[ 0.000000] Linux version 4.18.0-18-generic (buildd@lcy01-amd64-006) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #19~18.04.1-Ubuntu SMP Fri Apr 5 10:22:13 UTC 2019 (Ubuntu 4.18.0-18.19~18.04.1-generic 4.18.20) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-18-generic root=UUID=88a770a0-dfd0-42f5-91bb-960353d1f1f6 ro quiet splash vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ae209fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ae20a000-0x00000000bcd3efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bcd3f000-0x00000000bce7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bce7f000-0x00000000bcefefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bceff000-0x00000000bf9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023e5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 20ALA0ARHH/20ALA0ARHH, BIOS GIET94WW (2.44 ) 09/20/2018 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x23e600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable [ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable [ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable [ 0.000000] 3 base 00BCF00000 mask 7FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0xae20a max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [(____ptrval____)] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1d4363000, 0x1d4363fff] PGTABLE [ 0.000000] BRK [0x1d4364000, 0x1d4364fff] PGTABLE [ 0.000000] BRK [0x1d4365000, 0x1d4365fff] PGTABLE [ 0.000000] BRK [0x1d4366000, 0x1d4366fff] PGTABLE [ 0.000000] BRK [0x1d4367000, 0x1d4367fff] PGTABLE [ 0.000000] BRK [0x1d4368000, 0x1d4368fff] PGTABLE [ 0.000000] BRK [0x1d4369000, 0x1d4369fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x335a9000-0x35acbfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 0x00000000BCEFE170 0000E4 (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: FACP 0x00000000BCEF8000 00010C (v05 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: DSDT 0x00000000BCEE2000 010C3E (v01 LENOVO TP-GI 00002440 INTL 20120711) [ 0.000000] ACPI: FACS 0x00000000BCE6A000 000040 [ 0.000000] ACPI: SLIC 0x00000000BCEFD000 000176 (v01 LENOVO TP-GI 00002440 PTEC 00000001) [ 0.000000] ACPI: DBGP 0x00000000BCEFB000 000034 (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: ECDT 0x00000000BCEFA000 000052 (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: HPET 0x00000000BCEF7000 000038 (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: APIC 0x00000000BCEF6000 000098 (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: MCFG 0x00000000BCEF5000 00003C (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000BCEF4000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCEF3000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCEE1000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCEE0000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCEDF000 0007F5 (v01 LENOVO Cpu0Ist 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCEDE000 000AD8 (v01 LENOVO CpuPm 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCEDC000 00125C (v01 LENOVO SaSsdt 00003000 INTL 20120711) [ 0.000000] ACPI: SSDT 0x00000000BCEDB000 000379 (v01 LENOVO CppcTabl 00001000 INTL 20120711) [ 0.000000] ACPI: PCCT 0x00000000BCEDA000 00006E (v05 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: SSDT 0x00000000BCED9000 000AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711) [ 0.000000] ACPI: TCPA 0x00000000BCED8000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.000000] ACPI: UEFI 0x00000000BCED7000 000042 (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: MSDM 0x00000000BCDD2000 000055 (v03 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: ASF! 0x00000000BCEFC000 0000A5 (v32 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: BATB 0x00000000BCED6000 000046 (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: FPDT 0x00000000BCED5000 000064 (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: UEFI 0x00000000BCED4000 0002A6 (v01 LENOVO TP-GI 00002440 PTEC 00000002) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023e5fffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x23e5d5000-0x23e5fffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023e5fffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ae209fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023e5fffff] [ 0.000000] Reserved but unavailable: 7770 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023e5fffff] [ 0.000000] On node 0 totalpages: 2017190 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11081 pages used for memmap [ 0.000000] DMA32 zone: 709130 pages, LIFO batch:31 [ 0.000000] Normal zone: 20376 pages used for memmap [ 0.000000] Normal zone: 1304064 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at [mem 0xbda00000-0xbf9fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x1808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xae20a000-0xbcd3efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbcd3f000-0xbce7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xbce7f000-0xbcefefff] [ 0.000000] PM: Registered nosave memory: [mem 0xbceff000-0xbf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe100fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] [mem 0xbfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1985648 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-18-generic root=UUID=88a770a0-dfd0-42f5-91bb-960353d1f1f6 ro quiet splash vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7807932K/8068760K available (12300K kernel code, 2634K rwdata, 4384K rodata, 2464K init, 2340K bss, 260828K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 40843 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 760, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.020000] tsc: Fast TSC calibration using PIT [ 0.024000] tsc: Detected 2294.689 MHz processor [ 0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x21139c00f92, max_idle_ns: 440795293667 ns [ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.37 BogoMIPS (lpj=9178756) [ 0.024000] pid_max: default: 32768 minimum: 301 [ 0.024000] Security Framework initialized [ 0.024000] Yama: becoming mindful. [ 0.024000] AppArmor: AppArmor initialized [ 0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.028839] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.028882] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.028913] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.029227] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.029228] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.029235] mce: CPU supports 7 MCE banks [ 0.029246] CPU0: Thermal monitoring enabled (TM1) [ 0.029263] process: using mwait in idle threads [ 0.029267] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.029268] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.029270] Spectre V2 : Mitigation: Full generic retpoline [ 