on vt#7 [ 0.100053] Console: colour dummy device 80x25 [ 0.100057] printk: console [tty0] enabled [ 0.100072] ACPI: Core revision 20190703 [ 0.100334] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.100401] APIC: Switch to symmetric I/O mode setup [ 0.100403] DMAR: Host address width 39 [ 0.100404] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.100409] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e [ 0.100409] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.100412] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da [ 0.100413] DMAR: RMRR base: 0x0000008a30f000 end: 0x0000008a32efff [ 0.100414] DMAR: RMRR base: 0x0000008d000000 end: 0x0000008f7fffff [ 0.100414] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0 [ 0.100416] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.100416] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.100417] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.102385] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.102386] x2apic enabled [ 0.102399] Switched APIC routing to cluster x2apic. [ 0.106340] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.124373] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19f2297dd97, max_idle_ns: 440795236593 ns [ 0.124377] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.00 BogoMIPS (lpj=7200000) [ 0.124378] pid_max: default: 32768 minimum: 301 [ 0.126054] LSM: Security Framework initializing [ 0.126061] Yama: becoming mindful. [ 0.126110] AppArmor: AppArmor initialized [ 0.126161] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.126186] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.126345] *** VALIDATE proc *** [ 0.126385] *** VALIDATE cgroup1 *** [ 0.126386] *** VALIDATE cgroup2 *** [ 0.126440] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.126457] process: using mwait in idle threads [ 0.126459] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.126460] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.126462] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.126462] Spectre V2 : Mitigation: Full generic retpoline [ 0.126463] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.126463] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.126464] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.126465] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.126465] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.126467] MDS: Mitigation: Clear CPU buffers [ 0.126684] Freeing SMP alternatives memory: 36K [ 0.128436] TSC deadline timer enabled [ 0.128441] smpboot: CPU0: Intel(R) Core(TM) i5-8250U CPU @ 1.60GHz (family: 0x6, model: 0x8e, stepping: 0xa) [ 0.128517] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.128522] ... version: 4 [ 0.128522] ... bit width: 48 [ 0.128522] ... generic registers: 4 [ 0.128523] ... value mask: 0000ffffffffffff [ 0.128523] ... max period: 00007fffffffffff [ 0.128524] ... fixed-purpose events: 3 [ 0.128524] ... event mask: 000000070000000f [ 0.128578] rcu: Hierarchical SRCU implementation. [ 0.129424] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.129495] smp: Bringing up secondary CPUs ... [ 0.129552] x86: Booting SMP configuration: [ 0.129553] .... node #0, CPUs: #1 #2 #3 #4 [ 0.133927] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.133927] #5 #6 #7 [ 0.136707] smp: Brought up 1 node, 8 CPUs [ 0.136707] smpboot: Max logical packages: 1 [ 0.136707] smpboot: Total of 8 processors activated (28800.00 BogoMIPS) [ 0.139060] devtmpfs: initialized [ 0.139060] x86/mm: Memory block size: 128MB [ 0.140383] PM: Registering ACPI NVS region [mem 0x7adea000-0x7adeafff] (4096 bytes) [ 0.140384] PM: Registering ACPI NVS region [mem 0x8a625000-0x8af0dfff] (9342976 bytes) [ 0.140501] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.140501] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.140501] pinctrl core: initialized pinctrl subsystem [ 0.140624] PM: RTC time: 13:58:32, date: 2019-12-18 [ 0.140715] NET: Registered protocol family 16 [ 0.140784] audit: initializing netlink subsys (disabled) [ 0.140791] audit: type=2000 audit(1576677512.040:1): state=initialized audit_enabled=0 res=1 [ 0.140791] EISA bus registered [ 0.140791] cpuidle: using governor ladder [ 0.140791] cpuidle: using governor menu [ 0.140791] Simple Boot Flag at 0x47 set to 0x80 [ 0.140791] ACPI: bus type PCI registered [ 0.140791] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.140791] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.140791] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.140791] PCI: Using configuration type 1 for base access [ 0.140802] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.141064] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.141064] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.141064] ACPI: Added _OSI(Module Device) [ 0.141064] ACPI: Added _OSI(Processor Device) [ 0.141064] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.141064] ACPI: Added _OSI(Processor Aggregator Device) [ 0.141064] ACPI: Added _OSI(Linux-Dell-Video) [ 0.141064] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.141064] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.176494] ACPI: 11 ACPI AML tables successfully acquired and loaded [ 0.176764] ACPI Error: No pointer back to namespace node in package 00000000802827a4 (20190703/dsargs-301) [ 0.177195] ACPI Error: No pointer back to namespace node in package 00000000c55c9823 (20190703/dsargs-301) [ 0.177386] ACPI Error: No pointer back to namespace node in package 00000000a7ac9807 (20190703/dsargs-301) [ 0.181634] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.187199] ACPI: Dynamic OEM Table Load: [ 0.187204] ACPI: SSDT 0xFFFFA0AB23BB2800 00058B (v02 PmRef Cpu0Ist 00003000 INTL 20160422) [ 0.187624] ACPI Error: No pointer back to namespace node in package 00000000802827a4 (20190703/dsargs-301) [ 0.187983] ACPI Error: No pointer back to namespace node in package 00000000c55c9823 (20190703/dsargs-301) [ 0.188058] ACPI Error: No pointer back to namespace node in package 00000000a7ac9807 (20190703/dsargs-301) [ 0.188446] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked [ 0.189404] ACPI: Dynamic OEM Table Load: [ 0.189408] ACPI: SSDT 0xFFFFA0AB23787C00 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) [ 0.189714] ACPI Error: No pointer back to namespace node in package 00000000802827a4 (20190703/dsargs-301) [ 0.190073] ACPI Error: No pointer back to namespace node in package 00000000c55c9823 (20190703/dsargs-301) [ 0.190148] ACPI Error: No pointer back to namespace node in package 00000000a7ac9807 (20190703/dsargs-301) [ 0.190604] ACPI: Dynamic OEM Table Load: [ 0.190607] ACPI: SSDT 0xFFFFA0AB23B91240 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) [ 0.190862] ACPI Error: No pointer back to namespace node in package 00000000802827a4 (20190703/dsargs-301) [ 0.191219] ACPI Error: No pointer back to namespace node in package 00000000c55c9823 (20190703/dsargs-301) [ 0.191293] ACPI Error: No pointer back to namespace node in package 00000000a7ac9807 (20190703/dsargs-301) [ 0.191734] ACPI: Dynamic OEM Table Load: [ 0.191737] ACPI: SSDT 0xFFFFA0AB23BB4000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422) [ 0.191987] ACPI Error: No pointer back to namespace node in package 00000000802827a4 (20190703/dsargs-301) [ 0.192344] ACPI Error: No pointer back to namespace node in package 00000000c55c9823 (20190703/dsargs-301) [ 0.192423] ACPI Error: No pointer back to namespace node in package 00000000a7ac9807 (20190703/dsargs-301) [ 0.193217] ACPI: Dynamic OEM Table Load: [ 0.193223] ACPI: SSDT 0xFFFFA0AB23BFD000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422) [ 0.194147] ACPI Error: No pointer back to namespace node in package 00000000802827a4 (20190703/dsargs-301) [ 0.194504] ACPI Error: No pointer back to namespace node in package 00000000c55c9823 (20190703/dsargs-301) [ 0.194579] ACPI Error: No pointer back to namespace node in package 00000000a7ac9807 (20190703/dsargs-301) [ 0.195049] ACPI: Dynamic OEM Table Load: [ 0.195052] ACPI: SSDT 0xFFFFA0AB23784000 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) [ 0.195378] ACPI Error: No pointer back to namespace node in package 00000000802827a4 (20190703/dsargs-301) [ 0.195736] ACPI Error: No pointer back to namespace node in package 00000000c55c9823 (20190703/dsargs-301) [ 0.195811] ACPI Error: No pointer back to namespace node in package 00000000a7ac9807 (20190703/dsargs-301) [ 0.196286] ACPI: Dynamic OEM Table Load: [ 0.196289] ACPI: SSDT 0xFFFFA0AB23786800 00030A (v02 PmRef ApCst 00003000 INTL 20160422) [ 0.196624] ACPI Error: No pointer back to namespace node in package 00000000802827a4 (20190703/dsargs-301) [ 0.196982] ACPI Error: No pointer back to namespace node in package 00000000c55c9823 (20190703/dsargs-301) [ 0.197058] ACPI Error: No pointer back to namespace node in package 00000000a7ac9807 (20190703/dsargs-301) [ 0.199889] ACPI: EC: EC started [ 0.199889] ACPI: EC: interrupt blocked [ 0.206436] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC [ 0.206437] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.206438] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions [ 0.206438] ACPI: Interpreter enabled [ 0.206475] ACPI: (supports S0 S3 S4 S5) [ 0.206480] ACPI: Using IOAPIC for interrupt routing [ 0.206513] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.207137] ACPI: Enabled 7 GPEs in block 00 to 7F [ 0.235980] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.235985] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.237849] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.238443] PCI host bridge to bus 0000:00 [ 0.238445] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.238445] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.238446] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.238447] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.238447] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.238448] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.238449] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.238449] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.238450] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.238451] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.238451] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.238452] pci_bus 0000:00: root bus resource [mem 0x8f800000-0xdfffffff window] [ 0.238453] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 0.238454] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.238462] pci 0000:00:00.0: [8086:5914] type 00 class 0x060000 [ 0.238573] pci 0000:00:02.0: [8086:5917] type 00 class 0x030000 [ 0.238582] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd0ffffff 64bit] [ 0.238588] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.238591] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.238603] pci 0000:00:02.0: BAR 2: assigned to efifb [ 0.238726] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000 [ 0.238738] pci 0000:00:04.0: reg 0x10: [mem 0xd1320000-0xd1327fff 64bit] [ 0.238933] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 [ 0.238955] pci 0000:00:14.0: reg 0x10: [mem 0xd1310000-0xd131ffff 64bit] [ 0.239022] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.239210] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 [ 0.239231] pci 0000:00:14.2: reg 0x10: [mem 0xd1337000-0xd1337fff 64bit] [ 0.239478] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 [ 0.239741] pci 0000:00:15.0: reg 0x10: [mem 0xd1336000-0xd1336fff 64bit] [ 0.240716] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 [ 0.240743] pci 0000:00:16.0: reg 0x10: [mem 0xd1335000-0xd1335fff 64bit] [ 0.240818] pci 0000:00:16.0: PME# supported from D3hot [ 0.240976] pci 0000:00:17.0: [8086:282a] type 00 class 0x010400 [ 0.240994] pci 0000:00:17.0: reg 0x10: [mem 0xd1330000-0xd1331fff] [ 0.241001] pci 0000:00:17.0: reg 0x14: [mem 0xd1334000-0xd13340ff] [ 0.241008] pci 0000:00:17.0: reg 0x18: [io 0xf090-0xf097] [ 0.241015] pci 0000:00:17.0: reg 0x1c: [io 0xf080-0xf083] [ 0.241022] pci 0000:00:17.0: reg 0x20: [io 0xf060-0xf07f] [ 0.241030] pci 0000:00:17.0: reg 0x24: [mem 0xd1333000-0xd13337ff] [ 0.241070] pci 0000:00:17.0: PME# supported from D3hot [ 0.241208] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 [ 0.241288] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.241467] pci 0000:00:1c.5: [8086:9d15] type 01 class 0x060400 [ 0.241546] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.241714] pci 0000:00:1f.0: [8086:9d4e] type 00 class 0x060100 [ 0.241900] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 [ 0.241914] pci 0000:00:1f.2: reg 0x10: [mem 0xd132c000-0xd132ffff] [ 0.242069] pci 0000:00:1f.3: [8086:9d71] type 00 class 0x040300 [ 0.242094] pci 0000:00:1f.3: reg 0x10: [mem 0xd1328000-0xd132bfff 64bit] [ 0.242120] pci 0000:00:1f.3: reg 0x20: [mem 0xd1300000-0xd130ffff 64bit] [ 0.242167] pci 0000:00:1f.3: PME# supported from D3hot D3cold [ 0.242370] pci 0000:00:1f.4: [8086:9d23] type 00 class 0x0c0500 [ 0.242430] pci 0000:00:1f.4: reg 0x10: [mem 0xd1332000-0xd13320ff 64bit] [ 0.242501] pci 0000:00:1f.4: reg 0x20: [io 0xf040-0xf05f] [ 0.242762] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.242799] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff] [ 0.242830] pci 0000:01:00.0: reg 0x18: [mem 0xd1204000-0xd1204fff 64bit] [ 0.242851] pci 0000:01:00.0: reg 0x20: [mem 0xd1200000-0xd1203fff 64bit pref] [ 0.242962] pci 0000:01:00.0: supports D1 D2 [ 0.242963] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.243117] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.243119] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.243121] pci 0000:00:1c.0: bridge window [mem 0xd1200000-0xd12fffff] [ 0.243340] pci 0000:02:00.0: [168c:0042] type 00 class 0x028000 [ 0.243401] pci 0000:02:00.0: reg 0x10: [mem 0xd1000000-0xd11fffff 64bit] [ 0.243625] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.243931] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.243934] pci 0000:00:1c.5: bridge window [mem 0xd1000000-0xd11fffff] [ 0.245773] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.245825] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.245876] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.245927] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.245977] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.246028] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.246078] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.246129] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.250329] ACPI: EC: interrupt unblocked [ 0.250329] ACPI: EC: event unblocked [ 0.250329] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930 [ 0.250329] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events [ 0.250333] SCSI subsystem initialized [ 0.250333] libata version 3.00 loaded. [ 0.250333] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.250333] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.250333] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.250333] vgaarb: loaded [ 0.250333] ACPI: bus type USB registered [ 0.250333] usbcore: registered new interface driver usbfs [ 0.250333] usbcore: registered new interface driver hub [ 0.250333] usbcore: registered