[ 0.000000] Linux version 4.18.0-10-generic (buildd@lgw01-amd64-060) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #11-Ubuntu SMP Thu Oct 11 15:13:55 UTC 2018 (Ubuntu 4.18.0-10.11-generic 4.18.12) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-10-generic root=UUID=58ee5c1b-4963-4adb-a704-b7758a00bf5b ro quiet splash amdgpu.dc=0 vt.handoff=1 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support. [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000086fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000087000-0x0000000000087fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000def7efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000def7f000-0x00000000df87efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000df87f000-0x00000000dfb7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000dfb7f000-0x00000000dfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f0200000-0x00000000f02fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001feffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000001ff000000-0x000000021effffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] e820: update [mem 0xd8459018-0xd8468c57] usable ==> usable [ 0.000000] e820: update [mem 0xd8459018-0xd8468c57] usable ==> usable [ 0.000000] extended physical RAM map: [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000086fff] usable [ 0.000000] reserve setup_data: [mem 0x0000000000087000-0x0000000000087fff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x000000000009ffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000d8459017] usable [ 0.000000] reserve setup_data: [mem 0x00000000d8459018-0x00000000d8468c57] usable [ 0.000000] reserve setup_data: [mem 0x00000000d8468c58-0x00000000def7efff] usable [ 0.000000] reserve setup_data: [mem 0x00000000def7f000-0x00000000df87efff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000df87f000-0x00000000dfb7efff] ACPI NVS [ 0.000000] reserve setup_data: [mem 0x00000000dfb7f000-0x00000000dfbfefff] ACPI data [ 0.000000] reserve setup_data: [mem 0x00000000dfbff000-0x00000000dfbfffff] usable [ 0.000000] reserve setup_data: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f0200000-0x00000000f02fffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000001feffffff] usable [ 0.000000] reserve setup_data: [mem 0x00000001ff000000-0x000000021effffff] reserved [ 0.000000] efi: EFI v2.50 by INSYDE Corp. [ 0.000000] efi: ESRT=0xdf227e58 ACPI 2.0=0xdfbfe014 SMBIOS=0xdf225000 PROP=0xd87072d8 TPMEventLog=0xd857a018 [ 0.000000] secureboot: Secure boot enabled [ 0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7 [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: HP HP Notebook/81F9, BIOS F.13 07/21/2016 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x1ff000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back [ 0.000000] 3 base 0000FF800000 mask FFFFFF800000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000021f000000 aka 8688M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0xdfc00 max_arch_pfn = 0x400000000 [ 0.000000] esrt: Reserving ESRT space from 0x00000000df227e58 to 0x00000000df227e90. [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [(____ptrval____)] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x14ff5c000, 0x14ff5cfff] PGTABLE [ 0.000000] BRK [0x14ff5d000, 0x14ff5dfff] PGTABLE [ 0.000000] BRK [0x14ff5e000, 0x14ff5efff] PGTABLE [ 0.000000] BRK [0x14ff5f000, 0x14ff5ffff] PGTABLE [ 0.000000] BRK [0x14ff60000, 0x14ff60fff] PGTABLE [ 0.000000] BRK [0x14ff61000, 0x14ff61fff] PGTABLE [ 0.000000] BRK [0x14ff62000, 0x14ff62fff] PGTABLE [ 0.000000] BRK [0x14ff63000, 0x14ff63fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x3da2f000-0x3fffdfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000DFBFE014 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000DFBC2188 0000F4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013) [ 0.000000] ACPI: FACP 0x00000000DFBF9000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: DSDT 0x00000000DFBEA000 008C5C (v01 HPQOEM SLIC-MPC 00040000 ACPI 00040000) [ 0.000000] ACPI: FACS 0x00000000DFB48000 000040 [ 0.000000] ACPI: UEFI 0x00000000DFBFD000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: MSDM 0x00000000DFBFC000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: ASF! 0x00000000DFBFB000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: BOOT 0x00000000DFBFA000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: HPET 0x00000000DFBF8000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: APIC 0x00000000DFBF7000 000090 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000) [ 0.000000] ACPI: MCFG 0x00000000DFBF6000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: SPCR 0x00000000DFBF5000 000050 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: WDAT 0x00000000DFBF4000 00017C (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: WDRT 0x00000000DFBF3000 000047 (v01 HPQOEM INSYDE 00000000 HP 00040000) [ 0.000000] ACPI: UEFI 0x00000000DFBE9000 000042 (v01 HPQOEM INSYDE 00000000 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBE2000 0065E4 (v01 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBE1000 0009F8 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBD8000 0087BF (v02 HPQOEM INSYDE 00000002 ACPI 00040000) [ 0.000000] ACPI: IVRS 0x00000000DFBD7000 0000D0 (v02 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: CRAT 0x00000000DFBD6000 000528 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: VFCT 0x00000000DFBC6000 00FC84 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBC5000 000482 (v01 HPQOEM INSYDE 00001000 ACPI 00040000) [ 0.000000] ACPI: TPM2 0x00000000DFBC4000 000034 (v03 HPQOEM INSYDE 00000002 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBC3000 000692 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBC0000 001A89 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBBE000 001654 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x00000000DFBBD000 000044 (v01 HPQOEM SLIC-MPC 00000002 HP 00040000) [ 0.000000] ACPI: SSDT 0x00000000DFBBA000 0021A3 (v01 HPQOEM INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x00000000DFBB9000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001feffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x1fefd5000-0x1feffffff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x00000001feffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000086fff] [ 0.000000] node 0: [mem 0x0000000000088000-0x000000000009ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000def7efff] [ 0.000000] node 0: [mem 0x00000000dfbff000-0x00000000dfbfffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001feffffff] [ 0.000000] Reserved but unavailable: 8418 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001feffffff] [ 0.000000] On node 0 totalpages: 1957662 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 22 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14206 pages used for memmap [ 0.000000] DMA32 zone: 909184 pages, LIFO batch:31 [ 0.000000] Normal zone: 16320 pages used for memmap [ 0.000000] Normal zone: 1044480 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] ACPI: SPCR: SPCR table version 1 [ 0.000000] ACPI: SPCR: console: uart,io,0x3f8,115200 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00087000-0x00087fff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd8459000-0xd8459fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd8468000-0xd8468fff] [ 0.000000] PM: Registered nosave memory: [mem 0xdef7f000-0xdf87efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdf87f000-0xdfb7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfb7f000-0xdfbfefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf01fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0200000-0xf02fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0300000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed80fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed81000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff] [ 0.000000] [mem 0xe0000000-0xf01fffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288 [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1927050 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-10-generic root=UUID=58ee5c1b-4963-4adb-a704-b7758a00bf5b ro quiet splash amdgpu.dc=0 vt.handoff=1 [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 7522356K/7830648K available (12300K kernel code, 2633K rwdata, 4348K rodata, 2440K init, 2336K bss, 308292K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 40807 entries in 160 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 524544, nr_irqs: 1000, preallocated irqs: 16 [ 0.000000] vt handoff: transparent VT on vt#1 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration using PIT [ 0.028000] tsc: Detected 2495.380 MHz processor [ 0.028000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x23f82d6885e, max_idle_ns: 440795229999 ns [ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.76 BogoMIPS (lpj=9981520) [ 0.028000] pid_max: default: 32768 minimum: 301 [ 0.032125] Security Framework initialized [ 0.032128] Yama: becoming mindful. [ 0.032155] AppArmor: AppArmor initialized [ 0.037370] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.038451] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.038507] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.038542] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.038822] mce: CPU supports 7 MCE banks [ 0.038833] LVT offset 1 assigned for vector 0xf9 [ 0.038839] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.038840] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.038843] Spectre V2 : Mitigation: Full AMD retpoline [ 0.038843] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.038844] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.044537] Freeing SMP alternatives memory: 36K [ 0.056000] smpboot: CPU0: AMD A12-9700P RADEON R7, 10 COMPUTE CORES 4C+6G (family: 0x15, model: 0x65, stepping: 0x1) [ 0.056000] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.056000] ... version: 0 [ 0.056000] ... bit width: 48 [ 0.056000] ... generic registers: 6 [ 0.056000] ... value mask: 0000ffffffffffff [ 0.056000] ... max period: 00007fffffffffff [ 0.056000] ... fixed-purpose events: 0 [ 0.056000] ... event mask: 000000000000003f [ 0.056000] Hierarchical SRCU implementation. [ 0.056000] smp: Bringing up secondary CPUs ... [ 0.056000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.056000] x86: Booting SMP configuration: [ 0.056000] .... node #0, CPUs: #1 #2 #3 [ 0.060065] smp: Brought up 1 node, 4 CPUs [ 0.060065] smpboot: Max logical packages: 1 [ 0.060065] smpboot: Total of 4 processors activated (19963.04 BogoMIPS) [ 0.061199] devtmpfs: initialized [ 0.061199] x86/mm: Memory block size: 128MB [ 0.064011] PM: Registering ACPI NVS region [mem 