0.029271] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.029271] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.029282] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.029282] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.029284] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.038885] Freeing SMP alternatives memory: 36K [ 0.040999] TSC deadline timer enabled [ 0.041002] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (family: 0x6, model: 0x45, stepping: 0x1) [ 0.041133] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.041203] ... version: 3 [ 0.041204] ... bit width: 48 [ 0.041204] ... generic registers: 4 [ 0.041206] ... value mask: 0000ffffffffffff [ 0.041207] ... max period: 00007fffffffffff [ 0.041207] ... fixed-purpose events: 3 [ 0.041208] ... event mask: 000000070000000f [ 0.041258] Hierarchical SRCU implementation. [ 0.043244] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.043267] smp: Bringing up secondary CPUs ... [ 0.043385] x86: Booting SMP configuration: [ 0.043387] .... node #0, CPUs: #1 #2 #3 [ 0.044979] smp: Brought up 1 node, 4 CPUs [ 0.044979] smpboot: Max logical packages: 2 [ 0.044979] smpboot: Total of 4 processors activated (18357.51 BogoMIPS) [ 0.048352] devtmpfs: initialized [ 0.048352] x86/mm: Memory block size: 128MB [ 0.049041] PM: Registering ACPI NVS region [mem 0xbcd3f000-0xbce7efff] (1310720 bytes) [ 0.049041] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.049041] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.049041] pinctrl core: initialized pinctrl subsystem [ 0.049041] RTC time: 20:35:05, date: 04/25/19 [ 0.049041] NET: Registered protocol family 16 [ 0.049041] audit: initializing netlink subsys (disabled) [ 0.049041] audit: type=2000 audit(1556224505.048:1): state=initialized audit_enabled=0 res=1 [ 0.049041] cpuidle: using governor ladder [ 0.049041] cpuidle: using governor menu [ 0.049041] Detected 1 PCC Subspaces [ 0.049041] Registering PCC driver as Mailbox controller [ 0.049041] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.049041] ACPI: bus type PCI registered [ 0.049041] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.049041] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.049041] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.049041] PCI: Using configuration type 1 for base access [ 0.049041] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.052911] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.052911] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.052911] ACPI: Added _OSI(Module Device) [ 0.052911] ACPI: Added _OSI(Processor Device) [ 0.052911] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052911] ACPI: Added _OSI(Processor Aggregator Device) [ 0.052911] ACPI: Added _OSI(Linux-Dell-Video) [ 0.052911] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.052911] ACPI: EC: EC started [ 0.052911] ACPI: EC: interrupt blocked [ 0.052911] ACPI: \: Used as first EC [ 0.052911] ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.052911] ACPI: \: Used as boot ECDT EC to handle transactions [ 0.080893] ACPI: 10 ACPI AML tables successfully acquired and loaded [ 0.083679] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.091583] ACPI Error: Needed type [Reference], found [Integer] (____ptrval____) (20180531/exresop-69) [ 0.091592] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20180531/dswexec-427) [ 0.091601] No Local Variables are initialized for Method [_PDC] [ 0.091604] Initialized Arguments for Method [_PDC]: (1 arguments defined for method invocation) [ 0.091605] Arg0: (____ptrval____) Buffer(12) 01 00 00 00 01 00 00 00 [ 0.091618] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20180531/psparse-516) [ 0.092301] ACPI: Dynamic OEM Table Load: [ 0.092314] ACPI: SSDT 0xFFFF9BAFB4976800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711) [ 0.093404] ACPI: Dynamic OEM Table Load: [ 0.093414] ACPI: SSDT 0xFFFF9BAFB49BB200 000119 (v01 PmRef ApCst 00003000 INTL 20120711) [ 0.095118] ACPI: Interpreter enabled [ 0.095157] ACPI: (supports S0 S3 S4 S5) [ 0.095158] ACPI: Using IOAPIC for interrupt routing [ 0.095197] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.095681] ACPI: Enabled 6 GPEs in block 00 to 7F [ 0.101321] ACPI: Power Resource [PUBS] (on) [ 0.101545] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.107280] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.107465] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11) [ 0.107645] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) [ 0.107825] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11) [ 0.108012] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.108148] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.108329] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11) [ 0.108508] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11) [ 0.108667] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) [ 0.108673] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.108943] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR] [ 0.109065] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.109068] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] [ 0.109071] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER] [ 0.109073] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM [ 0.109363] PCI host bridge to bus 0000:00 [ 0.109367] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.109369] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.109371] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.109374] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window] [ 0.109376] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.109378] pci_bus 0000:00: root bus resource [bus 00-3f] [ 0.109390] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000 [ 0.109519] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000 [ 0.109536] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] [ 0.109545] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.109551] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.109669] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300 [ 0.109684] pci 0000:00:03.