new device driver usb [ 0.250333] pps_core: LinuxPPS API ver. 1 registered [ 0.250333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.250333] PTP clock support registered [ 0.250333] EDAC MC: Ver: 3.0.0 [ 0.250333] Registered efivars operations [ 0.252567] PCI: Using ACPI for IRQ routing [ 0.282350] PCI: pci_cache_line_size set to 64 bytes [ 0.282713] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] [ 0.282714] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.282714] e820: reserve RAM buffer [mem 0x7adea000-0x7bffffff] [ 0.282715] e820: reserve RAM buffer [mem 0x8a23b000-0x8bffffff] [ 0.282715] e820: reserve RAM buffer [mem 0x8b5ff000-0x8bffffff] [ 0.282716] e820: reserve RAM buffer [mem 0x26f800000-0x26fffffff] [ 0.282786] NetLabel: Initializing [ 0.282786] NetLabel: domain hash size = 128 [ 0.282786] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.282796] NetLabel: unlabeled traffic allowed by default [ 0.282804] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.282804] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 0.285403] clocksource: Switched to clocksource tsc-early [ 0.292937] VFS: Disk quotas dquot_6.6.0 [ 0.292949] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.292971] *** VALIDATE hugetlbfs *** [ 0.293034] AppArmor: AppArmor Filesystem Enabled [ 0.293058] pnp: PnP ACPI init [ 0.293333] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.293334] system 00:00: [io 0xffff] has been reserved [ 0.293335] system 00:00: [io 0xffff] has been reserved [ 0.293336] system 00:00: [io 0xffff] has been reserved [ 0.293337] system 00:00: [io 0x1800-0x18fe] has been reserved [ 0.293337] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.293341] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.293426] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.293458] system 00:02: [io 0x1854-0x1857] has been reserved [ 0.293460] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.293934] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.293949] pnp 00:04: Plug and Play ACPI device, IDs DLL0810 PNP0f13 (active) [ 0.294170] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.294171] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.294172] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.294173] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved [ 0.294173] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.294174] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.294175] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.294177] system 00:05: [mem 0xff000000-0xffffffff] has been reserved [ 0.294178] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.294179] system 00:05: [mem 0xdffe0000-0xdfffffff] has been reserved [ 0.294182] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294214] system 00:06: [mem 0xfd000000-0xfdabffff] has been reserved [ 0.294215] system 00:06: [mem 0xfdad0000-0xfdadffff] has been reserved [ 0.294216] system 00:06: [mem 0xfdb00000-0xfdffffff] has been reserved [ 0.294217] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved [ 0.294217] system 00:06: [mem 0xfe036000-0xfe03bfff] has been reserved [ 0.294218] system 00:06: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 0.294219] system 00:06: [mem 0xfe410000-0xfe7fffff] has been reserved [ 0.294221] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.294477] system 00:07: [io 0xff00-0xfffe] has been reserved [ 0.294479] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.295471] system 00:08: [mem 0xfe029000-0xfe029fff] has been reserved [ 0.295471] system 00:08: [mem 0xfe028000-0xfe028fff] has been reserved [ 0.295473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300378] pnp: PnP ACPI: found 9 devices [ 0.301246] thermal_sys: Registered thermal governor 'fair_share' [ 0.301247] thermal_sys: Registered thermal governor 'bang_bang' [ 0.301247] thermal_sys: Registered thermal governor 'step_wise' [ 0.301248] thermal_sys: Registered thermal governor 'user_space' [ 0.301248] thermal_sys: Registered thermal governor 'power_allocator' [ 0.305739] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.305765] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.305767] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff] [ 0.305771] pci 0000:00:1c.0: bridge window [mem 0xd1200000-0xd12fffff] [ 0.305776] pci 0000:00:1c.5: PCI bridge to [bus 02] [ 0.305779] pci 0000:00:1c.5: bridge window [mem 0xd1000000-0xd11fffff] [ 0.305785] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.305785] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.305786] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.305787] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.305788] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.305788] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.305789] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.305790] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.305790] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.305791] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.305792] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.305793] pci_bus 0000:00: resource 15 [mem 0x8f800000-0xdfffffff window] [ 0.305793] pci_bus 0000:00: resource 16 [mem 0xfd000000-0xfe7fffff window] [ 0.305794] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.305795] pci_bus 0000:01: resource 1 [mem 0xd1200000-0xd12fffff] [ 0.305796] pci_bus 0000:02: resource 1 [mem 0xd1000000-0xd11fffff] [ 0.305931] NET: Registered protocol family 2 [ 0.306025] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.306077] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.306212] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.306272] TCP: Hash tables configured (established 65536 bind 65536) [ 0.306310] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.306351] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.306414] NET: Registered protocol family 1 [ 0.306417] NET: Registered protocol family 44 [ 0.306425] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.306801] PCI: CLS 0 bytes, default 64 [ 0.306830] Trying to unpack rootfs image as initramfs... [ 0.406747] Freeing initrd memory: 46704K [ 0.406877] DMAR: ACPI device "device:6b" under DMAR at fed91000 as 00:15.0 [ 0.428458] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.428460] software IO TLB: mapped [mem 0x82fd2000-0x86fd2000] (64MB) [ 0.428826] check: Scanning for low memory corruption every 60 seconds [ 0.431644] Initialise system trusted keyrings [ 0.431653] Key type blacklist registered [ 0.431691] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.433557] zbud: loaded [ 0.434073] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.434276] fuse: init (API version 7.31) [ 0.434415] Platform Keyring initialized [ 0.441432] Key type asymmetric registered [ 0.441436] Asymmetric key parser 'x509' registered [ 0.441456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.441510] io scheduler mq-deadline registered [ 0.442034] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 [ 0.442101] pcieport 0000:00:1c.0: AER: enabled with IRQ 122 [ 0.442413] pcieport 0000:00:1c.5: PME: Signaling with IRQ 123 [ 0.442500] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.442582] efifb: probing for efifb [ 0.442616] efifb: framebuffer at 0xc0000000, using 8128k, total 8128k [ 0.442618] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.442618] efifb: scrolling: redraw [ 0.442620] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.442709] Console: switching to colour frame buffer device 240x67 [ 0.442771] fb0: EFI VGA frame buffer device [ 0.442782] intel_idle: MWAIT substates: 0x11142120 [ 0.442783] intel_idle: v0.4.1 model 0x8E [ 0.443399] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.446543] ACPI: AC Adapter [AC] (off-line) [ 0.446642] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.446659] ACPI: Lid Switch [LID0] [ 0.446700] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.446710] ACPI: Power Button [PBTN] [ 0.446757] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2 [ 0.446764] ACPI: Sleep Button [SBTN] [ 0.446803] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 0.446811] ACPI: Power Button [PWRF] [ 0.451133] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.451135] ACPI: Thermal Zone [THM] (25 C) [ 0.451367] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.454050] Linux agpgart interface v0.103 [ 0.493298] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.519445] loop: module loaded [ 0.519660] libphy: Fixed MDIO Bus: probed [ 0.519661] tun: Universal TUN/TAP device driver, 1.6 [ 0.519712] PPP generic driver version 2.4.2 [ 0.519773] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.519775] ehci-pci: EHCI PCI platform driver [ 0.519785] ehci-platform: EHCI generic platform driver [ 0.519796] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.519798] ohci-pci: OHCI PCI platform driver [ 0.519804] ohci-platform: OHCI generic platform driver [ 0.519810] uhci_hcd: USB Universal Host Controller Interface driver [ 0.520006] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.520011] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 0.521083] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 [ 0.521087] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 0.521262] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03 [ 0.521263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.521264] usb usb1: Product: xHCI Host Controller [ 0.521265] usb usb1: Manufacturer: Linux 5.3.0-24-generic xhci-hcd [ 0.521266] usb usb1: SerialNumber: 0000:00:14.0 [ 0.521373] hub 1-0:1.0: USB hub found [ 0.521388] hub 1-0:1.0: 12 ports detected [ 0.523273] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 0.523276] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 0.523278] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 0.523309] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03 [ 0.523310] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.523311] usb usb2: Product: xHCI Host Controller [ 0.523312] usb usb2: Manufacturer: Linux 5.3.0-24-generic xhci-hcd [ 0.523313] usb usb2: SerialNumber: 0000:00:14.0 [ 0.523412] hub 2-0:1.0: USB hub found [ 0.523422] hub 2-0:1.0: 6 ports detected [ 0.524462] usb: port power management may be unreliable [ 0.524842] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.528111] i8042: Warning: Keylock active [ 0.529570] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.529574] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.529757] mousedev: PS/2 mouse device common for all mice [ 0.530164] rtc_cmos 00:01: RTC can wake from S4 [ 0.530742] rtc_cmos 00:01: registered as rtc0 [ 0.530777] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.530784] i2c /dev entries driver [ 0.530849] device-mapper: uevent: version 1.0.3 [ 0.530928] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.530944] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com [ 0.531167] platform eisa.0: Probing EISA bus 0 [ 0.531170] platform eisa.0: EISA: Cannot allocate resource for mainboard [ 0.531172] platform eisa.0: Cannot allocate resource for EISA slot 1 [ 0.531173] platform eisa.0: Cannot allocate resource for EISA slot 2 [ 0.531173] platform eisa.0: Cannot allocate resource for EISA slot 3 [ 0.531174] platform eisa.0: Cannot allocate resource for EISA slot 4 [ 0.531175] platform eisa.0: Cannot allocate resource for EISA slot 5 [ 0.531176] platform eisa.0: Cannot allocate resource for EISA slot 6 [ 0.531177] platform eisa.0: Cannot allocate resource for EISA slot 7 [ 0.531178] platform eisa.0: Cannot allocate resource for EISA slot 8 [ 0.531178] platform eisa.0: EISA: Detected 0 cards [ 0.531182] intel_pstate: Intel P-state driver initializing [ 0.532197] intel_pstate: HWP enabled [ 0.532276] ledtrig-cpu: registered to indicate activity on CPUs [ 0.532278] EFI Variables Facility v0.08 2004-May-17 [ 0.541363] intel_pmc_core INT33A1:00: initialized [ 0.541554] NET: Registered protocol family 10 [ 0.548776] Segment Routing with IPv6 [ 0.548793] NET: Registered protocol family 17 [ 0.548969] Key type dns_resolver registered [ 0.549775] RAS: Correctable Errors collector initialized. [ 0.549842] microcode: sig=0x806ea, pf=0x80, revision=0xca [ 0.550136] microcode: Microcode Update Driver: v2.2. [ 0.550145] sched_clock: Marking stable (549736809, 397176)->(551948414, -1814429) [ 0.550424] registered taskstats version 1 [ 0.550432] Loading compiled-in X.509 certificates [ 0.552152] Loaded X.509 cert 'Build time autogenerated kernel key: ac8e946e076fc9670072220958f4bcb775ad68ce' [ 0.552179] zswap: loaded using pool lzo/zbud [ 0.558399] Key type big_key registered [ 0.558403] Key type trusted registered [ 0.562056] Key type encrypted registered [ 0.562059] AppArmor: AppArmor sha1 policy hashing enabled [ 0.562516] integrity: Loading X.509 certificate: UEFI:db [ 0.562532] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7' [ 0.562532] integrity: Loading X.509 certificate: UEFI:db [ 0.562549] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' [ 0.562549] integrity: Loading X.509 certificate: UEFI:db [ 0.562562] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' [ 0.563176] ima: Allocated hash algorithm: sha1 [ 0.764701] No architecture policies found [ 0.764718] evm: Initialising EVM extended attributes: [ 0.764718] evm: security.selinux [ 0.764719] evm: security.SMACK64 [ 0.764719] evm: security.SMACK64EXEC [ 0.764719] evm: security.SMACK64TRANSMUTE [ 0.764720] evm: security.SMACK64MMAP [ 0.764720] evm: security.apparmor [ 0.764721] evm: security.ima [ 0.764721] evm: security.capability [ 0.764722] evm: HMAC attrs: 0x1 [ 0.765581] PM: Magic number: 15:211:989 [ 0.765586] machinecheck machinecheck2: hash matches [ 0.765642] memory memory32: hash matches [ 0.765839] rtc_cmos 00:01: setting system clock to 2019-12-18T13:58:33 UTC (1576677513) [ 0.767107] Freeing unused decrypted memory: 2040K [ 0.767501] Freeing unused kernel image memory: 2668K [ 0.767605] Write protecting the kernel read-only data: 22528k [ 0.768192] Freeing unused kernel image memory: 2008K [ 0.768493] Freeing unused kernel image memory: 1412K [ 0.776001] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.776003] x86/mm: Checking user space page tables [ 0.783308] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.783309] Run /init as init process [ 0.850982] hidraw: raw HID events driver (C) Jiri Kosina [ 0.851180] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found [ 0.852778] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) [ 0.853011] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 0.853052] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 0.853091] ahci 0000:00:17.0: version 3.0 [ 0.853257] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled [ 0.856396] usb 1-5: new high-speed USB device number 2 using xhci_hcd [ 0.858646] libphy: r8169: probed [ 0.858814] r8169 0000:01:00.0 eth0: RTL8106e, 54:bf:64:04:bf:e5, XID 449, IRQ 126 [ 0.864422] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl RAID mode [ 0.864430] ahci 0000:00:17.0: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst [ 0.864997] scsi host0: ahci [ 0.866682] scsi host1: ahci [ 0.866727] ata1: SATA max UDMA/133 abar