0xdf87f000-0xdfb7efff] (3145728 bytes) [ 0.064063] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.064063] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.064173] pinctrl core: initialized pinctrl subsystem [ 0.064315] RTC time: 14:23:46, date: 10/31/18 [ 0.064668] NET: Registered protocol family 16 [ 0.064803] audit: initializing netlink subsys (disabled) [ 0.064850] audit: type=2000 audit(1540995825.064:1): state=initialized audit_enabled=0 res=1 [ 0.064850] cpuidle: using governor ladder [ 0.068037] cpuidle: using governor menu [ 0.068161] Simple Boot Flag at 0x44 set to 0x1 [ 0.068193] ACPI: bus type PCI registered [ 0.068195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.068296] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.068321] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.068321] PCI: Using configuration type 1 for base access [ 0.072277] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.072277] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.072277] ACPI: Added _OSI(Module Device) [ 0.072277] ACPI: Added _OSI(Processor Device) [ 0.072277] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.072277] ACPI: Added _OSI(Processor Aggregator Device) [ 0.072277] ACPI: Added _OSI(Linux-Dell-Video) [ 0.072277] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.096227] ACPI: 9 ACPI AML tables successfully acquired and loaded [ 0.103538] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.109394] ACPI: EC: EC started [ 0.109395] ACPI: EC: interrupt blocked [ 0.109704] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as first EC [ 0.109707] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.109709] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions [ 0.109709] ACPI: Interpreter enabled [ 0.109740] ACPI: (supports S0 S3 S4 S5) [ 0.109741] ACPI: Using IOAPIC for interrupt routing [ 0.109946] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.110347] ACPI: Enabled 5 GPEs in block 00 to 1F [ 0.112330] ACPI: Power Resource [P0U2] (off) [ 0.112363] ACPI: Power Resource [P3U2] (off) [ 0.112759] ACPI: Power Resource [P0U3] (off) [ 0.112792] ACPI: Power Resource [P3U3] (off) [ 0.114444] ACPI: Power Resource [P0ST] (on) [ 0.114489] ACPI: Power Resource [P3ST] (on) [ 0.114610] ACPI: Power Resource [P0SA] (off) [ 0.114647] ACPI: Power Resource [P3SA] (off) [ 0.116417] ACPI: Power Resource [P0SD] (off) [ 0.116417] ACPI: Power Resource [P3SD] (off) [ 0.120249] ACPI BIOS Error (bug): Could not resolve [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20180531/psargs-330) [ 0.120258] Initialized Local Variables for Method [_STA]: [ 0.120259] Local0: (____ptrval____) Integer 0000000000000000 [ 0.120264] No Arguments are initialized for method [_STA] [ 0.120266] ACPI Error: Method parse/execution failed \_SB.WLBU._STA, AE_NOT_FOUND (20180531/psparse-516) [ 0.122624] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.122630] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.122635] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.122650] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.123078] PCI host bridge to bus 0000:00 [ 0.123080] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.123082] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.123084] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.123085] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] [ 0.123087] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 0.123088] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] [ 0.123090] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] [ 0.123091] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] [ 0.123093] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] [ 0.123094] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] [ 0.123096] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] [ 0.123097] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] [ 0.123098] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] [ 0.123100] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] [ 0.123101] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] [ 0.123103] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window] [ 0.123104] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff window] [ 0.123106] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.123115] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000 [ 0.123231] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600 [ 0.123359] pci 0000:00:01.0: [1002:9874] type 00 class 0x030000 [ 0.123377] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.123385] pci 0000:00:01.0: reg 0x18: [mem 0xf0800000-0xf0ffffff 64bit pref] [ 0.123391] pci 0000:00:01.0: reg 0x20: [io 0x4000-0x40ff] [ 0.123396] pci 0000:00:01.0: reg 0x24: [mem 0xf0500000-0xf053ffff] [ 0.123402] pci 0000:00:01.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.123479] pci 0000:00:01.0: enabling Extended Tags [ 0.123487] pci 0000:00:01.0: BAR 0: assigned to efifb [ 0.123516] pci 0000:00:01.0: supports D1 D2 [ 0.123517] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.123632] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.123648] pci 0000:00:01.1: reg 0x10: [mem 0xf0560000-0xf0563fff 64bit] [ 0.123671] pci 0000:00:01.1: enabling Extended Tags [ 0.123699] pci 0000:00:01.1: supports D1 D2 [ 0.123783] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000 [ 0.123883] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400 [ 0.123916] pci 0000:00:02.2: enabling Extended Tags [ 0.123953] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.124069] pci 0000:00:02.4: [1022:157c] type 01 class 0x060400 [ 0.124137] pci 0000:00:02.4: enabling Extended Tags [ 0.124171] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.124262] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000 [ 0.124348] pci 0000:00:03.1: [1022:157c] type 01 class 0x060400 [ 0.124380] pci 0000:00:03.1: enabling Extended Tags [ 0.124416] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold [ 0.124509] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000 [ 0.124521] pci 0000:00:08.0: reg 0x10: [mem 0xf0540000-0xf055ffff 64bit pref] [ 0.124526] pci 0000:00:08.0: reg 0x18: [mem 0xf0300000-0xf03fffff] [ 0.124530] pci 0000:00:08.0: reg 0x1c: [mem 0xf0570000-0xf0570fff] [ 0.124537] pci 0000:00:08.0: reg 0x24: [mem 0xf056a000-0xf056bfff] [ 0.124621] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000 [ 0.124704] pci 0000:00:09.2: [1022:157a] type 00 class 0x040300 [ 0.124714] pci 0000:00:09.2: reg 0x10: [mem 0xf0564000-0xf0567fff] [ 0.124747] pci 0000:00:09.2: PME# supported from D0 D3hot D3cold [ 0.124838] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330 [ 0.124864] pci 0000:00:10.0: reg 0x10: [mem 0xf0568000-0xf0569fff 64bit] [ 0.124997] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.125085] pci 0000:00:11.0: [1022:7904] type 00 class 0x010601 [ 0.125102] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f] [ 0.125110] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127] [ 0.125118] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117] [ 0.125125] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123] [ 0.125133] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f] [ 0.125141] pci 0000:00:11.0: reg 0x24: [mem 0xf056c000-0xf056c3ff] [ 0.125175] pci 0000:00:11.0: PME# supported from D3hot [ 0.125400] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320 [ 0.125400] pci 0000:00:12.0: reg 0x10: [mem 0xf056e000-0xf056e0ff] [ 0.128280] pci 0000:00:12.0: supports D1 D2 [ 0.128282] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.128376] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 [ 0.128515] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 [ 0.128662] pci 0000:00:14.7: [1022:7906] type 00 class 0x080501 [ 0.128685] pci 0000:00:14.7: reg 0x10: [mem 0xf056d000-0xf056d0ff 64bit] [ 0.128751] pci 0000:00:14.7: PME# supported from D3cold [ 0.128841] pci 0000:00:18.0: [1022:1570] type 00 class 0x060000 [ 0.128927] pci 0000:00:18.1: [1022:1571] type 00 class 0x060000 [ 0.129034] pci 0000:00:18.2: [1022:1572] type 00 class 0x060000 [ 0.129110] pci 0000:00:18.3: [1022:1573] type 00 class 0x060000 [ 0.129182] pci 0000:00:18.4: [1022:1574] type 00 class 0x060000 [ 0.129249] pci 0000:00:18.5: [1022:1575] type 00 class 0x060000 [ 0.129396] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000 [ 0.129425] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.129496] pci 0000:01:00.0: reg 0x18: [mem 0xf0400000-0xf0400fff 64bit] [ 0.129515] pci 0000:01:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref] [ 0.129615] pci 0000:01:00.0: supports D1 D2 [ 0.129617] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.129754] pci 0000:00:02.2: PCI bridge to [bus 01] [ 0.129759] pci 0000:00:02.2: bridge window [io 0x3000-0x3fff] [ 0.129762] pci 0000:00:02.2: bridge window [mem 0xf0400000-0xf04fffff] [ 0.129767] pci 0000:00:02.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.129829] pci 0000:02:00.0: [8086:3165] type 00 class 0x028000 [ 0.129879] pci 0000:02:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit] [ 0.130048] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.130193] pci 0000:00:02.4: PCI bridge to [bus 02-05] [ 0.130197] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff] [ 0.130200] pci 0000:00:02.4: bridge window [mem 0xf1000000-0xf10fffff] [ 0.130205] pci 0000:00:02.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.130276] pci 0000:00:03.1: PCI bridge to [bus 06] [ 0.130561] ACPI: IRQ 7 override to edge, high [ 0.196578] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled. [ 0.196578] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled. [ 0.196596] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled. [ 0.196691] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled. [ 0.196780] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled. [ 0.196852] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled. [ 0.196928] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled. [ 0.197008] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled. [ 0.197090] ACPI BIOS Error (bug): Could not resolve [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20180531/psargs-330) [ 0.197101] Initialized Local Variables for Method [_STA]: [ 0.197101] Local0: (____ptrval____) Integer 0000000000000000 [ 0.197107] No Arguments are initialized for method [_STA] [ 0.197109] ACPI Error: Method parse/execution failed \_SB.WLBU._STA, AE_NOT_FOUND (20180531/psparse-516) [ 0.200505] ACPI: EC: interrupt unblocked [ 0.200514] ACPI: EC: event unblocked [ 0.200521] ACPI: \_SB_.PCI0.LPC0.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.200523] ACPI: \_SB_.PCI0.LPC0.