eagle import: Edgecuts in footprint are imported with width 0
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
KiCad |
Fix Released
|
Low
|
Seth Hillbrand |
Bug Description
The project HydraBus with eagle files required for this issue is open hardware and available on github in following link:
https:/
The interest in this project is it is not too complex and could be a very good point for KiCad in order to improve the EAGLE CAD Import
When we import this project with KiCad 6.0 nightly of even KiCad 5.0x there is different issues
So let's do it step by step with KiCad nightly kicad-r11991-
1) git clone https:/
2) Launch KiCad and Import Eagle Project Files => Choose hydrabus_
3) Choose project destination (create directory HydraBus_
kicad Information open with lot of warning about tKeepout(39) which is converted to Dwgs.User layer
As KiCad does not support KeepOut it is OK and it is minor issue
so click on OK
Now the board is displayed correctly so save it
4) "Perform design rule check" shows the error Board outline => Board outline does not form a closed plygon @(0.000 mm, 0.000 mm): PCB
The board outline is in the footprint U$1 but has been imported as width 0. This is very difficult to select and edit
Main description copied from lp:1808578
Application: kicad
Version: (6.0.0-
Libraries:
wxWidgets 3.0.4
Platform: Linux 4.18.0-3-amd64 x86_64, 64 bit, Little endian, wxGTK
Build Info:
wxWidgets: 3.0.4 (wchar_t,wx containers,
Boost: 1.67.0
OpenCASCADE Community Edition: 6.9.1
Compiler: GCC 8.2.0 with C++ ABI 1013
Build settings:
USE_
USE_
KICAD_
KICAD_
KICAD_
KICAD_
KICAD_
KICAD_
BUILD_
KICAD_
KICAD_
KICAD_SPICE=ON
description: | updated |
Changed in kicad: | |
milestone: | none → 5.1.0 |
importance: | Undecided → Low |
status: | New → Triaged |
Changed in kicad: | |
status: | Fix Committed → Fix Released |
Fixed in revision 69fc301bf354618 64d631eee2097c0 bff0af4ca5 /git.launchpad. net/kicad/ patch/? id=69fc301bf354 61864d631eee209 7c0bff0af4ca5
https:/