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit] [ 0.109828] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330 [ 0.109850] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit] [ 0.109917] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.110013] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000 [ 0.110039] pci 0000:00:16.0: reg 0x10: [mem 0xe0639000-0xe063901f 64bit] [ 0.110115] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.110211] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000 [ 0.110231] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff] [ 0.110240] pci 0000:00:19.0: reg 0x14: [mem 0xe063e000-0xe063efff] [ 0.110249] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f] [ 0.110313] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.110410] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300 [ 0.110432] pci 0000:00:1b.0: reg 0x10: [mem 0xe0634000-0xe0637fff 64bit] [ 0.110507] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.110603] pci 0000:00:1c.0: [8086:9c1a] type 01 class 0x060400 [ 0.110683] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.110884] pci 0000:00:1c.1: [8086:9c14] type 01 class 0x060400 [ 0.110971] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.111172] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320 [ 0.111197] pci 0000:00:1d.0: reg 0x10: [mem 0xe063d000-0xe063d3ff] [ 0.111291] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.111396] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100 [ 0.111609] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601 [ 0.111627] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af] [ 0.111635] pci 0000:00:1f.2: reg 0x14: [io 0x30b4-0x30b7] [ 0.111643] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7] [ 0.111651] pci 0000:00:1f.2: reg 0x1c: [io 0x30b0-0x30b3] [ 0.111660] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.111668] pci 0000:00:1f.2: reg 0x24: [mem 0xe063c000-0xe063c7ff] [ 0.111708] pci 0000:00:1f.2: PME# supported from D3hot [ 0.111796] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500 [ 0.111816] pci 0000:00:1f.3: reg 0x10: [mem 0xe0638000-0xe06380ff 64bit] [ 0.111838] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.112014] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000 [ 0.112055] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0500fff] [ 0.112218] pci 0000:02:00.0: supports D1 D2 [ 0.112220] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.112396] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.112402] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff] [ 0.112659] pci 0000:03:00.0: [8086:08b2] type 00 class 0x028000 [ 0.112771] pci 0000:03:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit] [ 0.113161] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.113584] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.113590] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] [ 0.115309] ACPI: EC: interrupt unblocked [ 0.115333] ACPI: EC: event unblocked [ 0.115344] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.115347] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events [ 0.115663] SCSI subsystem initialized [ 0.115684] libata version 3.00 loaded. [ 0.115684] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.115684] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.115684] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.115684] vgaarb: loaded [ 0.115684] ACPI: bus type USB registered [ 0.115684] usbcore: registered new interface driver usbfs [ 0.115684] usbcore: registered new interface driver hub [ 0.115684] usbcore: registered new device driver usb [ 0.115684] pps_core: LinuxPPS API ver. 1 registered [ 0.115684] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.115684] PTP clock support registered [ 0.115684] EDAC MC: Ver: 3.0.0 [ 0.116187] PCI: Using ACPI for IRQ routing [ 0.117588] PCI: pci_cache_line_size set to 64 bytes [ 0.117912] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff] [ 0.117914] e820: reserve RAM buffer [mem 0xae20a000-0xafffffff] [ 0.117915] e820: reserve RAM buffer [mem 0x23e600000-0x23fffffff] [ 0.118063] NetLabel: Initializing [ 0.118064] NetLabel: domain hash size = 128 [ 0.118064] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.118084] NetLabel: unlabeled traffic allowed by default [ 0.118106] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.118106] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.120028] clocksource: Switched to clocksource tsc-early [ 0.136925] VFS: Disk quotas dquot_6.6.0 [ 0.136949] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.137105] AppArmor: AppArmor Filesystem Enabled [ 0.137145] pnp: PnP ACPI init [ 0.138063] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.138067] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.138069] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.138072] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved [ 0.138074] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.138077] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved [ 0.138079] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved [ 0.138081] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved [ 0.138084] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved [ 0.138086] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.138088] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.138091] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.138093] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.138096] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.138098] system 00:00: [mem 0x00100000-0xbf9fffff] could not be reserved [ 0.138101] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.138104] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.138112] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.138295] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff] [ 0.138323] system 00:01: [io 0x1800-0x189f] has been reserved [ 0.138326] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.138329] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.138331] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.138333] system 00:01: [io 0x0980-0x09ff] has been reserved [ 0.138336] system 00:01: [io 0x0a00-0x0a7f] has been reserved [ 0.138338] system 00:01: [io 0x0a80-0x0aff] has been reserved [ 0.138340] system 00:01: [io 0x0b00-0x0b7f] has been reserved [ 0.138345] system 00:01: [io 0x0b80-0x0bff] has been reserved [ 0.138347] system 00:01: [io 0x15e0-0x15ef] has been reserved [ 0.138350] system 00:01: [io 0x1600-0x167f] has been reserved [ 0.138352] system 00:01: [io 0x1640-0x165f] has been reserved [ 0.138356] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.138359] system 00:01: [mem 0x00000000-0x00000fff] could not be reserved [ 0.138361] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.138364] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.138366] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.138369] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.138371] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.138378] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.138469] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.138503] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active) [ 0.138532] pnp 00:04: Plug and Play ACPI device, IDs LEN0035 PNP0f13 (active) [ 0.138610] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.139443] pnp: PnP ACPI: found 6 devices [ 0.145723] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.145752] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.145758] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff] [ 0.145767] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.145772] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff] [ 0.145783] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.145785] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.145787] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.145790] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window] [ 