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.200842] SCSI subsystem initialized [ 0.200864] libata version 3.00 loaded. [ 0.200864] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.200864] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.200864] pci 0000:00:01.0: vgaarb: bridge control possible [ 0.200864] vgaarb: loaded [ 0.200864] ACPI: bus type USB registered [ 0.200864] usbcore: registered new interface driver usbfs [ 0.200864] usbcore: registered new interface driver hub [ 0.200864] usbcore: registered new device driver usb [ 0.264547] ACPI BIOS Error (bug): Could not resolve [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20180531/psargs-330) [ 0.264561] Initialized Local Variables for Method [_STA]: [ 0.264562] Local0: (____ptrval____) Integer 0000000000000000 [ 0.264568] No Arguments are initialized for method [_STA] [ 0.264570] ACPI Error: Method parse/execution failed \_SB.WLBU._STA, AE_NOT_FOUND (20180531/psparse-516) [ 0.328550] ACPI BIOS Error (bug): Could not resolve [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20180531/psargs-330) [ 0.328565] Initialized Local Variables for Method [_STA]: [ 0.328565] Local0: (____ptrval____) Integer 0000000000000000 [ 0.328571] No Arguments are initialized for method [_STA] [ 0.328573] ACPI Error: Method parse/execution failed \_SB.WLBU._STA, AE_NOT_FOUND (20180531/psparse-516) [ 0.329239] pps_core: LinuxPPS API ver. 1 registered [ 0.329240] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.329243] PTP clock support registered [ 0.329390] EDAC MC: Ver: 3.0.0 [ 0.329390] Registered efivars operations [ 0.353483] PCI: Using ACPI for IRQ routing [ 0.353905] PCI: pci_cache_line_size set to 64 bytes [ 0.353973] e820: reserve RAM buffer [mem 0x00087000-0x0008ffff] [ 0.353975] e820: reserve RAM buffer [mem 0xd8459018-0xdbffffff] [ 0.353976] e820: reserve RAM buffer [mem 0xdef7f000-0xdfffffff] [ 0.353977] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff] [ 0.353978] e820: reserve RAM buffer [mem 0x1ff000000-0x1ffffffff] [ 0.356004] NetLabel: Initializing [ 0.356004] NetLabel: domain hash size = 128 [ 0.356004] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.356004] NetLabel: unlabeled traffic allowed by default [ 0.356095] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.356101] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.358297] clocksource: Switched to clocksource tsc-early [ 0.371757] VFS: Disk quotas dquot_6.6.0 [ 0.371779] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.371980] AppArmor: AppArmor Filesystem Enabled [ 0.372028] pnp: PnP ACPI init [ 0.372302] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.372304] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.372305] system 00:00: [mem 0xf0200000-0xf02fffff] has been reserved [ 0.372310] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.372452] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.372482] pnp 00:02: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active) [ 0.372503] pnp 00:03: Plug and Play ACPI device, IDs SYN3223 PNP0f13 (active) [ 0.372549] system 00:04: [io 0x0400-0x04cf] has been reserved [ 0.372551] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 0.372552] system 00:04: [io 0x04d6] has been reserved [ 0.372553] system 00:04: [io 0x0c00-0x0c01] has been reserved [ 0.372555] system 00:04: [io 0x0c14] has been reserved [ 0.372556] system 00:04: [io 0x0c50-0x0c52] has been reserved [ 0.372557] system 00:04: [io 0x0c6c] has been reserved [ 0.372559] system 00:04: [io 0x0c6f] has been reserved [ 0.372560] system 00:04: [io 0x0cd0-0x0cdb] has been reserved [ 0.372563] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.372627] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.372629] system 00:05: [mem 0xff800000-0xffffffff] has been reserved [ 0.372632] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.434629] ACPI BIOS Error (bug): Could not resolve [\_SB.WLBU._STA.WLVD], AE_NOT_FOUND (20180531/psargs-330) [ 0.434641] Initialized Local Variables for Method [_STA]: [ 0.434642] Local0: (____ptrval____) Integer 0000000000000000 [ 0.434646] No Arguments are initialized for method [_STA] [ 0.434648] ACPI Error: Method parse/execution failed \_SB.WLBU._STA, AE_NOT_FOUND (20180531/psparse-516) [ 0.435028] pnp: PnP ACPI: found 6 devices [ 0.475690] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.475701] pci 0000:00:01.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.475727] pci 0000:00:03.1: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 0.475730] pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000 [ 0.475731] pci 0000:00:03.1: bridge window [mem 0x00100000-0x000fffff] to [bus 06] add_size 200000 add_align 100000 [ 0.475751] pci 0000:00:03.1: BAR 14: assigned [mem 0xf0600000-0xf07fffff] [ 0.475760] pci 0000:00:03.1: BAR 15: assigned [mem 0xf1100000-0xf12fffff 64bit pref] [ 0.475764] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0580000-0xf059ffff pref] [ 0.475768] pci 0000:00:03.1: BAR 13: assigned [io 0x1000-0x1fff] [ 0.475771] pci 0000:00:02.2: PCI bridge to [bus 01] [ 0.475773] pci 0000:00:02.2: bridge window [io 0x3000-0x3fff] [ 0.475777] pci 0000:00:02.2: bridge window [mem 0xf0400000-0xf04fffff] [ 0.475779] pci 0000:00:02.2: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.475783] pci 0000:00:02.4: PCI bridge to [bus 02-05] [ 0.475785] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff] [ 0.475788] pci 0000:00:02.4: bridge window [mem 0xf1000000-0xf10fffff] [ 0.475791] pci 0000:00:02.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.475794] pci 0000:00:03.1: PCI bridge to [bus 06] [ 0.475796] pci 0000:00:03.1: bridge window [io 0x1000-0x1fff] [ 0.475799] pci 0000:00:03.1: bridge window [mem 0xf0600000-0xf07fffff] [ 0.475801] pci 0000:00:03.1: bridge window [mem 0xf1100000-0xf12fffff 64bit pref] [ 0.475807] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.475808] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.475809] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.475810] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] [ 0.475811] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] [ 0.475812] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] [ 0.475814] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] [ 0.475815] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] [ 0.475816] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] [ 0.475817] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] [ 0.475818] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] [ 0.475819] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] [ 0.475820] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] [ 0.475821] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] [ 0.475822] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] [ 0.475823] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff window] [ 0.475824] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfed3ffff window] [ 0.475826] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.475827] pci_bus 0000:01: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.475828] pci_bus 0000:01: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref] [ 0.475829] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.475830] pci_bus 0000:02: resource 1 [mem 0xf1000000-0xf10fffff] [ 0.475831] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.475833] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff] [ 0.475834] pci_bus 0000:06: resource 1 [mem 0xf0600000-0xf07fffff] [ 0.475835] pci_bus 0000:06: resource 2 [mem 0xf1100000-0xf12fffff 64bit pref] [ 0.475979] NET: Registered protocol family 2 [ 0.476307] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes) [ 0.476348] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.476536] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.476826] TCP: Hash tables configured (established 65536 bind 65536) [ 0.476903] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.476943] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.477102] NET: Registered protocol family 1 [ 0.477108] NET: Registered protocol family 44 [ 0.477128] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.477134] pci 0000:00:01.1: Linked as a consumer to 0000:00:01.0 [ 0.501494] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6c4 took 19509 usecs [ 0.501527] PCI: CLS 64 bytes, default 64 [ 0.501583] Unpacking initramfs... [ 1.067649] Freeing initrd memory: 38716K [ 1.067962] AMD-Vi: IOMMU performance counters supported [ 1.068204] pci 0000:00:00.2: can't derive routing for PCI INT A [ 1.068206] pci 0000:00:00.2: PCI INT A: not connected [ 1.068456] iommu: Adding device 0000:00:01.0 to group 0 [ 1.068515] iommu: Using direct mapping for device 0000:00:01.0 [ 1.068545] iommu: Adding device 0000:00:01.1 to group 0 [ 1.068592] iommu: Adding device 0000:00:02.0 to group 1 [ 1.068608] iommu: Adding device 0000:00:02.2 to group 1 [ 1.068623] iommu: Adding device 0000:00:02.4 to group 1 [ 1.068694] iommu: Adding device 0000:00:03.0 to group 2 [ 1.068712] iommu: Adding device 0000:00:03.1 to group 2 [ 1.068778] iommu: Adding device 0000:00:08.0 to group 3 [ 1.068842] iommu: Adding device 0000:00:09.0 to group 4 [ 1.068855] iommu: Adding device 0000:00:09.2 to group 4 [ 1.068921] iommu: Adding device 0000:00:10.0 to group 5 [ 1.068987] iommu: Adding device 0000:00:11.0 to group 6 [ 1.069058] iommu: Adding device 0000:00:12.0 to group 7 [ 1.069137] iommu: Adding device 0000:00:14.0 to group 8 [ 1.069152] iommu: Adding device 0000:00:14.3 to group 8 [ 1.069168] iommu: Adding device 0000:00:14.7 to group 8 [ 1.069264] iommu: Adding device 0000:00:18.0 to group 9 [ 1.069281] iommu: Adding device 0000:00:18.1 to group 9 [ 1.069296] iommu: Adding device 0000:00:18.2 to group 9 [ 1.069311] iommu: Adding device 0000:00:18.3 to group 9 [ 1.069325] iommu: Adding device 0000:00:18.4 to group 9 [ 1.069340] iommu: Adding device 0000:00:18.5 to group 9 [ 1.069361] iommu: Adding device 0000:01:00.0 to group 1 [ 1.069380] iommu: Adding device 0000:02:00.0 to group 1 [ 1.069900] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40 [ 1.069901] AMD-Vi: Extended features (0x37ef22294ada): [ 1.069902] PPR NX GT IA GA PC GA_vAPIC [ 1.069906] AMD-Vi: Interrupt remapping enabled [ 1.069906] AMD-Vi: virtual APIC enabled [ 1.070298] AMD-Vi: Lazy IO/TLB flushing enabled [ 1.071648] amd_uncore: AMD NB counters detected [ 1.071967] LVT offset 0 assigned for vector 0x400 [ 1.072041] perf: AMD IBS detected (0x000007ff) [ 1.072045] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank). [ 1.072113] Scanning for low memory corruption every 60 seconds [ 1.073141] Initialise system trusted keyrings [ 1.073160] Key type blacklist registered [ 1.073392] workingset: timestamp_bits=36 max_order=21 bucket_order=0 [ 1.074837] zbud: loaded [ 1.075662] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.076074] fuse init (API version 7.27) [ 1.076153] pstore: using deflate compression [ 1.079677] Key type asymmetric