[ 5.434244] e1000e 0000:00:19.0: irq 61 for MSI/MSI-X [ 5.434360] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 5.436839] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 5.437279] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 5.449914] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 5.497922] init: plymouth-upstart-bridge main process ended, respawning [ 5.503142] init: plymouth-upstart-bridge main process (1343) terminated with status 1 [ 5.503172] init: plymouth-upstart-bridge main process ended, respawning [ 5.622509] Linux video capture interface: v2.00 [ 5.682612] usbcore: registered new interface driver btusb [ 5.697688] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 5.698884] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 5.714394] uvcvideo: Found UVC 1.00 device Integrated Camera (04ca:703c) [ 5.721754] input: Integrated Camera as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input14 [ 5.721821] usbcore: registered new interface driver uvcvideo [ 5.721823] USB Video Class driver (1.1.1) [ 5.780754] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 6.000946] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 7.248318] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 7.447215] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 [ 12.209762] wlan1: authenticate with e0:28:6d:88:b9:8e [ 12.214445] wlan1: send auth to e0:28:6d:88:b9:8e (try 1/3) [ 12.216640] wlan1: authenticated [ 12.218345] wlan1: associate with e0:28:6d:88:b9:8e (try 1/3) [ 12.238243] wlan1: RX AssocResp from e0:28:6d:88:b9:8e (capab=0x411 status=0 aid=1) [ 12.239213] wlan1: associated [ 12.239250] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 12.239285] cfg80211: Calling CRDA for country: AU [ 12.241551] cfg80211: Regulatory domain changed to country: AU [ 12.241554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.241556] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 12.241559] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 12.241561] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 12.241563] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 12.394795] wlan1: Limiting TX power to 20 (23 - 3) dBm as advertised by e0:28:6d:88:b9:8e [ 12.396872] wlan1: deauthenticating from e0:28:6d:88:b9:8e by local choice (reason=2) [ 12.399218] wlan1: authenticate with e0:28:6d:88:b9:8e [ 12.399225] wlan1: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded [ 12.404548] wlan1: send auth to e0:28:6d:88:b9:8e (try 1/3) [ 12.405114] cfg80211: Calling CRDA to update world regulatory domain [ 12.407694] cfg80211: World regulatory domain updated: [ 12.407699] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.407701] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.407704] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.407705] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.407707] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.407709] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.411742] wlan1: authenticated [ 12.414575] wlan1: associate with e0:28:6d:88:b9:8e (try 1/3) [ 12.434272] wlan1: RX AssocResp from e0:28:6d:88:b9:8e (capab=0x411 status=0 aid=1) [ 12.435140] wlan1: associated [ 12.435326] cfg80211: Calling CRDA for country: AU [ 12.437554] cfg80211: Regulatory domain changed to country: AU [ 12.437558] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.437560] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 12.437563] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 12.437565] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 12.437567] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 12.519781] wlan1: Limiting TX power to 20 (23 - 3) dBm as advertised by e0:28:6d:88:b9:8e [ 25.762202] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 25.766661] vboxdrv: Found 4 processor cores [ 25.785259] vboxdrv: TSC mode is Invariant, tentative frequency 2592698119 Hz [ 25.785262] vboxdrv: Successfully loaded version 5.2.12 (interface 0x00290001) [ 25.988492] VBoxNetFlt: Successfully started. [ 25.990726] VBoxNetAdp: Successfully started. [ 25.992285] VBoxPciLinuxInit [ 25.994034] vboxpci: IOMMU not found (not registered) [ 27.337514] init: plymouth-stop pre-start process (5767) terminated with status 1 [ 31.185763] wlan1: authenticate with e0:28:6d:88:b9:8d [ 31.186489] wlan1: send auth to e0:28:6d:88:b9:8d (try 1/3) [ 31.187039] cfg80211: Calling CRDA to update world regulatory domain [ 31.188956] cfg80211: World regulatory domain updated: [ 31.188958] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 31.188960] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.188961] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.188963] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 31.188964] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.188965] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 31.189626] wlan1: authenticated [ 31.189869] wlan1: associate with e0:28:6d:88:b9:8d (try 1/3) [ 31.200898] wlan1: RX