0.145792] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] [ 0.145795] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff] [ 0.145797] pci_bus 0000:03: resource 1 [mem 0xe0400000-0xe04fffff] [ 0.145965] NET: Registered protocol family 2 [ 0.146239] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.146277] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.146432] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.146609] TCP: Hash tables configured (established 65536 bind 65536) [ 0.146659] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.146690] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.146771] NET: Registered protocol family 1 [ 0.146778] NET: Registered protocol family 44 [ 0.146791] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.147485] PCI: CLS 64 bytes, default 64 [ 0.147530] Unpacking initramfs... [ 0.984343] Freeing initrd memory: 38028K [ 0.984354] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.984358] software IO TLB [mem 0xaa20a000-0xae20a000] (64MB) mapped at [(____ptrval____)-(____ptrval____)] [ 0.984688] Scanning for low memory corruption every 60 seconds [ 0.985658] Initialise system trusted keyrings [ 0.985671] Key type blacklist registered [ 0.985720] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 0.987617] zbud: loaded [ 0.988372] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.988633] fuse init (API version 7.27) [ 0.988714] pstore: using deflate compression [ 0.990271] Key type asymmetric registered [ 0.990272] Asymmetric key parser 'x509' registered [ 0.990314] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 0.990360] io scheduler noop registered [ 0.990361] io scheduler deadline registered [ 0.990397] io scheduler cfq registered (default) [ 0.990921] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.991000] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 0.991001] vesafb: scrolling: redraw [ 0.991003] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.991016] vesafb: framebuffer at 0xc0000000, mapped to 0x(____ptrval____), using 4160k, total 4160k [ 0.991133] Console: switching to colour frame buffer device 170x48 [ 0.991158] fb0: VESA VGA frame buffer device [ 0.991181] intel_idle: MWAIT substates: 0x11142120 [ 0.991182] intel_idle: v0.4.1 model 0x45 [ 0.991491] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.991802] ACPI: AC Adapter [AC] (on-line) [ 0.991885] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.991902] ACPI: Lid Switch [LID] [ 0.991946] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1 [ 0.991956] ACPI: Sleep Button [SLPB] [ 0.992042] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.992052] ACPI: Power Button [PWRF] [ 0.994844] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.994846] ACPI: Thermal Zone [THM0] (51 C) [ 0.995077] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.997725] Linux agpgart interface v0.103 [ 1.004079] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) [ 1.009592] ACPI: Battery Slot [BAT0] (battery present) [ 1.014569] random: fast init done [ 1.023992] ACPI: Battery Slot [BAT1] (battery present) [ 1.066791] loop: module loaded [ 1.067047] libphy: Fixed MDIO Bus: probed [ 1.067049] tun: Universal TUN/TAP device driver, 1.6 [ 1.067084] PPP generic driver version 2.4.2 [ 1.067136] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.067139] ehci-pci: EHCI PCI platform driver [ 1.067333] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.067341] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.067354] ehci-pci 0000:00:1d.0: debug port 2 [ 1.071251] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.071267] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe063d000 [ 1.084077] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.084146] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.084149] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.084151] usb usb1: Product: EHCI Host Controller [ 1.084153] usb usb1: Manufacturer: Linux 4.18.0-18-generic ehci_hcd [ 1.084155] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.084443] hub 1-0:1.0: USB hub found [ 1.084450] hub 1-0:1.0: 3 ports detected [ 1.084695] ehci-platform: EHCI generic platform driver [ 1.084720] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.084725] ohci-pci: OHCI PCI platform driver [ 1.084738] ohci-platform: OHCI generic platform driver [ 1.084750] uhci_hcd: USB Universal Host Controller Interface driver [ 1.084934] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.084943] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.085997] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810 [ 1.086002] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.086184] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.086187] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.086188] usb usb2: Product: xHCI Host Controller [ 1.086190] usb usb2: Manufacturer: Linux 4.18.0-18-generic xhci-hcd [ 1.086192] usb usb2: SerialNumber: 0000:00:14.0 [ 1.086432] hub 2-0:1.0: USB hub found [ 1.086447] hub 2-0:1.0: 9 ports detected [ 1.089082] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.089087] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.089091] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 1.089133] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 1.089135] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.089137] usb usb3: Product: xHCI Host Controller [ 1.089139] usb usb3: Manufacturer: Linux 4.18.0-18-generic xhci-hcd [ 1.089141] usb usb3: SerialNumber: 0000:00:14.0 [ 1.089389] hub 3-0:1.0: USB hub found [ 1.089399] hub 3-0:1.0: 4 ports detected [ 1.090909] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.092705] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.092711] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.093063] mousedev: PS/2 mouse device common for all mice [ 1.093443] rtc_cmos 00:02: RTC can wake from S4 [ 1.093653] rtc_cmos 00:02: registered as rtc0 [ 1.093673] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.093696] i2c /dev entries driver [ 1.093702] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.093796] device-mapper: uevent: version 1.0.3 [ 1.093919] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.093929] intel_pstate: Intel P-state driver initializing [ 1.094138] ledtrig-cpu: registered to indicate activity on CPUs [ 1.094554] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.094777] NET: Registered protocol family 10 [ 1.099492] Segment Routing with IPv6 [ 1.099515] NET: Registered protocol family 17 [ 1.099550] Key type dns_resolver registered [ 1.099765] RAS: Correctable Errors collector initialized. [ 1.099801] microcode: sig=0x40651, pf=0x40, revision=0x24 [ 1.099840] microcode: Microcode Update Driver: v2.2. [ 1.099850] sched_clock: Marking stable (1099836298, 0)->(1078595224, 21241074) [ 1.100017] registered taskstats version 1 [ 1.100025] Loading compiled-in X.509 certificates [ 1.103094] Loaded X.509 cert 'Build time autogenerated kernel