m2048@0xd1333000 port 0xd1333100 irq 125 [ 0.866729] ata2: SATA max UDMA/133 abar m2048@0xd1333000 port 0xd1333180 irq 125 [ 0.867440] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 0.891105] i2c_hid i2c-DELL0810:00: i2c-DELL0810:00 supply vdd not found, using dummy regulator [ 0.891117] i2c_hid i2c-DELL0810:00: i2c-DELL0810:00 supply vddl not found, using dummy regulator [ 1.021095] usb 1-5: New USB device found, idVendor=0c45, idProduct=6a06, bcdDevice=64.26 [ 1.021097] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 1.021098] usb 1-5: Product: Integrated_Webcam_HD [ 1.021099] usb 1-5: Manufacturer: CNFFH37N495420192A92 [ 1.148710] usb 1-6: new high-speed USB device number 3 using xhci_hcd [ 1.181310] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.192694] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.192697] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.192698] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.230071] ata1.00: ATA-10: ST1000LM035-1RK172, SDM3, max UDMA/133 [ 1.230073] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 1.253958] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.253960] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.253961] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.291522] ata1.00: configured for UDMA/133 [ 1.291722] scsi 0:0:0:0: Direct-Access ATA ST1000LM035-1RK1 SDM3 PQ: 0 ANSI: 5 [ 1.292008] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 1.292009] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.292014] sd 0:0:0:0: [sda] Write Protect is off [ 1.292015] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.292022] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.292049] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.292652] usb 1-6: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 1.292653] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.292654] usb 1-6: Product: USB2.0-CRW [ 1.292654] usb 1-6: Manufacturer: Generic [ 1.292655] usb 1-6: SerialNumber: 20100201396000000 [ 1.355697] sda: sda1 sda2 [ 1.356200] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.420654] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 1.440679] tsc: Refined TSC clocksource calibration: 1799.999 MHz [ 1.440686] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19f228ab7a2, max_idle_ns: 440795289252 ns [ 1.440786] clocksource: Switched to clocksource tsc [ 1.570875] usb 1-7: New USB device found, idVendor=0cf3, idProduct=e009, bcdDevice= 0.01 [ 1.570876] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.577111] usbcore: registered new interface driver rtsx_usb [ 1.605389] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.609302] ata2.00: ATAPI: PLDS DVD+/-RW DU-8A5LH, 6D1M, max UDMA/133 [ 1.620676] ata2.00: configured for UDMA/133 [ 1.637927] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DU-8A5LH 6D1M PQ: 0 ANSI: 5 [ 1.710171] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.710173] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.710419] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.710527] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.714116] input: DELL0810:00 044E:120A Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL0810:00/0018:044E:120A.0001/input/input7 [ 1.714365] input: DELL0810:00 044E:120A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL0810:00/0018:044E:120A.0001/input/input8 [ 1.714599] input: DELL0810:00 044E:120A as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL0810:00/0018:044E:120A.0001/input/input9 [ 1.714701] hid-generic 0018:044E:120A.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0810:00 044E:120A] on i2c-DELL0810:00 [ 1.788236] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input6 [ 2.278434] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.087764] systemd[1]: Inserted module 'autofs4' [ 4.329157] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 4.348764] systemd[1]: Detected architecture x86-64. [ 4.417426] systemd[1]: Set hostname to . [ 4.429612] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument [ 5.855402] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly. [ 6.287578] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.287613] systemd[1]: Reached target User and Group Name Lookups. [ 6.288241] systemd[1]: Created slice User and Session Slice. [ 6.288347] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.288397] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.441979] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 6.721086] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 6.808520] lp: driver loaded but no devices found [ 6.869354] systemd-journald[353]: Received request to flush runtime journal from PID 1 [ 6.904965] ppdev: user-space parallel port driver [ 8.351510] input: Intel HID events as /devices/platform/INT33D5:00/input/input10 [ 8.351704] intel-hid INT33D5:00: platform supports 5 button array [ 8.351739] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input11 [ 8.382759] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20190703/nsprepkg-94) [ 8.452021] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12 [ 8.511599] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer [ 8.511600] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 8.511600] RAPL PMU: hw unit of domain package 2^-14 Joules [ 8.511600] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 8.511601] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 8.511601] RAPL PMU: hw unit of domain psys 2^-14 Joules [ 9.575070] idma64 idma64.0: Found Intel integrated DMA 64-bit [ 9.622553] cryptd: max_cpu_qlen set to 1000 [ 9.648838] intel_rapl_common: Found RAPL domain package [ 9.648839] intel_rapl_common: Found RAPL domain core [ 9.648840] intel_rapl_common: Found RAPL domain uncore [ 9.648840] intel_rapl_common: Found RAPL domain dram [ 9.649234] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002) [ 9.649460] ACPI Error: No pointer back to namespace node in package 00000000802827a4 (20190703/dsargs-301) [ 9.649467] No Local Variables are initialized for Method [PPCC] [ 9.649468] No Arguments are initialized for method [PPCC] [ 9.649468] ACPI Error: Aborting method \_SB.PCI0.B0D4.PPCC due to previous error (AE_AML_INTERNAL) (20190703/psparse-529) [ 9.734517] input: DELL0810:00 044E:120A Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-1/i2c-DELL0810:00/0018:044E:120A.0001/input/input14 [ 9.734576] hid-multitouch 0018:044E:120A.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL0810:00 044E:120A] on i2c-DELL0810:00 [ 9.803547] mei_me 0000:00:16.0: enabling device (0000 -> 0002) [ 10.006948] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 10.006949] fb0: switching to inteldrmfb from EFI VGA [ 10.007019] Console: switching to colour dummy device 80x25 [ 10.007044] i915 0000:00:02.0: vgaarb: deactivate vga console [ 10.008033] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 10.008034] [drm] Driver supports precise vblank timestamp query. [ 10.008417] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 10.028387] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0 [ 10.030383] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 10.031094] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16 [ 10.105466] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 10.145818] fbcon: i915drmfb (fb0) is primary device [ 10.145860] Console: switching to colour frame buffer device 240x67 [ 10.145889] i915 0000:00:02.0: fb0: i915drmfb frame buffer device [ 10.321007] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4) [ 10.371036] mc: Linux media interface: v0.10 [ 10.385142] Bluetooth: Core ver 2.22 [ 10.385162] NET: Registered protocol family 31 [ 10.385162] Bluetooth: HCI device and connection manager initialized [ 10.385167] Bluetooth: HCI socket layer initialized [ 10.385168] Bluetooth: L2CAP socket layer initialized [ 10.385170] Bluetooth: SCO socket layer initialized [ 10.391375] videodev: Linux video capture interface: v2.00 [ 10.487380] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 10.488830] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 10.495091] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) [ 10.495284] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 10.668000] AVX2 version of gcm_enc/dec engaged. [ 10.668001] AES CTR mode by8 optimization enabled [ 10.761360] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3246: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 10.761362] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 10.761363] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 10.761363] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 10.761364] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 10.761365] snd_hda_codec_realtek hdaudioC0D0: Headset Mic=0x19 [ 10.761366] snd_hda_codec_realtek hdaudioC0D0: Headphone Mic=0x1a [ 10.761366] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12 [ 10.852769] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input17 [ 10.852873] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18 [ 10.853070] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 [ 10.853155] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 [ 10.853201] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 [ 10.853250] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 [ 11.530959] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6a06) [ 11.539793] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized! [ 11.539794] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized! [ 11.539795] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized! [ 11.539795] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized! [ 11.539886] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input23 [ 11.539974] usbcore: registered new interface driver uvcvideo [ 11.539974] USB Video Class driver (1.1.1) [ 11.556115] usbcore: registered new interface driver btusb [ 11.586248] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) [ 11.586914] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 [ 11.718760] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 11.718762] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 11.776559] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 12.001927] ath10k_pci 0000:02:00.0: qca9377 hw1.1 target 0x05020001 chip_id 0x003821ff sub 1028:1810 [ 12.001929] ath10k_pci 0000:02:00.0: kconfig debug 0 debugfs 1 tracing 1 dfs 0 testmode 0 [ 12.002341] ath10k_pci 0000:02:00.0: firmware ver WLAN.TF.2.1-00021-QCARMSWP-1 api 6 features wowlan,ignore-otp crc32 42e41877 [ 12.082814] ath10k_pci 0000:02:00.0: board_file api 2 bmi_id N/A crc32 8aedfa4a [ 12.159208] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 12.185009] ath10k_pci 0000:02:00.0: htt-ver 3.56 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 [ 12.278261] ath: EEPROM regdomain: 0x6c [ 12.278262] ath: EEPROM indicates we should expect a direct regpair map [ 12.278272] ath: Country alpha2 being used: 00 [ 12.278273] ath: Regpair used: 0x6c [ 12.280384] ath10k_pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 17.006768] audit: type=1400 audit(1576677529.735:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=746 comm="apparmor_parser" [ 17.009022] audit: type=1400 audit(1576677529.739:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=749 comm="apparmor_parser" [ 17.080612] audit: type=1400 audit(1576677529.811:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=750 comm="apparmor_parser" [ 17.090100] audit: type=1400 audit(1576677529.819:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=751 comm="apparmor_parser" [ 17.090103] audit: type=1400 audit(1576677529.819:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=751 comm="apparmor_parser" [ 17.094934] audit: type=1400 audit(1576677529.823:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=754 comm="apparmor_parser" [ 17.116923] audit: type=1400 audit(1576677529.847:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=744 comm="apparmor_parser" [ 17.116927] audit: type=1400 audit(1576677529.847:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=741 comm="apparmor_parser" [ 17.116929] audit: type=1400 audit(1576677529.847:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=741 comm="apparmor_parser" [ 17.129039] audit: type=1400 audit(1576677529.859:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=743 comm="apparmor_parser" [ 21.950705] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.950706] Bluetooth: BNEP filters: protocol multicast [ 21.950712] Bluetooth: BNEP socket layer initialized [ 26.514700] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 26.777516] r8169 0000:01:00.0 enp1s0: Link is Down [ 27.022373] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 32.233419] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 32.267623] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 32.372555] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 32.476485] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 32.580494] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 32.925194] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 32.956879] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 32.957737] wlp2s0: authenticated [ 32.960516] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 32.961611] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 32.961637] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 32.961641] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 32.964180] wlp2s0: associated [ 32.964265] ath: EEPROM regdomain: 0x8348 [ 32.964266] ath: EEPROM indicates we should expect a country code [ 32.964267] ath: doing EEPROM country->regdmn map search [ 32.964268] ath: country maps to regdmn code: 0x3a [ 32.964268] ath: Country alpha2 being used: US [ 32.964269] ath: Regpair used: 0x3a [ 32.964270] ath: regdomain 0x8348 dynamically updated by country element [ 33.067525] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 33.116587] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 43.211725] rfkill: input handler disabled [ 84.318499] rfkill: input handler enabled [ 84.840817] Bluetooth: RFCOMM TTY layer initialized [ 84.840839] Bluetooth: RFCOMM socket layer initialized [ 84.840845] Bluetooth: RFCOMM ver 1.11 [ 91.742663] rfkill: input handler disabled [ 102.997680] kauditd_printk_skb: 37 callbacks suppressed [ 102.997683] audit: type=1400 audit(1576677615.457:49): apparmor="DENIED" operation="file_lock" profile="/usr/share/hplip/systray.py" name="/etc/xdg/Trolltech.conf" pid=1822 comm="python" requested_mask="k" denied_mask="k" fsuid=1000 ouid=0 [ 404.650355] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 404.657234] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 404.691701] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 404.793765] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 404.897717] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 405.001768] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 405.329869] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 405.377567] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 405.378386] wlp2s0: authenticated [ 405.381733] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 