AssocResp from e0:28:6d:88:b9:8d (capab=0x431 status=0 aid=4) [ 31.201808] wlan1: associated [ 31.201855] cfg80211: Calling CRDA for country: AU [ 31.203646] cfg80211: Regulatory domain changed to country: AU [ 31.203648] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 31.203650] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 31.203652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 31.203653] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 31.203654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 34.768598] audit_printk_skb: 69 callbacks suppressed [ 34.768601] type=1400 audit(1529578567.041:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5847 comm="apparmor_parser" [ 34.768605] type=1400 audit(1529578567.041:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5847 comm="apparmor_parser" [ 45.341664] VBoxPciLinuxLinuxUnload [ 66.141795] cfg80211: Calling CRDA to update world regulatory domain [ 66.143868] cfg80211: World regulatory domain updated: [ 66.143870] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 66.143872] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 66.143873] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 66.143874] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 66.143876] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 66.143877] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 66.327139] wlan1: authenticate with e0:28:6d:88:b9:8e [ 66.331978] wlan1: send auth to e0:28:6d:88:b9:8e (try 1/3) [ 66.340752] wlan1: authenticated [ 66.341792] wlan1: associate with e0:28:6d:88:b9:8e (try 1/3) [ 66.362073] wlan1: RX AssocResp from e0:28:6d:88:b9:8e (capab=0x411 status=0 aid=1) [ 66.362939] wlan1: associated [ 66.362991] cfg80211: Calling CRDA for country: AU [ 66.365268] cfg80211: Regulatory domain changed to country: AU [ 66.365272] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 66.365274] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 66.365276] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 66.365278] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 66.365279] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 66.415045] wlan1: Limiting TX power to 20 (23 - 3) dBm as advertised by e0:28:6d:88:b9:8e [ 68.769341] vboxdrv: Found 4 processor cores [ 68.786166] vboxdrv: TSC mode is Invariant, tentative frequency 2592673303 Hz [ 68.786169] vboxdrv: Successfully loaded version 5.2.8 (interface 0x00290001) [ 68.990121] VBoxNetFlt: Successfully started. [ 68.992412] VBoxNetAdp: Successfully started. [ 68.995207] VBoxPciLinuxInit [ 68.996505] vboxpci: IOMMU not found (not registered) [ 80.811849] SUPR0GipMap: fGetGipCpu=0xb [ 80.859704] vboxdrv: 0000000000000000 VMMR0.r0 [ 80.905378] vboxdrv: 0000000000000000 VBoxDDR0.r0 [ 595.887189] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 595.893271] JFS: nTxBlock = 8192, nTxLock = 65536 [ 595.900887] NTFS driver 2.1.30 [Flags: R/O MODULE]. [ 595.918449] QNX4 filesystem 0.2.3 registered. [ 595.926400] xor: automatically using best checksumming function: [ 595.965712] avx : 20690.000 MB/sec [ 596.033742] raid6: sse2x1 5455 MB/s [ 596.101757] raid6: sse2x2 3153 MB/s [ 596.169751] raid6: sse2x4 3944 MB/s [ 596.237771] raid6: avx2x1 4855 MB/s [ 596.305770] raid6: avx2x2 6411 MB/s [ 596.373766] raid6: avx2x4 6526 MB/s [ 596.373774] raid6: using algorithm avx2x4 (6526 MB/s) [ 596.373780] raid6: using avx2x2 recovery algorithm [ 596.386056] bio: create slab at 1 [ 596.386573] Btrfs loaded [ 824.480508] e1000e 0000:00:19.0: irq 61 for MSI/MSI-X [ 824.902208] wlan1: deauthenticating from e0:28:6d:88:b9:8e by local choice (reason=3) [ 824.906080] cfg80211: Calling CRDA to update world regulatory domain [ 824.909614] cfg80211: World regulatory domain updated: [ 824.909617] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 824.909619] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 824.909622] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 824.909624] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 824.909626] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 824.909628] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 825.598378] PM: Syncing filesystems ... done. [ 825.603873] PM: Preparing system for mem sleep [ 825.604158] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 825.605938] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 825.607125] PM: Entering mem sleep [ 825.607185] Suspending console(s) (use no_console_suspend to debug) [ 825.736819] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 825.736823] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 825.736868] sd 2:0:0:0: [sdb] Stopping disk [ 825.738280] sd 0:0:0:0: [sda] Stopping disk [ 826.053372] PM: suspend of devices complete after 445.804 msecs [ 826.069430] PM: late suspend of devices complete after 16.044 msecs [ 826.085551] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 826.133339] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 826.149609] PM: noirq suspend of devices