key: f8e50bb784a026944d779efa6a4082ac5a8d006f' [ 1.103124] zswap: loaded using pool lzo/zbud [ 1.106903] Key type big_key registered [ 1.106907] Key type trusted registered [ 1.108857] Key type encrypted registered [ 1.108861] AppArmor: AppArmor sha1 policy hashing enabled [ 1.120039] ima: Allocated hash algorithm: sha1 [ 1.215227] evm: Initialising EVM extended attributes: [ 1.215229] evm: security.selinux [ 1.215230] evm: security.SMACK64 [ 1.215231] evm: security.SMACK64EXEC [ 1.215231] evm: security.SMACK64TRANSMUTE [ 1.215232] evm: security.SMACK64MMAP [ 1.215233] evm: security.apparmor [ 1.215234] evm: security.ima [ 1.215234] evm: security.capability [ 1.215236] evm: HMAC attrs: 0x1 [ 1.215853] Magic number: 15:19:600 [ 1.215976] rtc_cmos 00:02: setting system clock to 2019-04-25 20:35:06 UTC (1556224506) [ 1.420033] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.424033] usb 2-4: new high-speed USB device number 2 using xhci_hcd [ 1.576454] usb 1-1: New USB device found, idVendor=8087, idProduct=8000, bcdDevice= 0.04 [ 1.576456] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.576730] hub 1-1:1.0: USB hub found [ 1.576825] hub 1-1:1.0: 8 ports detected [ 1.579738] usb 2-4: New USB device found, idVendor=1199, idProduct=a001, bcdDevice=17.29 [ 1.579740] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.579741] usb 2-4: Product: Sierra Wireless EM7345 4G LTE [ 1.579743] usb 2-4: Manufacturer: Sierra Wireless Inc. [ 1.579744] usb 2-4: SerialNumber: 013937001224466 [ 1.593428] Freeing unused kernel image memory: 2464K [ 1.600081] Write protecting the kernel read-only data: 20480k [ 1.601637] Freeing unused kernel image memory: 2008K [ 1.601941] Freeing unused kernel image memory: 1760K [ 1.610512] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.610512] x86/mm: Checking user space page tables [ 1.618819] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.632727] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.632817] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.632824] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.706996] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.706998] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.707208] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.708430] ahci 0000:00:1f.2: version 3.0 [ 1.718679] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode [ 1.718683] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst [ 1.719397] scsi host0: ahci [ 1.720057] scsi host1: ahci [ 1.720327] scsi host2: ahci [ 1.720395] ata1: SATA max UDMA/133 abar m2048@0xe063c000 port 0xe063c100 irq 43 [ 1.720397] ata2: DUMMY [ 1.720398] ata3: DUMMY [ 1.724021] usb 2-6: new full-speed USB device number 3 using xhci_hcd [ 1.873131] usb 2-6: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78 [ 1.873134] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.873136] usb 2-6: SerialNumber: 0206754320d8 [ 2.000032] usb 2-7: new full-speed USB device number 4 using xhci_hcd [ 2.016034] tsc: Refined TSC clocksource calibration: 2294.684 MHz [ 2.016041] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139776891, max_idle_ns: 440795250948 ns [ 2.044013] clocksource: Switched to clocksource tsc [ 2.044030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.045616] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.045619] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.045621] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.046994] ata1.00: ATA-8: SAMSUNG SSD PM810 2.5" 7mm 128GB, AXM08D1Q, max UDMA/133 [ 2.046996] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.047419] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 2.047421] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 2.047423] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 2.048760] ata1.00: configured for UDMA/133 [ 2.051285] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM81 8D1Q PQ: 0 ANSI: 5 [ 2.051516] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.051618] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 2.051635] sd 0:0:0:0: [sda] Write Protect is off [ 2.051637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.051661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.052790] sda: sda1 sda2 < sda5 sda6 > [ 2.053126] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.149560] usb 2-7: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01 [ 2.149563] usb 2-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.201130] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 2.269797] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 28:d2:44:ae:cd:e1 [ 2.269800] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 2.269848] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF [ 2.270900] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 2.276063] usb 2-8: new high-speed USB device number 5 using xhci_hcd [ 2.352396] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696] [ 2.383583] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..] [ 2.383588] psmouse serio1: synaptics: Trying to set up SMBus access [ 2.386351] psmouse serio1: synaptics: SMbus companion is not ready yet [ 2.447219] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2749, fw id: 1486693 [ 2.447228] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.485911] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.492468] usb 2-8: New USB device found, idVendor=5986, idProduct=0268, bcdDevice= 0.03 [ 2.492471] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.492474] usb 2-8: Product: Integrated Camera [ 2.492475] usb 2-8: Manufacturer: SunplusIT INC. [ 2.623209] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 2.898702] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.916323] systemd[1]: Detected architecture x86-64. [ 2.919174] systemd[1]: Set hostname to . [ 3.116538] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 3.145087] systemd[1]: Created slice User and Session Slice. [ 3.145132] systemd[1]: Reached target User and Group Name Lookups. [ 3.145171] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.145278] systemd[1]: Created slice System Slice. [ 3.145348] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.145390] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 3.145435] systemd[1]: Listening on Syslog Socket. [ 3.198158] lp: driver loaded but no devices found [ 3.205603] ppdev: user-space parallel port driver [ 3.207468] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 3.226363] bpfilter: Loaded bpfilter_umh pid 313 [ 3.246080] systemd-journald[284]: Received request to flush runtime journal from PID 1 [ 3.312186] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 [ 3.700220] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 3.700358] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00) [ 3.766914] Non-volatile memory driver v1.3 [ 3.771672] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.786474] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 3.786476] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 