Increase DVB_MAX_ADAPTERS from 8 to 16 in kernel config

[Henry H]

I installed 12 dvb adapters in my setup and noticed, that the DVB_MAX_ADAPTERS is still limited to 8 instead of 16. This bug has been reported and confirmed in earlier versions of Ubuntu.

ProblemType: Bug
Description: Ubuntu 18.04.1 LTS
Release: 18.04
ProcVersionSignature: Ubuntu 4.15.0-42.45-generic 4.15.18
Uname: 4.15.0-42-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.15
Architecture: amd64

:~$ cat lspci-vnvn.log

00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0]
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:01.0 VGA compatible controller [0300]: Device [1234:1111] (rev 02) (prog-if 00 [VGA controller])
 Subsystem: Red Hat, Inc Device [1af4:1100]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Region 0: Memory at fb000000 (32-bit, prefetchable) [size=16M]
 Region 2: Memory at fea14000 (32-bit, non-prefetchable) [size=4K]
 Expansion ROM at 000c0000 [disabled] [size=128K]

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 4: I/O ports at 5040 [size=32]
 Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 17
 Region 4: I/O ports at 5060 [size=32]
 Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 4: I/O ports at 5080 [size=32]
 Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin D routed to IRQ 19
 Region 0: Memory at fea15000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 42
 Region 0: Memory at fea10000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee00000 Data: 4031
 Kernel driver in use: snd_hda_intel
 Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 24
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 00006000-00006fff
 Memory behind bridge: fe800000-fe9fffff
 Prefetchable memory behind bridge: 00000000fce00000-00000000fcffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <64ns, L1 <1us
   ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+
   Slot #0, PowerLimit 0.000W; Interlock+ NoCompl-
  SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet- CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Off, PwrInd On, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd+
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
  Address: fee00000 Data: 4021
  Masking: 00000002 Pending: 00000000
 Capabilities: [40] Subsystem: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 [8086:0000]
 Capabilities: [100 v2] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 25
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 I/O behind bridge: 00007000-00007fff
 Memory behind bridge: fe600000-fe7fffff
 Prefetchable memory behind bridge: 00000000fcc00000-00000000fcdfffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <64ns, L1 <1us
   ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+
   Slot #0, PowerLimit 0.000W; Interlock+ NoCompl-
  SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet- CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Off, PwrInd On, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd+
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
  Address: fee01000 Data: 4022
  Masking: 00000002 Pending: 00000000
 Capabilities: [40] Subsystem: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 [8086:0000]
 Capabilities: [100 v2] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 26
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
 I/O behind bridge: 00008000-00008fff
 Memory behind bridge: fe400000-fe5fffff
 Prefetchable memory behind bridge: 00000000fca00000-00000000fcbfffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <64ns, L1 <1us
   ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+
   Slot #0, PowerLimit 0.000W; Interlock+ NoCompl-
  SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet- CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Off, PwrInd On, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd+
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
  Address: fee00000 Data: 4022
  Masking: 00000002 Pending: 00000000
 Capabilities: [40] Subsystem: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 [8086:0000]
 Capabilities: [100 v2] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 [8086:3420] (rev 02) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 27
 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
 I/O behind bridge: 00009000-00009fff
 Memory behind bridge: fe200000-fe3fffff
 Prefetchable memory behind bridge: 00000000fc800000-00000000fc9fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <64ns, L1 <1us
   ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn+ PwrCtrl+ MRL- AttnInd+ PwrInd+ HotPlug+ Surprise+
   Slot #0, PowerLimit 0.000W; Interlock+ NoCompl-
  SltCtl: Enable: AttnBtn+ PwrFlt- MRL- PresDet- CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Off, PwrInd Off, Power+ Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported ARIFwd+
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled ARIFwd-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [60] MSI: Enable+ Count=1/2 Maskable+ 64bit-
  Address: fee01000 Data: 4023
  Masking: 00000002 Pending: 00000000
 Capabilities: [40] Subsystem: Intel Corporation 7500/5520/5500/X58 I/O Hub PCI Express Root Port 0 [8086:0000]
 Capabilities: [100 v2] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 4: I/O ports at 50a0 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 17
 Region 4: I/O ports at 50c0 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 4: I/O ports at 50e0 [size=32]
 Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin D routed to IRQ 19
 Region 0: Memory at fea16000 (32-bit, non-prefetchable) [size=4K]
 Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=05, subordinate=09, sec-latency=0
 I/O behind bridge: 00001000-00004fff
 Memory behind bridge: fd800000-fe1fffff
 Prefetchable memory behind bridge: 00000000fc000000-00000000fc7fffff
 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Subsystem: Device [0000:0000]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Kernel driver in use: lpc_ich
 Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0])
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 35
 Region 4: I/O ports at 5100 [size=32]
 Region 5: Memory at fea17000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee00000 Data: 4033
 Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
 Kernel driver in use: ahci
 Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
 Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 16
 Region 4: I/O ports at 0700 [size=64]
 Kernel driver in use: i801_smbus
 Kernel modules: i2c_i801