complete after 80.128 msecs [ 826.149916] ACPI: Preparing to enter system sleep state S3 [ 826.151966] PM: Saving platform NVS memory [ 826.152893] Disabling non-boot CPUs ... [ 826.154076] kvm: disabling virtualization on CPU1 [ 826.154354] smpboot: CPU 1 is now offline [ 826.154712] Broke affinity for irq 66 [ 826.155718] kvm: disabling virtualization on CPU2 [ 826.257395] smpboot: CPU 2 is now offline [ 826.257765] Broke affinity for irq 23 [ 826.257768] Broke affinity for irq 58 [ 826.258777] kvm: disabling virtualization on CPU3 [ 826.361454] smpboot: CPU 3 is now offline [ 826.362857] ACPI: Low-level resume complete [ 826.362907] PM: Restoring platform NVS memory [ 826.363465] Enabling non-boot CPUs ... [ 826.363492] x86: Booting SMP configuration: [ 826.363493] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 826.375450] kvm: enabling virtualization on CPU1 [ 826.377753] CPU1 is up [ 826.377766] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 826.389716] kvm: enabling virtualization on CPU2 [ 826.392023] CPU2 is up [ 826.392038] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 826.403888] kvm: enabling virtualization on CPU3 [ 826.406219] CPU3 is up [ 826.409694] ACPI: Waking up from system sleep state S3 [ 826.485493] thinkpad_acpi: EC reports that Thermal Table has changed [ 826.487468] acpi LNXPOWER:02: Turning OFF [ 826.535376] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 826.599415] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 826.647736] PM: noirq resume of devices complete after 160.074 msecs [ 826.647879] PM: early resume of devices complete after 0.122 msecs [ 826.648075] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X [ 826.648083] e1000e 0000:00:19.0: irq 63 for MSI/MSI-X [ 826.651424] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X [ 826.651450] snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X [ 826.919814] usb 2-7: reset full-speed USB device number 2 using xhci_hcd [ 826.936512] usb 2-7: No LPM exit latency info found. Power management will be impacted. [ 826.936922] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411f91540 [ 826.936924] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411f91580 [ 826.936925] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880411f915c0 [ 826.936926] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804119f1500 [ 826.936927] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804119f1540 [ 826.967610] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 826.969739] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 826.969741] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 826.969743] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 826.969821] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 826.970891] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 826.970893] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 826.970895] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 826.970929] ata3.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 826.971074] ata3.00: configured for UDMA/133 [ 826.971563] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 826.971770] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 826.971772] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 826.971774] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 826.971808] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 826.972039] ata1.00: supports DRM functions and may not be fully accessible [ 826.972406] ata1.00: disabling queued TRIM support [ 826.972986] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 826.972988] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 826.972989] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 826.973022] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded [ 826.973209] ata1.00: supports DRM functions and may not be fully accessible [ 826.973313] ata1.00: disabling queued TRIM support [ 826.973635] ata1.00: configured for UDMA/133 [ 826.983584] sd 2:0:0:0: [sdb] Starting disk [ 826.987593] sd 0:0:0:0: [sda] Starting disk [ 827.103771] usb 2-8: reset high-speed USB device number 3 using xhci_hcd [ 827.126712] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88041195db00 [ 827.297687] PM: resume of devices complete after 649.407 msecs [ 827.298148] PM: Finishing wakeup. [ 827.298149] Restarting tasks ... done. [ 827.312508] Bluetooth: hci0: read Intel version: 370810011003110e00 [ 827.312512] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq [ 827.323833] video LNXVIDEO:00: Restoring backlight state [ 827.347832] Haswell HDMI audio: Power for pin 0x6 is now D0 [ 827.375397] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 827.402463] psmouse serio1: synaptics: queried max coordinates: x [..5712], y [..4780] [ 827.432148] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1074..] [ 827.535934] usb 2-3: new high-speed USB device number 4 using xhci_hcd [ 827.554536] usb 2-3: New USB device found, idVendor=17ef, idProduct=1012 [ 