3.786477] thinkpad_acpi: ThinkPad BIOS GIET94WW (2.44 ), EC unknown [ 3.786479] thinkpad_acpi: Lenovo ThinkPad X240, model 20ALA0ARHH [ 3.787765] thinkpad_acpi: radio switch found; radios are enabled [ 3.787935] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 3.787936] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 3.797167] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 3.798383] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 3.809667] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.815702] thinkpad_acpi: battery 2 registered (start 0, stop 100) [ 3.817623] thinkpad_acpi: battery 1 registered (start 0, stop 100) [ 3.817628] battery: new extension: ThinkPad Battery Extension [ 3.817695] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input7 [ 3.839002] Intel(R) Wireless WiFi driver for Linux [ 3.839003] Copyright(c) 2003- 2015 Intel Corporation [ 3.849244] iwlwifi 0000:03:00.0: loaded firmware version 17.948900127.0 op_mode iwlmvm [ 3.868996] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 3.869009] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.869012] snd_hda_codec_realtek hdaudioC1D0: hp_outs=2 (0x16/0x15/0x0/0x0/0x0) [ 3.869013] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 3.869015] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 3.869018] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19 [ 3.869020] snd_hda_codec_realtek hdaudioC1D0: Mic=0x1a [ 3.869025] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 3.944767] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8 [ 3.944837] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 3.944903] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 3.944969] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11 [ 3.949550] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer [ 3.949552] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 3.949553] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.949553] RAPL PMU: hw unit of domain dram 2^-14 Joules [ 3.949554] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules [ 3.951869] checking generic (c0000000 410000) vs hw (c0000000 20000000) [ 3.951870] fb: switching to inteldrmfb from VESA VGA [ 3.951911] Console: switching to colour dummy device 80x25 [ 3.954431] [drm] Replacing VGA console driver [ 3.955255] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.955257] [drm] Driver supports precise vblank timestamp query. [ 3.955293] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.964223] iwlwifi 0000:03:00.0: Detected Intel(R) Wireless N 7260, REV=0x144 [ 3.986499] iwlwifi 0000:03:00.0: base HW address: e8:2a:ea:bd:46:7e [ 3.993917] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0 [ 3.996720] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.997370] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input12 [ 3.997608] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 4.011295] cryptd: max_cpu_qlen set to 1000 [ 4.036677] AVX2 version of gcm_enc/dec engaged. [ 4.036679] AES CTR mode by8 optimization enabled [ 4.193791] fbcon: inteldrmfb (fb0) is primary device [ 4.193891] Console: switching to colour frame buffer device 170x48 [ 4.193923] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.208031] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 4.226116] kvm: disabled by bios [ 4.246186] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 4.246239] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 4.246301] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15 [ 4.246407] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 4.246493] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 4.300144] intel_rapl: Found RAPL domain package [ 4.300146] intel_rapl: Found RAPL domain core [ 4.300148] intel_rapl: Found RAPL domain uncore [ 4.300149] intel_rapl: Found RAPL domain dram [ 4.324817] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0 [ 4.473495] Adding 7813116k swap on /dev/sda1. Priority:-2 extents:1 across:7813116k SSFS [ 4.716226] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 4.804356] Bluetooth: Core ver 2.22 [ 4.804373] NET: Registered protocol family 31 [ 4.804374] Bluetooth: HCI device and connection manager initialized [ 4.804377] Bluetooth: HCI socket layer initialized [ 4.804379] Bluetooth: L2CAP socket layer initialized [ 4.804384] Bluetooth: SCO socket layer initialized [ 4.845287] cdc_acm 2-4:1.2: ttyACM0: USB ACM device [ 4.846353] usbcore: registered new interface driver cdc_acm [ 4.846354] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 4.847827] media: Linux media interface: v0.10 [ 4.854510] usbcore: registered new interface driver cdc_ncm [ 4.858902] usbcore: registered new interface driver cdc_wdm [ 4.859814] videodev: Linux video capture interface: v2.00 [ 4.907152] cdc_mbim 2-4:1.0: setting rx_max = 16384 [ 4.907817] cdc_mbim 2-4:1.0: cdc-wdm0: USB WDM device [ 4.908031] cdc_mbim 2-4:1.0 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, de:80:c4:64:33:1b [ 4.908076] usbcore: registered new interface driver cdc_mbim [ 4.911080] cdc_mbim 2-4:1.0 wwp0s20u4: renamed from wwan0 [ 4.964512] usbcore: registered new interface driver btusb [ 4.977392] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 4.985166] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 5.019509] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0268) [ 5.040792] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized! [ 5.040795] uvcvideo 2-8:1.0: Entity type for entity Extension 3 was not initialized! [ 5.040797] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized! [ 5.040799] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized! [ 5.040895] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input18 [ 5.040992] usbcore: registered new interface driver uvcvideo [ 5.040993] USB Video Class driver (1.1.1) [ 5.201397] Bluetooth: hci0: Intel firmware patch completed and activated [ 6.181960] audit: type=1400 audit(1556224511.460:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine" pid=889 comm="apparmor_parser" [ 6.181965] audit: type=1400 audit(1556224511.460:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4917/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=889 comm="apparmor_parser" [ 6.182582] audit: type=1400 audit(1556224511.460:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=888 comm="apparmor_parser" [ 6.182585] audit: type=1400 audit(1556224511.460:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=888 comm="apparmor_parser" [ 6.182588] audit: type=1400 audit(1556224511.460:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=888 comm="apparmor_parser" [ 6.182591] audit: type=1400 audit(1556224511.460:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=888 comm="apparmor_parser" [ 6.183283] audit: type=1400 audit(1556224511.460:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=887 comm="apparmor_parser" [ 6.183287] audit: type=1400 audit(1556224511.460:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=887 