registered [ 1.079679] Asymmetric key parser 'x509' registered [ 1.079756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 1.079836] io scheduler noop registered [ 1.079837] io scheduler deadline registered [ 1.079875] io scheduler cfq registered (default) [ 1.080022] amd_gpio AMD0030:00: Failed to get gpio IRQ: -22 [ 1.080056] amd_gpio: probe of AMD0030:00 failed with error -22 [ 1.080644] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.080709] efifb: probing for efifb [ 1.080735] efifb: framebuffer at 0xe0000000, using 8100k, total 8100k [ 1.080736] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 1.080736] efifb: scrolling: redraw [ 1.080738] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.081137] Console: switching to colour frame buffer device 240x67 [ 1.081172] fb0: EFI VGA frame buffer device [ 1.082047] ACPI: AC Adapter [ACAD] (on-line) [ 1.082129] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.082137] ACPI: Power Button [PWRB] [ 1.082197] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 1.082210] ACPI: Lid Switch [LID] [ 1.082242] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.082256] ACPI: Power Button [PWRF] [ 1.083236] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.083237] ACPI: Thermal Zone [TSZ0] (49 C) [ 1.083355] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.083356] ACPI: Thermal Zone [TSZ2] (20 C) [ 1.083627] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.085577] Linux agpgart interface v0.103 [ 1.085878] tpm_crb MSFT0101:00: can't request region for resource [mem 0xdfb7a000-0xdfb7dfff] [ 1.085882] tpm_crb: probe of MSFT0101:00 failed with error -16 [ 1.087985] loop: module loaded [ 1.088427] libphy: Fixed MDIO Bus: probed [ 1.088428] tun: Universal TUN/TAP device driver, 1.6 [ 1.088469] PPP generic driver version 2.4.2 [ 1.088508] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.088511] ehci-pci: EHCI PCI platform driver [ 1.088750] ehci-pci 0000:00:12.0: EHCI Host Controller [ 1.088755] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.088767] ehci-pci 0000:00:12.0: debug port 2 [ 1.088821] ehci-pci 0000:00:12.0: irq 18, io mem 0xf056e000 [ 1.104310] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00 [ 1.104399] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.104401] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.104403] usb usb1: Product: EHCI Host Controller [ 1.104405] usb usb1: Manufacturer: Linux 4.18.0-10-generic ehci_hcd [ 1.104406] usb usb1: SerialNumber: 0000:00:12.0 [ 1.104615] hub 1-0:1.0: USB hub found [ 1.104621] hub 1-0:1.0: 2 ports detected [ 1.104841] ehci-platform: EHCI generic platform driver [ 1.104867] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.104869] ohci-pci: OHCI PCI platform driver [ 1.104882] ohci-platform: OHCI generic platform driver [ 1.104892] uhci_hcd: USB Universal Host Controller Interface driver [ 1.105037] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.105043] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 1.105229] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000410 [ 1.105563] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 1.105565] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.105566] usb usb2: Product: xHCI Host Controller [ 1.105567] usb usb2: Manufacturer: Linux 4.18.0-10-generic xhci-hcd [ 1.105568] usb usb2: SerialNumber: 0000:00:10.0 [ 1.105658] hub 2-0:1.0: USB hub found [ 1.105667] hub 2-0:1.0: 4 ports detected [ 1.105881] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 1.105886] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3 [ 1.105889] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed [ 1.112183] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.112214] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 1.112216] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.112218] usb usb3: Product: xHCI Host Controller [ 1.112219] usb usb3: Manufacturer: Linux 4.18.0-10-generic xhci-hcd [ 1.112220] usb usb3: SerialNumber: 0000:00:10.0 [ 1.112371] hub 3-0:1.0: USB hub found [ 1.112382] hub 3-0:1.0: 4 ports detected [ 1.112676] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.135316] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.135320] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.135625] mousedev: PS/2 mouse device common for all mice [ 1.135825] rtc_cmos 00:01: RTC can wake from S4 [ 1.135952] rtc_cmos 00:01: registered as rtc0 [ 1.135968] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.135977] i2c /dev entries driver [ 1.136028] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0 [ 1.136146] device-mapper: uevent: version 1.0.3 [ 1.136224] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 1.136279] ledtrig-cpu: registered to indicate activity on CPUs [ 1.136282] EFI Variables Facility v0.08 2004-May-17 [ 1.147492] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.165294] NET: Registered protocol family 10 [ 1.171527] Segment Routing with IPv6 [ 1.171560] NET: Registered protocol family 17 [ 1.171613] Key type dns_resolver registered [ 1.171939] RAS: Correctable Errors collector initialized. [ 1.172154] microcode: CPU0: patch_level=0x06006115 [ 1.172159] microcode: CPU1: patch_level=0x06006115 [ 1.172170] microcode: CPU2: patch_level=0x06006115 [ 1.172175] microcode: CPU3: patch_level=0x06006115 [ 1.172219] microcode: Microcode Update Driver: v2.2. [ 1.172235] sched_clock: Marking stable (1172213194, 0)->(1277541774, -105328580) [ 1.172467] registered taskstats version 1 [ 1.172479] Loading compiled-in X.509 certificates [ 1.176244] Loaded X.509 cert 'Build time autogenerated kernel key: c2af9a36da7641558368c66bd9a6950ecebd7ec0' [ 1.179448] Loaded UEFI:db cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' linked to secondary sys keyring [ 1.179479] Loaded UEFI:db cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' linked to secondary sys keyring [ 1.179501] Loaded UEFI:db cert 'Hewlett-Packard Company: HP UEFI Secure Boot 2013 DB key: 1d7cf2c2b92673f69c8ee1ec7063967ab9b62bec' linked to secondary sys keyring [ 1.182811] zswap: loaded using pool lzo/zbud [ 1.188821] Key type big_key registered [ 1.188828] Key type trusted registered [ 1.191653] Key type encrypted registered [ 1.191660] AppArmor: AppArmor sha1 policy hashing enabled [ 1.191671] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 1.191680] ima: Allocated hash algorithm: sha1 [ 1.191702] evm: Initialising EVM extended attributes: [ 1.191703] evm: security.selinux [ 1.191704] evm: security.SMACK64 [ 1.191705] evm: security.SMACK64EXEC [ 1.191705] evm: security.SMACK64TRANSMUTE [ 1.191705] evm: security.SMACK64MMAP [ 1.191706] evm: security.apparmor [ 1.191706] evm: security.ima [ 1.191707] evm: security.capability [ 1.191708] evm: HMAC attrs: 0x1 [ 1.198129] Magic number: 6:662:385 [ 1.198143] usb usb3: hash matches [ 1.198197] thermal cooling_device0: hash matches [ 1.198430] rtc_cmos 00:01: setting system clock to 2018-10-31 14:23:47 UTC (1540995827) [ 1.198736] acpi_cpufreq: overriding BIOS provided _PSD data [ 1.198963] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7 [ 1.228437] ACPI: Battery Slot [BAT1] (battery present) [ 1.440214] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.440216] usb 2-1: new high-speed USB device number 2 using xhci_hcd [ 1.596519] usb 1-1: New USB device found, idVendor=0438, idProduct=7900, bcdDevice= 0.18 [ 1.596523] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.596783] hub 1-1:1.0: USB hub found [ 1.596882] hub 1-1:1.0: 4 ports detected [ 1.610552] usb 2-1: New USB device found, idVendor=04f2, idProduct=b56c, bcdDevice=88.03 [ 1.610555] usb 2-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 1.610558] usb 2-1: Product: HP TrueVision HD [ 1.610559] usb 2-1: Manufacturer: Generic [ 1.610560] usb 2-1: SerialNumber: 200901010001 [ 1.617190] Freeing unused kernel image memory: 2440K [ 1.624249] Write protecting the kernel read-only data: 20480k [ 1.625948] Freeing unused kernel image memory: 2008K [ 1.626757] Freeing unused kernel image memory: 1796K [ 1.635714] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.722155] cmi: probe of SMB0001:00 failed with error -5 [ 1.742781] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.742794] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.743350] r8169 0000:01:00.0 eth0: RTL8106e, 98:e7:f4:d7:24:64, XID 44900000, IRQ 33 [ 1.756628] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 1.756632] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection [ 1.756748] sdhci: Secure Digital Host Controller Interface driver [ 1.756748] sdhci: Copyright(c) Pierre Ossman [ 1.758882] ahci 0000:00:11.0: version 3.0 [ 1.759141] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 1.759144] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 1.759980] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7906] (rev 1) [ 1.761321] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit [ 1.768171] scsi host0: ahci [ 1.769033] scsi host1: ahci [ 1.769120] ata1: SATA max UDMA/133 abar m1024@0xf056c000 port 0xf056c100 irq 19 [ 1.769123] ata2: SATA max UDMA/133 abar m1024@0xf056c000 port 0xf056c180 irq 19 [ 1.779850] r8169 0000:01:00.0 enp1s0: renamed from eth0 [ 1.888246] usb 1-1.4: new full-speed USB device number 3 using ehci-pci [ 1.998206] usb 1-1.4: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01 [ 1.998209] usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.080246] tsc: Refined TSC clocksource calibration: 2495.315 MHz [ 2.080292] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f7f021988, max_idle_ns: 440795263180 ns [ 2.080419] clocksource: Switched to clocksource tsc [ 2.244287] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.244344] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.251419] ata1.00: ATA-9: ST2000LM003 HN-M201RAD, 2BE10001, max UDMA/133 [ 2.251422] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 2.257206] ata2.00: ATAPI: hp DVDRW DU8A6SH, DH61, max UDMA/133 [ 2.259275] ata1.00: configured for UDMA/133 [ 2.260116] scsi 0:0:0:0: Direct-Access ATA ST2000LM003 HN-M 0001 PQ: 0 ANSI: 5 [ 2.261122] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.261159] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 2.261160] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 2.261179] sd 0:0:0:0: [sda] Write Protect is off [ 2.261181] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.261199] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.273533] ata2.00: configured for UDMA/133 [ 2.290556] scsi 1:0:0:0: CD-ROM hp DVDRW DU8A6SH DH61 PQ: 0 ANSI: 5 [ 2.323907] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 2.326954] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.368499] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.368502] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.368707] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.368790] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.451404] random: fast init done [ 2.455557] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.502446] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 2.506801] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.506816] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.534457] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 2.534472] psmouse serio1: synaptics: Your touchpad (PNP: SYN3223 PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org. [ 2.598024] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3127, fw id: 8526786 [ 2.638089] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 6.253988] random: crng init done [ 6.253991] random: 7 urandom warning(s) missed due to ratelimiting [ 19.400259] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 20.987021] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 21.004789] systemd[1]: Detected architecture x86-64. [ 21.027631] systemd[1]: Set hostname to . [ 21.046510] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7 [ 22.825208] Lockdown: systemd: BPF is restricted; see man kernel_lockdown.7 [ 22.825222] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 22.825224] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 24.258254] systemd[1]: Reached target Remote File Systems. [ 24.258531] systemd[1]: Listening on udev Control Socket. [ 24.258710] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 24.258755] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 24.260104] systemd[1]: Created slice User and Session Slice. [ 24.564527] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro [ 24.847835] lp: driver loaded but no devices found [ 24.970351] systemd-journald[281]: Received request to flush runtime journal from PID 1 [ 25.007497] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ 25.113608] ppdev: user-space parallel port driver [ 25.456677] systemd-journald[281]: File /var/log/journal/fb5f552478d646eca5df6798493a9b70/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 31.109716] AMD0020:00: ttyS4 at MMIO 0xfedc6000 (irq = 10, base_baud = 3000000) is a 16550A [ 31.110345] AMD0020:01: ttyS5 at MMIO 0xfedc8000 (irq = 11, base_baud = 3000000) is a 16550A [ 31.189564] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 31.190694] acpi device:00: registered as cooling_device4 [ 31.190754] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 31.626737] wmi_bus wmi_bus-PNP0C14:00: WQBJ data block query control method not found [ 31.633003] input: HP Wireless hotkeys as /devices/virtual/input/input7 [ 31.952069] Bluetooth: Core ver 2.22 [ 31.952096] NET: Registered protocol family 31 [ 31.952097] Bluetooth: HCI device and connection manager initialized [ 31.952102] Bluetooth: HCI socket layer initialized [ 31.952105] Bluetooth: L2CAP socket layer initialized [ 31.952111] Bluetooth: SCO socket layer initialized [ 32.082748] usbcore: registered new interface driver btusb [ 32.097087] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 32.137582] [drm] amdgpu kernel modesetting enabled. [ 32.367119] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 32.371243] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 32.611735] cryptd: max_cpu_qlen set to 1000 [ 32.711006] AMD IOMMUv2 driver by Joerg Roedel [ 32.717061] Parsing CRAT table with 1 nodes [ 32.717079] Creating topology SYSFS entries [ 32.717107] Topology: Add APU node [0x0:0x0] [ 32.717108] Finished initializing topology [ 32.717226] kfd kfd: Initialized module [ 32.717857] checking generic (e0000000 7e9000) vs hw (e0000000 10000000) [ 32.717859] fb: switching to amdgpudrmfb from EFI VGA [ 32.717922] Console: switching to colour dummy device 80x25 [ 32.718895] [drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x103C:0x81F9 0xC9). [ 32.718912] [drm] register mmio base: 0xF0500000 [ 32.718913] [drm] register mmio size: 262144 [ 32.718924] [drm] add ip block number 0 [ 32.718925] [drm] add ip block number 1 [ 32.718926] [drm] add ip block number 2 [ 32.718927] [drm] add ip block number 3 [ 32.718928] [drm] add ip block number 4 [ 32.718930] [drm] add ip block number 5 [ 32.718931] [drm] add ip block number 6 [ 32.718932] [drm] add ip block number 7 [ 32.718933] [drm] add ip block number 8 [ 32.718934] [drm] add ip block number 9 [ 32.718986] [drm] UVD is enabled in physical mode [ 32.718988] [drm] VCE enabled in physical mode [ 32.719013] ATOM BIOS: 113-C75100-030 [ 32.719892] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 32.719902] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used) [ 32.719904] amdgpu 0000:00:01.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF [ 32.719950] [drm] Detected VRAM RAM=512M, BAR=512M [ 32.719951] [drm] RAM width 64bits UNKNOWN [ 32.720232] [TTM] Zone kernel: Available graphics memory: 3842380 kiB [ 32.720233] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 32.720234] [TTM] Initializing pool allocator [ 32.720240] [TTM] Initializing DMA pool allocator [ 32.720291] [drm] amdgpu: 512M of VRAM memory ready [ 32.720293] [drm] amdgpu: 3072M of GTT memory ready. [ 32.720305] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 32.720336] [drm] PCIE GART of 1024M enabled (table at 0x000000F4007E9000). [ 32.720460] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 32.720461] [drm] Driver supports precise vblank timestamp query. [ 32.725957] [drm] amdgpu atom DIG backlight initialized [ 32.725960] [drm] AMDGPU Display Connectors [ 32.725961] [drm] Connector 0: [ 32.725962] [drm] eDP-1 [ 32.725963] [drm] HPD1 [ 32.725964] [drm] DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b [ 32.725965] [drm] Encoders: [ 32.725966] [drm] LCD1: INTERNAL_UNIPHY [ 32.725966] [drm] Connector 1: [ 32.725967] [drm] HDMI-A-1 [ 32.725967] [drm] HPD2 [ 32.725968] [drm] DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f [ 32.725969] [drm] Encoders: [ 32.725969] [drm] DFP1: INTERNAL_UNIPHY [ 32.725970] [drm] Connector 2: [ 32.725970] [drm] DP-1 [ 32.725971] [drm] HPD3 [ 32.725972] [drm] DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873 [ 32.725972] [drm] Encoders: [ 32.725973] [drm] DFP2: INTERNAL_UNIPHY1 [ 32.785045] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 33.077178] Intel(R) Wireless WiFi driver for Linux [ 33.077180] Copyright(c) 2003- 2015 Intel Corporation [ 33.084275] media: Linux media interface: v0.10 [ 33.097430] AVX2 version of gcm_enc/dec engaged. [ 33.097432] AES CTR mode by8 optimization enabled [ 33.111172] Bluetooth: hci0: Intel firmware patch completed and activated [ 33.134307] videodev: Linux video capture interface: v2.00 [ 33.196175] [drm] Chained IB support enabled! [ 33.907069] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm [ 34.018649] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 3165, REV=0x210 [ 34.038395] iwlwifi 0000:02:00.0: base HW address: 84:ef:18:72:d8:55 [ 34.246890] uvcvideo: Found UVC 1.00 device HP TrueVision HD (04f2:b56c) [ 34.258227] uvcvideo 2-1:1.0: Entity type for entity Extension 4 was not initialized! [ 34.258231] uvcvideo 2-1:1.0: Entity type for entity Processing 2 was not initialized! [ 34.258232] uvcvideo 2-1:1.0: Entity type for entity Camera 1 was not initialized! [ 34.258309] input: HP TrueVision HD: HP TrueVision as /devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.0/input/input8 [ 34.258394] usbcore: registered new interface driver uvcvideo [ 34.258395] USB Video Class driver (1.1.1) [ 34.806883] [drm] Found UVD firmware Version: 1.91 Family ID: 11 [ 34.806904] [drm] UVD ENC is disabled [ 35.021206] [drm] Found VCE firmware Version: 52.4 Binary ID: 3 [ 35.054414] [drm] UVD initialized successfully. [ 35.171428] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 35.171851] thermal thermal_zone2: failed to read out thermal zone (-61) [ 35.253859] [drm] VCE initialized successfully. [ 35.256834] kfd kfd: Allocated 3969056 bytes on gart [ 35.256859] Topology: Add APU node [0x9874:0x1002] [ 35.256974] kfd kfd: added device 1002:9874 [ 35.509776] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 35.552796] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9 [ 35.565871] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3227: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 35.565874] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 35.565876] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 35.565878] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 35.565879] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 35.565881] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19 [ 35.565883] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12 [ 35.581129] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:09.2/sound/card1/input10 [ 35.581204] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:09.2/sound/card1/input11 [ 35.902378] kvm: Nested Virtualization enabled [ 35.902382] kvm: Nested Paging enabled [ 35.902383] SVM: Virtual VMLOAD VMSAVE supported [ 35.902384] SVM: Virtual GIF supported [ 35.941564] [drm] fb mappable at 0x1FFDC5000 [ 35.941566] [drm] vram apper at 0x1FF000000 [ 35.941567] [drm] size 8294400 [ 35.941568] [drm] fb depth is 24 [ 35.941569] [drm] pitch is 7680 [ 35.944609] fbcon: amdgpudrmfb (fb0) is primary device [ 35.944744] Console: switching to colour frame buffer device 240x67 [ 35.944785] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device [ 36.028562] MCE: In-kernel MCE decoding enabled. [ 36.043573] EDAC amd64: Node 0: DRAM ECC disabled. [ 36.043574] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 36.551007] [drm] Initialized amdgpu 3.26.0 20150101 for 0000:00:01.0 on minor 0 [ 37.728618] hp_wmi: query 0xd returned error 0x5 [ 37.728714] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 38.071500] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0 [ 42.335012] audit: type=1400 audit(1540995868.630:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=807 comm="apparmor_parser" [ 42.335020] audit: type=1400 audit(1540995868.630:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=807 comm="apparmor_parser" [ 42.335024] audit: type=1400 audit(1540995868.630:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=807 comm="apparmor_parser" [ 42.335027] audit: type=1400 audit(1540995868.630:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=807 comm="apparmor_parser" [ 42.344038] audit: type=1400 audit(1540995868.638:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=810 comm="apparmor_parser" [ 42.344044] audit: type=1400 audit(1540995868.638:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=810 comm="apparmor_parser" [ 42.344047] audit: type=1400 audit(1540995868.638:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=810 comm="apparmor_parser" [ 42.370180] audit: type=1400 