405.382807] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 405.382834] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 405.382839] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 405.385364] wlp2s0: associated [ 405.385776] ath: EEPROM regdomain: 0x8348 [ 405.385778] ath: EEPROM indicates we should expect a country code [ 405.385781] ath: doing EEPROM country->regdmn map search [ 405.385785] ath: country maps to regdmn code: 0x3a [ 405.385787] ath: Country alpha2 being used: US [ 405.385789] ath: Regpair used: 0x3a [ 405.385793] ath: regdomain 0x8348 dynamically updated by country element [ 405.450399] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 711.692423] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 711.698971] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 711.732651] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 711.834180] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 711.938206] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 712.042205] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 712.368508] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 712.415905] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 712.416666] wlp2s0: authenticated [ 712.418163] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 712.419205] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 712.419215] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 712.419216] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 712.421874] wlp2s0: associated [ 712.421981] ath: EEPROM regdomain: 0x8348 [ 712.421982] ath: EEPROM indicates we should expect a country code [ 712.421982] ath: doing EEPROM country->regdmn map search [ 712.421983] ath: country maps to regdmn code: 0x3a [ 712.421984] ath: Country alpha2 being used: US [ 712.421984] ath: Regpair used: 0x3a [ 712.421985] ath: regdomain 0x8348 dynamically updated by country element [ 712.450604] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 1018.683032] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 1018.689264] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 1018.723017] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 1018.826664] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 1018.930642] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 1019.034691] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 1019.375334] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 1019.422773] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 1019.423545] wlp2s0: authenticated [ 1019.426612] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 1019.427641] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 1019.427678] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 1019.427679] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 1019.429816] wlp2s0: associated [ 1019.429995] ath: EEPROM regdomain: 0x8348 [ 1019.429995] ath: EEPROM indicates we should expect a country code [ 1019.429996] ath: doing EEPROM country->regdmn map search [ 1019.429996] ath: country maps to regdmn code: 0x3a [ 1019.429997] ath: Country alpha2 being used: US [ 1019.429997] ath: Regpair used: 0x3a [ 1019.429998] ath: regdomain 0x8348 dynamically updated by country element [ 1019.451169] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 1632.731229] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 1632.738235] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 1632.772544] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 1632.873462] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 1632.977475] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 1633.081476] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 1633.414247] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 1633.461679] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 1633.462495] wlp2s0: authenticated [ 1633.465467] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 1633.466574] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 1633.466596] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 1633.466598] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 1633.469571] wlp2s0: associated [ 1633.469950] ath: EEPROM regdomain: 0x8348 [ 1633.469952] ath: EEPROM indicates we should expect a country code [ 1633.469955] ath: doing EEPROM country->regdmn map search [ 1633.469958] ath: country maps to regdmn code: 0x3a [ 1633.469961] ath: Country alpha2 being used: US [ 1633.469963] ath: Regpair used: 0x3a [ 1633.469967] ath: regdomain 0x8348 dynamically updated by country element [ 1633.657518] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 2246.648289] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 2246.655008] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 2246.688874] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 2246.791868] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 2246.895818] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 2246.999750] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 2247.327650] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 2247.375708] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 2247.376516] wlp2s0: authenticated [ 2247.379717] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 2247.380893] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 2247.380918] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 2247.380921] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 2247.384121] wlp2s0: associated [ 2247.384425] ath: EEPROM regdomain: 0x8348 [ 2247.384428] ath: EEPROM indicates we should expect a country code [ 2247.384431] ath: doing EEPROM country->regdmn map search [ 2247.384434] ath: country maps to regdmn code: 0x3a [ 2247.384437] ath: Country alpha2 being used: US [ 2247.384439] ath: Regpair used: 0x3a [ 2247.384442] ath: regdomain 0x8348 dynamically updated by country element [ 2247.453605] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 3167.728769] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 3167.735634] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 3167.770033] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 3167.871337] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 3167.975334] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 3168.083335] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 3168.410466] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 3168.458174] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 3168.458937] wlp2s0: authenticated [ 3168.463289] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 3168.464382] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 3168.464408] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 3168.464411] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 3168.467603] wlp2s0: associated [ 3168.467880] ath: EEPROM regdomain: 0x8348 [ 3168.467882] ath: EEPROM indicates we should expect a country code [ 3168.467884] ath: doing EEPROM country->regdmn map search [ 3168.467887] ath: country maps to regdmn code: 0x3a [ 3168.467889] ath: Country alpha2 being used: US [ 3168.467891] ath: Regpair used: 0x3a [ 3168.467894] ath: regdomain 0x8348 dynamically updated by country element [ 3168.660407] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 3474.686233] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 3474.692996] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 3474.726650] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 3474.827425] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 3474.931477] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 3475.035467] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 3475.386928] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 3475.435170] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 3475.436017] wlp2s0: authenticated [ 3475.439458] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 3475.440542] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 3475.440568] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 3475.440571] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 3475.444104] wlp2s0: associated [ 3475.444481] ath: EEPROM regdomain: 0x8348 [ 3475.444483] ath: EEPROM indicates we should expect a country code [ 3475.444487] ath: doing EEPROM country->regdmn map search [ 3475.444490] ath: country maps to regdmn code: 0x3a [ 3475.444493] ath: Country alpha2 being used: US [ 3475.444495] ath: Regpair used: 0x3a [ 3475.444498] ath: regdomain 0x8348 dynamically updated by country element [ 3475.456049] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 4088.739086] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 4088.745553] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 4088.779767] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 4088.883407] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 4088.987388] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 4089.091390] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 4089.435556] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 4089.483432] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 4089.484226] wlp2s0: authenticated [ 4089.487390] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 4089.488512] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 4089.488533] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 4089.488535] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 4089.492112] wlp2s0: associated [ 4089.492469] ath: EEPROM regdomain: 0x8348 [ 4089.492472] ath: EEPROM indicates we should expect a country code [ 4089.492475] ath: doing EEPROM country->regdmn map search [ 4089.492478] ath: country maps to regdmn code: 0x3a [ 4089.492481] ath: Country alpha2 being used: US [ 4089.492483] ath: Regpair used: 0x3a [ 4089.492486] ath: regdomain 0x8348 dynamically updated by country element [ 4089.662126] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 4382.509892] perf: interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 4702.734810] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 4702.741369] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 4702.775096] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 4702.878989] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 4702.983018] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 4703.086937] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 4703.421716] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 4703.469465] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 4703.470297] wlp2s0: authenticated [ 4703.470971] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 4703.472528] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 4703.472548] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 4703.472550] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 4703.475610] wlp2s0: associated [ 4703.475807] ath: EEPROM regdomain: 0x8348 [ 4703.475808] ath: EEPROM indicates we should expect a country code [ 4703.475810] ath: doing EEPROM country->regdmn map search [ 4703.475812] ath: country maps to regdmn code: 0x3a [ 4703.475814] ath: Country alpha2 being used: US [ 4703.475815] ath: Regpair used: 0x3a [ 4703.475818] ath: regdomain 0x8348 dynamically updated by country element [ 4703.663222] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 5009.704854] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [ 5009.711016] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 5009.745016] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 5009.847366] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 5009.951359] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 5010.055359] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 5010.385873] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 5010.433211] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 5010.433977] wlp2s0: authenticated [ 5010.439302] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [ 5010.440319] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [ 5010.440327] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 5010.440327] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 5010.442811] wlp2s0: associated [ 5010.442986] ath: EEPROM regdomain: 0x8348 [ 5010.442987] ath: EEPROM indicates we should expect a country code [ 5010.442988] ath: doing EEPROM country->regdmn map search [ 5010.442989] ath: country maps to regdmn code: 0x3a [ 5010.442989] ath: Country alpha2 being used: US [ 5010.442990] ath: Regpair used: 0x3a [ 5010.442991] ath: regdomain 0x8348 dynamically updated by country element [ 5010.458946] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [ 5275.489437] PM: suspend entry (deep) [ 5275.879726] Filesystems sync: 0.390 seconds [ 5275.880353] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 5275.884511] OOM killer disabled. [ 5275.884512] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5275.886122] printk: Suspending console(s) (use no_console_suspend to debug) [ 5275.887454] wlp2s0: deauthenticating from e8:fc:af:fb:41:ff by local choice (Reason: 3=DEAUTH_LEAVING) [ 5276.022006] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 5276.065415] sd 0:0:0:0: [sda] Stopping disk [ 5277.009817] ACPI: EC: interrupt blocked [ 5277.050863] ACPI: Preparing to enter system sleep state S3 [ 5277.060759] ACPI: EC: event blocked [ 5277.060761] ACPI: EC: EC stopped [ 5277.060762] PM: Saving platform NVS memory [ 5277.060912] Disabling non-boot CPUs ... [ 5277.062673] smpboot: CPU 1 is now offline [ 5277.068132] smpboot: CPU 2 is now offline [ 5277.073374] smpboot: CPU 3 is now offline [ 5277.077556] IRQ 125: no longer affine to CPU4 [ 5277.078866] smpboot: CPU 4 is now offline [ 5277.080831] IRQ 123: no longer affine to CPU5 [ 5277.080834] IRQ 130: no longer affine to CPU5 [ 5277.081837] smpboot: CPU 5 is now offline [ 5277.083964] IRQ 122: no longer affine to CPU6 [ 5277.083971] IRQ 128: no longer affine to CPU6 [ 5277.084976] smpboot: CPU 6 is now offline [ 5277.087276] IRQ 124: no longer affine to CPU7 [ 5277.088286] smpboot: CPU 7 is now offline [ 5277.092607] ACPI: Low-level resume complete [ 5277.092683] ACPI: EC: EC started [ 5277.092683] PM: Restoring platform NVS memory [ 5277.094687] Enabling non-boot CPUs ... [ 5277.094734] x86: Booting SMP configuration: [ 5277.094735] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 5277.096238] microcode: sig=0x806ea, pf=0x80, revision=0xb4 [ 5277.097490] microcode: updated to revision 0xca, date = 2019-10-03 [ 5277.097752] CPU1 is up [ 5277.097781] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 5277.099599] CPU2 is up [ 5277.099625] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 5277.101448] CPU3 is up [ 5277.101474] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 5277.101832] microcode: sig=0x806ea, pf=0x80, revision=0xca [ 5277.102175] CPU4 is up [ 5277.102205] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 5277.102786] CPU5 is up [ 5277.102812] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 5277.103397] CPU6 is up [ 5277.103423] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 5277.104025] CPU7 is up [ 5277.106829] ACPI: Waking up from system sleep state S3 [ 5277.154949] ACPI: EC: interrupt unblocked [ 5277.222564] ACPI: EC: event unblocked [ 5277.222858] sd 0:0:0:0: [sda] Starting disk [ 5277.432793] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 5277.468852] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [ 5277.536846] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5277.539773] ata2.00: configured for UDMA/133 [ 5277.745114] usb 1-7: reset full-speed USB device number 4 using xhci_hcd [ 5278.021122] usb 1-6: reset high-speed USB device number 3 using xhci_hcd [ 5278.170856] OOM killer enabled. [ 5278.170858] Restarting tasks ... [ 5278.179464] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 5278.181824] done. [ 5278.220416] PM: suspend exit [ 5278.393718] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 5278.393720] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 5278.448538] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 5278.448963] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input25 [ 5279.520711] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5279.532708] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 5279.532713] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 5279.532717] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 5279.593702] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 5279.593705] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 5279.593707] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 5279.630716] ata1.00: configured for UDMA/133 [ 5280.003745] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 5280.269532] r8169 0000:01:00.0 enp1s0: Link is Down [ 5285.438713] wlp2s0: authenticate with e8:fc:af:fb:42:00 [ 5285.466272] wlp2s0: send auth to e8:fc:af:fb:42:00 (try 1/3) [ 5285.468004] wlp2s0: authenticated [ 5285.468731] wlp2s0: associate with e8:fc:af:fb:42:00 (try 1/3) [ 5285.472456] wlp2s0: RX AssocResp from e8:fc:af:fb:42:00 (capab=0x431 status=0 aid=7) [ 5285.472479] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 5285.472481] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 5285.475753] wlp2s0: associated [ 5285.476028] ath: EEPROM regdomain: 0x8348 [ 5285.476030] ath: EEPROM indicates we should expect a country code [ 5285.476032] ath: doing EEPROM country->regdmn map search [ 5285.476034] ath: country maps to regdmn code: 0x3a [ 5285.476036] ath: Country alpha2 being used: US [ 5285.476037] ath: Regpair used: 0x3a [ 5285.476040] ath: regdomain 0x8348 dynamically updated by country element [ 5285.523060] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 5285.663107] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:00 [ 5294.013086] wlp2s0: disconnect from AP e8:fc:af:fb:42:00 for new auth to e8:fc:af:fb:41:ff [ 5294.019733] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 5294.051844] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 5294.152838] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 2/3) [ 5294.256928] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 3/3) [ 5294.360830] wlp2s0: authentication with e8:fc:af:fb:41:ff timed out [ 5294.686838] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 5294.721330] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 5294.722078] wlp2s0: authenticated [ 5294.728874] wlp2s0: associate with e8:fc:af:fb:42:01 (try 1/3) [ 5294.730124] wlp2s0: RX AssocResp from e8:fc:af:fb:42:01 (capab=0x11 status=0 aid=5) [ 5294.730131] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 5294.730131] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 5294.733058] wlp2s0: associated [ 5294.733188] ath: EEPROM regdomain: 0x8348 [ 5294.733189] ath: EEPROM indicates we should expect a country code [ 5294.733189] ath: doing EEPROM country->regdmn map search [ 5294.733190] ath: country maps to regdmn code: 0x3a [ 5294.733191] ath: Country alpha2 being used: US [ 5294.733191] ath: Regpair used: 0x3a [ 5294.733193] ath: regdomain 0x8348 dynamically updated by country element [ 5294.747302] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:01 [ 6567.848982] perf: interrupt took too long (3183 > 3158), lowering kernel.perf_event_max_sample_rate to 62750 [ 6886.083028] PM: suspend entry (deep) [ 6886.907939] Filesystems sync: 0.824 seconds [ 6886.908795] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 6886.913135] OOM killer disabled. [ 6886.913137] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6886.914789] printk: Suspending console(s) (use no_console_suspend to debug) [ 6886.916172] wlp2s0: deauthenticating from e8:fc:af:fb:42:01 by local choice (Reason: 3=DEAUTH_LEAVING) [ 6887.050077] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6887.089608] sd 0:0:0:0: [sda] Stopping disk [ 6888.025852] ACPI: EC: interrupt blocked [ 6888.066892] ACPI: Preparing to enter system sleep state S3 [ 6888.076468] ACPI: EC: event blocked [ 6888.076470] ACPI: EC: EC stopped [ 6888.076471] PM: Saving platform NVS memory [ 6888.076619] Disabling non-boot CPUs ... [ 6888.078354] smpboot: CPU 1 is now offline [ 6888.082321] smpboot: CPU 2 is now offline [ 6888.087147] smpboot: CPU 3 is now offline [ 6888.089797] IRQ 125: no longer affine to CPU4 [ 6888.091595] smpboot: CPU 4 is now offline [ 6888.094182] IRQ 124: no longer affine to CPU5 [ 6888.095229] smpboot: CPU 5 is now offline [ 6888.098128] IRQ 123: no longer affine to CPU6 [ 6888.098145] IRQ 128: no longer affine to CPU6 [ 6888.099167] smpboot: CPU 6 is now offline [ 6888.102282] IRQ 122: no longer affine to CPU7 [ 6888.102310] IRQ 130: no longer affine to CPU7 [ 6888.103330] smpboot: CPU 7 is now offline [ 6888.108293] ACPI: Low-level resume complete [ 6888.108368] ACPI: EC: EC started [ 6888.108368] PM: Restoring platform NVS memory [ 6888.110385] Enabling non-boot CPUs ... [ 6888.110430] x86: Booting SMP configuration: [ 6888.110431] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 6888.110724] microcode: sig=0x806ea, pf=0x80, revision=0xb4 [ 6888.112235] CPU1 is up [ 6888.112264] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 6888.114077] CPU2 is up [ 6888.114104] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 6888.115938] CPU3 is up [ 6888.115965] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 6888.116324] microcode: sig=0x806ea, pf=0x80, revision=0xca [ 6888.116669] CPU4 is up [ 6888.116698] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 6888.117283] CPU5 is up [ 6888.117310] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 6888.117894] CPU6 is up [ 6888.117922] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 6888.118528] CPU7 is up [ 6888.121292] ACPI: Waking up from system sleep state S3 [ 6888.170638] ACPI: EC: interrupt unblocked [ 6888.238917] ACPI: EC: event unblocked [ 6888.239552] sd 0:0:0:0: [sda] Starting disk [ 6888.449244] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [ 6888.485223] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [ 6888.553309] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6888.555351] ata2.00: configured for UDMA/133 [ 6888.761478] usb 1-6: reset high-speed USB device number 3 using xhci_hcd [ 6889.037254] usb 1-7: reset full-speed USB device number 4 using xhci_hcd [ 6889.188482] OOM killer enabled. [ 6889.188483] Restarting tasks ... [ 6889.197736] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [ 6889.198128] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [ 6889.198130] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [ 6889.198505] done. [ 6889.252215] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [ 6889.285244] PM: suspend exit [ 6890.621020] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6890.890739] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 6890.890743] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6890.890746] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 6890.952281] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 6890.952287] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6890.952291] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 6890.989257] ata1.00: configured for UDMA/133 [ 6893.160468] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [ 6893.422013] r8169 0000:01:00.0 enp1s0: Link is Down [ 6898.939276] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 6898.975317] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 6899.077134] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [ 6899.181137] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [ 6899.285111] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [ 6899.617407] wlp2s0: authenticate with e8:fc:af:fb:41:ff [ 6899.649000] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [ 6899.757154] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 2/3) [ 6899.861126] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 3/3) [ 6899.965135] wlp2s0: authentication with e8:fc:af:fb:41:ff timed out [ 6900.148072] wlp2s0: authenticate with e8:fc:af:fb:42:00 [ 6900.176072] wlp2s0: send auth to e8:fc:af:fb:42:00 (try 1/3) [ 6900.177872] wlp2s0: authenticated [ 6900.181138] wlp2s0: associate with e8:fc:af:fb:42:00 (try 1/3) [ 6900.184885] wlp2s0: RX AssocResp from e8:fc:af:fb:42:00 (capab=0x431 status=0 aid=7) [ 6900.184904] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 6900.184907] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 6900.188020] wlp2s0: associated [ 6900.188302] ath: EEPROM regdomain: 0x8348 [ 6900.188304] ath: EEPROM indicates we should expect a country code [ 6900.188307] ath: doing EEPROM country->regdmn map search [ 6900.188310] ath: country maps to regdmn code: 0x3a [ 6900.188312] ath: Country alpha2 being used: US [ 6900.188314] ath: Regpair used: 0x3a [ 6900.188317] ath: regdomain 0x8348 dynamically updated by country element [ 6900.223185] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 6900.285627] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:00 [ 6908.750572] wlp2s0: disconnect from AP e8:fc:af:fb:42:00 for new auth to e8:fc:af:fb:42:01 [ 6908.757264] wlp2s0: authenticate with e8:fc:af:fb:42:01 [ 6908.790700] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [ 6908.791460] wlp2s0: authenticated [ 6908.793115] wlp2s0: associate with e8:fc:af:fb:42:01 (try 1/3) [ 6908.794196] wlp2s0: RX ReassocResp from e8:fc:af:fb:42:01 (capab=0x11 status=0 aid=5) [ 6908.794205] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [ 6908.794206] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [ 6908.796966] wlp2s0: associated [ 6908.797201] ath: EEPROM regdomain: 0x8348 [ 6908.797201] ath: EEPROM indicates we should expect a country code [ 6908.797202] ath: doing EEPROM country->regdmn map search [ 6908.797202] ath: country maps to regdmn code: 0x3a [ 6908.797203] ath: Country alpha2 being used: US [ 6908.797203] ath: Regpair used: 0x3a [ 6908.797204] ath: regdomain 0x8348 dynamically updated by country element [ 6908.957366] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:01 [12162.212384] perf: interrupt took too long (4035 > 3978), lowering kernel.perf_event_max_sample_rate to 49500 [17772.732882] perf: interrupt took too long (5060 > 5043), lowering kernel.perf_event_max_sample_rate to 39500 [29468.715426] PM: suspend entry (deep) [29469.610272] Filesystems sync: 0.894 seconds [29469.611305] Freezing user space processes ... (elapsed 0.004 seconds) done. [29469.615893] OOM killer disabled. [29469.615894] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [29469.617650] printk: Suspending console(s) (use no_console_suspend to debug) [29469.619151] wlp2s0: deauthenticating from e8:fc:af:fb:42:01 by local choice (Reason: 3=DEAUTH_LEAVING) [29469.754021] sd 0:0:0:0: [sda] Synchronizing SCSI cache [29469.926428] sd 0:0:0:0: [sda] Stopping disk [29470.869629] ACPI: EC: interrupt blocked [29470.910870] ACPI: Preparing to enter system sleep state S3 [29470.920348] ACPI: EC: event blocked [29470.920349] ACPI: EC: EC stopped [29470.920351] PM: Saving platform NVS memory [29470.920500] Disabling non-boot CPUs ... [29470.922273] smpboot: CPU 1 is now offline [29470.927228] smpboot: CPU 2 is now offline [29470.931252] smpboot: CPU 3 is now offline [29470.934466] IRQ 125: no longer affine to CPU4 [29470.936244] smpboot: CPU 4 is now offline [29470.939481] IRQ 124: no longer affine to CPU5 [29470.940507] smpboot: CPU 5 is now offline [29470.943762] IRQ 123: no longer affine to CPU6 [29470.943776] IRQ 128: no longer affine to CPU6 [29470.944794] smpboot: CPU 6 is now offline [29470.947806] IRQ 122: no longer affine to CPU7 [29470.947824] IRQ 130: no longer affine to CPU7 [29470.948835] smpboot: CPU 7 is now offline [29470.952902] ACPI: Low-level resume complete [29470.952978] ACPI: EC: EC started [29470.952978] PM: Restoring platform NVS memory [29470.954984] Enabling non-boot CPUs ... [29470.955030] x86: Booting SMP configuration: [29470.955031] smpboot: Booting Node 0 Processor 1 APIC 0x2 [29470.955325] microcode: sig=0x806ea, pf=0x80, revision=0xb4 [29470.956836] CPU1 is up [29470.956865] smpboot: Booting Node 0 Processor 2 APIC 0x4 [29470.958683] CPU2 is up [29470.958709] smpboot: Booting Node 0 Processor 3 APIC 0x6 [29470.960554] CPU3 is up [29470.960581] smpboot: Booting Node 0 Processor 4 APIC 0x1 [29470.960921] microcode: sig=0x806ea, pf=0x80, revision=0xca [29470.961271] CPU4 is up [29470.961302] smpboot: Booting Node 0 Processor 5 APIC 0x3 [29470.961885] CPU5 is up [29470.961911] smpboot: Booting Node 0 Processor 6 APIC 0x5 [29470.962511] CPU6 is up [29470.962539] smpboot: Booting Node 0 Processor 7 APIC 0x7 [29470.963146] CPU7 is up [29470.965932] ACPI: Waking up from system sleep state S3 [29471.015655] ACPI: EC: interrupt unblocked [29471.082397] ACPI: EC: event unblocked [29471.083163] sd 0:0:0:0: [sda] Starting disk [29471.292722] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [29471.328674] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [29471.397062] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [29471.399395] ata2.00: configured for UDMA/133 [29471.604902] usb 1-7: reset full-speed USB device number 4 using xhci_hcd [29471.880650] usb 1-6: reset high-speed USB device number 3 using xhci_hcd [29473.380577] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [29473.392262] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [29473.392267] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [29473.392270] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [29473.453368] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [29473.453372] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [29473.453375] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [29473.490435] ata1.00: configured for UDMA/133 [29473.862371] OOM killer enabled. [29473.862371] Restarting tasks ... done. [29473.872635] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [29473.873248] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [29473.873250] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [29473.923047] PM: suspend exit [29473.928324] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [29474.020244] wlp2s0: authenticate with e8:fc:af:fb:42:00 [29474.052586] wlp2s0: send auth to e8:fc:af:fb:42:00 (try 1/3) [29474.054394] wlp2s0: authenticated [29474.056542] wlp2s0: associate with e8:fc:af:fb:42:00 (try 1/3) [29474.060983] wlp2s0: RX AssocResp from e8:fc:af:fb:42:00 (capab=0x431 status=0 