01:00.0 Multimedia video controller [0400]: Spin Master Ltd. PCIe Video Bridge [1ade:3038] (rev 01)
 Subsystem: Technotrend Systemtechnik GmbH TT-budget S2-4200 Twin [13c2:3016]
 Physical Slot: 0
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 43
 Region 0: Memory at fe800000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [40] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] MSI: Enable+ Count=1/16 Maskable- 64bit+
  Address: 00000000fee01000 Data: 4031
 Capabilities: [70] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited
   ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
  LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Kernel driver in use: SMI PCIe driver
 Kernel modules: smipcie

02:00.0 Multimedia video controller [0400]: Spin Master Ltd. PCIe Video Bridge [1ade:3038] (rev 01)
 Subsystem: Technotrend Systemtechnik GmbH TT-budget S2-4200 Twin [13c2:3016]
 Physical Slot: 0-1
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at fe600000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [40] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] MSI: Enable- Count=1/16 Maskable- 64bit+
  Address: 0000000000000000 Data: 0000
 Capabilities: [70] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 unlimited
   ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
  LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Kernel modules: smipcie

03:00.0 Multimedia controller [0480]: Digital Devices GmbH Octopus DVB Adapter [dd01:0003]
 Subsystem: Digital Devices GmbH Cine CT V6.1 DVB adapter [dd01:0030]
 Physical Slot: 0-2
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 32 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=64K]
 Capabilities: [50] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [70] MSI: Enable- Count=1/2 Maskable- 64bit+
  Address: 0000000000000000 Data: 0000
 Capabilities: [90] Express (v2) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s unlimited, L1 <1us
   ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  DevCap2: Completion Timeout: Range A, TimeoutDis+, LTR-, OBFF Not Supported
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
    EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
 Capabilities: [100 v1] Vendor Specific Information: ID=0000 Rev=0 Len=00c <?>
 Kernel driver in use: ddbridge
 Kernel modules: ddbridge

05:01.0 PCI bridge [0604]: Red Hat, Inc. QEMU PCI-PCI bridge [1b36:0001] (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 38
 Region 0: Memory at fe000000 (64-bit, non-prefetchable) [size=256]
 Bus: primary=05, secondary=06, subordinate=06, sec-latency=0
 I/O behind bridge: 00004000-00004fff
 Memory behind bridge: fde00000-fdffffff
 Prefetchable memory behind bridge: 00000000fc600000-00000000fc7fffff
 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable+ 64bit+
  Address: 00000000fee00000 Data: 402e
  Masking: 00000000 Pending: 00000000
 Capabilities: [48] Slot ID: 0 slots, First+, chassis 01
 Capabilities: [40] Hot-plug capable
 Kernel driver in use: shpchp
 Kernel modules: shpchp

05:02.0 PCI bridge [0604]: Red Hat, Inc. QEMU PCI-PCI bridge [1b36:0001] (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 39
 Region 0: Memory at fe001000 (64-bit, non-prefetchable) [size=256]
 Bus: primary=05, secondary=07, subordinate=07, sec-latency=0
 I/O behind bridge: 00003000-00003fff
 Memory behind bridge: fdc00000-fddfffff
 Prefetchable memory behind bridge: 00000000fc400000-00000000fc5fffff
 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable+ 64bit+
  Address: 00000000fee01000 Data: 402f
  Masking: 00000000 Pending: 00000000
 Capabilities: [48] Slot ID: 0 slots, First+, chassis 02
 Capabilities: [40] Hot-plug capable
 Kernel driver in use: shpchp
 Kernel modules: shpchp