audit(1540995868.666:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=811 comm="apparmor_parser" [ 42.370225] audit: type=1400 audit(1540995868.666:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=812 comm="apparmor_parser" [ 42.408803] audit: type=1400 audit(1540995868.706:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=814 comm="apparmor_parser" [ 52.179390] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 52.179394] Bluetooth: BNEP filters: protocol multicast [ 52.179404] Bluetooth: BNEP socket layer initialized [ 56.839224] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 57.108174] r8169 0000:01:00.0 enp1s0: link down [ 57.108306] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 57.115451] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 57.212746] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 57.743429] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 61.295672] wlo1: authenticate with c0:ff:d4:71:dd:c8 [ 61.300085] wlo1: send auth to c0:ff:d4:71:dd:c8 (try 1/3) [ 61.312987] wlo1: authenticated [ 61.316139] wlo1: associate with c0:ff:d4:71:dd:c8 (try 1/3) [ 61.319675] wlo1: RX AssocResp from c0:ff:d4:71:dd:c8 (capab=0x411 status=0 aid=8) [ 61.320908] wlo1: associated [ 61.338709] wlo1: Limiting TX power to 19 (22 - 3) dBm as advertised by c0:ff:d4:71:dd:c8 [ 61.442719] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 117.664672] Bluetooth: RFCOMM TTY layer initialized [ 117.664683] Bluetooth: RFCOMM socket layer initialized [ 117.664697] Bluetooth: RFCOMM ver 1.11 [ 122.075500] rfkill: input handler disabled [ 944.225744] r8169 0000:01:00.0: invalid large VPD tag 7f at offset 0 [ 1526.582399] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 1526.582406] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1526.591522] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 1526.591529] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1526.929334] wlo1: deauthenticating from c0:ff:d4:71:dd:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1530.941539] PM: suspend entry (deep) [ 1530.941544] PM: Syncing filesystems ... done. [ 1531.403144] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 1531.406255] OOM killer disabled. [ 1531.406256] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1531.408315] Suspending console(s) (use no_console_suspend to debug) [ 1531.425977] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1531.607574] sd 0:0:0:0: [sda] Stopping disk [ 1532.762024] ACPI: EC: interrupt blocked [ 1532.781877] pci_raw_set_power_state: 31 callbacks suppressed [ 1532.781885] snd_hda_intel 0000:00:09.2: Refused to change power state, currently in D0 [ 1532.801924] ACPI: Preparing to enter system sleep state S3 [ 1532.810201] ACPI: EC: event blocked [ 1532.810203] ACPI: EC: EC stopped [ 1532.810204] PM: Saving platform NVS memory [ 1532.810283] Disabling non-boot CPUs ... [ 1532.826448] IRQ 37: no longer affine to CPU1 [ 1532.827561] smpboot: CPU 1 is now offline [ 1532.850783] IRQ 35: no longer affine to CPU2 [ 1532.851832] smpboot: CPU 2 is now offline [ 1532.882702] IRQ 18: no longer affine to CPU3 [ 1532.882725] IRQ 28: no longer affine to CPU3 [ 1532.882731] IRQ 29: no longer affine to CPU3 [ 1532.882740] IRQ 33: no longer affine to CPU3 [ 1532.883787] smpboot: CPU 3 is now offline [ 1532.888683] ACPI: Low-level resume complete [ 1532.888725] ACPI: EC: EC started [ 1532.888726] PM: Restoring platform NVS memory [ 1532.888826] LVT offset 0 assigned for vector 0x400 [ 1532.889090] Enabling non-boot CPUs ... [ 1532.889171] x86: Booting SMP configuration: [ 1532.889172] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 1532.891503] cache: parent cpu1 should not be sleeping [ 1532.891594] microcode: CPU1: patch_level=0x06006115 [ 1532.891750] CPU1 is up [ 1532.891813] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 1532.894309] cache: parent cpu2 should not be sleeping [ 1532.894431] microcode: CPU2: patch_level=0x06006115 [ 1532.894666] CPU2 is up [ 1532.894686] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 1532.897085] cache: parent cpu3 should not be sleeping [ 1532.897192] microcode: CPU3: patch_level=0x06006115 [ 1532.897635] CPU3 is up [ 1532.898310] ACPI: Waking up from system sleep state S3 [ 1532.925268] ACPI: EC: interrupt unblocked [ 1532.965438] ACPI: EC: event unblocked [ 1532.966134] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [ 1532.966918] sd 0:0:0:0: [sda] Starting disk [ 1532.998225] [drm] UVD initialized successfully. [ 1533.198643] [drm] VCE initialized successfully. [ 1533.200161] r8169 0000:01:00.0 enp1s0: link down [ 1533.222588] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [ 1533.770442] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1533.784597] ata2.00: configured for UDMA/133 [ 1533.823710] acpi LNXPOWER:05: Turning OFF [ 1533.823773] OOM killer enabled. [ 1533.823773] Restarting tasks ... done. [ 1533.825954] thermal thermal_zone2: failed to read out thermal zone (-61) [ 1533.845481] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 1533.845491] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 1533.898153] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 1533.927605] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 1534.006553] PM: suspend exit [ 1534.171487] Bluetooth: hci0: Intel firmware patch completed and activated [ 1535.754566] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1535.768794] ata1.00: configured for UDMA/133 [ 1535.936776] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1536.146496] r8169 0000:01:00.0 enp1s0: link down [ 1536.146624] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1536.149754] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1536.246345] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1536.323839] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1539.956963] wlo1: authenticate with c0:ff:d4:71:dd:c8 [ 1539.962285] wlo1: send auth to c0:ff:d4:71:dd:c8 (try 1/3) [ 1539.964615] wlo1: authenticated [ 1539.970446] wlo1: associate with c0:ff:d4:71:dd:c8 (try 1/3) [ 1539.973900] wlo1: RX AssocResp from c0:ff:d4:71:dd:c8 (capab=0x411 status=0 aid=8) [ 1539.975100] wlo1: associated [ 1539.983763] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 1540.018403] wlo1: Limiting TX power to 19 (22 - 3) dBm as advertised by c0:ff:d4:71:dd:c8 [ 1710.737293] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 1710.737300] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1710.746113] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 1710.746119] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1710.953738] wlo1: deauthenticating from c0:ff:d4:71:dd:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1714.867187] PM: suspend entry (deep) [ 1714.867191] PM: Syncing filesystems ... done. [ 1715.367626] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 1715.371315] OOM killer disabled. [ 1715.371317] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 1715.373462] Suspending console(s) (use no_console_suspend to debug) [ 1715.398580] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1715.574924] sd 0:0:0:0: [sda] Stopping disk [ 1716.759550] ACPI: EC: interrupt blocked [ 1716.798310] ACPI: Preparing to enter system sleep state S3 [ 1716.804320] ACPI: EC: event blocked [ 1716.804321] ACPI: EC: EC stopped [ 1716.804322] PM: Saving platform NVS memory [ 1716.804403] Disabling non-boot CPUs ... [ 1716.818805] IRQ 37: no longer affine to CPU1 [ 1716.819917] smpboot: CPU 1 is now offline [ 1716.847124] IRQ 35: no longer affine to CPU2 [ 1716.848178] smpboot: CPU 2 is now offline [ 1716.875041] IRQ 18: no longer affine to CPU3 [ 1716.875054] IRQ 27: no longer affine to CPU3 [ 1716.875061] IRQ 30: no longer affine to CPU3 [ 1716.875068] IRQ 31: no longer affine to CPU3 [ 1716.875077] IRQ 33: no longer affine to CPU3 [ 1716.876127] smpboot: CPU 3 is now offline [ 1716.878935] ACPI: Low-level resume complete [ 1716.878990] ACPI: EC: EC started [ 1716.878991] PM: Restoring platform NVS memory [ 1716.879130] LVT offset 0 assigned for vector 0x400 [ 1716.879394] Enabling non-boot CPUs ... [ 1716.879506] x86: Booting SMP configuration: [ 1716.879507] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 1716.881845] cache: parent cpu1 should not be sleeping [ 1716.881933] microcode: CPU1: patch_level=0x06006115 [ 1716.882089] CPU1 is up [ 1716.882124] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 1716.884622] cache: parent cpu2 should not be sleeping [ 1716.884729] microcode: CPU2: patch_level=0x06006115 [ 1716.885141] CPU2 is up [ 1716.885209] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 1716.887607] cache: parent cpu3 should not be sleeping [ 1716.887708] microcode: CPU3: patch_level=0x06006115 [ 1716.888140] CPU3 is up [ 1716.888814] ACPI: Waking up from system sleep state S3 [ 1716.916102] ACPI: EC: interrupt unblocked [ 1716.961324] ACPI: EC: event unblocked [ 1716.962017] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [ 1716.962690] sd 0:0:0:0: [sda] Starting disk [ 1716.995059] [drm] UVD initialized successfully. [ 1717.194327] [drm] VCE initialized successfully. [ 1717.195843] r8169 0000:01:00.0 enp1s0: link down [ 1717.218923] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [ 1717.687897] OOM killer enabled. [ 1717.687898] Restarting tasks ... done. [ 1717.698208] thermal thermal_zone2: failed to read out thermal zone (-61) [ 1717.706207] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 1717.706419] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 1717.766755] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1717.779518] ata2.00: configured for UDMA/133 [ 1717.850831] PM: suspend exit [ 1717.890450] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 1717.920224] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 1718.029275] Bluetooth: hci0: Intel firmware patch completed and activated [ 1719.750877] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1719.764805] ata1.00: configured for UDMA/133 [ 1719.873421] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1720.082759] r8169 0000:01:00.0 enp1s0: link down [ 1720.082886] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1720.085990] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1720.181157] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1720.257794] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1723.565121] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 1723.565128] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1723.574148] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 1723.574155] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1723.871234] wlo1: authenticate with c0:ff:d4:71:dd:c8 [ 1723.876434] wlo1: send auth to c0:ff:d4:71:dd:c8 (try 1/3) [ 1723.878847] wlo1: authenticated [ 1723.882762] wlo1: associate with c0:ff:d4:71:dd:c8 (try 1/3) [ 1723.886775] wlo1: RX AssocResp from c0:ff:d4:71:dd:c8 (capab=0x411 status=0 aid=8) [ 1723.887974] wlo1: associated [ 1723.897291] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 1723.973043] wlo1: Limiting TX power to 19 (22 - 3) dBm as advertised by c0:ff:d4:71:dd:c8 [ 1784.206221] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 1784.206228] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1784.215614] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 1784.215621] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1784.410250] wlo1: deauthenticating from c0:ff:d4:71:dd:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1788.866767] PM: suspend entry (deep) [ 1788.866771] PM: Syncing filesystems ... done. [ 1789.391830] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 1789.395711] OOM killer disabled. [ 1789.395712] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1789.397698] Suspending console(s) (use no_console_suspend to debug) [ 1789.417321] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1789.595961] sd 0:0:0:0: [sda] Stopping disk [ 1790.776378] ACPI: EC: interrupt blocked [ 1790.813276] ACPI: Preparing to enter system sleep state S3 [ 1790.821714] ACPI: EC: event blocked [ 1790.821716] ACPI: EC: EC stopped [ 1790.821717] PM: Saving platform NVS memory [ 1790.821794] Disabling non-boot CPUs ... [ 1790.839313] smpboot: CPU 1 is now offline [ 1790.871128] smpboot: CPU 2 is now offline [ 1790.895106] smpboot: CPU 3 is now offline [ 1790.897795] ACPI: Low-level resume complete [ 1790.897841] ACPI: EC: EC started [ 1790.897841] PM: Restoring platform NVS memory [ 1790.897989] LVT offset 0 assigned for vector 0x400 [ 1790.898253] Enabling non-boot CPUs ... [ 1790.898337] x86: Booting SMP configuration: [ 1790.898337] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 1790.900693] cache: parent cpu1 should not be sleeping [ 1790.900783] microcode: CPU1: patch_level=0x06006115 [ 1790.900937] CPU1 is up [ 1790.900992] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 1790.903514] cache: parent cpu2 should not be sleeping [ 1790.903618] microcode: CPU2: patch_level=0x06006115 [ 1790.904031] CPU2 is up [ 1790.904096] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 1790.906513] cache: parent cpu3 should not be sleeping [ 1790.906613] microcode: CPU3: patch_level=0x06006115 [ 1790.907036] CPU3 is up [ 1790.907710] ACPI: Waking up from system sleep state S3 [ 1790.934802] ACPI: EC: interrupt unblocked [ 1790.980632] ACPI: EC: event unblocked [ 1790.981666] sd 0:0:0:0: [sda] Starting disk [ 1790.981692] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [ 1791.014944] [drm] UVD initialized successfully. [ 1791.215283] [drm] VCE initialized successfully. [ 1791.216794] r8169 0000:01:00.0 enp1s0: link down [ 1791.233956] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [ 1791.702770] OOM killer enabled. [ 1791.702772] Restarting tasks ... done. [ 1791.711975] thermal thermal_zone2: failed to read out thermal zone (-61) [ 1791.723740] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 1791.723746] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 1791.797861] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1791.810665] ata2.00: configured for UDMA/133 [ 1791.881904] PM: suspend exit [ 1791.910338] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 1791.939790] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 1792.046716] Bluetooth: hci0: Intel firmware patch completed and activated [ 1793.781892] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1793.796861] ata1.00: configured for UDMA/133 [ 1793.896539] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1794.105890] r8169 0000:01:00.0 enp1s0: link down [ 1794.105994] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1794.108289] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1794.203371] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1794.275347] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1797.919729] wlo1: authenticate with c0:ff:d4:71:dd:c8 [ 1797.924886] wlo1: send auth to c0:ff:d4:71:dd:c8 (try 1/3) [ 1797.927978] wlo1: authenticated [ 1797.933585] wlo1: associate with c0:ff:d4:71:dd:c8 (try 1/3) [ 1797.936978] wlo1: RX AssocResp from c0:ff:d4:71:dd:c8 (capab=0x411 status=0 aid=8) [ 1797.938130] wlo1: associated [ 1797.946528] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 1797.992379] wlo1: Limiting TX power to 19 (22 - 3) dBm as advertised by c0:ff:d4:71:dd:c8 [ 1839.712225] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 1839.712241] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1839.721254] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 1839.721261] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 1839.946366] wlo1: deauthenticating from c0:ff:d4:71:dd:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 1843.866574] PM: suspend entry (deep) [ 1843.866578] PM: Syncing filesystems ... done. [ 1844.281873] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 1844.285718] OOM killer disabled. [ 1844.285720] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done. [ 1844.287860] Suspending console(s) (use no_console_suspend to debug) [ 1844.309785] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 1844.505388] sd 0:0:0:0: [sda] Stopping disk [ 1845.671950] ACPI: EC: interrupt blocked [ 1845.692622] snd_hda_intel 0000:00:09.2: Refused to change power state, currently in D0 [ 1845.708705] ACPI: Preparing to enter system sleep state S3 [ 1845.716849] ACPI: EC: event blocked [ 1845.716852] ACPI: EC: EC stopped [ 1845.716853] PM: Saving platform NVS memory [ 1845.716936] Disabling non-boot CPUs ... [ 1845.734457] smpboot: CPU 1 is now offline [ 1845.758567] smpboot: CPU 2 is now offline [ 1845.790474] smpboot: CPU 3 is now offline [ 1845.793425] ACPI: Low-level resume complete [ 1845.793481] ACPI: EC: EC started [ 1845.793482] PM: Restoring platform NVS memory [ 1845.793623] LVT offset 0 assigned for vector 0x400 [ 1845.793894] Enabling non-boot CPUs ... [ 1845.794007] x86: Booting SMP configuration: [ 1845.794008] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 1845.796363] cache: parent cpu1 should not be sleeping [ 1845.796451] microcode: CPU1: patch_level=0x06006115 [ 1845.796606] CPU1 is up [ 1845.796641] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 1845.799158] cache: parent cpu2 should not be sleeping [ 1845.799268] microcode: CPU2: patch_level=0x06006115 [ 1845.799662] CPU2 is up [ 1845.799736] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 1845.802149] cache: parent cpu3 should not be sleeping [ 1845.802250] microcode: CPU3: patch_level=0x06006115 [ 1845.802683] CPU3 is up [ 1845.803359] ACPI: Waking up from system sleep state S3 [ 1845.830646] ACPI: EC: interrupt unblocked [ 1845.876146] ACPI: EC: event unblocked [ 1845.876813] sd 0:0:0:0: [sda] Starting disk [ 1845.876927] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [ 1845.910305] [drm] UVD initialized successfully. [ 1846.109630] [drm] VCE initialized successfully. [ 1846.110752] r8169 0000:01:00.0 enp1s0: link down [ 1846.133366] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [ 1846.606555] OOM killer enabled. [ 1846.606556] Restarting tasks ... done. [ 1846.621981] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 1846.622195] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 1846.633312] thermal thermal_zone2: failed to read out thermal zone (-61) [ 1846.685277] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1846.697982] ata2.00: configured for UDMA/133 [ 1846.777335] PM: suspend exit [ 1846.814443] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 1846.843951] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 1846.951992] Bluetooth: hci0: Intel firmware patch completed and activated [ 1848.681188] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1848.694554] ata1.00: configured for UDMA/133 [ 1848.800242] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1848.997176] r8169 0000:01:00.0 enp1s0: link down [ 1848.997317] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 1849.004072] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1849.099851] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1849.175257] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 1852.776885] wlo1: authenticate with c0:ff:d4:71:dd:c8 [ 1852.781944] wlo1: send auth to c0:ff:d4:71:dd:c8 (try 1/3) [ 1852.784765] wlo1: authenticated [ 1852.789047] wlo1: associate with c0:ff:d4:71:dd:c8 (try 1/3) [ 1852.792848] wlo1: RX AssocResp from c0:ff:d4:71:dd:c8 (capab=0x411 status=0 aid=8) [ 1852.794003] wlo1: associated [ 1852.802437] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 1852.851579] wlo1: Limiting TX power to 19 (22 - 3) dBm as advertised by c0:ff:d4:71:dd:c8 [ 2024.661539] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 2024.661546] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 2024.670565] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 2024.670572] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 2025.006498] wlo1: deauthenticating from c0:ff:d4:71:dd:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2028.862614] PM: suspend entry (deep) [ 2028.862618] PM: Syncing filesystems ... done. [ 2029.315908] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 2029.319748] OOM killer disabled. [ 2029.319749] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2029.321548] Suspending console(s) (use no_console_suspend to debug) [ 2029.341229] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2029.517189] sd 0:0:0:0: [sda] Stopping disk [ 2030.687667] ACPI: EC: interrupt blocked [ 2030.705023] snd_hda_intel 0000:00:09.2: Refused to change power state, currently in D0 [ 2030.725064] ACPI: Preparing to enter system sleep state S3 [ 2030.733440] ACPI: EC: event blocked [ 2030.733442] ACPI: EC: EC stopped [ 2030.733443] PM: Saving platform NVS memory [ 2030.733522] Disabling non-boot CPUs ... [ 2030.751007] smpboot: CPU 1 is now offline [ 2030.782663] smpboot: CPU 2 is now offline [ 2030.806900] smpboot: CPU 3 is now offline [ 2030.809867] ACPI: Low-level resume complete [ 2030.809923] ACPI: EC: EC started [ 2030.809924] PM: Restoring platform NVS memory [ 2030.810063] LVT offset 0 assigned for vector 0x400 [ 2030.810327] Enabling non-boot CPUs ... [ 2030.810410] x86: Booting SMP configuration: [ 2030.810411] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 2030.812768] cache: parent cpu1 should not be sleeping [ 2030.812859] microcode: CPU1: patch_level=0x06006115 [ 2030.813014] CPU1 is up [ 2030.813085] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 2030.815607] cache: parent cpu2 should not be sleeping [ 2030.815714] microcode: CPU2: patch_level=0x06006115 [ 2030.816126] CPU2 is up [ 2030.816194] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 