aid=8) [29474.060999] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [29474.061001] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [29474.063453] wlp2s0: associated [29474.063681] ath: EEPROM regdomain: 0x8348 [29474.063683] ath: EEPROM indicates we should expect a country code [29474.063686] ath: doing EEPROM country->regdmn map search [29474.063690] ath: country maps to regdmn code: 0x3a [29474.063692] ath: Country alpha2 being used: US [29474.063742] ath: Regpair used: 0x3a [29474.063746] ath: regdomain 0x8348 dynamically updated by country element [29474.089008] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:00 [29474.823876] wlp2s0: deauthenticating from e8:fc:af:fb:42:00 by local choice (Reason: 3=DEAUTH_LEAVING) [29474.840710] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [29475.109475] r8169 0000:01:00.0 enp1s0: Link is Down [29480.266137] wlp2s0: authenticate with e8:fc:af:fb:42:01 [29480.302175] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [29480.404589] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [29480.508651] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [29480.612623] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [29480.793546] wlp2s0: authenticate with e8:fc:af:fb:42:00 [29480.823082] wlp2s0: send auth to e8:fc:af:fb:42:00 (try 1/3) [29480.824876] wlp2s0: authenticated [29480.828581] wlp2s0: associate with e8:fc:af:fb:42:00 (try 1/3) [29480.832197] wlp2s0: RX AssocResp from e8:fc:af:fb:42:00 (capab=0x431 status=0 aid=8) [29480.832203] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [29480.832204] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [29480.834383] wlp2s0: associated [29480.834494] ath: EEPROM regdomain: 0x8348 [29480.834494] ath: EEPROM indicates we should expect a country code [29480.834495] ath: doing EEPROM country->regdmn map search [29480.834496] ath: country maps to regdmn code: 0x3a [29480.834496] ath: Country alpha2 being used: US [29480.834497] ath: Regpair used: 0x3a [29480.834497] ath: regdomain 0x8348 dynamically updated by country element [29480.847750] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:00 [29480.868004] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [29489.401466] wlp2s0: disconnect from AP e8:fc:af:fb:42:00 for new auth to e8:fc:af:fb:42:01 [29489.408639] wlp2s0: authenticate with e8:fc:af:fb:42:01 [29489.442381] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [29489.548732] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [29489.652680] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [29489.756746] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [29489.947710] wlp2s0: authenticate with e8:fc:af:fb:42:00 [29489.977759] wlp2s0: send auth to e8:fc:af:fb:42:00 (try 1/3) [29489.980526] wlp2s0: authenticated [29489.984665] wlp2s0: associate with e8:fc:af:fb:42:00 (try 1/3) [29489.988325] wlp2s0: RX AssocResp from e8:fc:af:fb:42:00 (capab=0x431 status=0 aid=8) [29489.988333] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [29489.988333] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [29489.990918] wlp2s0: associated [29489.991042] ath: EEPROM regdomain: 0x8348 [29489.991042] ath: EEPROM indicates we should expect a country code [29489.991043] ath: doing EEPROM country->regdmn map search [29489.991044] ath: country maps to regdmn code: 0x3a [29489.991045] ath: Country alpha2 being used: US [29489.991046] ath: Regpair used: 0x3a [29489.991047] ath: regdomain 0x8348 dynamically updated by country element [29490.063440] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:00 [29546.856798] wlp2s0: disconnect from AP e8:fc:af:fb:42:00 for new auth to e8:fc:af:fb:41:ff [29546.864203] wlp2s0: authenticate with e8:fc:af:fb:41:ff [29546.896356] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [29547.001266] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 2/3) [29547.105267] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 3/3) [29547.209297] wlp2s0: authentication with e8:fc:af:fb:41:ff timed out [29547.553574] wlp2s0: authenticate with e8:fc:af:fb:42:01 [29547.587981] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [29547.588796] wlp2s0: authenticated [29547.597241] wlp2s0: associate with e8:fc:af:fb:42:01 (try 1/3) [29547.598390] wlp2s0: RX AssocResp from e8:fc:af:fb:42:01 (capab=0x11 status=0 aid=5) [29547.598416] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [29547.598419] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [29547.601480] wlp2s0: associated [29547.601813] ath: EEPROM regdomain: 0x8348 [29547.601814] ath: EEPROM indicates we should expect a country code [29547.601816] ath: doing EEPROM country->regdmn map search [29547.601818] ath: country maps to regdmn code: 0x3a [29547.601820] ath: Country alpha2 being used: US [29547.601821] ath: Regpair used: 0x3a [29547.601824] ath: regdomain 0x8348 dynamically updated by country element [29547.661870] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:01 [33966.727579] perf: interrupt took too long (6489 > 6325), lowering kernel.perf_event_max_sample_rate to 30750 [35362.798083] PM: suspend entry (deep) [35363.059849] Filesystems sync: 0.261 seconds [35363.087014] Freezing user space processes ... (elapsed 0.004 seconds) done. [35363.091617] OOM killer disabled. [35363.091619] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [35363.093409] printk: Suspending console(s) (use no_console_suspend to debug) [35363.094674] wlp2s0: deauthenticating from e8:fc:af:fb:42:01 by local choice (Reason: 3=DEAUTH_LEAVING) [35363.246052] sd 0:0:0:0: [sda] Synchronizing SCSI cache [35363.281418] sd 0:0:0:0: [sda] Stopping disk [35364.242071] ACPI: EC: interrupt blocked [35364.283079] ACPI: Preparing to enter system sleep state S3 [35364.292980] ACPI: EC: event blocked [35364.292982] ACPI: EC: EC stopped [35364.292983] PM: Saving platform NVS memory [35364.293134] Disabling non-boot CPUs ... [35364.294895] smpboot: CPU 1 is now offline [35364.300163] smpboot: CPU 2 is now offline [35364.302380] smpboot: CPU 3 is now offline [35364.303649] IRQ 125: no longer affine to CPU4 [35364.304865] smpboot: CPU 4 is now offline [35364.305868] IRQ 124: no longer affine to CPU5 [35364.306880] smpboot: CPU 5 is now offline [35364.307965] IRQ 123: no longer affine to CPU6 [35364.307970] IRQ 128: no longer affine to CPU6 [35364.308973] smpboot: CPU 6 is now offline [35364.310196] IRQ 122: no longer affine to CPU7 [35364.310205] IRQ 130: no longer affine to CPU7 [35364.311208] smpboot: CPU 7 is now offline [35364.314176] ACPI: Low-level resume complete [35364.314251] ACPI: EC: EC started [35364.314251] PM: Restoring platform NVS memory [35364.316259] Enabling non-boot CPUs ... [35364.316305] x86: Booting SMP configuration: [35364.316306] smpboot: Booting Node 0 Processor 1 APIC 0x2 [35364.316599] microcode: sig=0x806ea, pf=0x80, revision=0xb4 [35364.318121] CPU1 is up [35364.318150] smpboot: Booting Node 0 Processor 2 APIC 0x4 [35364.319973] CPU2 is up [35364.320000] smpboot: Booting Node 0 Processor 3 APIC 0x6 [35364.321836] CPU3 is up [35364.321862] smpboot: Booting Node 0 Processor 4 APIC 0x1 [35364.322221] microcode: sig=0x806ea, pf=0x80, revision=0xca [35364.322570] CPU4 is up [35364.322601] smpboot: Booting Node 0 Processor 5 APIC 0x3 [35364.323186] CPU5 is up [35364.323212] smpboot: Booting Node 0 Processor 6 APIC 0x5 [35364.323804] CPU6 is up [35364.323831] smpboot: Booting Node 0 Processor 7 APIC 0x7 [35364.324437] CPU7 is up [35364.327197] ACPI: Waking up from system sleep state S3 [35364.375807] ACPI: EC: interrupt unblocked [35364.442682] ACPI: EC: event unblocked [35364.443235] sd 0:0:0:0: [sda] Starting disk [35364.652941] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [35364.689081] usb 1-6: reset high-speed USB device number 3 using xhci_hcd [35364.757108] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [35364.759360] ata2.00: configured for UDMA/133 [35364.965222] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [35365.241004] usb 1-7: reset full-speed USB device number 4 using xhci_hcd [35365.391888] OOM killer enabled. [35365.391890] Restarting tasks ... [35365.397960] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [35365.399547] done. [35365.509141] PM: suspend exit [35366.737276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [35366.748750] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [35366.748754] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [35366.748757] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [35366.810180] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [35366.810186] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [35366.810190] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [35366.847212] ata1.00: configured for UDMA/133 [35366.902674] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [35366.902679] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [35366.958209] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [35367.953607] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [35368.218436] r8169 0000:01:00.0 enp1s0: Link is Down [35373.388613] wlp2s0: authenticate with e8:fc:af:fb:42:01 [35373.424811] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [35373.526592] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [35373.630604] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [35373.734612] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [35374.062876] wlp2s0: authenticate with e8:fc:af:fb:41:ff [35374.093852] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [35374.194720] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 2/3) [35374.298723] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 3/3) [35374.402731] wlp2s0: authentication with e8:fc:af:fb:41:ff timed out [35374.581339] wlp2s0: authenticate with e8:fc:af:fb:42:00 [35374.609002] wlp2s0: send auth to e8:fc:af:fb:42:00 (try 1/3) [35374.611022] wlp2s0: authenticated [35374.614733] wlp2s0: associate with e8:fc:af:fb:42:00 (try 1/3) [35374.618464] wlp2s0: RX AssocResp from e8:fc:af:fb:42:00 (capab=0x431 status=0 aid=13) [35374.618482] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [35374.618484] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [35374.621552] wlp2s0: associated [35374.621797] ath: EEPROM regdomain: 0x8348 [35374.621799] ath: EEPROM indicates we should expect a country code [35374.621802] ath: doing EEPROM country->regdmn map search [35374.621805] ath: country maps to regdmn code: 0x3a [35374.621807] ath: Country alpha2 being used: US [35374.621809] ath: Regpair used: 0x3a [35374.621813] ath: regdomain 0x8348 dynamically updated by country element [35374.654266] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [35374.738278] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:00 [35383.198659] wlp2s0: disconnect from AP e8:fc:af:fb:42:00 for new auth to e8:fc:af:fb:41:ff [35383.205273] wlp2s0: authenticate with e8:fc:af:fb:41:ff [35383.236862] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [35383.237822] wlp2s0: authenticated [35383.240390] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [35383.241420] wlp2s0: RX ReassocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [35383.241428] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [35383.241429] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [35383.243687] wlp2s0: associated [35383.243795] ath: EEPROM regdomain: 0x8348 [35383.243796] ath: EEPROM indicates we should expect a country code [35383.243797] ath: doing EEPROM country->regdmn map search [35383.243798] ath: country maps to regdmn code: 0x3a [35383.243799] ath: Country alpha2 being used: US [35383.243799] ath: Regpair used: 0x3a [35383.243800] ath: regdomain 0x8348 dynamically updated by country element [35383.369375] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [36698.174634] PM: suspend entry (deep) [36699.183269] Filesystems sync: 1.008 seconds [36699.183998] Freezing user space processes ... (elapsed 0.004 seconds) done. [36699.188969] OOM killer disabled. [36699.188971] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [36699.190761] printk: Suspending console(s) (use no_console_suspend to debug) [36699.191511] wlp2s0: deauthenticating from e8:fc:af:fb:41:ff by local choice (Reason: 3=DEAUTH_LEAVING) [36699.331126] sd 0:0:0:0: [sda] Synchronizing SCSI cache [36699.527591] sd 0:0:0:0: [sda] Stopping disk [36700.471277] ACPI: EC: interrupt blocked [36700.512283] ACPI: Preparing to enter system sleep state S3 [36700.521748] ACPI: EC: event blocked [36700.521749] ACPI: EC: EC stopped [36700.521750] PM: Saving platform NVS memory [36700.521901] Disabling non-boot CPUs ... [36700.523670] smpboot: CPU 1 is now offline [36700.527543] smpboot: CPU 2 is now offline [36700.531276] smpboot: CPU 3 is now offline [36700.533876] IRQ 125: no longer affine to CPU4 [36700.535685] smpboot: CPU 4 is now offline [36700.536764] IRQ 124: no longer affine to CPU5 [36700.537769] smpboot: CPU 5 is now offline [36700.538804] IRQ 123: no longer affine to CPU6 [36700.538809] IRQ 128: no longer affine to CPU6 [36700.539825] smpboot: CPU 6 is now offline [36700.541034] IRQ 122: no longer affine to CPU7 [36700.541045] IRQ 130: no longer affine to CPU7 [36700.542049] smpboot: CPU 7 is now offline [36700.545037] ACPI: Low-level resume complete [36700.545113] ACPI: EC: EC started [36700.545113] PM: Restoring platform NVS memory [36700.547133] Enabling non-boot CPUs ... [36700.547179] x86: Booting SMP configuration: [36700.547179] smpboot: Booting Node 0 Processor 1 APIC 0x2 [36700.547474] microcode: sig=0x806ea, pf=0x80, revision=0xb4 [36700.548992] CPU1 is up [36700.549020] smpboot: Booting Node 0 Processor 2 APIC 0x4 [36700.550835] CPU2 is up [36700.550861] smpboot: Booting Node 0 Processor 3 APIC 0x6 [36700.552702] CPU3 is up [36700.552727] smpboot: Booting Node 0 Processor 4 APIC 0x1 [36700.553086] microcode: sig=0x806ea, pf=0x80, revision=0xca [36700.553426] CPU4 is up [36700.553455] smpboot: Booting Node 0 Processor 5 APIC 0x3 [36700.554054] CPU5 is up [36700.554081] smpboot: Booting Node 0 Processor 6 APIC 0x5 [36700.554672] CPU6 is up [36700.554697] smpboot: Booting Node 0 Processor 7 APIC 0x7 [36700.555301] CPU7 is up [36700.558092] ACPI: Waking up from system sleep state S3 [36700.606065] ACPI: EC: interrupt unblocked [36700.675891] ACPI: EC: event unblocked [36700.676309] sd 0:0:0:0: [sda] Starting disk [36700.886243] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [36700.926402] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [36700.990625] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [36700.993615] ata2.00: configured for UDMA/133 [36701.202570] usb 1-7: reset full-speed USB device number 4 using xhci_hcd [36701.478451] usb 1-6: reset high-speed USB device number 3 using xhci_hcd [36701.628353] OOM killer enabled. [36701.628354] Restarting tasks ... done. [36701.636978] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [36701.637311] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [36701.637313] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [36701.693352] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [36701.734661] PM: suspend exit [36702.982796] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [36702.994821] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [36702.994827] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [36702.994831] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [36703.056212] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [36703.056219] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [36703.056223] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [36703.093255] ata1.00: configured for UDMA/133 [36703.511097] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [36703.775952] r8169 0000:01:00.0 enp1s0: Link is Down [36708.927132] wlp2s0: authenticate with e8:fc:af:fb:42:00 [36708.954708] wlp2s0: send auth to e8:fc:af:fb:42:00 (try 1/3) [36708.956709] wlp2s0: authenticated [36708.960542] wlp2s0: associate with e8:fc:af:fb:42:00 (try 1/3) [36708.968616] wlp2s0: RX AssocResp from e8:fc:af:fb:42:00 (capab=0x431 status=0 aid=13) [36708.968624] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [36708.968625] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [36708.971117] wlp2s0: associated [36708.971248] ath: EEPROM regdomain: 0x8348 [36708.971249] ath: EEPROM indicates we should expect a country code [36708.971249] ath: doing EEPROM country->regdmn map search [36708.971250] ath: country maps to regdmn code: 0x3a [36708.971251] ath: Country alpha2 being used: US [36708.971251] ath: Regpair used: 0x3a [36708.971252] ath: regdomain 0x8348 dynamically updated by country element [36709.004300] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [36709.145969] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:00 [36717.491914] wlp2s0: disconnect from AP e8:fc:af:fb:42:00 for new auth to e8:fc:af:fb:42:01 [36717.499070] wlp2s0: authenticate with e8:fc:af:fb:42:01 [36717.532594] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [36717.638578] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [36717.742561] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [36717.846596] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [36718.181919] wlp2s0: authenticate with e8:fc:af:fb:41:ff [36718.213402] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [36718.214120] wlp2s0: authenticated [36718.214622] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [36718.215638] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [36718.215647] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [36718.215648] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [36718.217879] wlp2s0: associated [36718.218013] ath: EEPROM regdomain: 0x8348 [36718.218014] ath: EEPROM indicates we should expect a country code [36718.218015] ath: doing EEPROM country->regdmn map search [36718.218015] ath: country maps to regdmn code: 0x3a [36718.218016] ath: Country alpha2 being used: US [36718.218016] ath: Regpair used: 0x3a [36718.218018] ath: regdomain 0x8348 dynamically updated by country element [36718.380426] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [36857.590064] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [36857.596550] wlp2s0: authenticate with e8:fc:af:fb:42:01 [36857.630506] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [36857.736041] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [36857.840111] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [36857.944198] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [36858.287941] wlp2s0: authenticate with e8:fc:af:fb:41:ff [36858.335846] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [36858.336623] wlp2s0: authenticated [36858.344437] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [36858.345506] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [36858.345517] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [36858.345519] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [36858.347879] wlp2s0: associated [36858.348112] ath: EEPROM regdomain: 0x8348 [36858.348113] ath: EEPROM indicates we should expect a country code [36858.348114] ath: doing EEPROM country->regdmn map search [36858.348115] ath: country maps to regdmn code: 0x3a [36858.348116] ath: Country alpha2 being used: US [36858.348117] ath: Regpair used: 0x3a [36858.348118] ath: regdomain 0x8348 dynamically updated by country element [36858.466420] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [37024.454305] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [37024.460594] wlp2s0: authenticate with e8:fc:af:fb:42:01 [37024.494467] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [37024.601330] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [37024.709536] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [37024.813325] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [37025.156420] wlp2s0: authenticate with e8:fc:af:fb:41:ff [37025.203832] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [37025.204618] wlp2s0: authenticated [37025.205706] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [37025.206747] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [37025.206758] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [37025.206759] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [37025.209320] wlp2s0: associated [37025.209438] ath: EEPROM regdomain: 0x8348 [37025.209439] ath: EEPROM indicates we should expect a country code [37025.209440] ath: doing EEPROM country->regdmn map search [37025.209441] ath: country maps to regdmn code: 0x3a [37025.209442] ath: Country alpha2 being used: US [37025.209442] ath: Regpair used: 0x3a [37025.209444] ath: regdomain 0x8348 dynamically updated by country element [37025.381448] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [37164.572305] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [37164.578524] wlp2s0: authenticate with e8:fc:af:fb:42:01 [37164.612269] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [37164.716504] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [37164.820559] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [37164.924745] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [37165.276075] wlp2s0: authenticate with e8:fc:af:fb:41:ff [37165.323865] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [37165.324746] wlp2s0: authenticated [37165.328815] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [37165.329921] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [37165.329940] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [37165.329942] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [37165.332616] wlp2s0: associated [37165.332980] ath: EEPROM regdomain: 0x8348 [37165.332982] ath: EEPROM indicates we should expect a country code [37165.332985] ath: doing EEPROM country->regdmn map search [37165.332988] ath: country maps to regdmn code: 0x3a [37165.332997] ath: Country alpha2 being used: US [37165.333000] ath: Regpair used: 0x3a [37165.333004] ath: regdomain 0x8348 dynamically updated by country element [37165.467046] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [37222.504180] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [37222.511921] wlp2s0: authenticate with e8:fc:af:fb:42:01 [37222.546011] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [37222.646782] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [37222.750786] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [37222.858780] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [37223.195394] wlp2s0: authenticate with e8:fc:af:fb:41:ff [37223.243210] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [37223.244209] wlp2s0: authenticated [37223.246897] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [37223.248044] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [37223.248068] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [37223.248071] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [37223.251603] wlp2s0: associated [37223.251901] ath: EEPROM regdomain: 0x8348 [37223.251904] ath: EEPROM indicates we should expect a country code [37223.251907] ath: doing EEPROM country->regdmn map search [37223.251910] ath: country maps to regdmn code: 0x3a [37223.251913] ath: Country alpha2 being used: US [37223.251915] ath: Regpair used: 0x3a [37223.251918] ath: regdomain 0x8348 dynamically updated by country element [37223.426642] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [37331.488810] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [37331.495095] wlp2s0: authenticate with e8:fc:af:fb:42:01 [37331.529180] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [37331.636263] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [37331.740221] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [37331.844144] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [37332.172218] wlp2s0: authenticate with e8:fc:af:fb:41:ff [37332.219800] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [37332.220685] wlp2s0: authenticated [37332.223803] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [37332.226353] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [37332.226376] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [37332.226378] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [37332.229409] wlp2s0: associated [37332.229736] ath: EEPROM regdomain: 0x8348 [37332.229738] ath: EEPROM indicates we should expect a country code [37332.229740] ath: doing EEPROM country->regdmn map search [37332.229743] ath: country maps to regdmn code: 0x3a [37332.229745] ath: Country alpha2 being used: US [37332.229746] ath: Regpair used: 0x3a [37332.229749] ath: regdomain 0x8348 dynamically updated by country element [37332.382169] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [37522.456949] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [37522.463745] wlp2s0: authenticate with e8:fc:af:fb:42:01 [37522.497987] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [37522.602401] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [37522.706419] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [37522.810351] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [37523.138516] wlp2s0: authenticate with e8:fc:af:fb:41:ff [37523.186111] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [37523.186890] wlp2s0: authenticated [37523.190245] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [37523.191297] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [37523.191312] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [37523.191314] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [37523.193802] wlp2s0: associated [37523.193967] ath: EEPROM regdomain: 0x8348 [37523.193968] ath: EEPROM indicates we should expect a country code [37523.193969] ath: doing EEPROM country->regdmn map search [37523.193971] ath: country maps to regdmn code: 0x3a [37523.193972] ath: Country alpha2 being used: US [37523.193973] ath: Regpair used: 0x3a [37523.193974] ath: regdomain 0x8348 dynamically updated by country element [37523.259211] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [37829.458065] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [37829.466504] wlp2s0: authenticate with e8:fc:af:fb:42:01 [37829.500515] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [37829.603274] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [37829.707331] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [37829.811231] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [37830.160493] wlp2s0: authenticate with e8:fc:af:fb:41:ff [37830.207868] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [37830.208754] wlp2s0: authenticated [37830.211294] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [37830.212452] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [37830.212475] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [37830.212477] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [37830.217356] wlp2s0: associated [37830.217634] ath: EEPROM regdomain: 0x8348 [37830.217636] ath: EEPROM indicates we should expect a country code [37830.217638] ath: doing EEPROM country->regdmn map search [37830.217642] ath: country maps to regdmn code: 0x3a [37830.217644] ath: Country alpha2 being used: US [37830.217647] ath: Regpair used: 0x3a [37830.217650] ath: regdomain 0x8348 dynamically updated by country element [37830.259896] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [38443.428964] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [38443.440894] wlp2s0: authenticate with e8:fc:af:fb:42:01 [38443.475219] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [38443.577426] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [38443.681429] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [38443.785460] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [38444.129823] wlp2s0: authenticate with e8:fc:af:fb:41:ff [38444.177939] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [38444.178761] wlp2s0: authenticated [38444.181560] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [38444.182778] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [38444.182811] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [38444.182813] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [38444.186584] wlp2s0: associated [38444.186772] ath: EEPROM regdomain: 0x8348 [38444.186773] ath: EEPROM indicates we should expect a country code [38444.186774] ath: doing EEPROM country->regdmn map search [38444.186776] ath: country maps to regdmn code: 0x3a [38444.186777] ath: Country alpha2 being used: US [38444.186778] ath: Regpair used: 0x3a [38444.186780] ath: regdomain 0x8348 dynamically updated by country element [38444.261170] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [38559.514109] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [38559.521078] wlp2s0: authenticate with e8:fc:af:fb:42:01 [38559.554972] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [38559.658585] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [38559.762582] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [38559.866555] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [38560.207078] wlp2s0: authenticate with e8:fc:af:fb:41:ff [38560.254866] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [38560.255735] wlp2s0: authenticated [38560.258582] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [38560.260048] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [38560.260070] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [38560.260073] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [38560.263466] wlp2s0: associated [38560.263783] ath: EEPROM regdomain: 0x8348 [38560.263785] ath: EEPROM indicates we should expect a country code [38560.263787] ath: doing EEPROM country->regdmn map search [38560.263790] ath: country maps to regdmn code: 0x3a [38560.263792] ath: Country alpha2 being used: US [38560.263794] ath: Regpair used: 0x3a [38560.263797] ath: regdomain 0x8348 dynamically updated by country element [38560.384788] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [38699.574953] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [38699.584632] wlp2s0: authenticate with e8:fc:af:fb:42:01 [38699.619212] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [38699.727456] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [38699.831471] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [38699.935576] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [38700.267424] wlp2s0: authenticate with e8:fc:af:fb:41:ff [38700.315067] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [38700.315863] wlp2s0: authenticated [38700.319599] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [38700.320643] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [38700.320658] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [38700.320659] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [38700.323423] wlp2s0: associated [38700.323647] ath: EEPROM regdomain: 0x8348 [38700.323647] ath: EEPROM indicates we should expect a country code [38700.323649] ath: doing EEPROM country->regdmn map search [38700.323650] ath: country maps to regdmn code: 0x3a [38700.323651] ath: Country alpha2 being used: US [38700.323652] ath: Regpair used: 0x3a [38700.323654] ath: regdomain 0x8348 dynamically updated by country element [38700.470498] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [38866.580266] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [38866.587734] wlp2s0: authenticate with e8:fc:af:fb:42:01 [38866.621978] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [38866.728341] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [38866.832365] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [38866.936420] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [38867.284130] wlp2s0: authenticate with e8:fc:af:fb:41:ff [38867.331895] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [38867.332613] wlp2s0: authenticated [38867.340445] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [38867.341513] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [38867.341528] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [38867.341529] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [38867.343997] wlp2s0: associated [38867.344210] ath: EEPROM regdomain: 0x8348 [38867.344211] ath: EEPROM indicates we should expect a country code [38867.344213] ath: doing EEPROM country->regdmn map search [38867.344215] ath: country maps to regdmn code: 0x3a [38867.344216] ath: Country alpha2 being used: US [38867.344217] ath: Regpair used: 0x3a [38867.344219] ath: regdomain 0x8348 dynamically updated by country element [38867.385433] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [39006.571144] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [39006.578698] wlp2s0: authenticate with e8:fc:af:fb:42:01 [39006.612772] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [39006.716218] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [39006.820273] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [39006.928288] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [39007.279906] wlp2s0: authenticate with e8:fc:af:fb:41:ff [39007.327314] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [39007.328099] wlp2s0: authenticated [39007.332271] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [39007.333699] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [39007.333721] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [39007.333723] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [39007.337235] wlp2s0: associated [39007.337514] ath: EEPROM regdomain: 0x8348 [39007.337517] ath: EEPROM indicates we should expect a country code [39007.337521] ath: doing EEPROM country->regdmn map search [39007.337524] ath: country maps to regdmn code: 0x3a [39007.337528] ath: Country alpha2 being used: US [39007.337530] ath: Regpair used: 0x3a [39007.337535] ath: regdomain 0x8348 dynamically updated by country element [39007.471190] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [39057.572927] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [39057.580503] wlp2s0: authenticate with e8:fc:af:fb:42:01 [39057.614226] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [39057.721370] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [39057.825358] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [39057.929382] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [39058.281742] wlp2s0: authenticate with e8:fc:af:fb:41:ff [39058.329687] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [39058.330488] wlp2s0: authenticated [39058.333416] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [39058.334561] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [39058.334586] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [39058.334590] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [39058.338214] wlp2s0: associated [39058.338569] ath: EEPROM regdomain: 0x8348 [39058.338572] ath: EEPROM indicates we should expect a country code [39058.338576] ath: doing EEPROM country->regdmn map search [39058.338580] ath: country maps to regdmn code: 0x3a [39058.338584] ath: Country alpha2 being used: US [39058.338586] ath: Regpair used: 0x3a [39058.338590] ath: regdomain 0x8348 dynamically updated by country element [39058.467196] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [39173.497330] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [39173.504188] wlp2s0: authenticate with e8:fc:af:fb:42:01 [39173.538252] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [39173.639190] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [39173.747189] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [39173.851217] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [39174.191506] wlp2s0: authenticate with e8:fc:af:fb:41:ff [39174.239189] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [39174.240064] wlp2s0: authenticated [39174.243282] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [39174.244342] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [39174.244360] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [39174.244362] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [39174.247039] wlp2s0: associated [39174.247314] ath: EEPROM regdomain: 0x8348 [39174.247316] ath: EEPROM indicates we should expect a country code [39174.247318] ath: doing EEPROM country->regdmn map search [39174.247321] ath: country maps to regdmn code: 0x3a [39174.247322] ath: Country alpha2 being used: US [39174.247324] ath: Regpair used: 0x3a [39174.247327] ath: regdomain 0x8348 dynamically updated by country element [39174.386074] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [39313.603314] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [39313.610161] wlp2s0: authenticate with e8:fc:af:fb:42:01 [39313.643871] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [39313.745490] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [39313.849542] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 3/3) [39313.953529] wlp2s0: authentication with e8:fc:af:fb:42:01 timed out [39314.288813] wlp2s0: authenticate with e8:fc:af:fb:41:ff [39314.336209] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [39314.337014] wlp2s0: authenticated [39314.337534] wlp2s0: associate with e8:fc:af:fb:41:ff (try 1/3) [39314.338609] wlp2s0: RX AssocResp from e8:fc:af:fb:41:ff (capab=0x11 status=0 aid=3) [39314.338623] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [39314.338624] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [39314.341180] wlp2s0: associated [39314.341348] ath: EEPROM regdomain: 0x8348 [39314.341349] ath: EEPROM indicates we should expect a country code [39314.341350] ath: doing EEPROM country->regdmn map search [39314.341352] ath: country maps to regdmn code: 0x3a [39314.341353] ath: Country alpha2 being used: US [39314.341354] ath: Regpair used: 0x3a [39314.341356] ath: regdomain 0x8348 dynamically updated by country element [39314.471731] wlp2s0: Limiting TX power to 24 (24 - 0) dBm as advertised by e8:fc:af:fb:41:ff [39480.583630] wlp2s0: disconnect from AP e8:fc:af:fb:41:ff for new auth to e8:fc:af:fb:42:01 [39480.594176] wlp2s0: authenticate with e8:fc:af:fb:42:01 [39480.628351] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [39480.735761] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 2/3) [39480.736700] wlp2s0: authenticated [39480.739801] wlp2s0: associate with e8:fc:af:fb:42:01 (try 1/3) [39480.740949] wlp2s0: RX ReassocResp from e8:fc:af:fb:42:01 (capab=0x11 status=0 aid=6) [39480.740978] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [39480.740981] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [39480.744027] wlp2s0: associated [39480.744360] ath: EEPROM regdomain: 0x8348 [39480.744362] ath: EEPROM indicates we should expect a country code [39480.744365] ath: doing EEPROM country->regdmn map search [39480.744369] ath: country maps to regdmn code: 0x3a [39480.744371] ath: Country alpha2 being used: US [39480.744373] ath: Regpair used: 0x3a [39480.744377] ath: regdomain 0x8348 dynamically updated by country element [39480.799458] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:01 [43286.094980] PM: suspend entry (deep) [43286.614147] Filesystems sync: 0.519 seconds [43286.614798] Freezing user space processes ... (elapsed 0.004 seconds) done. [43286.619441] OOM killer disabled. [43286.619442] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [43286.621137] printk: Suspending console(s) (use no_console_suspend to debug) [43286.623972] wlp2s0: deauthenticating from e8:fc:af:fb:42:01 by local choice (Reason: 3=DEAUTH_LEAVING) [43286.761632] sd 0:0:0:0: [sda] Synchronizing SCSI cache [43286.782894] sd 0:0:0:0: [sda] Stopping disk [43287.746127] ACPI: EC: interrupt blocked [43287.786310] ACPI: Preparing to enter system sleep state S3 [43287.796200] ACPI: EC: event blocked [43287.796202] ACPI: EC: EC stopped [43287.796203] PM: Saving platform NVS memory [43287.796353] Disabling non-boot CPUs ... [43287.798095] smpboot: CPU 1 is now offline [43287.803059] smpboot: CPU 2 is now offline [43287.807176] smpboot: CPU 3 is now offline [43287.810054] IRQ 125: no longer affine to CPU4 [43287.811833] smpboot: CPU 4 is now offline [43287.814692] IRQ 124: no longer affine to CPU5 [43287.815733] smpboot: CPU 5 is now offline [43287.818694] IRQ 123: no longer affine to CPU6 [43287.818708] IRQ 128: no longer affine to CPU6 [43287.819730] smpboot: CPU 6 is now offline [43287.822827] IRQ 122: no longer affine to CPU7 [43287.822854] IRQ 130: no longer affine to CPU7 [43287.823890] smpboot: CPU 7 is now offline [43287.829115] ACPI: Low-level resume complete [43287.829190] ACPI: EC: EC started [43287.829191] PM: Restoring platform NVS memory [43287.831197] Enabling non-boot CPUs ... [43287.831242] x86: Booting SMP configuration: [43287.831243] smpboot: Booting Node 0 Processor 1 APIC 0x2 [43287.831537] microcode: sig=0x806ea, pf=0x80, revision=0xb4 [43287.833047] CPU1 is up [43287.833076] smpboot: Booting Node 0 Processor 2 APIC 0x4 [43287.834894] CPU2 is up [43287.834922] smpboot: Booting Node 0 Processor 3 APIC 0x6 [43287.836762] CPU3 is up [43287.836789] smpboot: Booting Node 0 Processor 4 APIC 0x1 [43287.837147] microcode: sig=0x806ea, pf=0x80, revision=0xca [43287.837487] CPU4 is up [43287.837517] smpboot: Booting Node 0 Processor 5 APIC 0x3 [43287.838098] CPU5 is up [43287.838125] smpboot: Booting Node 0 Processor 6 APIC 0x5 [43287.838719] CPU6 is up [43287.838744] smpboot: Booting Node 0 Processor 7 APIC 0x7 [43287.839353] CPU7 is up [43287.842129] ACPI: Waking up from system sleep state S3 [43287.890966] ACPI: EC: interrupt unblocked [43287.958364] ACPI: EC: event unblocked [43287.959346] sd 0:0:0:0: [sda] Starting disk [43288.168642] ath10k_pci 0000:02:00.0: unsupported HTC service id: 1536 [43288.204693] usb 1-7: reset full-speed USB device number 4 using xhci_hcd [43288.276343] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [43288.278600] ata2.00: configured for UDMA/133 [43288.484817] usb 1-6: reset high-speed USB device number 3 using xhci_hcd [43288.760503] usb 1-5: reset high-speed USB device number 2 using xhci_hcd [43288.924220] OOM killer enabled. [43288.924222] Restarting tasks ... [43288.928866] mei_hdcp mei::b638ab7e-94e2-4ea2-a552-d1c54b627f04:01: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915]) [43288.929647] Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00000302.bin [43288.929652] Bluetooth: hci0: QCA: patch rome 0x302 build 0x3e8, firmware rome 0x302 build 0x111 [43288.930699] done. [43288.984501] Bluetooth: hci0: using NVM file: qca/nvm_usb_00000302.bin [43288.996159] PM: suspend exit [43289.240271] wlp2s0: authenticate with e8:fc:af:fb:41:ff [43289.272412] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 1/3) [43289.376396] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 2/3) [43289.480367] wlp2s0: send auth to e8:fc:af:fb:41:ff (try 3/3) [43289.584364] wlp2s0: authentication with e8:fc:af:fb:41:ff timed out [43289.758620] wlp2s0: authenticate with e8:fc:af:fb:42:00 [43289.788971] wlp2s0: send auth to e8:fc:af:fb:42:00 (try 1/3) [43289.790767] wlp2s0: authenticated [43289.792333] wlp2s0: associate with e8:fc:af:fb:42:00 (try 1/3) [43289.796027] wlp2s0: RX AssocResp from e8:fc:af:fb:42:00 (capab=0x431 status=0 aid=8) [43289.796045] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [43289.796048] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [43289.798768] wlp2s0: associated [43289.798969] ath: EEPROM regdomain: 0x8348 [43289.798970] ath: EEPROM indicates we should expect a country code [43289.798972] ath: doing EEPROM country->regdmn map search [43289.798974] ath: country maps to regdmn code: 0x3a [43289.798976] ath: Country alpha2 being used: US [43289.798977] ath: Regpair used: 0x3a [43289.798979] ath: regdomain 0x8348 dynamically updated by country element [43289.917382] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:00 [43290.324264] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [43290.335277] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [43290.335279] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [43290.335280] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [43290.395572] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [43290.395578] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [43290.395582] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [43290.432520] ata1.00: configured for UDMA/133 [43290.914894] wlp2s0: deauthenticating from e8:fc:af:fb:42:00 by local choice (Reason: 3=DEAUTH_LEAVING) [43290.935538] Generic PHY r8169-100:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-100:00, irq=IGNORE) [43291.197228] r8169 0000:01:00.0 enp1s0: Link is Down [43296.289042] wlp2s0: authenticate with e8:fc:af:fb:42:01 [43296.339644] wlp2s0: send auth to e8:fc:af:fb:42:01 (try 1/3) [43296.340485] wlp2s0: authenticated [43296.344186] wlp2s0: associate with e8:fc:af:fb:42:01 (try 1/3) [43296.345406] wlp2s0: RX AssocResp from e8:fc:af:fb:42:01 (capab=0x11 status=0 aid=6) [43296.345426] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 2), will use 2 [43296.345428] wlp2s0: AP has invalid WMM params (AIFSN=1 for ACI 3), will use 2 [43296.348544] wlp2s0: associated [43296.348852] ath: EEPROM regdomain: 0x8348 [43296.348855] ath: EEPROM indicates we should expect a country code [43296.348857] ath: doing EEPROM country->regdmn map search [43296.348862] ath: country maps to regdmn code: 0x3a [43296.348864] ath: Country alpha2 being used: US [43296.348866] ath: Regpair used: 0x3a [43296.348870] ath: regdomain 0x8348 dynamically updated by country element [43296.377641] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [43296.503980] wlp2s0: Limiting TX power to 30 (30 - 0) dBm as advertised by e8:fc:af:fb:42:01 [56519.183380] r8169 0000:01:00.0: invalid large VPD tag 7f at offset 0