827.554542] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 827.554546] usb 2-3: Product: Lenovo ThinkPad Dock [ 827.554549] usb 2-3: Manufacturer: LENOVO [ 827.555147] hub 2-3:1.0: USB hub found [ 827.555485] hub 2-3:1.0: 4 ports detected [ 827.600933] e1000e 0000:00:19.0: irq 63 for MSI/MSI-X [ 827.704084] e1000e 0000:00:19.0: irq 63 for MSI/MSI-X [ 827.704275] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 827.707497] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 827.708138] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled [ 827.722173] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 827.816217] usb 3-3: new SuperSpeed USB device number 2 using xhci_hcd [ 828.068749] usb 3-3: New USB device found, idVendor=17ef, idProduct=1012 [ 828.068754] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 828.068757] usb 3-3: Product: Lenovo ThinkPad Dock [ 828.068760] usb 3-3: Manufacturer: LENOVO [ 828.071023] hub 3-3:1.0: USB hub found [ 828.071164] hub 3-3:1.0: 4 ports detected [ 828.156324] usb 2-3.1: new high-speed USB device number 5 using xhci_hcd [ 828.176817] usb 2-3.1: New USB device found, idVendor=2109, idProduct=2812 [ 828.176828] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 828.176835] usb 2-3.1: Product: USB2.0 Hub [ 828.176841] usb 2-3.1: Manufacturer: VIA Labs, Inc. [ 828.177742] hub 2-3.1:1.0: USB hub found [ 828.178646] hub 2-3.1:1.0: 4 ports detected [ 828.276365] usb 2-3.4: new high-speed USB device number 6 using xhci_hcd [ 828.292835] usb 2-3.4: New USB device found, idVendor=17ef, idProduct=1011 [ 828.292846] usb 2-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 828.292854] usb 2-3.4: Product: Lenovo ThinkPad Dock [ 828.292860] usb 2-3.4: Manufacturer: Lenovo [ 828.292866] usb 2-3.4: SerialNumber: Rev1.2 [ 828.293630] hub 2-3.4:1.0: USB hub found [ 828.293677] hub 2-3.4:1.0: 3 ports detected [ 828.444610] usb 3-3.1: new SuperSpeed USB device number 3 using xhci_hcd [ 828.698023] usb 3-3.1: New USB device found, idVendor=2109, idProduct=0812 [ 828.698034] usb 3-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 828.698042] usb 3-3.1: Product: USB3.0 Hub [ 828.698048] usb 3-3.1: Manufacturer: VIA Labs, Inc. [ 828.701343] hub 3-3.1:1.0: USB hub found [ 828.701578] hub 3-3.1:1.0: 4 ports detected [ 828.788693] usb 2-3.1.2: new full-speed USB device number 7 using xhci_hcd [ 828.807977] usb 2-3.1.2: New USB device found, idVendor=17ef, idProduct=6039 [ 828.807983] usb 2-3.1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 828.807986] usb 2-3.1.2: Product: Lenovo Laser Wireless Mouse [ 828.892712] usb 2-3.1.4: new full-speed USB device number 8 using xhci_hcd [ 828.910045] usb 2-3.1.4: New USB device found, idVendor=24f0, idProduct=0140 [ 828.910049] usb 2-3.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 828.910051] usb 2-3.1.4: Product: Das Keyboard [ 828.910053] usb 2-3.1.4: Manufacturer: Metadot - Das Keyboard [ 828.910180] usb 2-3.1.4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 829.430755] hidraw: raw HID events driver (C) Jiri Kosina [ 829.437974] usbcore: registered new interface driver usbhid [ 829.437977] usbhid: USB HID core driver [ 829.443340] input: Lenovo Laser Wireless Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.2/2-3.1.2:1.0/input/input15 [ 829.444046] hid-generic 0003:17EF:6039.0001: input,hidraw0: USB HID v1.11 Mouse [Lenovo Laser Wireless Mouse] on usb-0000:00:14.0-3.1.2/input0 [ 829.444142] input: Metadot - Das Keyboard Das Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.4/2-3.1.4:1.0/input/input16 [ 829.444215] hid-generic 0003:24F0:0140.0002: input,hidraw1: USB HID v1.10 Keyboard [Metadot - Das Keyboard Das Keyboard] on usb-0000:00:14.0-3.1.4/input0 [ 829.444837] input: Metadot - Das Keyboard Das Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3.1/2-3.1.4/2-3.1.4:1.1/input/input17 [ 829.446802] hid-generic 0003:24F0:0140.0003: input,hidraw2: USB HID v1.10 Device [Metadot - Das Keyboard Das Keyboard] on usb-0000:00:14.0-3.1.4/input1 [ 831.245698] wlan1: authenticate with e0:28:6d:88:b9:8e [ 831.250908] wlan1: send auth to e0:28:6d:88:b9:8e (try 1/3) [ 831.253114] wlan1: authenticated [ 831.254171] wlan1: associate with e0:28:6d:88:b9:8e (try 1/3) [ 831.274335] wlan1: RX AssocResp from e0:28:6d:88:b9:8e (capab=0x411 status=0 aid=1) [ 831.275331] wlan1: associated [ 831.275365] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 831.275417] cfg80211: Calling CRDA for country: AU [ 831.277322] cfg80211: Regulatory domain changed to country: AU [ 831.277325] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 831.277326] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 831.277328] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 831.277329] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 831.277330] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 831.351092] wlan1: Limiting TX power to 20 (23 - 3) dBm as advertised by e0:28:6d:88:b9:8e [ 851.751673] usb 2-7: USB disconnect, device number 2