2030.818606] cache: parent cpu3 should not be sleeping [ 2030.818705] microcode: CPU3: patch_level=0x06006115 [ 2030.819133] CPU3 is up [ 2030.819807] ACPI: Waking up from system sleep state S3 [ 2030.847138] ACPI: EC: interrupt unblocked [ 2030.892489] ACPI: EC: event unblocked [ 2030.893244] sd 0:0:0:0: [sda] Starting disk [ 2030.893300] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [ 2030.926992] [drm] UVD initialized successfully. [ 2031.127147] [drm] VCE initialized successfully. [ 2031.128443] r8169 0000:01:00.0 enp1s0: link down [ 2031.149581] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [ 2031.618685] OOM killer enabled. [ 2031.618687] Restarting tasks ... done. [ 2031.630467] thermal thermal_zone2: failed to read out thermal zone (-61) [ 2031.638337] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 2031.638344] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 2031.701565] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2031.714176] ata2.00: configured for UDMA/133 [ 2031.789627] PM: suspend exit [ 2031.825909] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 2031.855333] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 2031.961390] Bluetooth: hci0: Intel firmware patch completed and activated [ 2033.689485] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2033.703078] ata1.00: configured for UDMA/133 [ 2033.796612] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 2034.005666] r8169 0000:01:00.0 enp1s0: link down [ 2034.005781] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 2034.008488] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 2034.112210] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 2034.180431] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 2037.737026] wlo1: authenticate with c0:ff:d4:71:dd:c8 [ 2037.742609] wlo1: send auth to c0:ff:d4:71:dd:c8 (try 1/3) [ 2037.745742] wlo1: authenticated [ 2037.753425] wlo1: associate with c0:ff:d4:71:dd:c8 (try 1/3) [ 2037.756691] wlo1: RX AssocResp from c0:ff:d4:71:dd:c8 (capab=0x411 status=0 aid=8) [ 2037.758187] wlo1: associated [ 2037.767636] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 2037.800093] wlo1: Limiting TX power to 19 (22 - 3) dBm as advertised by c0:ff:d4:71:dd:c8 [ 2176.668046] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 2176.668053] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 2176.677496] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 2176.677502] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 2176.996029] wlo1: deauthenticating from c0:ff:d4:71:dd:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2180.855280] PM: suspend entry (deep) [ 2180.855284] PM: Syncing filesystems ... done. [ 2181.216881] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 2181.220668] OOM killer disabled. [ 2181.220670] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2181.222639] Suspending console(s) (use no_console_suspend to debug) [ 2181.242218] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2181.415745] sd 0:0:0:0: [sda] Stopping disk [ 2182.597739] ACPI: EC: interrupt blocked [ 2182.638238] ACPI: Preparing to enter system sleep state S3 [ 2182.644424] ACPI: EC: event blocked [ 2182.644425] ACPI: EC: EC stopped [ 2182.644426] PM: Saving platform NVS memory [ 2182.644507] Disabling non-boot CPUs ... [ 2182.659817] smpboot: CPU 1 is now offline [ 2182.684074] smpboot: CPU 2 is now offline [ 2182.715984] smpboot: CPU 3 is now offline [ 2182.718650] ACPI: Low-level resume complete [ 2182.718735] ACPI: EC: EC started [ 2182.718735] PM: Restoring platform NVS memory [ 2182.718838] LVT offset 0 assigned for vector 0x400 [ 2182.719119] Enabling non-boot CPUs ... [ 2182.719231] x86: Booting SMP configuration: [ 2182.719232] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 2182.721587] cache: parent cpu1 should not be sleeping [ 2182.721675] microcode: CPU1: patch_level=0x06006115 [ 2182.721828] CPU1 is up [ 2182.721864] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 2182.724376] cache: parent cpu2 should not be sleeping [ 2182.724483] microcode: CPU2: patch_level=0x06006115 [ 2182.724879] CPU2 is up [ 2182.724950] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 2182.727360] cache: parent cpu3 should not be sleeping [ 2182.727461] microcode: CPU3: patch_level=0x06006115 [ 2182.727890] CPU3 is up [ 2182.728563] ACPI: Waking up from system sleep state S3 [ 2182.755641] ACPI: EC: interrupt unblocked [ 2182.801652] ACPI: EC: event unblocked [ 2182.802126] sd 0:0:0:0: [sda] Starting disk [ 2182.802439] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [ 2182.835242] [drm] UVD initialized successfully. [ 2183.034628] [drm] VCE initialized successfully. [ 2183.035866] r8169 0000:01:00.0 enp1s0: link down [ 2183.058819] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [ 2183.527883] OOM killer enabled. [ 2183.527884] Restarting tasks ... done. [ 2183.539354] thermal thermal_zone2: failed to read out thermal zone (-61) [ 2183.542339] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 2183.542557] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 2183.614653] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2183.627255] ata2.00: configured for UDMA/133 [ 2183.718812] PM: suspend exit [ 2183.755433] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 2183.785108] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 2183.865375] Bluetooth: hci0: Intel firmware patch completed and activated [ 2185.590650] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2185.603992] ata1.00: configured for UDMA/133 [ 2185.714082] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 2185.926726] r8169 0000:01:00.0 enp1s0: link down [ 2185.926832] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 2185.929792] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 2186.026844] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 2186.095033] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 2189.663801] wlo1: authenticate with c0:ff:d4:71:dd:c8 [ 2189.668952] wlo1: send auth to c0:ff:d4:71:dd:c8 (try 1/3) [ 2189.671767] wlo1: authenticated [ 2189.674676] wlo1: associate with c0:ff:d4:71:dd:c8 (try 1/3) [ 2189.677899] wlo1: RX AssocResp from c0:ff:d4:71:dd:c8 (capab=0x411 status=0 aid=10) [ 2189.679133] wlo1: associated [ 2189.687646] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 2189.731316] wlo1: Limiting TX power to 19 (22 - 3) dBm as advertised by c0:ff:d4:71:dd:c8 [ 2650.721802] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0). [ 2650.721810] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 2650.730596] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0). [ 2650.730603] atkbd serio0: Use 'setkeycodes e058 ' to make it known. [ 2651.028796] wlo1: deauthenticating from c0:ff:d4:71:dd:c8 by local choice (Reason: 3=DEAUTH_LEAVING) [ 2654.850562] PM: suspend entry (deep) [ 2654.850567] PM: Syncing filesystems ... done. [ 2655.434596] Freezing user space processes ... (elapsed 0.003 seconds) done. [ 2655.438288] OOM killer disabled. [ 2655.438290] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 2655.439960] Suspending console(s) (use no_console_suspend to debug) [ 2655.475693] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 2655.650138] sd 0:0:0:0: [sda] Stopping disk [ 2656.876504] ACPI: EC: interrupt blocked [ 2656.895433] snd_hda_intel 0000:00:09.2: Refused to change power state, currently in D0 [ 2656.915570] ACPI: Preparing to enter system sleep state S3 [ 2656.924362] ACPI: EC: event blocked [ 2656.924364] ACPI: EC: EC stopped [ 2656.924365] PM: Saving platform NVS memory [ 2656.924445] Disabling non-boot CPUs ... [ 2656.941174] smpboot: CPU 1 is now offline [ 2656.973407] smpboot: CPU 2 is now offline [ 2657.001335] smpboot: CPU 3 is now offline [ 2657.004253] ACPI: Low-level resume complete [ 2657.004297] ACPI: EC: EC started [ 2657.004297] PM: Restoring platform NVS memory [ 2657.004398] LVT offset 0 assigned for vector 0x400 [ 2657.004667] Enabling non-boot CPUs ... [ 2657.004747] x86: Booting SMP configuration: [ 2657.004748] smpboot: Booting Node 0 Processor 1 APIC 0x11 [ 2657.007082] cache: parent cpu1 should not be sleeping [ 2657.007172] microcode: CPU1: patch_level=0x06006115 [ 2657.007325] CPU1 is up [ 2657.007393] smpboot: Booting Node 0 Processor 2 APIC 0x12 [ 2657.009885] cache: parent cpu2 should not be sleeping [ 2657.009990] microcode: CPU2: patch_level=0x06006115 [ 2657.010397] CPU2 is up [ 2657.010467] smpboot: Booting Node 0 Processor 3 APIC 0x13 [ 2657.012852] cache: parent cpu3 should not be sleeping [ 2657.012952] microcode: CPU3: patch_level=0x06006115 [ 2657.013376] CPU3 is up [ 2657.014050] ACPI: Waking up from system sleep state S3 [ 2657.041335] ACPI: EC: interrupt unblocked [ 2657.087015] ACPI: EC: event unblocked [ 2657.087763] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000). [ 2657.088378] sd 0:0:0:0: [sda] Starting disk [ 2657.119542] [drm] UVD initialized successfully. [ 2657.319686] [drm] VCE initialized successfully. [ 2657.321002] r8169 0000:01:00.0 enp1s0: link down [ 2657.344237] usb 1-1.4: reset full-speed USB device number 3 using ehci-pci [ 2657.817112] OOM killer enabled. [ 2657.817113] Restarting tasks ... done. [ 2657.826439] thermal thermal_zone2: failed to read out thermal zone (-61) [ 2657.847428] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 2657.847434] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 2657.896026] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2657.908639] ata2.00: configured for UDMA/133 [ 2658.000098] PM: suspend exit [ 2658.021914] psmouse serio1: synaptics: queried max coordinates: x [..5652], y [..4846] [ 2658.051291] psmouse serio1: synaptics: queried min coordinates: x [1330..], y [1094..] [ 2658.180382] Bluetooth: hci0: Intel firmware patch completed and activated [ 2659.828075] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2659.841492] ata1.00: configured for UDMA/133 [ 2659.948745] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 2660.160196] r8169 0000:01:00.0 enp1s0: link down [ 2660.160336] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready [ 2660.163758] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 2660.268164] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 2660.338716] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready [ 2663.914260] wlo1: authenticate with c0:ff:d4:71:dd:c8 [ 2663.919417] wlo1: send auth to c0:ff:d4:71:dd:c8 (try 1/3) [ 2663.921846] wlo1: authenticated [ 2663.927904] wlo1: associate with c0:ff:d4:71:dd:c8 (try 1/3) [ 2663.931268] wlo1: RX AssocResp from c0:ff:d4:71:dd:c8 (capab=0x411 status=0 aid=10) [ 2663.932435] wlo1: associated [ 2663.941476] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 2663.965997] wlo1: Limiting TX power to 19 (22 - 3) dBm as advertised by c0:ff:d4:71:dd:c8