Upgraded SSD to Patritot Burst 240MB and now sda1 ext4 goes read only

[Fonss]

at random times, the computer just goes read only and if I go to command line screen (by trying to reset the computer or trying to exit the desktop) this is what I get:
https://imgur.com/gallery/1Oaac3Y
unfortunatelly I cannot actually save any of the report to text so its not possible to paste, but a picture is worth about 732 words.

the dmesg output is included as attached file.

[Fonss (aomanchuria)]

Here are a few lines of the text as the computer goes to CLI in read only mode... All typed, so I could have a typo or three in there:

These lines sort of repeat about 10 times with different reference numbers. Inode related mesages are repeated in different order in sets of 10

[19157,793122] systemd-journald[278]: Failed to write entry (9 items, 257 bytes), ignoring: Read-only

[19160,791668] EXT4-fs error (device sda1): ext4_find_entry:1454: inode #5373953: comm unattended-upgr

[Fonss (aomanchuria)]

sudo smartctl --all /dev/sda
[sudo] password for user:

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-60-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: Patriot Burst
Serial Number: C44207870E6305356456
LU WWN Device Id: 0 000000 000000000
Firmware Version: SBFM91.2
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: Unknown(0x0ff8) (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Sep 7 14:22:15 2019 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
     was never started.
     Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
     without error or no self-test has ever
     been run.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
     No Auto Offline data collection support.
     Suspend Offline collection upon new
     command.
     Offline surface scan supported.
     Self-test supported.
     Conveyance Self-test supported.
     Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
     power-saving mode.
     Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
     General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 366
 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 161
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0
170 Unknown_Attribute 0x0003 057 057 010 Pre-fail Always - 482
173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 65538
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 66
194 Temperature_Celsius 0x0023 067 067 000 Pre-fail Always - 33 (Min/Max 33/33)
218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0
231 Temperature_Celsius 0x0013 100 100 000 P...

[Fonss (aomanchuria)]

I think the SSD report looks clean. I'm thinking that maybe there is a way to store whatever happened and then go to read only?? maybe that way I can get a glimpse of what may be going on. I read about a similiar issue with Samsung drives, but none of the software there actually applies to patriot drives.

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window:

apport-collect 1843146

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the Ubuntu Kernel Team.

[Fonss (aomanchuria)]

apport-collect 1843146 was run and uploaded per the app.