comm="apparmor_parser" [ 6.184493] audit: type=1400 audit(1556224511.464:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=892 comm="apparmor_parser" [ 6.185284] audit: type=1400 audit(1556224511.464:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=894 comm="apparmor_parser" [ 6.325644] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 6.325646] Bluetooth: BNEP filters: protocol multicast [ 6.325650] Bluetooth: BNEP socket layer initialized [ 7.227774] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 7.420255] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 7.430539] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 7.719963] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 7.982505] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 8.523687] wlp3s0: authenticate with 38:43:7d:c0:d8:bd [ 8.529627] wlp3s0: send auth to 38:43:7d:c0:d8:bd (try 1/3) [ 8.533839] wlp3s0: authenticated [ 8.534154] wlp3s0: associating with AP with corrupt probe response [ 8.536075] wlp3s0: associate with 38:43:7d:c0:d8:bd (try 1/3) [ 8.553379] wlp3s0: RX AssocResp from 38:43:7d:c0:d8:bd (capab=0x1411 status=0 aid=3) [ 8.554620] wlp3s0: associated [ 8.591559] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 38:43:7d:c0:d8:bd [ 8.771275] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready [ 12.824240] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 13.585273] acpi_call: loading out-of-tree module taints kernel. [ 13.585362] acpi_call: module verification failed: signature and/or required key missing - tainting kernel [ 13.628759] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:a31c:025f:4480:588f:682e:9db2:3393 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=97 TC=0 HOPLIMIT=1 FLOWLBL=502704 PROTO=UDP SPT=22161 DPT=161 LEN=57 [ 15.628813] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:a31c:025f:4480:588f:682e:9db2:3393 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=97 TC=0 HOPLIMIT=1 FLOWLBL=502704 PROTO=UDP SPT=22161 DPT=161 LEN=57 [ 17.628861] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=2a02:a31c:025f:4480:588f:682e:9db2:3393 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=97 TC=0 HOPLIMIT=1 FLOWLBL=502704 PROTO=UDP SPT=22161 DPT=161 LEN=57 [ 21.629110] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e8f6:0a98:adf4:48ab DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=97 TC=0 HOPLIMIT=1 FLOWLBL=279360 PROTO=UDP SPT=22161 DPT=161 LEN=57 [ 23.633236] [UFW BLOCK] IN=wlp3s0 OUT= MAC= SRC=fe80:0000:0000:0000:e8f6:0a98:adf4:48ab DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=97 TC=0 HOPLIMIT=1 FLOWLBL=279360 PROTO=UDP SPT=22161 DPT=161 LEN=57 [ 26.440868] rfkill: input handler disabled [ 27.063259] Bluetooth: RFCOMM TTY layer initialized [ 27.063274] Bluetooth: RFCOMM socket layer initialized [ 27.063280] Bluetooth: RFCOMM ver 1.11 [ 29.228152] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. [ 30.347121] random: crng init done [ 30.347124] random: 7 urandom warning(s) missed due to ratelimiting [ 607.222059] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 5437.488097] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e8:2a:ea:bd:46:7e:38:43:7d:c2:1a:c2:08:00 SRC=85.147.61.230 DST=192.168.0.199 LEN=40 TOS=0x00 PREC=0xE0 TTL=120 ID=20173 PROTO=UDP SPT=2759 DPT=44710 LEN=20 [ 5439.488398] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e8:2a:ea:bd:46:7e:38:43:7d:c2:1a:c2:08:00 SRC=85.147.61.230 DST=192.168.0.199 LEN=40 TOS=0x00 PREC=0xE0 TTL=120 ID=20196 PROTO=UDP SPT=2759 DPT=44710 LEN=20 [ 5443.607145] [UFW BLOCK] IN=wlp3s0 OUT= MAC=e8:2a:ea:bd:46:7e:38:43:7d:c2:1a:c2:08:00 SRC=85.147.61.230 DST=192.168.0.199 LEN=40 TOS=0x00 PREC=0xE0 TTL=121 ID=20245 PROTO=UDP SPT=2759 DPT=44710 LEN=20 [ 6010.374334] wlp3s0: deauthenticating from 38:43:7d:c0:d8:bd by local choice (Reason: 3=DEAUTH_LEAVING) [ 6025.035685] e1000e: enp0s25 NIC Link is Down [ 6026.838406] PM: suspend entry (deep) [ 6026.838408] PM: Syncing filesystems ... done. [ 6026.923861] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 6026.926397] OOM killer disabled. [ 6026.926398] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6026.927898] Suspending console(s) (use no_console_suspend to debug) [ 6027.074384] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6027.075514] sd 0:0:0:0: [sda] Stopping disk [ 6027.275741] e1000e: EEE TX LPI TIMER: 00000011 [ 6027.507059] ACPI: EC: interrupt blocked [ 6027.546720] ACPI: Preparing to enter system sleep state S3 [ 6027.550126] ACPI: EC: event blocked [ 6027.550127] ACPI: EC: EC stopped [ 6027.550128] PM: Saving platform NVS memory [ 6027.550214] Disabling non-boot CPUs ... [ 6027.566780] IRQ 45: no longer affine to CPU1 [ 6027.568450] smpboot: CPU 1 is now offline [ 6027.591029] IRQ 47: no longer affine to CPU2 [ 6027.592053] smpboot: CPU 2 is now offline [ 6027.614712] IRQ 23: no longer affine to CPU3 [ 6027.614718] IRQ 40: no longer affine to CPU3 [ 6027.615739] smpboot: CPU 3 is now offline [ 6027.617959] ACPI: Low-level resume complete [ 6027.618007] ACPI: EC: EC started [ 6027.618008] PM: Restoring platform NVS memory [ 6027.618387] Enabling non-boot CPUs ... [ 6027.618515] x86: Booting SMP configuration: [ 6027.618516] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6027.618986] cache: parent cpu1 should not be sleeping [ 6027.619358] CPU1 is up [ 6027.619389] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 6027.619828] cache: parent cpu2 should not be sleeping [ 6027.620029] CPU2 is up [ 6027.620054] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 6027.620488] cache: parent cpu3 should not be sleeping [ 6027.620696] CPU3 is up [ 6027.624164] ACPI: Waking up from system sleep state S3 [ 6027.631123] ACPI: EC: interrupt unblocked [ 6027.681314] usb usb2: root hub lost power or was reset [ 6027.681319] usb usb3: root hub lost power or was reset [ 6027.681829] ACPI: button: The lid device is not compliant to SW_LID. [ 6027.681845] ACPI: EC: event unblocked [ 6027.682507] sd 0:0:0:0: [sda] Starting disk [ 6027.928286] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 6028.040251] usb 2-4: reset high-speed USB device number 2 using xhci_hcd [ 6028.188566] usb 2-4: device firmware changed [ 6028.296204] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6028.296949] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 6028.296955] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6028.296959] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 6028.316365] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 6028.394406] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 6028.394413] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 6028.394418] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 6028.416204] ata1.00: configured for UDMA/133 [ 6028.592353] usb 2-8: reset high-speed USB device number 5 using xhci_hcd [ 6028.868383] usb 2-7: reset full-speed USB device number 4 using xhci_hcd [ 6029.021294] OOM killer enabled. [ 6029.021296] Restarting tasks ... [ 