05:03.0 PCI bridge [0604]: Red Hat, Inc. QEMU PCI-PCI bridge [1b36:0001] (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 40
 Region 0: Memory at fe002000 (64-bit, non-prefetchable) [size=256]
 Bus: primary=05, secondary=08, subordinate=08, sec-latency=0
 I/O behind bridge: 00002000-00002fff
 Memory behind bridge: fda00000-fdbfffff
 Prefetchable memory behind bridge: 00000000fc200000-00000000fc3fffff
 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable+ 64bit+
  Address: 00000000fee00000 Data: 402f
  Masking: 00000000 Pending: 00000000
 Capabilities: [48] Slot ID: 0 slots, First+, chassis 03
 Capabilities: [40] Hot-plug capable
 Kernel driver in use: shpchp
 Kernel modules: shpchp

05:04.0 PCI bridge [0604]: Red Hat, Inc. QEMU PCI-PCI bridge [1b36:0001] (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 41
 Region 0: Memory at fe003000 (64-bit, non-prefetchable) [size=256]
 Bus: primary=05, secondary=09, subordinate=09, sec-latency=0
 I/O behind bridge: 00001000-00001fff
 Memory behind bridge: fd800000-fd9fffff
 Prefetchable memory behind bridge: 00000000fc000000-00000000fc1fffff
 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [4c] MSI: Enable+ Count=1/1 Maskable+ 64bit+
  Address: 00000000fee01000 Data: 4030
  Masking: 00000000 Pending: 00000000
 Capabilities: [48] Slot ID: 0 slots, First+, chassis 04
 Capabilities: [40] Hot-plug capable
 Kernel driver in use: shpchp
 Kernel modules: shpchp

06:03.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon [1af4:1002]
 Subsystem: Red Hat, Inc Virtio memory balloon [1af4:0005]
 Physical Slot: 3
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 20
 Region 0: I/O ports at 40c0 [size=32]
 Region 4: Memory at fc600000 (64-bit, prefetchable) [size=16K]
 Capabilities: [84] Vendor Specific Information: VirtIO: <unknown>
  BAR=0 offset=00000000 size=00000000
 Capabilities: [70] Vendor Specific Information: VirtIO: Notify
  BAR=4 offset=00003000 size=00001000 multiplier=00000004
 Capabilities: [60] Vendor Specific Information: VirtIO: DeviceCfg
  BAR=4 offset=00002000 size=00001000
 Capabilities: [50] Vendor Specific Information: VirtIO: ISR
  BAR=4 offset=00001000 size=00001000
 Capabilities: [40] Vendor Specific Information: VirtIO: CommonCfg
  BAR=4 offset=00000000 size=00001000
 Kernel driver in use: virtio-pci

06:08.0 Communication controller [0780]: Red Hat, Inc Virtio console [1af4:1003]
 Subsystem: Red Hat, Inc Virtio console [1af4:0003]
 Physical Slot: 8
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 21
 Region 0: I/O ports at 4000 [size=64]
 Region 1: Memory at fde40000 (32-bit, non-prefetchable) [size=4K]
 Region 4: Memory at fc604000 (64-bit, prefetchable) [size=16K]
 Capabilities: [98] MSI-X: Enable+ Count=2 Masked-
  Vector table: BAR=1 offset=00000000
  PBA: BAR=1 offset=00000800
 Capabilities: [84] Vendor Specific Information: VirtIO: <unknown>
  BAR=0 offset=00000000 size=00000000
 Capabilities: [70] Vendor Specific Information: VirtIO: Notify
  BAR=4 offset=00003000 size=00001000 multiplier=00000004
 Capabilities: [60] Vendor Specific Information: VirtIO: DeviceCfg
  BAR=4 offset=00002000 size=00001000
 Capabilities: [50] Vendor Specific Information: VirtIO: ISR
  BAR=4 offset=00001000 size=00001000
 Capabilities: [40] Vendor Specific Information: VirtIO: CommonCfg
  BAR=4 offset=00000000 size=00001000
 Kernel driver in use: virtio-pci

06:0a.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001]
 Subsystem: Red Hat, Inc Virtio block device [1af4:0002]
 Physical Slot: 10
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 23
 Region 0: I/O ports at 4040 [size=64]
 Region 1: Memory at fde41000 (32-bit, non-prefetchable) [size=4K]
 Region 4: Memory at fc608000 (64-bit, prefetchable) [size=16K]
 Capabilities: [98] MSI-X: Enable+ Count=2 Masked-
  Vector table: BAR=1 offset=00000000
  PBA: BAR=1 offset=00000800
 Capabilities: [84] Vendor Specific Information: VirtIO: <unknown>
  BAR=0 offset=00000000 size=00000000
 Capabilities: [70] Vendor Specific Information: VirtIO: Notify
  BAR=4 offset=00003000 size=00001000 multiplier=00000004
 Capabilities: [60] Vendor Specific Information: VirtIO: DeviceCfg
  BAR=4 offset=00002000 size=00001000
 Capabilities: [50] Vendor Specific Information: VirtIO: ISR
  BAR=4 offset=00001000 size=00001000
 Capabilities: [40] Vendor Specific Information: VirtIO: CommonCfg
  BAR=4 offset=00000000 size=00001000
 Kernel driver in use: virtio-pci

06:0b.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001]
 Subsystem: Red Hat, Inc Virtio block device [1af4:0002]
 Physical Slot: 11
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 20
 Region 0: I/O ports at 4080 [size=64]
 Region 1: Memory at fde42000 (32-bit, non-prefetchable) [size=4K]
 Region 4: Memory at fc60c000 (64-bit, prefetchable) [size=16K]
 Capabilities: [98] MSI-X: Enable+ Count=2 Masked-
  Vector table: BAR=1 offset=00000000
  PBA: BAR=1 offset=00000800
 Capabilities: [84] Vendor Specific Information: VirtIO: <unknown>
  BAR=0 offset=00000000 size=00000000
 Capabilities: [70] Vendor Specific Information: VirtIO: Notify
  BAR=4 offset=00003000 size=00001000 multiplier=00000004
 Capabilities: [60] Vendor Specific Information: VirtIO: DeviceCfg
  BAR=4 offset=00002000 size=00001000
 Capabilities: [50] Vendor Specific Information: VirtIO: ISR
  BAR=4 offset=00001000 size=00001000
 Capabilities: [40] Vendor Specific Information: VirtIO: CommonCfg
  BAR=4 offset=00000000 size=00001000
 Kernel driver in use: virtio-pci

06:12.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000]
 Subsystem: Red Hat, Inc Virtio network device [1af4:0001]
 Physical Slot: 18
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 23
 Region 0: I/O ports at 40e0 [size=32]
 Region 1: Memory at fde43000 (32-bit, non-prefetchable) [size=4K]
 Region 4: Memory at fc610000 (64-bit, prefetchable) [size=16K]
 Expansion ROM at fde00000 [disabled] [size=256K]
 Capabilities: [98] MSI-X: Enable+ Count=3 Masked-
  Vector table: BAR=1 offset=00000000
  PBA: BAR=1 offset=00000800
 Capabilities: [84] Vendor Specific Information: VirtIO: <unknown>
  BAR=0 offset=00000000 size=00000000
 Capabilities: [70] Vendor Specific Information: VirtIO: Notify
  BAR=4 offset=00003000 size=00001000 multiplier=00000004
 Capabilities: [60] Vendor Specific Information: VirtIO: DeviceCfg
  BAR=4 offset=00002000 size=00001000
 Capabilities: [50] Vendor Specific Information: VirtIO: ISR
  BAR=4 offset=00001000 size=00001000
 Capabilities: [40] Vendor Specific Information: VirtIO: CommonCfg
  BAR=4 offset=00000000 size=00001000
 Kernel driver in use: virtio-pci

[Ubuntu Kernel Bot (ubuntu-kernel-bot)]

This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window:

apport-collect 1806867

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the Ubuntu Kernel Team.

[Kai-Heng Feng (kaihengfeng)]

Ok, it defaults to 16 since v4.10, so we should apply this to Bionic+.

[Kai-Heng Feng (kaihengfeng)]

I've increased the CONFIG_DVB_MAX_ADAPTERS to 16, please see if this helps:

https://people.canonical.com/~khfeng/lp1806867/

[Launchpad Janitor (janitor)]

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]