6029.033925] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 6029.033936] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 6029.037063] done. [ 6029.040238] usb 2-4: USB disconnect, device number 2 [ 6029.040323] cdc_mbim 2-4:1.0 wwp0s20u4: unregister 'cdc_mbim' usb-0000:00:14.0-4, CDC MBIM [ 6029.072798] PM: suspend exit [ 6029.183919] Bluetooth: hci0: Intel firmware patch completed and activated [ 6029.208188] usb 2-4: new high-speed USB device number 6 using xhci_hcd [ 6029.366763] usb 2-4: New USB device found, idVendor=8087, idProduct=0716, bcdDevice= 0.00 [ 6029.366766] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6029.620301] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 6029.808605] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 6029.812305] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 6029.839458] psmouse serio1: synaptics: queried max coordinates: x [..5710], y [..4696] [ 6029.870982] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1156..] [ 6029.870992] psmouse serio1: synaptics: Trying to set up SMBus access [ 6029.873702] psmouse serio1: synaptics: SMbus companion is not ready yet [ 6029.935281] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x127c00/0x0, board id: 2749, fw id: 1486693 [ 6029.935299] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 6029.974660] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input20 [ 6030.081615] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 6030.141708] usbcore: registered new interface driver usbserial_generic [ 6030.141726] usbserial: USB Serial support registered for generic [ 6030.144886] usbcore: registered new interface driver usb_serial_simple [ 6030.144913] usbserial: USB Serial support registered for carelink [ 6030.144938] usbserial: USB Serial support registered for zio [ 6030.144961] usbserial: USB Serial support registered for funsoft [ 6030.145013] usbserial: USB Serial support registered for flashloader [ 6030.145034] usbserial: USB Serial support registered for google [ 6030.145051] usbserial: USB Serial support registered for libtransistor [ 6030.145095] usbserial: USB Serial support registered for vivopay [ 6030.145115] usbserial: USB Serial support registered for moto_modem [ 6030.145128] usbserial: USB Serial support registered for motorola_tetra [ 6030.145143] usbserial: USB Serial support registered for novatel_gps [ 6030.145161] usbserial: USB Serial support registered for hp4x [ 6030.145174] usbserial: USB Serial support registered for suunto [ 6030.145186] usbserial: USB Serial support registered for siemens_mpi [ 6030.145210] usb_serial_simple 2-4:1.0: flashloader converter detected [ 6030.145620] usb 2-4: flashloader converter now attached to ttyUSB0 [ 6030.217208] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 6030.616817] psmouse serio3: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 6030.820819] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio3/input/input21 [ 6031.912363] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 6032.539895] usb 2-4: USB disconnect, device number 6 [ 6032.540571] flashloader ttyUSB0: flashloader converter now disconnected from ttyUSB0 [ 6032.540627] usb_serial_simple 2-4:1.0: device disconnected [ 6035.332240] usb 2-4: new high-speed USB device number 7 using xhci_hcd [ 6035.493085] usb 2-4: New USB device found, idVendor=1199, idProduct=a001, bcdDevice=17.29 [ 6035.493092] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6035.493097] usb 2-4: Product: Sierra Wireless EM7345 4G LTE [ 6035.493101] usb 2-4: Manufacturer: Sierra Wireless Inc. [ 6035.493104] usb 2-4: SerialNumber: 013937001224466 [ 6035.555922] cdc_mbim 2-4:1.0: setting rx_max = 16384 [ 6035.557181] cdc_mbim 2-4:1.0: cdc-wdm0: USB WDM device [ 6035.557884] cdc_mbim 2-4:1.0 wwan0: register 'cdc_mbim' at usb-0000:00:14.0-4, CDC MBIM, de:80:c4:64:33:1b [ 6035.562601] cdc_acm 2-4:1.2: ttyACM0: USB ACM device [ 6036.113841] cdc_mbim 2-4:1.0 wwp0s20u4: renamed from wwan0 [ 6056.553522] e1000e: enp0s25 NIC Link is Down [ 6058.374998] PM: suspend entry (deep) [ 6058.375000] PM: Syncing filesystems ... done. [ 6058.421010] Freezing user space processes ... (elapsed 0.002 seconds) done. [ 6058.423978] OOM killer disabled. [ 6058.423978] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6058.425574] Suspending console(s) (use no_console_suspend to debug) [ 6058.576268] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6058.578554] sd 0:0:0:0: [sda] Stopping disk [ 6058.773236] e1000e: EEE TX LPI TIMER: 00000011 [ 6058.773971] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 6058.773983] dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -16 [ 6058.773988] PM: Device 0000:00:14.0 failed to suspend async: error -16 [ 6058.959426] PM: Some devices failed to suspend, or early wake event detected [ 6058.961380] sd 0:0:0:0: [sda] Starting disk [ 6059.306220] OOM killer enabled. [ 6059.306221] Restarting tasks ... done. [ 6059.349522] PM: suspend exit [ 6059.349574] PM: suspend entry (s2idle) [ 6059.349575] PM: Syncing filesystems ... done. [ 6059.365270] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 6059.368370] OOM killer disabled. [ 6059.368371] Freezing remaining freezable tasks ... (elapsed 0.096 seconds) done. [ 6059.464673] Suspending console(s) (use no_console_suspend to debug) [ 6060.136228] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 6060.138483] sd 0:0:0:0: [sda] Stopping disk [ 6060.335736] e1000e: EEE TX LPI TIMER: 00000011 [ 6060.336436] pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 returns -16 [ 6060.336446] dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -16 [ 6060.336449] PM: Device 0000:00:14.0 failed to suspend async: error -16 [ 6060.518246] PM: Some devices failed to suspend, or early wake event detected [ 6060.520204] sd 0:0:0:0: [sda] Starting disk [ 6060.585118] xhci_hcd 0000:00:14.0: port 3 resume PLC timeout [ 6060.862025] OOM killer enabled. [ 6060.862027] Restarting tasks ... done. [ 6060.911124] PM: suspend exit [ 6060.917246] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 6061.104508] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready [ 6061.107409] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 6061.367028] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 6061.434419] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready [ 6075.964195] usb 2-6: reset full-speed USB device number 3 using xhci_hcd [ 6112.807477] wlp3s0: authenticate with 38:43:7d:c0:d8:bd [ 6112.812380] wlp3s0: send auth to 38:43:7d:c0:d8:bd (try 1/3) [ 6112.819960] wlp3s0: authenticated [ 6112.820175] wlp3s0: associating with AP with corrupt probe response [ 6112.823890] wlp3s0: associate with 38:43:7d:c0:d8:bd (try 1/3) [ 6112.841302] wlp3s0: RX AssocResp from 38:43:7d:c0:d8:bd (capab=0x1411 status=0 aid=3) [ 6112.843339] wlp3s0: associated [ 6112.888295] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by 38:43:7d:c0:d8:bd [ 6112.992042] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready