BOOTED WITH 4.15.0-15: ************************** Petitboot (v1.7.1-p5699daa) 9006-12C 13038YA ------------------------------------------------------------------------------ Pegas 1.1 NV Text Pegas 1.1 Beta NV Pegas 1.1 Snapshot1 NV Pegas 1.1 NV [Disk: sdc2 / 3aca19f5-a6cd-478b-804a-e8102540cb15] Ubuntu, with Linux 4.15.0-12-generic (recovery mode) Ubuntu, with Linux 4.15.0-12-generic Ubuntu, with Linux 4.15.0-13-generic (recovery mode) Ubuntu, with Linux 4.15.0-13-generic Ubuntu, with Linux 4.15.10+ (recovery mode) Ubuntu, with Linux 4.15.10+ Ubuntu [Disk: sdj2 / bab108a0-d0a6-4609-87f1-6e33d0ad633c] Ubuntu, with Linux 4.15.0-13-generic (recovery mode) Ubuntu, with Linux 4.15.0-13-generic Ubuntu, with Linux 4.15.0-15-generic (recovery mode) * Ubuntu, with Linux 4.15.0-15-generic --> with this kernel Ubuntu [Disk: sdw2 / 3ab8e68d-a868-43d4-b8c7-07b79e583335] ------------------------------------------------------------------------------ Enter=accept, e=edit, n=new, x=exit, l=language, g=log, h=help The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes [ 74.469095] kexec_core: Starting new kernel [375607.080315720,5] OPAL: Switch to big-endian OS [375610.436440542,5] OPAL: Switch to little-endian OS [ 2.710492] integrity: Unable to open file: /etc/keys/x509_ima.der (-2) [ 2.710495] integrity: Unable to open file: /etc/keys/x509_evm.der (-2) [ 2.811488] vio vio: uevent: failed to send synthetic uevent /dev/sdt2: clean, 113884/18317312 files, 2867614/73240064 blocks [ 9.016168] pstore: decompression failed: -5 [ 9.899482] vio vio: uevent: failed to send synthetic uevent [ OK ] Started Show Plymouth Boot Screen. plymouth-start.service [ OK ] Started Forward Password Requests to Plymouth Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Paths. [ 12.737486] device-mapper: table: 253:27: multipath: error getting device [ 12.782666] device-mapper: table: 253:27: multipath: error getting device [ OK ] Started Device-Mapper Multipath Device Controller. multipathd.service [ OK ] Started LVM2 metadata daemon. lvm2-lvmetad.service Starting Availability of block devices... [ OK ] Started Availability of block devices. blk-availability.service [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. lvm2-monitor.service [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting AppArmor initialization... Starting Tell Plymouth To Write Out Runtime Data... Starting Set console font and keymap... Starting Enable support for additional executable binary formats... Starting Preprocess NFS configuration... Starting Create Volatile Files and Directories... [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Create Volatile Files and Directories. systemd-tmpfiles-setup.service Starting Update UTMP about System Boot/Shutdown... Starting Network Name Resolution... Starting RPC bind portmap service... [ OK ] Started Set console font and keymap. console-setup.service Mounting Arbitrary Executable File Formats File System... [ OK ] Started Preprocess NFS configuration. Starting NFSv4 ID-name mapping service... [ OK ] Reached target NFS client services. [ OK ] Started Update UTMP about System Boot/Shutdown. systemd-update-utmp.service [ OK ] Mounted Arbitrary Executable File Formats File System. proc-sys-fs-binfmt_misc.mount [ OK ] Started Enable support for additional executable binary formats. binfmt-support.service [ OK ] Started RPC bind portmap service. [ OK ] Reached target RPC Port Mapper. rpcbind.service [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. systemd-resolved.service [ OK ] Reached target Network. Starting NFS Mount Daemon... [ OK ] Started NFSv4 ID-name mapping service. nfs-idmapd.service [ OK ] Started NFS Mount Daemon. nfs-mountd.service Starting NFS server and services... [ OK ] Started NFS server and services. nfs-server.service [ OK ] Reached target Remote File Systems (Pre). [ OK ] Started Wait for Network to be Configured. systemd-networkd-wait-online.service [ OK ] Reached target Network is Online. Mounting /LTE... Mounting /distros... Mounting /images... Mounting /kte... Mounting /LOGS... Mounting /data... [ OK ] Started AppArmor initialization. apparmor.service [ OK ] Reached target System Initialization. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on UUID daemon activation socket. [ OK ] Reached target Sockets. [ OK ] Started Message of the Day. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started Discard unused blocks once a week. [ OK ] Reached target Basic System. Starting System Logging Service... [ OK ] Started D-Bus System Message Bus. dbus.service Starting OpenBSD Secure Shell server... [ OK ] Started Set the CPU Frequency Scaling governor. ondemand.service [ OK ] Started OPAL PRD daemon. opal-prd.service Starting Resets System Activity Data Collector... Starting Login Service... [ OK ] Started irqbalance daemon. irqbalance.service Starting IBM Power Raid dump daemon... Starting Internet superserver... Starting Accounts Service... Starting chrony, an NTP client/server... [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Started Regular background program processing daemon. cron.service [ OK ] Started System Logging Service. rsyslog.service [ OK ] Mounted /LTE. LTE.mount [ OK ] Mounted /kte. kte.mount [ OK ] Mounted /LOGS. LOGS.mount [ OK ] Mounted /data. data.mount Starting Hostname Service... [ OK ] Mounted /images. images.mount [ OK ] Mounted /distros. [ OK ] Reached target Remote File Systems. Starting Permit User Sessions... distros.mount [ OK ] Started Resets System Activity Data Collector. [ OK ] Started Login Service. [ OK ] Started IBM Power Raid dump daemon. Starting IBM Power Raid init daemon... Starting IBM Power Raid update daemon... sysstat.service systemd-logind.service iprdump.service [ OK ] Started IBM Power Raid init daemon. iprinit.service [ OK ] Started IBM Power Raid update daemon. iprupdate.service [ OK ] Reached target IBM Power Raid utilities. [ OK ] Started Permit User Sessions. systemd-user-sessions.service Starting Terminate Plymouth Boot Screen... Starting Hold until boot process finishes up... Ubuntu Bionic Beaver (development branch) boslcp3 hvc0 boslcp3 login: root Password: Last login: Tue Apr 10 07:03:15 CDT 2018 from 10.33.11.31 on pts/0 Welcome to Ubuntu Bionic Beaver (development branch) (GNU/Linux 4.15.0-15-generic ppc64le) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage ******************************************************************************** IBM Business Use Statement -------------------------- IBM's internal systems must only be used for conducting IBM's business or for purposes authorized by IBM management. Use is subject to audit at any time by IBM management. Distribution: Ubuntu Bionic Beaver Kernel Build: 4.15.0-15-generic System Name : boslcp3 Model/Type : machine : PowerNV 9006-12C Platform : powerpc64le ******************************************************************************** root@boslcp3:~# [ 66.295233] Unable to handle kernel paging request for data at address 0x8882f6ed90e9151a [ 66.295297] Faulting instruction address: 0xc00000000038a110 cpu 0x50: Vector: 380 (Data Access Out of Range) at [c00000000692f650] pc: c00000000038a110: kmem_cache_alloc_node+0x2f0/0x350 lr: c00000000038a0fc: kmem_cache_alloc_node+0x2dc/0x350 sp: c00000000692f8d0 msr: 9000000000009033 dar: 8882f6ed90e9151a current = 0xc00000000698fd00 paca = 0xc00000000fab7000 softe: 0 irq_happened: 0x01 pid = 1762, comm = systemd-journal Linux version 4.15.0-15-generic (buildd@bos02-ppc64el-002) (gcc version 7.3.0 (Ubuntu 7.3.0-14ubuntu1)) #16-Ubuntu SMP Wed Apr 4 13:57:51 UTC 2018 (Ubuntu 4.15.0-15.16-generic 4.15.15) enter ? for help [c00000000692f8d0] c000000000389fd4 kmem_cache_alloc_node+0x1b4/0x350 (unreliable) [c00000000692f940] c000000000b2ec6c __alloc_skb+0x6c/0x220 [c00000000692f9a0] c000000000b30b6c alloc_skb_with_frags+0x7c/0x2e0 [c00000000692fa30] c000000000b247cc sock_alloc_send_pskb+0x29c/0x2c0 [c00000000692fae0] c000000000c5705c unix_dgram_sendmsg+0x15c/0x8f0 [c00000000692fbc0] c000000000b1ec64 sock_sendmsg+0x64/0x90 [c00000000692fbf0] c000000000b20abc ___sys_sendmsg+0x31c/0x390 [c00000000692fd90] c000000000b221ec __sys_sendmsg+0x5c/0xc0 [c00000000692fe30] c00000000000b184 system_call+0x58/0x6c --- Exception: c00 (System Call) at 000074826f6fa9c4 SP (7ffff5dc5510) is in userspace 50:mon> 50:mon> Unrecognized command: \x3\x3 (type ? for help) 50:mon> t [c00000000692f8d0] c000000000389fd4 kmem_cache_alloc_node+0x1b4/0x350 (unreliable) [c00000000692f940] c000000000b2ec6c __alloc_skb+0x6c/0x220 [c00000000692f9a0] c000000000b30b6c alloc_skb_with_frags+0x7c/0x2e0 [c00000000692fa30] c000000000b247cc sock_alloc_send_pskb+0x29c/0x2c0 [c00000000692fae0] c000000000c5705c unix_dgram_sendmsg+0x15c/0x8f0 [c00000000692fbc0] c000000000b1ec64 sock_sendmsg+0x64/0x90 [c00000000692fbf0] c000000000b20abc ___sys_sendmsg+0x31c/0x390 [c00000000692fd90] c000000000b221ec __sys_sendmsg+0x5c/0xc0 [c00000000692fe30] c00000000000b184 system_call+0x58/0x6c --- Exception: c00 (System Call) at 000074826f6fa9c4 SP (7ffff5dc5510) is in userspace 50:mon> r R00 = c000000000389fd4 R16 = 00007ffff5dc5988 R01 = c00000000692f8d0 R17 = 00007ffff5dc5990 R02 = c0000000016eb400 R18 = 00000f898d5fee08 R03 = 0000000000000001 R19 = 0000000000000003 R04 = 0048ca1cff378073 R20 = 0000000000000000 R05 = 00000000000003e2 R21 = 0000000000000000 R06 = 0000000000000001 R22 = 000000000000004b R07 = 00000000000003e1 R23 = 4882d6e3c8b7ab1b R08 = 48ca1cff37802b68 R24 = c000200e585ebe01 R09 = 0000000000000000 R25 = 8882f6ed90e9151a R10 = 0000000000000000 R26 = c000000000b2ec6c R11 = c000000ff80c4008 R27 = c000000ff901ee00 R12 = 0000000000002000 R28 = ffffffffffffffff R13 = c00000000fab7000 R29 = 00000000015004c0 R14 = 00000f899aa9d6a3 R30 = c000200e585ebe01 R15 = 00000f898d600ae8 R31 = c000000ff901ee00 pc = c00000000038a110 kmem_cache_alloc_node+0x2f0/0x350 cfar= c000000000016e1c arch_local_irq_restore+0x1c/0x90 lr = c00000000038a0fc kmem_cache_alloc_node+0x2dc/0x350 msr = 9000000000009033 cr = 28002804 ctr = 0000000000000001 xer = 0000000000000000 trap = 380 dar = 8882f6ed90e9151a dsisr = c000000003e204a0 50:mon> e cpu 0x50: Vector: 380 (Data Access Out of Range) at [c00000000692f650] pc: c00000000038a110: kmem_cache_alloc_node+0x2f0/0x350 lr: c00000000038a0fc: kmem_cache_alloc_node+0x2dc/0x350 sp: c00000000692f8d0 msr: 9000000000009033 dar: 8882f6ed90e9151a current = 0xc00000000698fd00 paca = 0xc00000000fab7000 softe: 0 irq_happened: 0x01 pid = 1762, comm = systemd-journal Linux version 4.15.0-15-generic (buildd@bos02-ppc64el-002) (gcc version 7.3.0 (Ubuntu 7.3.0-14ubuntu1)) #16-Ubuntu SMP Wed Apr 4 13:57:51 UTC 2018 (Ubuntu 4.15.0-15.16-generic 4.15.15) 50:mon> dl [ 0.000000] opal: OPAL detected ! [ 0.000000] Allocated 5767168 bytes for 2048 pacas at (ptrval) [ 0.000000] dt-cpu-ftrs: setup for ISA 3000 [ 0.000000] dt-cpu-ftrs: not enabling: system-call-vectored (disabled or unsupported by kernel) [ 0.000000] dt-cpu-ftrs: final cpu/mmu features = 0x000070eb8f5fb1a7 0x3c006041 [ 0.000000] radix-mmu: Page sizes from device-tree: [ 0.000000] radix-mmu: Page size shift = 12 AP=0x0 [ 0.000000] radix-mmu: Page size shift = 16 AP=0x5 [ 0.000000] radix-mmu: Page size shift = 21 AP=0x1 [ 0.000000] radix-mmu: Page size shift = 30 AP=0x2 [ 0.000000] radix-mmu: Initializing Radix MMU [ 0.000000] radix-mmu: Partition table (ptrval) [ 0.000000] radix-mmu: Mapped 0x0000000000000000-0x0000001000000000 with 1.00 GiB pages [ 0.000000] radix-mmu: Mapped 0x0000200000000000-0x0000201000000000 with 1.00 GiB pages [ 0.000000] radix-mmu: Process table (ptrval) and radix root for kernel: (ptrval) [ 0.000000] Found initrd at 0xc000000003c10000:0xc0000000070724e2 [ 0.000000] OPAL: Found memory mapped LPC bus on chip 0 [ 0.000000] ISA: Non-PCI bridge is /lpcm-opb@6030000000000/lpc@0 [ 0.000000] Using PowerNV machine description [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 4 threads per core [ 0.000000] (thread shift is 2) [ 0.000000] Freed 5308416 bytes for unused pacas [ 0.000000] ----------------------------------------------------- [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] phys_mem_size = 0x2000000000 [ 0.000000] dcache_bsize = 0x80 [ 0.000000] icache_bsize = 0x80 [ 0.000000] cpu_features = 0x000070eb8f5fb1a7 [ 0.000000] possible = 0x00007ffbfffff1af [ 0.000000] always = 0x00000000000001a0 [ 0.000000] cpu_user_features = 0xdc0065c2 0xaec00000 [ 0.000000] mmu_features = 0x3c006041 [ 0.000000] firmware_features = 0x0000000110000000 [ 0.000000] ----------------------------------------------------- [ 0.000000] cma: Reserved 6560 MiB at 0x0000200e62000000 [ 0.000000] numa: NODE_DATA [mem 0xfffff3c80-0xfffffffff] [ 0.000000] numa: NODE_DATA [mem 0x200fff1c1c80-0x200fff1cdfff] [ 0.000000] rfi-flush: Using mttrig type flush [ 0.000000] rfi-flush: patched 9 locations [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0000000) [ 0.000000] PCI host bridge /pciex@600c3c0000000 (primary) ranges: [ 0.000000] MEM 0x000600c000000000..0x000600c07ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006000000000000..0x0006003fffffffff -> 0x0006000000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfe000) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0100000) [ 0.000000] PCI host bridge /pciex@600c3c0100000 ranges: [ 0.000000] MEM 0x000600c080000000..0x000600c0fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006004000000000..0x0006007fffffffff -> 0x0006004000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd800) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0200000) [ 0.000000] PCI host bridge /pciex@600c3c0200000 ranges: [ 0.000000] MEM 0x000600c100000000..0x000600c17ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006008000000000..0x000600bfffffffff -> 0x0006008000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfd000) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0300000) [ 0.000000] PCI host bridge /pciex@600c3c0300000 ranges: [ 0.000000] MEM 0x000600c180000000..0x000600c1fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006020000000000..0x0006023fffffffff -> 0x0006020000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0xfc000) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0400000) [ 0.000000] PCI host bridge /pciex@600c3c0400000 ranges: [ 0.000000] MEM 0x000600c200000000..0x000600c27ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006024000000000..0x0006027fffffffff -> 0x0006024000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb800) [ 0.000000] Initializing IODA2 PHB (/pciex@600c3c0500000) [ 0.000000] PCI host bridge /pciex@600c3c0500000 ranges: [ 0.000000] MEM 0x000600c280000000..0x000600c2fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006028000000000..0x000602bfffffffff -> 0x0006028000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0xfb000) [ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0000000) [ 0.000000] PCI host bridge /pciex@620c3c0000000 ranges: [ 0.000000] MEM 0x000620c000000000..0x000620c07ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006200000000000..0x0006203fffffffff -> 0x0006200000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0x1fe000) [ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0100000) [ 0.000000] PCI host bridge /pciex@620c3c0100000 ranges: [ 0.000000] MEM 0x000620c080000000..0x000620c0fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006204000000000..0x0006207fffffffff -> 0x0006204000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1fd800) [ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0200000) [ 0.000000] PCI host bridge /pciex@620c3c0200000 ranges: [ 0.000000] MEM 0x000620c100000000..0x000620c17ffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006208000000000..0x000620bfffffffff -> 0x0006208000000000 (M64 #1..15) [ 0.000000] Using M64 #15 as default window [ 0.000000] 256 (255) PE's M32: 0x80000000 [segment=0x800000] [ 0.000000] M64: 0x4000000000 [segment=0x40000000] [ 0.000000] Allocated bitmap for 2040 MSIs (base IRQ 0x1fd000) [ 0.000000] Initializing IODA2 PHB (/pciex@620c3c0300000) [ 0.000000] PCI host bridge /pciex@620c3c0300000 ranges: [ 0.000000] MEM 0x000620c180000000..0x000620c1fffeffff -> 0x0000000080000000 [ 0.000000] MEM 0x0006220000000000..0x0006223fffffffff -> 0x0006220000000000 (M64 #1..31) [ 0.000000] Using M64 #31 as default window [ 0.000000] 512 (511) PE's M32: 0x80000000 [segment=0x400000] [ 0.000000] M64: 0x4000000000 [segment=0x20000000] [ 0.000000] Allocated bitmap for 4088 MSIs (base IRQ 0x1fc000) [ 0.000000] OPAL nvram setup, 589824 bytes [ 0.000000] Top of RAM: 0x201000000000, Total RAM: 0x2000000000 [ 0.000000] Memory hole size: 33488896MB [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000200fffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000fffffffff] [ 0.000000] node 8: [mem 0x0000200000000000-0x0000200fffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000fffffffff] [ 0.000000] On node 0 totalpages: 1048576 [ 0.000000] DMA zone: 1024 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 1048576 pages, LIFO batch:1 [ 0.000000] Initmem setup node 8 [mem 0x0000200000000000-0x0000200fffffffff] [ 0.000000] On node 8 totalpages: 1048576 [ 0.000000] DMA zone: 1024 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 1048576 pages, LIFO batch:1 [ 0.000000] random: fast init done [ 0.000000] percpu: Embedded 4 pages/cpu @ (ptrval) s171032 r0 d91112 u262144 [ 0.000000] pcpu-alloc: s171032 r0 d91112 u262144 alloc=4*65536 [ 0.000000] pcpu-alloc: [0] 000 [0] 001 [0] 002 [0] 003 [ 0.000000] pcpu-alloc: [0] 004 [0] 005 [0] 006 [0] 007 [ 0.000000] pcpu-alloc: [0] 008 [0] 009 [0] 010 [0] 011 [ 0.000000] pcpu-alloc: [0] 012 [0] 013 [0] 014 [0] 015 [ 0.000000] pcpu-alloc: [0] 016 [0] 017 [0] 018 [0] 019 [ 0.000000] pcpu-alloc: [0] 020 [0] 021 [0] 022 [0] 023 [ 0.000000] pcpu-alloc: [0] 024 [0] 025 [0] 026 [0] 027 [ 0.000000] pcpu-alloc: [0] 028 [0] 029 [0] 030 [0] 031 [ 0.000000] pcpu-alloc: [0] 032 [0] 033 [0] 034 [0] 035 [ 0.000000] pcpu-alloc: [0] 036 [0] 037 [0] 038 [0] 039 [ 0.000000] pcpu-alloc: [0] 040 [0] 041 [0] 042 [0] 043 [ 0.000000] pcpu-alloc: [0] 044 [0] 045 [0] 046 [0] 047 [ 0.000000] pcpu-alloc: [0] 048 [0] 049 [0] 050 [0] 051 [ 0.000000] pcpu-alloc: [0] 052 [0] 053 [0] 054 [0] 055 [ 0.000000] pcpu-alloc: [0] 056 [0] 057 [0] 058 [0] 059 [ 0.000000] pcpu-alloc: [0] 060 [0] 061 [0] 062 [0] 063 [ 0.000000] pcpu-alloc: [0] 064 [0] 065 [0] 066 [0] 067 [ 0.000000] pcpu-alloc: [0] 068 [0] 069 [0] 070 [0] 071 [ 0.000000] pcpu-alloc: [0] 072 [0] 073 [0] 074 [0] 075 [ 0.000000] pcpu-alloc: [0] 076 [0] 077 [0] 078 [0] 079 [ 0.000000] pcpu-alloc: [1] 080 [1] 081 [1] 082 [1] 083 [ 0.000000] pcpu-alloc: [1] 084 [1] 085 [1] 086 [1] 087 [ 0.000000] pcpu-alloc: [1] 088 [1] 089 [1] 090 [1] 091 [ 0.000000] pcpu-alloc: [1] 092 [1] 093 [1] 094 [1] 095 [ 0.000000] pcpu-alloc: [1] 096 [1] 097 [1] 098 [1] 099 [ 0.000000] pcpu-alloc: [1] 100 [1] 101 [1] 102 [1] 103 [ 0.000000] pcpu-alloc: [1] 104 [1] 105 [1] 106 [1] 107 [ 0.000000] pcpu-alloc: [1] 108 [1] 109 [1] 110 [1] 111 [ 0.000000] pcpu-alloc: [1] 112 [1] 113 [1] 114 [1] 115 [ 0.000000] pcpu-alloc: [1] 116 [1] 117 [1] 118 [1] 119 [ 0.000000] pcpu-alloc: [1] 120 [1] 121 [1] 122 [1] 123 [ 0.000000] pcpu-alloc: [1] 124 [1] 125 [1] 126 [1] 127 [ 0.000000] pcpu-alloc: [1] 128 [1] 129 [1] 130 [1] 131 [ 0.000000] pcpu-alloc: [1] 132 [1] 133 [1] 134 [1] 135 [ 0.000000] pcpu-alloc: [1] 136 [1] 137 [1] 138 [1] 139 [ 0.000000] pcpu-alloc: [1] 140 [1] 141 [1] 142 [1] 143 [ 0.000000] pcpu-alloc: [1] 144 [1] 145 [1] 146 [1] 147 [ 0.000000] pcpu-alloc: [1] 148 [1] 149 [1] 150 [1] 151 [ 0.000000] pcpu-alloc: [1] 152 [1] 153 [1] 154 [1] 155 [ 0.000000] pcpu-alloc: [1] 156 [1] 157 [1] 158 [1] 159 [ 0.000000] Built 2 zonelists, mobility grouping on. Total pages: 2095104 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=bab108a0-d0a6-4609-87f1-6e33d0ad633c ro xmon=on splash quiet [ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes [ 0.000000] log_buf_len total cpu_extra contributions: 651264 bytes [ 0.000000] log_buf_len min size: 131072 bytes [ 0.000000] log_buf_len: 1048576 bytes [ 0.000000] early log buf free: 118644(90%) [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=160, Nodes=9 [ 0.000000] ftrace: allocating 35029 entries in 13 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=160. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=160 [ 0.000000] NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16 [ 0.000000] xive: Interrupt handling initialized with native backend [ 0.000000] xive: Using priority 7 for all interrupts [ 0.000000] xive: Using 64kB queues [ 0.000000] time_init: decrementer frequency = 512.000000 MHz [ 0.000000] time_init: processor frequency = 2134.000000 MHz [ 0.000003] time_init: 56 bit decrementer (max: 7fffffffffffff) [ 0.000007] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns [ 0.000009] clocksource: timebase mult[1f40000] shift[24] registered [ 0.000012] clockevent: decrementer mult[83126e98] shift[32] cpu[0] [ 0.000289] Console: colour dummy device 80x25 [ 0.000603] console [hvc0] enabled [ 0.000605] bootconsole [udbg0] disabled [ 0.000946] pid_max: default: 163840 minimum: 1280 [ 0.003159] Security Framework initialized [ 0.003162] Yama: becoming mindful. [ 0.003250] AppArmor: AppArmor initialized [ 0.008993] Dentry cache hash table entries: 8388608 (order: 10, 67108864 bytes) [ 0.011826] Inode-cache hash table entries: 4194304 (order: 9, 33554432 bytes) [ 0.012156] Mount-cache hash table entries: 131072 (order: 4, 1048576 bytes) [ 0.012243] Mountpoint-cache hash table entries: 131072 (order: 4, 1048576 bytes) [ 0.014327] EEH: PowerNV platform initialized [ 0.014332] POWER9 performance monitor hardware support registered [ 0.014404] Hierarchical SRCU implementation. [ 0.017209] smp: Bringing up secondary CPUs ... [ 0.753870] smp: Brought up 2 nodes, 160 CPUs [ 0.753874] numa: Node 0 CPUs: 0-79 [ 0.753881] numa: Node 8 CPUs: 80-159 [ 0.753887] Using shared cache scheduler topology [ 0.776061] devtmpfs: initialized [ 0.816424] evm: security.selinux [ 0.816425] evm: security.SMACK64 [ 0.816427] evm: security.SMACK64EXEC [ 0.816428] evm: security.SMACK64TRANSMUTE [ 0.816429] evm: security.SMACK64MMAP [ 0.816430] evm: security.apparmor [ 0.816431] evm: security.ima [ 0.816433] evm: security.capability [ 0.817634] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.817721] futex hash table entries: 65536 (order: 7, 8388608 bytes) [ 0.823434] pinctrl core: initialized pinctrl subsystem [ 0.824129] NET: Registered protocol family 16 [ 0.824243] EEH: No capable adapters found [ 0.824500] audit: initializing netlink subsys (disabled) [ 0.824632] audit: type=2000 audit(1523362064.820:1): state=initialized audit_enabled=0 res=1 [ 0.825127] cpuidle: using governor ladder [ 0.825328] cpuidle: using governor menu [ 0.825632] pstore: using zlib compression [ 0.825638] pstore: Registered nvram as persistent store backend [ 0.906310] PCI: Probing PCI hardware [ 0.906396] PCI host bridge to bus 0000:00 [ 0.906403] pci_bus 0000:00: root bus resource [mem 0x600c000000000-0x600c07ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.906407] pci_bus 0000:00: root bus resource [mem 0x6000000000000-0x6003fbfffffff 64bit pref] [ 0.906412] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.906417] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.906460] pci 0000:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.906548] pci 0000:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.906556] pci 0000:00:00.0: disabling bridge mem windows [ 0.906654] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.906868] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.906878] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.906910] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff [ 0.906972] PCI host bridge to bus 0001:00 [ 0.906977] pci_bus 0001:00: root bus resource [mem 0x600c080000000-0x600c0fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.906981] pci_bus 0001:00: root bus resource [mem 0x6004000000000-0x6007f7fffffff 64bit pref] [ 0.906984] pci_bus 0001:00: root bus resource [bus 00-ff] [ 0.906988] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff [ 0.907019] pci 0001:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.907098] pci 0001:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.907106] pci 0001:00:00.0: disabling bridge mem windows [ 0.907202] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold [ 0.907407] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 0.907415] pci 0001:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.907446] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff [ 0.907505] PCI host bridge to bus 0002:00 [ 0.907510] pci_bus 0002:00: root bus resource [mem 0x600c100000000-0x600c17ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.907514] pci_bus 0002:00: root bus resource [mem 0x6008000000000-0x600bf7fffffff 64bit pref] [ 0.907518] pci_bus 0002:00: root bus resource [bus 00-ff] [ 0.907522] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff [ 0.907552] pci 0002:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.907644] pci 0002:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.907651] pci 0002:00:00.0: disabling bridge mem windows [ 0.907746] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold [ 0.907997] pci 0002:01:00.0: [8086:1589] type 00 class 0x020000 [ 0.908072] pci 0002:01:00.0: reg 0x10: [mem 0x6008000000000-0x60080007fffff 64bit pref] [ 0.908119] pci 0002:01:00.0: reg 0x1c: [mem 0x6008002000000-0x6008002007fff 64bit pref] [ 0.908157] pci 0002:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.908183] pci 0002:01:00.0: Disabling memory decoding and releasing memory resources. [ 0.908192] pci 0002:01:00.0: BAR3 [mem size 0x00008000 64bit pref]: requesting alignment to 0x10000 [ 0.908352] pci 0002:01:00.0: PME# supported from D0 D3hot [ 0.908444] pci 0002:01:00.0: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.908448] pci 0002:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 0.908487] pci 0002:01:00.0: reg 0x190: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.908491] pci 0002:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR3 for 32 VFs) [ 0.908780] pci 0002:01:00.0: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.908784] pci 0002:01:00.0: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.908909] pci 0002:01:00.1: [8086:1589] type 00 class 0x020000 [ 0.908982] pci 0002:01:00.1: reg 0x10: [mem 0x6008000800000-0x6008000ffffff 64bit pref] [ 0.909030] pci 0002:01:00.1: reg 0x1c: [mem 0x6008002010000-0x6008002017fff 64bit pref] [ 0.909069] pci 0002:01:00.1: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.909094] pci 0002:01:00.1: Disabling memory decoding and releasing memory resources. [ 0.909103] pci 0002:01:00.1: BAR3 [mem size 0x00008000 64bit pref]: requesting alignment to 0x10000 [ 0.909256] pci 0002:01:00.1: PME# supported from D0 D3hot [ 0.909332] pci 0002:01:00.1: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.909336] pci 0002:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 0.909384] pci 0002:01:00.1: reg 0x190: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.909388] pci 0002:01:00.1: VF(n) BAR3 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR3 for 32 VFs) [ 0.909679] pci 0002:01:00.1: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.909683] pci 0002:01:00.1: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.909809] pci 0002:01:00.2: [8086:1589] type 00 class 0x020000 [ 0.909883] pci 0002:01:00.2: reg 0x10: [mem 0x6008001000000-0x60080017fffff 64bit pref] [ 0.909932] pci 0002:01:00.2: reg 0x1c: [mem 0x6008002020000-0x6008002027fff 64bit pref] [ 0.909971] pci 0002:01:00.2: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.909996] pci 0002:01:00.2: Disabling memory decoding and releasing memory resources. [ 0.910006] pci 0002:01:00.2: BAR3 [mem size 0x00008000 64bit pref]: requesting alignment to 0x10000 [ 0.910162] pci 0002:01:00.2: PME# supported from D0 D3hot [ 0.910239] pci 0002:01:00.2: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.910243] pci 0002:01:00.2: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 0.910284] pci 0002:01:00.2: reg 0x190: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.910288] pci 0002:01:00.2: VF(n) BAR3 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR3 for 32 VFs) [ 0.910583] pci 0002:01:00.2: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.910587] pci 0002:01:00.2: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.910713] pci 0002:01:00.3: [8086:1589] type 00 class 0x020000 [ 0.910789] pci 0002:01:00.3: reg 0x10: [mem 0x6008001800000-0x6008001ffffff 64bit pref] [ 0.910840] pci 0002:01:00.3: reg 0x1c: [mem 0x6008002030000-0x6008002037fff 64bit pref] [ 0.910879] pci 0002:01:00.3: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.910905] pci 0002:01:00.3: Disabling memory decoding and releasing memory resources. [ 0.910914] pci 0002:01:00.3: BAR3 [mem size 0x00008000 64bit pref]: requesting alignment to 0x10000 [ 0.911072] pci 0002:01:00.3: PME# supported from D0 D3hot [ 0.911151] pci 0002:01:00.3: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.911155] pci 0002:01:00.3: VF(n) BAR0 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR0 for 32 VFs) [ 0.911195] pci 0002:01:00.3: reg 0x190: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.911199] pci 0002:01:00.3: VF(n) BAR3 space: [mem 0x00000000-0x001fffff 64bit pref] (contains BAR3 for 32 VFs) [ 0.911499] pci 0002:01:00.3: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.911502] pci 0002:01:00.3: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.911603] pci 0002:00:00.0: PCI bridge to [bus 01] [ 0.911611] pci 0002:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.911920] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.911985] PCI host bridge to bus 0003:00 [ 0.911990] pci_bus 0003:00: root bus resource [mem 0x600c180000000-0x600c1fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.911994] pci_bus 0003:00: root bus resource [mem 0x6020000000000-0x6023fbfffffff 64bit pref] [ 0.911998] pci_bus 0003:00: root bus resource [bus 00-ff] [ 0.912002] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to ff [ 0.912032] pci 0003:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.912124] pci 0003:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.912132] pci 0003:00:00.0: disabling bridge mem windows [ 0.912226] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold [ 0.912464] pci 0003:01:00.0: [9005:028d] type 00 class 0x010700 [ 0.912522] pci 0003:01:00.0: reg 0x10: [mem 0x600c180000000-0x600c1800fffff 64bit] [ 0.912552] pci 0003:01:00.0: reg 0x18: [mem 0x600c180180000-0x600c1801803ff 64bit] [ 0.912572] pci 0003:01:00.0: reg 0x20: [io 0x0000-0x00ff] [ 0.912609] pci 0003:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.912633] pci 0003:01:00.0: Disabling memory decoding and releasing memory resources. [ 0.912642] pci 0003:01:00.0: BAR2 [mem size 0x00000400 64bit]: requesting alignment to 0x10000 [ 0.912750] pci 0003:01:00.0: PME# supported from D0 D1 D3hot [ 0.912864] pci 0003:00:00.0: PCI bridge to [bus 01] [ 0.912872] pci 0003:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.912962] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.913024] PCI host bridge to bus 0004:00 [ 0.913029] pci_bus 0004:00: root bus resource [mem 0x600c200000000-0x600c27ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.913033] pci_bus 0004:00: root bus resource [mem 0x6024000000000-0x6027f7fffffff 64bit pref] [ 0.913036] pci_bus 0004:00: root bus resource [bus 00-ff] [ 0.913040] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to ff [ 0.913070] pci 0004:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.913163] pci 0004:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.913170] pci 0004:00:00.0: disabling bridge mem windows [ 0.913265] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold [ 0.913508] pci 0004:01:00.0: [1a03:1150] type 01 class 0x060400 [ 0.913632] pci 0004:01:00.0: Disabling memory decoding and releasing memory resources. [ 0.913641] pci 0004:01:00.0: disabling bridge mem windows [ 0.913769] pci 0004:01:00.0: supports D1 D2 [ 0.913773] pci 0004:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.913892] pci 0004:00:00.0: PCI bridge to [bus 01-02] [ 0.913900] pci 0004:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.914108] pci 0004:02:00.0: [1a03:2000] type 00 class 0x030000 [ 0.914160] pci 0004:02:00.0: reg 0x10: [mem 0x600c200000000-0x600c200ffffff] [ 0.914183] pci 0004:02:00.0: reg 0x14: [mem 0x600c201000000-0x600c20101ffff] [ 0.914204] pci 0004:02:00.0: reg 0x18: [io 0x0000-0x007f] [ 0.914288] pci 0004:02:00.0: Disabling memory decoding and releasing memory resources. [ 0.914374] pci 0004:02:00.0: supports D1 D2 [ 0.914378] pci 0004:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.914474] pci 0004:01:00.0: PCI bridge to [bus 02] [ 0.914563] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to 02 [ 0.914626] PCI host bridge to bus 0005:00 [ 0.914631] pci_bus 0005:00: root bus resource [mem 0x600c280000000-0x600c2fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.914635] pci_bus 0005:00: root bus resource [mem 0x6028000000000-0x602bf7fffffff 64bit pref] [ 0.914639] pci_bus 0005:00: root bus resource [bus 00-ff] [ 0.914643] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to ff [ 0.914673] pci 0005:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.914764] pci 0005:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.914772] pci 0005:00:00.0: disabling bridge mem windows [ 0.914867] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold [ 0.915117] pci 0005:01:00.0: [104c:8241] type 00 class 0x0c0330 [ 0.915180] pci 0005:01:00.0: reg 0x10: [mem 0x600c280000000-0x600c28000ffff 64bit] [ 0.915210] pci 0005:01:00.0: reg 0x18: [mem 0x600c280010000-0x600c280011fff 64bit] [ 0.915284] pci 0005:01:00.0: Disabling memory decoding and releasing memory resources. [ 0.915293] pci 0005:01:00.0: BAR2 [mem size 0x00002000 64bit]: requesting alignment to 0x10000 [ 0.915414] pci 0005:01:00.0: supports D1 D2 [ 0.915417] pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot [ 0.915534] pci 0005:00:00.0: PCI bridge to [bus 01] [ 0.915542] pci 0005:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.915634] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.915694] PCI host bridge to bus 0030:00 [ 0.915699] pci_bus 0030:00: root bus resource [mem 0x620c000000000-0x620c07ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.915703] pci_bus 0030:00: root bus resource [mem 0x6200000000000-0x6203fbfffffff 64bit pref] [ 0.915707] pci_bus 0030:00: root bus resource [bus 00-ff] [ 0.915711] pci_bus 0030:00: busn_res: [bus 00-ff] end is updated to ff [ 0.915745] pci 0030:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.915854] pci 0030:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.915863] pci 0030:00:00.0: disabling bridge mem windows [ 0.915976] pci 0030:00:00.0: PME# supported from D0 D3hot D3cold [ 0.916232] pci 0030:01:00.0: [1077:2261] type 00 class 0x0c0400 [ 0.916328] pci 0030:01:00.0: reg 0x10: [mem 0x6200000200000-0x6200000200fff 64bit pref] [ 0.916370] pci 0030:01:00.0: reg 0x18: [mem 0x6200000210000-0x6200000211fff 64bit pref] [ 0.916412] pci 0030:01:00.0: reg 0x20: [mem 0x6200000000000-0x62000000fffff 64bit pref] [ 0.916440] pci 0030:01:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.916467] pci 0030:01:00.0: Disabling memory decoding and releasing memory resources. [ 0.916478] pci 0030:01:00.0: BAR0 [mem size 0x00001000 64bit pref]: requesting alignment to 0x10000 [ 0.916482] pci 0030:01:00.0: BAR2 [mem size 0x00002000 64bit pref]: requesting alignment to 0x10000 [ 0.916837] pci 0030:01:00.1: [1077:2261] type 00 class 0x0c0400 [ 0.916930] pci 0030:01:00.1: reg 0x10: [mem 0x6200000220000-0x6200000220fff 64bit pref] [ 0.916972] pci 0030:01:00.1: reg 0x18: [mem 0x6200000230000-0x6200000231fff 64bit pref] [ 0.917015] pci 0030:01:00.1: reg 0x20: [mem 0x6200000100000-0x62000001fffff 64bit pref] [ 0.917042] pci 0030:01:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 0.917070] pci 0030:01:00.1: Disabling memory decoding and releasing memory resources. [ 0.917081] pci 0030:01:00.1: BAR0 [mem size 0x00001000 64bit pref]: requesting alignment to 0x10000 [ 0.917085] pci 0030:01:00.1: BAR2 [mem size 0x00002000 64bit pref]: requesting alignment to 0x10000 [ 0.917375] pci 0030:00:00.0: PCI bridge to [bus 01] [ 0.917384] pci 0030:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.917553] pci_bus 0030:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.917616] PCI host bridge to bus 0031:00 [ 0.917621] pci_bus 0031:00: root bus resource [mem 0x620c080000000-0x620c0fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.917625] pci_bus 0031:00: root bus resource [mem 0x6204000000000-0x6207f7fffffff 64bit pref] [ 0.917629] pci_bus 0031:00: root bus resource [bus 00-ff] [ 0.917633] pci_bus 0031:00: busn_res: [bus 00-ff] end is updated to ff [ 0.917669] pci 0031:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.917779] pci 0031:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.917787] pci 0031:00:00.0: disabling bridge mem windows [ 0.917902] pci 0031:00:00.0: PME# supported from D0 D3hot D3cold [ 0.918167] pci 0031:01:00.0: [8086:10fb] type 00 class 0x020000 [ 0.918244] pci 0031:01:00.0: reg 0x10: [mem 0x6204000000000-0x620400007ffff 64bit pref] [ 0.918269] pci 0031:01:00.0: reg 0x18: [io 0x0000-0x001f] [ 0.918326] pci 0031:01:00.0: reg 0x20: [mem 0x6204000100000-0x6204000103fff 64bit pref] [ 0.918351] pci 0031:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.918376] pci 0031:01:00.0: Disabling memory decoding and releasing memory resources. [ 0.918386] pci 0031:01:00.0: BAR4 [mem size 0x00004000 64bit pref]: requesting alignment to 0x10000 [ 0.918545] pci 0031:01:00.0: PME# supported from D0 D3hot D3cold [ 0.918650] pci 0031:01:00.0: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.918655] pci 0031:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR0 for 64 VFs) [ 0.918700] pci 0031:01:00.0: reg 0x190: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.918704] pci 0031:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR3 for 64 VFs) [ 0.919321] pci 0031:01:00.0: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.919325] pci 0031:01:00.0: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.919468] pci 0031:01:00.1: [8086:10fb] type 00 class 0x020000 [ 0.919547] pci 0031:01:00.1: reg 0x10: [mem 0x6204000080000-0x62040000fffff 64bit pref] [ 0.919571] pci 0031:01:00.1: reg 0x18: [io 0x0000-0x001f] [ 0.919628] pci 0031:01:00.1: reg 0x20: [mem 0x6204000110000-0x6204000113fff 64bit pref] [ 0.919652] pci 0031:01:00.1: reg 0x30: [mem 0x00000000-0x0007ffff pref] [ 0.919677] pci 0031:01:00.1: Disabling memory decoding and releasing memory resources. [ 0.919687] pci 0031:01:00.1: BAR4 [mem size 0x00004000 64bit pref]: requesting alignment to 0x10000 [ 0.919850] pci 0031:01:00.1: PME# supported from D0 D3hot D3cold [ 0.919939] pci 0031:01:00.1: reg 0x184: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.919943] pci 0031:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR0 for 64 VFs) [ 0.919989] pci 0031:01:00.1: reg 0x190: [mem 0x00000000-0x0000ffff 64bit pref] [ 0.919993] pci 0031:01:00.1: VF(n) BAR3 space: [mem 0x00000000-0x003fffff 64bit pref] (contains BAR3 for 64 VFs) [ 0.920619] pci 0031:01:00.1: VF BAR0: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.920623] pci 0031:01:00.1: VF BAR3: [mem 0x00000000-0x00ffffff 64bit pref] (expanded to 256 VFs for PE alignment) [ 0.920714] pci 0031:00:00.0: PCI bridge to [bus 01] [ 0.920722] pci 0031:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.920893] pci_bus 0031:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.920956] PCI host bridge to bus 0032:00 [ 0.920962] pci_bus 0032:00: root bus resource [mem 0x620c100000000-0x620c17ffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.920965] pci_bus 0032:00: root bus resource [mem 0x6208000000000-0x620bf7fffffff 64bit pref] [ 0.920969] pci_bus 0032:00: root bus resource [bus 00-ff] [ 0.920973] pci_bus 0032:00: busn_res: [bus 00-ff] end is updated to ff [ 0.921007] pci 0032:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.921102] pci 0032:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.921110] pci 0032:00:00.0: disabling bridge mem windows [ 0.921225] pci 0032:00:00.0: PME# supported from D0 D3hot D3cold [ 0.921453] pci 0032:00:00.0: PCI bridge to [bus 01-ff] [ 0.921462] pci 0032:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.921497] pci_bus 0032:00: busn_res: [bus 00-ff] end is updated to ff [ 0.921558] PCI host bridge to bus 0033:00 [ 0.921562] pci_bus 0033:00: root bus resource [mem 0x620c180000000-0x620c1fffeffff] (bus address [0x80000000-0xfffeffff]) [ 0.921566] pci_bus 0033:00: root bus resource [mem 0x6220000000000-0x6223fbfffffff 64bit pref] [ 0.921570] pci_bus 0033:00: root bus resource [bus 00-ff] [ 0.921574] pci_bus 0033:00: busn_res: [bus 00-ff] end is updated to ff [ 0.921607] pci 0033:00:00.0: [1014:04c1] type 01 class 0x060400 [ 0.921717] pci 0033:00:00.0: Disabling memory decoding and releasing memory resources. [ 0.921725] pci 0033:00:00.0: disabling bridge mem windows [ 0.921839] pci 0033:00:00.0: PME# supported from D0 D3hot D3cold [ 0.922090] pci 0033:01:00.0: [1000:00c9] type 00 class 0x010700 [ 0.922157] pci 0033:01:00.0: reg 0x10: [io 0x0000-0x00ff] [ 0.922192] pci 0033:01:00.0: reg 0x14: [mem 0x620c180100000-0x620c18010ffff 64bit] [ 0.922275] pci 0033:01:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref] [ 0.922303] pci 0033:01:00.0: Disabling memory decoding and releasing memory resources. [ 0.922484] pci 0033:01:00.0: supports D1 D2 [ 0.922633] pci 0033:00:00.0: PCI bridge to [bus 01] [ 0.922642] pci 0033:00:00.0: bridge window [io 0x0000-0x0fff] [ 0.922739] pci_bus 0033:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.922779] pci 0000:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe [ 0.923077] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.923101] pci_bus 0000:00: resource 4 [mem 0x600c000000000-0x600c07ffeffff] [ 0.923105] pci_bus 0000:00: resource 5 [mem 0x6000000000000-0x6003fbfffffff 64bit pref] [ 0.923130] pci 0001:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 0.923424] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 0.923447] pci_bus 0001:00: resource 4 [mem 0x600c080000000-0x600c0fffeffff] [ 0.923450] pci_bus 0001:00: resource 5 [mem 0x6004000000000-0x6007f7fffffff 64bit pref] [ 0.923455] pci_bus 0002:00: max bus depth: 1 pci_try_num: 2 [ 0.923485] pci 0002:00:00.0: BAR 15: assigned [mem 0x6008000000000-0x600803fffffff 64bit pref] [ 0.923489] pci 0002:00:00.0: BAR 14: assigned [mem 0x600c100000000-0x600c1007fffff] [ 0.923506] pci 0002:01:00.0: BAR 7: assigned [mem 0x6008000000000-0x6008000ffffff 64bit pref] [ 0.923519] pci 0002:01:00.0: BAR 10: assigned [mem 0x6008001000000-0x6008001ffffff 64bit pref] [ 0.923531] pci 0002:01:00.1: BAR 7: assigned [mem 0x6008002000000-0x6008002ffffff 64bit pref] [ 0.923543] pci 0002:01:00.1: BAR 10: assigned [mem 0x6008003000000-0x6008003ffffff 64bit pref] [ 0.923555] pci 0002:01:00.2: BAR 7: assigned [mem 0x6008004000000-0x6008004ffffff 64bit pref] [ 0.923567] pci 0002:01:00.2: BAR 10: assigned [mem 0x6008005000000-0x6008005ffffff 64bit pref] [ 0.923579] pci 0002:01:00.3: BAR 7: assigned [mem 0x6008006000000-0x6008006ffffff 64bit pref] [ 0.923592] pci 0002:01:00.3: BAR 10: assigned [mem 0x6008007000000-0x6008007ffffff 64bit pref] [ 0.923604] pci 0002:01:00.0: BAR 0: assigned [mem 0x6008008000000-0x60080087fffff 64bit pref] [ 0.923626] pci 0002:01:00.1: BAR 0: assigned [mem 0x6008008800000-0x6008008ffffff 64bit pref] [ 0.923648] pci 0002:01:00.2: BAR 0: assigned [mem 0x6008009000000-0x60080097fffff 64bit pref] [ 0.923670] pci 0002:01:00.3: BAR 0: assigned [mem 0x6008009800000-0x6008009ffffff 64bit pref] [ 0.923693] pci 0002:01:00.0: BAR 6: assigned [mem 0x600c100000000-0x600c10007ffff pref] [ 0.923697] pci 0002:01:00.1: BAR 6: assigned [mem 0x600c100080000-0x600c1000fffff pref] [ 0.923701] pci 0002:01:00.2: BAR 6: assigned [mem 0x600c100100000-0x600c10017ffff pref] [ 0.923705] pci 0002:01:00.3: BAR 6: assigned [mem 0x600c100180000-0x600c1001fffff pref] [ 0.923710] pci 0002:01:00.0: BAR 3: assigned [mem 0x600800a000000-0x600800a007fff 64bit pref] [ 0.923731] pci 0002:01:00.1: BAR 3: assigned [mem 0x600800a010000-0x600800a017fff 64bit pref] [ 0.923753] pci 0002:01:00.2: BAR 3: assigned [mem 0x600800a020000-0x600800a027fff 64bit pref] [ 0.923776] pci 0002:01:00.3: BAR 3: assigned [mem 0x600800a030000-0x600800a037fff 64bit pref] [ 0.923800] pci 0002:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 0.924112] pci 0002:01 : [PE# 00] Secondary bus 1 associated with PE#0 [ 0.924424] pci 0002:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 [ 0.930550] IOMMU table initialized, virtual merging enabled [ 0.930555] pci 0002:01 : [PE# 00] Setting up window#0 0..7fffffff pg=1000 [ 0.930676] pci 0002:01 : [PE# 00] Enabling 64-bit DMA bypass [ 0.930685] iommu: Adding device 0002:01:00.0 to group 0 [ 0.930691] iommu: Adding device 0002:01:00.1 to group 0 [ 0.930696] iommu: Adding device 0002:01:00.2 to group 0 [ 0.930702] iommu: Adding device 0002:01:00.3 to group 0 [ 0.930705] pci 0002:00:00.0: PCI bridge to [bus 01] [ 0.930716] pci 0002:00:00.0: bridge window [mem 0x600c100000000-0x600c17fefffff] [ 0.930724] pci 0002:00:00.0: bridge window [mem 0x6008000000000-0x600bf7ff0ffff 64bit pref] [ 0.930736] pci_bus 0002:00: resource 4 [mem 0x600c100000000-0x600c17ffeffff] [ 0.930740] pci_bus 0002:00: resource 5 [mem 0x6008000000000-0x600bf7fffffff 64bit pref] [ 0.930744] pci_bus 0002:01: resource 1 [mem 0x600c100000000-0x600c17fefffff] [ 0.930748] pci_bus 0002:01: resource 2 [mem 0x6008000000000-0x600bf7ff0ffff 64bit pref] [ 0.930775] pci 0003:00:00.0: BAR 14: assigned [mem 0x600c180000000-0x600c1803fffff] [ 0.930781] pci 0003:01:00.0: BAR 0: assigned [mem 0x600c180000000-0x600c1800fffff 64bit] [ 0.930803] pci 0003:01:00.0: BAR 6: assigned [mem 0x600c180100000-0x600c18017ffff pref] [ 0.930807] pci 0003:01:00.0: BAR 2: assigned [mem 0x600c180180000-0x600c1801803ff 64bit] [ 0.930829] pci 0003:01:00.0: BAR 4: no space for [io size 0x0100] [ 0.930832] pci 0003:01:00.0: BAR 4: failed to assign [io size 0x0100] [ 0.930837] pci 0003:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe [ 0.931136] pci 0003:01 : [PE# 1fd] Secondary bus 1 associated with PE#1fd [ 0.931442] pci 0003:01 : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000 [ 0.937522] pci 0003:01 : [PE# 1fd] Setting up window#0 0..7fffffff pg=1000 [ 0.937530] pci 0003:01 : [PE# 1fd] Enabling 64-bit DMA bypass [ 0.937539] iommu: Adding device 0003:01:00.0 to group 1 [ 0.937542] pci 0003:00:00.0: PCI bridge to [bus 01] [ 0.937553] pci 0003:00:00.0: bridge window [mem 0x600c180000000-0x600c1ffefffff] [ 0.937569] pci_bus 0003:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.937573] pci_bus 0003:00: resource 4 [mem 0x600c180000000-0x600c1fffeffff] [ 0.937576] pci_bus 0003:00: resource 5 [mem 0x6020000000000-0x6023fbfffffff 64bit pref] [ 0.937580] pci_bus 0003:01: resource 1 [mem 0x600c180000000-0x600c1ffefffff] [ 0.937626] pci 0004:00:00.0: BAR 14: assigned [mem 0x600c200000000-0x600c2017fffff] [ 0.937631] pci 0004:01:00.0: BAR 14: assigned [mem 0x600c200000000-0x600c2017fffff] [ 0.937635] pci 0004:01:00.0: BAR 13: no space for [io size 0x1000] [ 0.937638] pci 0004:01:00.0: BAR 13: failed to assign [io size 0x1000] [ 0.937644] pci 0004:02:00.0: BAR 0: assigned [mem 0x600c200000000-0x600c200ffffff] [ 0.937654] pci 0004:02:00.0: BAR 1: assigned [mem 0x600c201000000-0x600c20101ffff] [ 0.937663] pci 0004:02:00.0: BAR 2: no space for [io size 0x0080] [ 0.937666] pci 0004:02:00.0: BAR 2: failed to assign [io size 0x0080] [ 0.937671] pci 0004:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 0.937970] pci 0004:02 : [PE# fd] Secondary bus 2..2 associated with PE#fd [ 0.938276] pci 0004:02 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 [ 0.944367] pci 0004:02 : [PE# fd] Setting up window#0 0..7fffffff pg=1000 [ 0.944374] pci 0004:02 : [PE# fd] Enabling 64-bit DMA bypass [ 0.944383] iommu: Adding device 0004:02:00.0 to group 2 [ 0.944386] pci 0004:01:00.0: PCI bridge to [bus 02] [ 0.944399] pci 0004:01:00.0: bridge window [mem 0x600c200000000-0x600c27fefffff] [ 0.944419] pci 0004:01 : [PE# fc] Secondary bus 1 associated with PE#fc [ 0.944714] pci 0004:00:00.0: PCI bridge to [bus 01-02] [ 0.944724] pci 0004:00:00.0: bridge window [mem 0x600c200000000-0x600c27fefffff] [ 0.944740] pci_bus 0004:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.944743] pci_bus 0004:00: resource 4 [mem 0x600c200000000-0x600c27ffeffff] [ 0.944747] pci_bus 0004:00: resource 5 [mem 0x6024000000000-0x6027f7fffffff 64bit pref] [ 0.944751] pci_bus 0004:01: resource 1 [mem 0x600c200000000-0x600c27fefffff] [ 0.944754] pci_bus 0004:02: resource 1 [mem 0x600c200000000-0x600c27fefffff] [ 0.944784] pci 0005:00:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2807fffff] [ 0.944790] pci 0005:01:00.0: BAR 0: assigned [mem 0x600c280000000-0x600c28000ffff 64bit] [ 0.944813] pci 0005:01:00.0: BAR 2: assigned [mem 0x600c280010000-0x600c280011fff 64bit] [ 0.944834] pci 0005:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 0.945132] pci 0005:01 : [PE# fd] Secondary bus 1 associated with PE#fd [ 0.945443] pci 0005:01 : [PE# fd] Setting up 32-bit TCE table at 0..80000000 [ 0.951524] pci 0005:01 : [PE# fd] Setting up window#0 0..7fffffff pg=1000 [ 0.951531] pci 0005:01 : [PE# fd] Enabling 64-bit DMA bypass [ 0.951541] iommu: Adding device 0005:01:00.0 to group 3 [ 0.951544] pci 0005:00:00.0: PCI bridge to [bus 01] [ 0.951555] pci 0005:00:00.0: bridge window [mem 0x600c280000000-0x600c2ffefffff] [ 0.951571] pci_bus 0005:00: resource 4 [mem 0x600c280000000-0x600c2fffeffff] [ 0.951575] pci_bus 0005:00: resource 5 [mem 0x6028000000000-0x602bf7fffffff 64bit pref] [ 0.951579] pci_bus 0005:01: resource 1 [mem 0x600c280000000-0x600c2ffefffff] [ 0.951613] pci 0030:00:00.0: BAR 15: assigned [mem 0x6200000000000-0x620001fffffff 64bit pref] [ 0.951618] pci 0030:00:00.0: BAR 14: assigned [mem 0x620c000000000-0x620c0003fffff] [ 0.951624] pci 0030:01:00.0: BAR 4: assigned [mem 0x6200000000000-0x62000000fffff 64bit pref] [ 0.951653] pci 0030:01:00.1: BAR 4: assigned [mem 0x6200000100000-0x62000001fffff 64bit pref] [ 0.951682] pci 0030:01:00.0: BAR 6: assigned [mem 0x620c000000000-0x620c00003ffff pref] [ 0.951686] pci 0030:01:00.1: BAR 6: assigned [mem 0x620c000040000-0x620c00007ffff pref] [ 0.951690] pci 0030:01:00.0: BAR 0: assigned [mem 0x6200000200000-0x6200000200fff 64bit pref] [ 0.951717] pci 0030:01:00.0: BAR 2: assigned [mem 0x6200000210000-0x6200000211fff 64bit pref] [ 0.951745] pci 0030:01:00.1: BAR 0: assigned [mem 0x6200000220000-0x6200000220fff 64bit pref] [ 0.951773] pci 0030:01:00.1: BAR 2: assigned [mem 0x6200000230000-0x6200000231fff 64bit pref] [ 0.951801] pci 0030:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe [ 0.952124] pci 0030:01 : [PE# 00] Secondary bus 1 associated with PE#0 [ 0.952432] pci 0030:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 [ 0.958533] pci 0030:01 : [PE# 00] Setting up window#0 0..7fffffff pg=1000 [ 0.958639] pci 0030:01 : [PE# 00] Enabling 64-bit DMA bypass [ 0.958648] iommu: Adding device 0030:01:00.0 to group 4 [ 0.958655] iommu: Adding device 0030:01:00.1 to group 4 [ 0.958659] pci 0030:00:00.0: PCI bridge to [bus 01] [ 0.958671] pci 0030:00:00.0: bridge window [mem 0x620c000000000-0x620c07fefffff] [ 0.958679] pci 0030:00:00.0: bridge window [mem 0x6200000000000-0x6203fbff0ffff 64bit pref] [ 0.958693] pci_bus 0030:00: resource 4 [mem 0x620c000000000-0x620c07ffeffff] [ 0.958697] pci_bus 0030:00: resource 5 [mem 0x6200000000000-0x6203fbfffffff 64bit pref] [ 0.958700] pci_bus 0030:01: resource 1 [mem 0x620c000000000-0x620c07fefffff] [ 0.958704] pci_bus 0030:01: resource 2 [mem 0x6200000000000-0x6203fbff0ffff 64bit pref] [ 0.958710] pci_bus 0031:00: max bus depth: 1 pci_try_num: 2 [ 0.958744] pci 0031:00:00.0: BAR 15: assigned [mem 0x6204000000000-0x620403fffffff 64bit pref] [ 0.958748] pci 0031:00:00.0: BAR 14: assigned [mem 0x620c080000000-0x620c0807fffff] [ 0.958757] pci 0031:01:00.0: BAR 7: assigned [mem 0x6204000000000-0x6204000ffffff 64bit pref] [ 0.958772] pci 0031:01:00.0: BAR 10: assigned [mem 0x6204001000000-0x6204001ffffff 64bit pref] [ 0.958785] pci 0031:01:00.1: BAR 7: assigned [mem 0x6204002000000-0x6204002ffffff 64bit pref] [ 0.958799] pci 0031:01:00.1: BAR 10: assigned [mem 0x6204003000000-0x6204003ffffff 64bit pref] [ 0.958812] pci 0031:01:00.0: BAR 0: assigned [mem 0x6204004000000-0x620400407ffff 64bit pref] [ 0.958837] pci 0031:01:00.0: BAR 6: assigned [mem 0x620c080000000-0x620c08007ffff pref] [ 0.958841] pci 0031:01:00.1: BAR 0: assigned [mem 0x6204004080000-0x62040040fffff 64bit pref] [ 0.958867] pci 0031:01:00.1: BAR 6: assigned [mem 0x620c080080000-0x620c0800fffff pref] [ 0.958871] pci 0031:01:00.0: BAR 4: assigned [mem 0x6204004100000-0x6204004103fff 64bit pref] [ 0.958896] pci 0031:01:00.1: BAR 4: assigned [mem 0x6204004110000-0x6204004113fff 64bit pref] [ 0.958920] pci 0031:01:00.0: BAR 2: no space for [io size 0x0020] [ 0.958924] pci 0031:01:00.0: BAR 2: failed to assign [io size 0x0020] [ 0.958927] pci 0031:01:00.1: BAR 2: no space for [io size 0x0020] [ 0.958931] pci 0031:01:00.1: BAR 2: failed to assign [io size 0x0020] [ 0.958936] pci 0031:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 0.959243] pci 0031:01 : [PE# 00] Secondary bus 1 associated with PE#0 [ 0.959551] pci 0031:01 : [PE# 00] Setting up 32-bit TCE table at 0..80000000 [ 0.965640] pci 0031:01 : [PE# 00] Setting up window#0 0..7fffffff pg=1000 [ 0.965648] pci 0031:01 : [PE# 00] Enabling 64-bit DMA bypass [ 0.965657] iommu: Adding device 0031:01:00.0 to group 5 [ 0.965665] iommu: Adding device 0031:01:00.1 to group 5 [ 0.965668] pci 0031:00:00.0: PCI bridge to [bus 01] [ 0.965680] pci 0031:00:00.0: bridge window [mem 0x620c080000000-0x620c0ffefffff] [ 0.965689] pci 0031:00:00.0: bridge window [mem 0x6204000000000-0x6207f7ff0ffff 64bit pref] [ 0.965702] pci_bus 0031:00: No. 2 try to assign unassigned res [ 0.965732] pci 0031:01:00.0: BAR 2: no space for [io size 0x0020] [ 0.965735] pci 0031:01:00.0: BAR 2: failed to assign [io size 0x0020] [ 0.965739] pci 0031:01:00.1: BAR 2: no space for [io size 0x0020] [ 0.965742] pci 0031:01:00.1: BAR 2: failed to assign [io size 0x0020] [ 0.965759] pci 0031:00:00.0: PCI bridge to [bus 01] [ 0.965770] pci 0031:00:00.0: bridge window [mem 0x620c080000000-0x620c0ffefffff] [ 0.965778] pci 0031:00:00.0: bridge window [mem 0x6204000000000-0x6207f7ff0ffff 64bit pref] [ 0.965791] pci_bus 0031:00: Automatically enabled pci realloc, if you have problem, try booting with pci=realloc=off [ 0.965794] pci_bus 0031:00: resource 4 [mem 0x620c080000000-0x620c0fffeffff] [ 0.965798] pci_bus 0031:00: resource 5 [mem 0x6204000000000-0x6207f7fffffff 64bit pref] [ 0.965802] pci_bus 0031:01: resource 1 [mem 0x620c080000000-0x620c0ffefffff] [ 0.965806] pci_bus 0031:01: resource 2 [mem 0x6204000000000-0x6207f7ff0ffff 64bit pref] [ 0.965836] pci 0032:00 : [PE# fe] Secondary bus 0 associated with PE#fe [ 0.966131] pci 0032:00:00.0: PCI bridge to [bus 01-ff] [ 0.966158] pci_bus 0032:00: resource 4 [mem 0x620c100000000-0x620c17ffeffff] [ 0.966161] pci_bus 0032:00: resource 5 [mem 0x6208000000000-0x620bf7fffffff 64bit pref] [ 0.966194] pci 0033:00:00.0: BAR 14: assigned [mem 0x620c180000000-0x620c1803fffff] [ 0.966199] pci 0033:01:00.0: BAR 6: assigned [mem 0x620c180000000-0x620c1800fffff pref] [ 0.966204] pci 0033:01:00.0: BAR 1: assigned [mem 0x620c180100000-0x620c18010ffff 64bit] [ 0.966229] pci 0033:01:00.0: BAR 0: no space for [io size 0x0100] [ 0.966232] pci 0033:01:00.0: BAR 0: failed to assign [io size 0x0100] [ 0.966237] pci 0033:00 : [PE# 1fe] Secondary bus 0 associated with PE#1fe [ 0.966538] pci 0033:01 : [PE# 1fd] Secondary bus 1 associated with PE#1fd [ 0.966847] pci 0033:01 : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000 [ 0.972929] pci 0033:01 : [PE# 1fd] Setting up window#0 0..7fffffff pg=1000 [ 0.972937] pci 0033:01 : [PE# 1fd] Enabling 64-bit DMA bypass [ 0.972947] iommu: Adding device 0033:01:00.0 to group 6 [ 0.972950] pci 0033:00:00.0: PCI bridge to [bus 01] [ 0.972963] pci 0033:00:00.0: bridge window [mem 0x620c180000000-0x620c1ffefffff] [ 0.972981] pci_bus 0033:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 0.972985] pci_bus 0033:00: resource 4 [mem 0x620c180000000-0x620c1fffeffff] [ 0.972989] pci_bus 0033:00: resource 5 [mem 0x6220000000000-0x6223fbfffffff 64bit pref] [ 0.972992] pci_bus 0033:01: resource 1 [mem 0x620c180000000-0x620c1ffefffff] [ 0.974794] PCI: Probing PCI hardware done [ 0.977737] cpuidle-powernv: Default stop: psscr = 0x0000000000000330,mask=0x00000000003003ff [ 0.977739] cpuidle-powernv: Deepest stop: psscr = 0x0000000000300375,mask=0x00000000003003ff [ 0.977740] cpuidle-powernv: Requested Level (RL) value of first deep stop = 0x4 [ 0.985292] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.985294] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.988730] SCSI subsystem initialized [ 0.989043] libata version 3.00 loaded. [ 0.989117] pci 0004:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 0.989127] pci 0004:02:00.0: vgaarb: bridge control possible [ 0.989132] pci 0004:02:00.0: vgaarb: setting as boot device (VGA legacy resources not available) [ 0.989133] vgaarb: loaded [ 0.989195] usbcore: registered new interface driver usbfs [ 0.989211] usbcore: registered new interface driver hub [ 0.989665] usbcore: registered new device driver usb [ 0.989733] pps_core: LinuxPPS API ver. 1 registered [ 0.989735] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.989740] PTP clock support registered [ 0.990296] EDAC MC: Ver: 3.0.0 [ 0.990783] NetLabel: Initializing [ 0.990784] NetLabel: domain hash size = 128 [ 0.990785] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.990812] NetLabel: unlabeled traffic allowed by default [ 0.991837] clocksource: Switched to clocksource timebase [ 1.019053] VFS: Disk quotas dquot_6.6.0 [ 1.019343] VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes) [ 1.019855] AppArmor: AppArmor Filesystem Enabled [ 1.023937] NET: Registered protocol family 2 [ 1.024346] TCP established hash table entries: 524288 (order: 6, 4194304 bytes) [ 1.026004] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes) [ 1.026238] TCP: Hash tables configured (established 524288 bind 65536) [ 1.026600] UDP hash table entries: 65536 (order: 5, 2097152 bytes) [ 1.027276] UDP-Lite hash table entries: 65536 (order: 5, 2097152 bytes) [ 1.028512] NET: Registered protocol family 1 [ 1.028591] pci 0005:00:00.0: enabling device (0101 -> 0103) [ 1.028602] pci 0005:01:00.0: enabling device (0140 -> 0142) [ 1.028684] pci 0030:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 1.028691] pci 0030:01:00.1: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 1.028723] PCI: CLS 64 bytes, default 128 [ 1.028789] Unpacking initramfs... [ 2.433703] Freeing initrd memory: 53632K [ 2.437105] nest_capp0_imc performance monitor hardware support registered [ 2.437183] nest_capp1_imc performance monitor hardware support registered [ 2.440815] core_imc performance monitor hardware support registered [ 2.440887] nest_mba0_imc performance monitor hardware support registered [ 2.440945] nest_mba1_imc performance monitor hardware support registered [ 2.441004] nest_mba2_imc performance monitor hardware support registered [ 2.441061] nest_mba3_imc performance monitor hardware support registered [ 2.441119] nest_mba4_imc performance monitor hardware support registered [ 2.441176] nest_mba5_imc performance monitor hardware support registered [ 2.441235] nest_mba6_imc performance monitor hardware support registered [ 2.441292] nest_mba7_imc performance monitor hardware support registered [ 2.441371] nest_mcs01_imc performance monitor hardware support registered [ 2.441443] nest_mcs23_imc performance monitor hardware support registered [ 2.441562] nest_nvlink0_imc performance monitor hardware support registered [ 2.441663] nest_nvlink1_imc performance monitor hardware support registered [ 2.441765] nest_nvlink2_imc performance monitor hardware support registered [ 2.441865] nest_nvlink3_imc performance monitor hardware support registered [ 2.441968] nest_nvlink4_imc performance monitor hardware support registered [ 2.442070] nest_nvlink5_imc performance monitor hardware support registered [ 2.442147] nest_nx_imc performance monitor hardware support registered [ 2.442211] nest_phb0_imc performance monitor hardware support registered [ 2.442275] nest_phb1_imc performance monitor hardware support registered [ 2.442337] nest_phb2_imc performance monitor hardware support registered [ 2.442401] nest_phb3_imc performance monitor hardware support registered [ 2.442463] nest_phb4_imc performance monitor hardware support registered [ 2.442531] nest_phb5_imc performance monitor hardware support registered [ 2.442644] nest_powerbus0_imc performance monitor hardware support registered [ 2.446406] thread_imc performance monitor hardware support registered [ 2.446490] nest_xlink0_imc performance monitor hardware support registered [ 2.446569] nest_xlink1_imc performance monitor hardware support registered [ 2.446646] nest_xlink2_imc performance monitor hardware support registered [ 2.464945] Initialise system trusted keyrings [ 2.464959] Key type blacklist registered [ 2.465077] workingset: timestamp_bits=38 max_order=21 bucket_order=0 [ 2.468031] zbud: loaded [ 2.471609] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.472412] fuse init (API version 7.26) [ 2.475614] Key type asymmetric registered [ 2.475617] Asymmetric key parser 'x509' registered [ 2.475863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244) [ 2.476174] io scheduler noop registered [ 2.476176] io scheduler deadline registered [ 2.476621] io scheduler cfq registered (default) [ 2.479079] pci 0004:00:00.0: enabling device (0101 -> 0103) [ 2.479097] pci 0004:01:00.0: enabling device (0141 -> 0143) [ 2.479110] pci 0004:02:00.0: enabling device (0141 -> 0143) [ 2.479119] Using unsupported 1024x768 vga at 600c200010000, depth=32, pitch=4096 [ 2.561776] Console: switching to colour frame buffer device 128x48 [ 2.644232] fb0: Open Firmware frame buffer device on /pciex@600c3c0400000/pci@0/pci@0/vga@0 [ 2.644486] hvc0: raw protocol on /ibm,opal/consoles/serial@0 (boot console) [ 2.644491] hvc0: No interrupts property, using OPAL event [ 2.644988] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.648733] Linux agpgart interface v0.103 [ 2.667773] loop: module loaded [ 2.668294] libphy: Fixed MDIO Bus: probed [ 2.668296] tun: Universal TUN/TAP device driver, 1.6 [ 2.668349] PPP generic driver version 2.4.2 [ 2.668447] VFIO - User Level meta-driver version: 0.3 [ 2.668604] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.668631] ehci-pci: EHCI PCI platform driver [ 2.668650] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.668653] ohci-pci: OHCI PCI platform driver [ 2.668672] uhci_hcd: USB Universal Host Controller Interface driver [ 2.668846] xhci_hcd 0005:01:00.0: xHCI Host Controller [ 2.668880] xhci_hcd 0005:01:00.0: new USB bus registered, assigned bus number 1 [ 2.668964] xhci_hcd 0005:01:00.0: Using 64-bit DMA iommu bypass [ 2.669031] xhci_hcd 0005:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x04000000 [ 2.669733] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.669736] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.669739] usb usb1: Product: xHCI Host Controller [ 2.669742] usb usb1: Manufacturer: Linux 4.15.0-15-generic xhci-hcd [ 2.669744] usb usb1: SerialNumber: 0005:01:00.0 [ 2.669999] hub 1-0:1.0: USB hub found [ 2.670015] hub 1-0:1.0: 4 ports detected [ 2.670304] xhci_hcd 0005:01:00.0: xHCI Host Controller [ 2.670310] xhci_hcd 0005:01:00.0: new USB bus registered, assigned bus number 2 [ 2.670347] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.670398] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.670401] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.670404] usb usb2: Product: xHCI Host Controller [ 2.670406] usb usb2: Manufacturer: Linux 4.15.0-15-generic xhci-hcd [ 2.670409] usb usb2: SerialNumber: 0005:01:00.0 [ 2.670597] hub 2-0:1.0: USB hub found [ 2.670610] hub 2-0:1.0: 4 ports detected [ 2.671478] mousedev: PS/2 mouse device common for all mice [ 2.672149] rtc-opal opal-rtc: rtc core: registered rtc-opal as rtc0 [ 2.672165] i2c /dev entries driver [ 2.674899] device-mapper: uevent: version 1.0.3 [ 2.675170] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.675182] powernv-cpufreq: cpufreq pstate min 98 nominal 98 max 0 [ 2.675183] powernv-cpufreq: Workload Optimized Frequency is enabled in the platform [ 2.691672] powernv_idle_driver registered [ 2.693585] ledtrig-cpu: registered to indicate activity on CPUs [ 2.694649] NET: Registered protocol family 10 [ 2.700261] Segment Routing with IPv6 [ 2.700278] NET: Registered protocol family 17 [ 2.700338] Key type dns_resolver registered [ 2.700511] registered taskstats version 1 [ 2.700520] Loading compiled-in X.509 certificates [ 2.703327] Loaded X.509 cert 'Build time autogenerated kernel key: 6182e82805bdbd8cecf0b7af02522cd028d833ea' [ 2.703438] zswap: loaded using pool lzo/zbud [ 2.707499] Key type big_key registered [ 2.707502] Key type trusted registered [ 2.709217] Key type encrypted registered [ 2.709219] AppArmor: AppArmor sha1 policy hashing enabled [ 2.709222] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.709245] evm: HMAC attrs: 0x1 [ 2.710099] rtc-opal opal-rtc: setting system clock to 2018-04-10 12:07:47 UTC (1523362067) [ 2.710492] integrity: Unable to open file: /etc/keys/x509_ima.der (-2) [ 2.710495] integrity: Unable to open file: /etc/keys/x509_evm.der (-2) [ 2.711755] Freeing unused kernel memory: 4800K [ 2.711783] This architecture does not have kernel memory protection. [ 2.811485] synth uevent: /devices/vio: failed to send uevent [ 2.811488] vio vio: uevent: failed to send synthetic uevent [ 3.003746] usb 1-3: new high-speed USB device number 2 using xhci_hcd [ 3.152718] usb 1-3: New USB device found, idVendor=0557, idProduct=7000 [ 3.152719] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.158487] hub 1-3:1.0: USB hub found [ 3.158836] hub 1-3:1.0: 4 ports detected [ 3.279827] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd [ 3.301825] usb 2-4: New USB device found, idVendor=0451, idProduct=8140 [ 3.301827] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.302470] hub 2-4:1.0: USB hub found [ 3.302821] hub 2-4:1.0: 4 ports detected [ 3.427744] usb 1-4: new high-speed USB device number 3 using xhci_hcd [ 3.578205] usb 1-4: New USB device found, idVendor=0451, idProduct=8142 [ 3.578206] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.578208] usb 1-4: SerialNumber: AB0D20692D00 [ 3.582473] hub 1-4:1.0: USB hub found [ 3.582826] hub 1-4:1.0: 4 ports detected [ 3.664922] Adaptec aacraid driver 1.2.1[50877]-custom [ 3.664971] pci 0003:00:00.0: enabling device (0101 -> 0103) [ 3.664979] aacraid 0003:01:00.0: enabling device (0140 -> 0142) [ 3.665554] i40e: Intel(R) Ethernet Connection XL710 Network Driver - version 2.1.14-k [ 3.665555] i40e: Copyright (c) 2013 - 2014 Intel Corporation. [ 3.665896] pci 0002:00:00.0: enabling device (0101 -> 0103) [ 3.665902] i40e 0002:01:00.0: enabling device (0140 -> 0142) [ 3.665907] i40e 0002:01:00.0: Using 64-bit DMA iommu bypass [ 3.672369] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 3.672370] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 3.672817] mpt3sas version 17.100.00.00 loaded [ 3.674303] pci 0031:00:00.0: enabling device (0101 -> 0103) [ 3.674313] ixgbe 0031:01:00.0: enabling device (0140 -> 0142) [ 3.674318] ixgbe 0031:01:00.0: Using 64-bit DMA iommu bypass [ 3.674603] pci 0033:00:00.0: enabling device (0101 -> 0103) [ 3.674608] mpt3sas 0033:01:00.0: enabling device (0140 -> 0142) [ 3.674614] mpt3sas 0033:01:00.0: Using 64-bit DMA iommu bypass [ 3.674618] mpt3sas_cm0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (133771392 kB) [ 3.676308] aacraid: Comm Interface type3 enabled [ 3.679343] i40e 0002:01:00.0: fw 5.1.40981 api 1.5 nvm 5.05 0x800029e1 1.1313.0 [ 3.679741] usb 1-3.1: new low-speed USB device number 4 using xhci_hcd [ 3.686900] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 10.00.00.02-k. [ 3.697230] pci 0030:00:00.0: enabling device (0101 -> 0103) [ 3.697236] qla2xxx 0030:01:00.0: enabling device (0140 -> 0142) [ 3.697267] qla2xxx [0030:01:00.0]-011c: : MSI-X vector count: 16. [ 3.697269] qla2xxx [0030:01:00.0]-001d: : Found an ISP2261 irq 40 iobase 0x000000009101338a. [ 3.697271] qla2xxx 0030:01:00.0: Using 64-bit DMA iommu bypass [ 3.752483] mpt3sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 3.752495] mpt3sas_cm0: MSI-X vectors supported: 96, no of cores: 160, max_msix_vectors: -1 [ 3.754729] mpt3sas0-msix0: PCI-MSI-X enabled: IRQ 123 [ 3.754730] mpt3sas0-msix1: PCI-MSI-X enabled: IRQ 124 [ 3.754731] mpt3sas0-msix2: PCI-MSI-X enabled: IRQ 125 [ 3.754731] mpt3sas0-msix3: PCI-MSI-X enabled: IRQ 126 [ 3.754732] mpt3sas0-msix4: PCI-MSI-X enabled: IRQ 127 [ 3.754732] mpt3sas0-msix5: PCI-MSI-X enabled: IRQ 128 [ 3.754733] mpt3sas0-msix6: PCI-MSI-X enabled: IRQ 129 [ 3.754734] mpt3sas0-msix7: PCI-MSI-X enabled: IRQ 130 [ 3.754734] mpt3sas0-msix8: PCI-MSI-X enabled: IRQ 131 [ 3.754735] mpt3sas0-msix9: PCI-MSI-X enabled: IRQ 132 [ 3.754735] mpt3sas0-msix10: PCI-MSI-X enabled: IRQ 133 [ 3.754736] mpt3sas0-msix11: PCI-MSI-X enabled: IRQ 134 [ 3.754736] mpt3sas0-msix12: PCI-MSI-X enabled: IRQ 135 [ 3.754737] mpt3sas0-msix13: PCI-MSI-X enabled: IRQ 136 [ 3.754737] mpt3sas0-msix14: PCI-MSI-X enabled: IRQ 137 [ 3.754738] mpt3sas0-msix15: PCI-MSI-X enabled: IRQ 138 [ 3.754738] mpt3sas0-msix16: PCI-MSI-X enabled: IRQ 139 [ 3.754739] mpt3sas0-msix17: PCI-MSI-X enabled: IRQ 140 [ 3.754739] mpt3sas0-msix18: PCI-MSI-X enabled: IRQ 141 [ 3.754740] mpt3sas0-msix19: PCI-MSI-X enabled: IRQ 142 [ 3.754740] mpt3sas0-msix20: PCI-MSI-X enabled: IRQ 143 [ 3.754741] mpt3sas0-msix21: PCI-MSI-X enabled: IRQ 144 [ 3.754741] mpt3sas0-msix22: PCI-MSI-X enabled: IRQ 145 [ 3.754742] mpt3sas0-msix23: PCI-MSI-X enabled: IRQ 146 [ 3.754742] mpt3sas0-msix24: PCI-MSI-X enabled: IRQ 147 [ 3.754743] mpt3sas0-msix25: PCI-MSI-X enabled: IRQ 148 [ 3.754743] mpt3sas0-msix26: PCI-MSI-X enabled: IRQ 149 [ 3.754744] mpt3sas0-msix27: PCI-MSI-X enabled: IRQ 150 [ 3.754745] mpt3sas0-msix28: PCI-MSI-X enabled: IRQ 151 [ 3.754745] mpt3sas0-msix29: PCI-MSI-X enabled: IRQ 152 [ 3.754746] mpt3sas0-msix30: PCI-MSI-X enabled: IRQ 153 [ 3.754746] mpt3sas0-msix31: PCI-MSI-X enabled: IRQ 154 [ 3.754747] mpt3sas0-msix32: PCI-MSI-X enabled: IRQ 155 [ 3.754747] mpt3sas0-msix33: PCI-MSI-X enabled: IRQ 156 [ 3.754748] mpt3sas0-msix34: PCI-MSI-X enabled: IRQ 157 [ 3.754748] mpt3sas0-msix35: PCI-MSI-X enabled: IRQ 158 [ 3.754749] mpt3sas0-msix36: PCI-MSI-X enabled: IRQ 159 [ 3.754749] mpt3sas0-msix37: PCI-MSI-X enabled: IRQ 160 [ 3.754750] mpt3sas0-msix38: PCI-MSI-X enabled: IRQ 161 [ 3.754750] mpt3sas0-msix39: PCI-MSI-X enabled: IRQ 162 [ 3.754751] mpt3sas0-msix40: PCI-MSI-X enabled: IRQ 163 [ 3.754751] mpt3sas0-msix41: PCI-MSI-X enabled: IRQ 164 [ 3.754752] mpt3sas0-msix42: PCI-MSI-X enabled: IRQ 165 [ 3.754753] mpt3sas0-msix43: PCI-MSI-X enabled: IRQ 166 [ 3.754753] mpt3sas0-msix44: PCI-MSI-X enabled: IRQ 167 [ 3.754754] mpt3sas0-msix45: PCI-MSI-X enabled: IRQ 168 [ 3.754754] mpt3sas0-msix46: PCI-MSI-X enabled: IRQ 169 [ 3.754755] mpt3sas0-msix47: PCI-MSI-X enabled: IRQ 170 [ 3.754755] mpt3sas0-msix48: PCI-MSI-X enabled: IRQ 171 [ 3.754756] mpt3sas0-msix49: PCI-MSI-X enabled: IRQ 172 [ 3.754756] mpt3sas0-msix50: PCI-MSI-X enabled: IRQ 173 [ 3.754757] mpt3sas0-msix51: PCI-MSI-X enabled: IRQ 174 [ 3.754758] mpt3sas0-msix52: PCI-MSI-X enabled: IRQ 175 [ 3.754758] mpt3sas0-msix53: PCI-MSI-X enabled: IRQ 176 [ 3.754759] mpt3sas0-msix54: PCI-MSI-X enabled: IRQ 177 [ 3.754759] mpt3sas0-msix55: PCI-MSI-X enabled: IRQ 178 [ 3.754760] mpt3sas0-msix56: PCI-MSI-X enabled: IRQ 179 [ 3.754760] mpt3sas0-msix57: PCI-MSI-X enabled: IRQ 180 [ 3.754761] mpt3sas0-msix58: PCI-MSI-X enabled: IRQ 181 [ 3.754761] mpt3sas0-msix59: PCI-MSI-X enabled: IRQ 182 [ 3.754762] mpt3sas0-msix60: PCI-MSI-X enabled: IRQ 183 [ 3.754763] mpt3sas0-msix61: PCI-MSI-X enabled: IRQ 184 [ 3.754763] mpt3sas0-msix62: PCI-MSI-X enabled: IRQ 185 [ 3.754764] mpt3sas0-msix63: PCI-MSI-X enabled: IRQ 186 [ 3.754764] mpt3sas0-msix64: PCI-MSI-X enabled: IRQ 187 [ 3.754765] mpt3sas0-msix65: PCI-MSI-X enabled: IRQ 188 [ 3.754765] mpt3sas0-msix66: PCI-MSI-X enabled: IRQ 189 [ 3.754766] mpt3sas0-msix67: PCI-MSI-X enabled: IRQ 190 [ 3.754766] mpt3sas0-msix68: PCI-MSI-X enabled: IRQ 191 [ 3.754767] mpt3sas0-msix69: PCI-MSI-X enabled: IRQ 192 [ 3.754768] mpt3sas0-msix70: PCI-MSI-X enabled: IRQ 193 [ 3.754768] mpt3sas0-msix71: PCI-MSI-X enabled: IRQ 194 [ 3.754769] mpt3sas0-msix72: PCI-MSI-X enabled: IRQ 195 [ 3.754769] mpt3sas0-msix73: PCI-MSI-X enabled: IRQ 196 [ 3.754770] mpt3sas0-msix74: PCI-MSI-X enabled: IRQ 197 [ 3.754770] mpt3sas0-msix75: PCI-MSI-X enabled: IRQ 198 [ 3.754771] mpt3sas0-msix76: PCI-MSI-X enabled: IRQ 199 [ 3.754772] mpt3sas0-msix77: PCI-MSI-X enabled: IRQ 200 [ 3.754772] mpt3sas0-msix78: PCI-MSI-X enabled: IRQ 201 [ 3.754773] mpt3sas0-msix79: PCI-MSI-X enabled: IRQ 202 [ 3.754773] mpt3sas0-msix80: PCI-MSI-X enabled: IRQ 203 [ 3.754774] mpt3sas0-msix81: PCI-MSI-X enabled: IRQ 204 [ 3.754775] mpt3sas0-msix82: PCI-MSI-X enabled: IRQ 205 [ 3.754775] mpt3sas0-msix83: PCI-MSI-X enabled: IRQ 206 [ 3.754776] mpt3sas0-msix84: PCI-MSI-X enabled: IRQ 207 [ 3.754776] mpt3sas0-msix85: PCI-MSI-X enabled: IRQ 208 [ 3.754777] mpt3sas0-msix86: PCI-MSI-X enabled: IRQ 209 [ 3.754778] mpt3sas0-msix87: PCI-MSI-X enabled: IRQ 210 [ 3.754778] mpt3sas0-msix88: PCI-MSI-X enabled: IRQ 211 [ 3.754779] mpt3sas0-msix89: PCI-MSI-X enabled: IRQ 212 [ 3.754780] mpt3sas0-msix90: PCI-MSI-X enabled: IRQ 213 [ 3.754780] mpt3sas0-msix91: PCI-MSI-X enabled: IRQ 214 [ 3.754781] mpt3sas0-msix92: PCI-MSI-X enabled: IRQ 215 [ 3.754781] mpt3sas0-msix93: PCI-MSI-X enabled: IRQ 216 [ 3.754782] mpt3sas0-msix94: PCI-MSI-X enabled: IRQ 217 [ 3.754783] mpt3sas0-msix95: PCI-MSI-X enabled: IRQ 218 [ 3.754784] mpt3sas_cm0: iomem(0x000620c180100000), mapped(0x000000001f166f57), size(65536) [ 3.754785] mpt3sas_cm0: ioport(0x0000000000000000), size(0) [ 3.791747] qla2xxx [0030:01:00.0]-0075:2: ZIO mode 6 enabled; timer delay (200 us). [ 3.808315] usb 1-3.1: New USB device found, idVendor=0557, idProduct=2419 [ 3.808316] usb 1-3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.808929] mpt3sas_cm0: CurrentHostPageSize is 0: Setting default host page size to 4k [ 3.817893] hidraw: raw HID events driver (C) Jiri Kosina [ 3.827892] usbcore: registered new interface driver usbhid [ 3.827892] usbhid: USB HID core driver [ 3.875425] mpt3sas_cm0: Allocated physical memory: size(25736 kB) [ 3.875427] mpt3sas_cm0: Current Controller Queue Depth(6448),Max Controller Queue Depth(6464) [ 3.875427] mpt3sas_cm0: Scatter Gather Elements per IO(128) [ 3.882882] ixgbe 0031:01:00.0: Multiqueue Enabled: Rx Queue count = 63, Tx Queue count = 63 XDP Queue count = 0 [ 3.883016] ixgbe 0031:01:00.0: PCI Express bandwidth of 32GT/s available [ 3.883017] ixgbe 0031:01:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%) [ 3.883101] ixgbe 0031:01:00.0: MAC: 2, PHY: 15, SFP+: 7, PBA No: 0210FF-0FF [ 3.883103] ixgbe 0031:01:00.0: 0c:c4:7a:eb:15:22 [ 3.887770] ixgbe 0031:01:00.0: Intel(R) 10 Gigabit Network Connection [ 3.919066] AAC0: kernel 2.99-0[16] Apr 13 2017 [ 3.919067] AAC0: monitor 0.0-0[0] [ 3.919068] AAC0: bios 0.13-209[32000] [ 3.919069] AAC0: serial 10F447 [ 3.919070] AAC0: Non-DASD support enabled. [ 3.919071] AAC0: 64bit support enabled. [ 3.919074] aacraid 0003:01:00.0: Using 64-bit DMA iommu bypass [ 3.919077] aacraid 0003:01:00.0: 64 Bit DAC enabled [ 3.919414] i40e 0002:01:00.0: MAC address: ac:1f:6b:09:a3:da [ 3.922678] mpt3sas_cm0: LSISAS3216: FWVersion(09.00.100.00), ChipRevision(0x01), BiosVersion(00.00.00.00) [ 3.922679] mpt3sas_cm0: Protocol=( [ 3.922680] Initiator [ 3.922681] ,Target [ 3.922681] ), [ 3.922682] Capabilities=( [ 3.922682] TLR [ 3.922683] ,EEDP [ 3.922683] ,Snapshot Buffer [ 3.922684] ,Diag Trace Buffer [ 3.922684] ,Task Set Full [ 3.922684] ,NCQ [ 3.922685] ) [ 3.922731] scsi host1: Fusion MPT SAS Host [ 3.924090] mpt3sas_cm0: sending port enable !! [ 3.928611] mpt3sas_cm0: host_add: handle(0x0001), sas_addr(0x500062b200f0abe0), phys(16) [ 3.929488] mpt3sas_cm0: expander_add: handle(0x0011), parent(0x0009), sas_addr(0x500507604541cf8c), phys(39) [ 3.937248] scsi 1:0:0:0: Direct-Access IBM ST9146852SS CA06 PQ: 0 ANSI: 6 [ 3.937254] scsi 1:0:0:0: SSP: handle(0x0013), sas_addr(0x5000c5003a9d91f2), phy(2), device_name(0x5000c5003a9d91f0) [ 3.937256] scsi 1:0:0:0: enclosure logical id (0x500507604541cf5c), slot(2) [ 3.937258] scsi 1:0:0:0: enclosure level(0x0000), connector name( ) [ 3.939920] i40e 0002:01:00.0 eth1: NIC Link is Up, 1000 Mbps Full Duplex, Flow Control: None [ 3.940627] scsi 1:0:1:0: Direct-Access IBM ST9146852SS CA06 PQ: 0 ANSI: 6 [ 3.940631] scsi 1:0:1:0: SSP: handle(0x0014), sas_addr(0x5000c5003a9a53d2), phy(3), device_name(0x5000c5003a9a53d0) [ 3.940633] scsi 1:0:1:0: enclosure logical id (0x500507604541cf5c), slot(3) [ 3.940635] scsi 1:0:1:0: enclosure level(0x0000), connector name( ) [ 3.943748] scsi 1:0:2:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 3.943752] scsi 1:0:2:0: SSP: handle(0x0015), sas_addr(0x5000c500765676ea), phy(4), device_name(0x5000c500765676e8) [ 3.943754] scsi 1:0:2:0: enclosure logical id (0x500507604541cf5c), slot(4) [ 3.943756] scsi 1:0:2:0: enclosure level(0x0000), connector name( ) [ 3.944099] scsi host0: aacraid [ 3.946279] scsi 1:0:3:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 3.946283] scsi 1:0:3:0: SSP: handle(0x0016), sas_addr(0x5000c5007655f16e), phy(5), device_name(0x5000c5007655f16c) [ 3.946284] scsi 1:0:3:0: enclosure logical id (0x500507604541cf5c), slot(5) [ 3.946286] scsi 1:0:3:0: enclosure level(0x0000), connector name( ) [ 3.948798] scsi 1:0:4:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 3.948802] scsi 1:0:4:0: SSP: handle(0x0017), sas_addr(0x5000c50076568a6a), phy(6), device_name(0x5000c50076568a68) [ 3.948804] scsi 1:0:4:0: enclosure logical id (0x500507604541cf5c), slot(6) [ 3.948806] scsi 1:0:4:0: enclosure level(0x0000), connector name( ) [ 3.950295] i40e 0002:01:00.0: PCI-Express: Speed 8.0GT/s Width x8 [ 3.951571] scsi 1:0:5:0: Direct-Access IBM ST9146852SS CA08 PQ: 0 ANSI: 6 [ 3.951575] scsi 1:0:5:0: SSP: handle(0x0018), sas_addr(0x5000c5003aaeb4e2), phy(7), device_name(0x5000c5003aaeb4e0) [ 3.951577] scsi 1:0:5:0: enclosure logical id (0x500507604541cf5c), slot(7) [ 3.951579] scsi 1:0:5:0: enclosure level(0x0000), connector name( ) [ 3.954737] scsi 1:0:6:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 3.954740] scsi 1:0:6:0: SSP: handle(0x001f), sas_addr(0x5000c5007655fa0a), phy(8), device_name(0x5000c5007655fa08) [ 3.954742] scsi 1:0:6:0: enclosure logical id (0x500507604541cf5c), slot(8) [ 3.954744] scsi 1:0:6:0: enclosure level(0x0000), connector name( ) [ 3.957243] scsi 1:0:7:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 3.957247] scsi 1:0:7:0: SSP: handle(0x0020), sas_addr(0x5000c5007656882a), phy(9), device_name(0x5000c50076568828) [ 3.957248] scsi 1:0:7:0: enclosure logical id (0x500507604541cf5c), slot(9) [ 3.957250] scsi 1:0:7:0: enclosure level(0x0000), connector name( ) [ 3.959822] scsi 1:0:8:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 3.959826] scsi 1:0:8:0: SSP: handle(0x0021), sas_addr(0x5000c50076564662), phy(10), device_name(0x5000c50076564660) [ 3.959828] scsi 1:0:8:0: enclosure logical id (0x500507604541cf5c), slot(10) [ 3.959830] scsi 1:0:8:0: enclosure level(0x0000), connector name( ) [ 3.962019] [drm] platform has no IO space, trying MMIO [ 3.962029] [drm] Using P2A bridge for configuration [ 3.962032] [drm] AST 2500 detected [ 3.962037] [drm] Analog VGA only [ 3.962046] [drm] dram MCLK=800 Mhz type=7 bus_width=16 size=01000000 [ 3.962092] i40e 0002:01:00.1: enabling device (0140 -> 0142) [ 3.962100] i40e 0002:01:00.1: Using 64-bit DMA iommu bypass [ 3.962559] scsi 1:0:9:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 3.962564] scsi 1:0:9:0: SSP: handle(0x0022), sas_addr(0x5000c500764df52a), phy(11), device_name(0x5000c500764df528) [ 3.962566] scsi 1:0:9:0: enclosure logical id (0x500507604541cf5c), slot(11) [ 3.962568] scsi 1:0:9:0: enclosure level(0x0000), connector name( ) [ 3.962945] [TTM] Zone kernel: Available graphics memory: 66885696 kiB [ 3.962946] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.962947] [TTM] Initializing pool allocator [ 3.962950] [TTM] Initializing DMA pool allocator [ 3.965485] scsi 1:0:10:0: Enclosure IBM 588750B0 54YG PQ: 0 ANSI: 4 [ 3.965489] scsi 1:0:10:0: set ignore_delay_remove for handle(0x0027) [ 3.965491] scsi 1:0:10:0: SES: handle(0x0027), sas_addr(0x500507604541cfb3), phy(38), device_name(0x0000000000000000) [ 3.965493] scsi 1:0:10:0: enclosure logical id (0x500507604541cf5c), slot(0) [ 3.965495] scsi 1:0:10:0: enclosure level(0x0000), connector name( ) [ 3.965806] checking generic (600c200010000 300000) vs hw (600c200000000 1000000) [ 3.965807] fb: switching to astdrmfb from OFfb vga [ 3.965828] Console: switching to colour dummy device 80x25 [ 3.966719] mpt3sas_cm0: expander_add: handle(0x0012), parent(0x000a), sas_addr(0x500507604541cf5c), phys(39) [ 3.984664] i40e 0002:01:00.1: fw 5.1.40981 api 1.5 nvm 5.05 0x800029e1 1.1313.0 [ 3.990420] scsi 1:0:11:0: Direct-Access IBM ST9146852SS CA06 PQ: 0 ANSI: 6 [ 3.990425] scsi 1:0:11:0: SSP: handle(0x0019), sas_addr(0x5000c5003a9d91f1), phy(2), device_name(0x5000c5003a9d91f0) [ 3.990427] scsi 1:0:11:0: enclosure logical id (0x500507604541cf5c), slot(2) [ 3.990429] scsi 1:0:11:0: enclosure level(0x0000), connector name( ) [ 3.993745] scsi 1:0:12:0: Direct-Access IBM ST9146852SS CA06 PQ: 0 ANSI: 6 [ 3.993749] scsi 1:0:12:0: SSP: handle(0x001a), sas_addr(0x5000c5003a9a53d1), phy(3), device_name(0x5000c5003a9a53d0) [ 3.993751] scsi 1:0:12:0: enclosure logical id (0x500507604541cf5c), slot(3) [ 3.993753] scsi 1:0:12:0: enclosure level(0x0000), connector name( ) [ 3.996835] scsi 1:0:13:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 3.996839] scsi 1:0:13:0: SSP: handle(0x001b), sas_addr(0x5000c500765676e9), phy(4), device_name(0x5000c500765676e8) [ 3.996840] scsi 1:0:13:0: enclosure logical id (0x500507604541cf5c), slot(4) [ 3.996842] scsi 1:0:13:0: enclosure level(0x0000), connector name( ) [ 3.999334] scsi 1:0:14:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 3.999338] scsi 1:0:14:0: SSP: handle(0x001c), sas_addr(0x5000c5007655f16d), phy(5), device_name(0x5000c5007655f16c) [ 3.999340] scsi 1:0:14:0: enclosure logical id (0x500507604541cf5c), slot(5) [ 3.999342] scsi 1:0:14:0: enclosure level(0x0000), connector name( ) [ 4.001800] scsi 1:0:15:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 4.001804] scsi 1:0:15:0: SSP: handle(0x001d), sas_addr(0x5000c50076568a69), phy(6), device_name(0x5000c50076568a68) [ 4.001806] scsi 1:0:15:0: enclosure logical id (0x500507604541cf5c), slot(6) [ 4.001808] scsi 1:0:15:0: enclosure level(0x0000), connector name( ) [ 4.004614] scsi 1:0:16:0: Direct-Access IBM ST9146852SS CA08 PQ: 0 ANSI: 6 [ 4.004618] scsi 1:0:16:0: SSP: handle(0x001e), sas_addr(0x5000c5003aaeb4e1), phy(7), device_name(0x5000c5003aaeb4e0) [ 4.004620] scsi 1:0:16:0: enclosure logical id (0x500507604541cf5c), slot(7) [ 4.004621] scsi 1:0:16:0: enclosure level(0x0000), connector name( ) [ 4.007686] scsi 1:0:17:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 4.007690] scsi 1:0:17:0: SSP: handle(0x0023), sas_addr(0x5000c5007655fa09), phy(8), device_name(0x5000c5007655fa08) [ 4.007692] scsi 1:0:17:0: enclosure logical id (0x500507604541cf5c), slot(8) [ 4.007694] scsi 1:0:17:0: enclosure level(0x0000), connector name( ) [ 4.010132] scsi 1:0:18:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 4.010136] scsi 1:0:18:0: SSP: handle(0x0024), sas_addr(0x5000c50076568829), phy(9), device_name(0x5000c50076568828) [ 4.010138] scsi 1:0:18:0: enclosure logical id (0x500507604541cf5c), slot(9) [ 4.010140] scsi 1:0:18:0: enclosure level(0x0000), connector name( ) [ 4.012713] scsi 1:0:19:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 4.012717] scsi 1:0:19:0: SSP: handle(0x0025), sas_addr(0x5000c50076564661), phy(10), device_name(0x5000c50076564660) [ 4.012719] scsi 1:0:19:0: enclosure logical id (0x500507604541cf5c), slot(10) [ 4.012721] scsi 1:0:19:0: enclosure level(0x0000), connector name( ) [ 4.015256] scsi 1:0:20:0: Direct-Access IBM ST300MP0064 7D0E PQ: 0 ANSI: 6 [ 4.015261] scsi 1:0:20:0: SSP: handle(0x0026), sas_addr(0x5000c500764df529), phy(11), device_name(0x5000c500764df528) [ 4.015263] scsi 1:0:20:0: enclosure logical id (0x500507604541cf5c), slot(11) [ 4.015264] scsi 1:0:20:0: enclosure level(0x0000), connector name( ) [ 4.017995] scsi 1:0:21:0: Enclosure IBM 588750B0 54YG PQ: 0 ANSI: 4 [ 4.017999] scsi 1:0:21:0: set ignore_delay_remove for handle(0x0028) [ 4.018001] scsi 1:0:21:0: SES: handle(0x0028), sas_addr(0x500507604541cf83), phy(38), device_name(0x0000000000000000) [ 4.018003] scsi 1:0:21:0: enclosure logical id (0x500507604541cf5c), slot(0) [ 4.018005] scsi 1:0:21:0: enclosure level(0x0000), connector name( ) [ 4.024071] mpt3sas_cm0: port enable: SUCCESS [ 4.024515] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 4.024836] sd 1:0:1:0: Attached scsi generic sg1 type 0 [ 4.025144] sd 1:0:2:0: Attached scsi generic sg2 type 0 [ 4.025483] sd 1:0:3:0: Attached scsi generic sg3 type 0 [ 4.025801] sd 1:0:4:0: Attached scsi generic sg4 type 0 [ 4.026099] sd 1:0:5:0: Attached scsi generic sg5 type 0 [ 4.026380] sd 1:0:6:0: Attached scsi generic sg6 type 0 [ 4.026589] sd 1:0:7:0: Attached scsi generic sg7 type 0 [ 4.026801] sd 1:0:5:0: [sdf] Unsupported sector size 528. [ 4.026890] sd 1:0:8:0: Attached scsi generic sg8 type 0 [ 4.027118] sd 1:0:9:0: Attached scsi generic sg9 type 0 [ 4.027364] scsi 1:0:10:0: Attached scsi generic sg10 type 13 [ 4.027670] sd 1:0:11:0: Attached scsi generic sg11 type 0 [ 4.027928] sd 1:0:12:0: Attached scsi generic sg12 type 0 [ 4.027940] sd 1:0:0:0: [sda] 286748000 512-byte logical blocks: (147 GB/137 GiB) [ 4.028219] sd 1:0:13:0: Attached scsi generic sg13 type 0 [ 4.028453] sd 1:0:14:0: Attached scsi generic sg14 type 0 [ 4.028585] sd 1:0:3:0: [sdd] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.028628] sd 1:0:1:0: [sdb] 286748000 512-byte logical blocks: (147 GB/137 GiB) [ 4.028694] sd 1:0:5:0: [sdf] 0 512-byte logical blocks: (0 B/0 B) [ 4.028695] sd 1:0:5:0: [sdf] 528-byte physical blocks [ 4.028715] sd 1:0:15:0: Attached scsi generic sg15 type 0 [ 4.028760] sd 1:0:2:0: [sdc] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.029085] sd 1:0:16:0: Attached scsi generic sg16 type 0 [ 4.029178] sd 1:0:2:0: [sdc] Write Protect is off [ 4.029179] sd 1:0:0:0: [sda] Write Protect is off [ 4.029181] sd 1:0:2:0: [sdc] Mode Sense: e1 00 10 08 [ 4.029182] sd 1:0:0:0: [sda] Mode Sense: c5 00 10 08 [ 4.029391] sd 1:0:3:0: [sdd] Write Protect is off [ 4.029393] sd 1:0:3:0: [sdd] Mode Sense: e1 00 10 08 [ 4.029401] sd 1:0:17:0: Attached scsi generic sg17 type 0 [ 4.029405] sd 1:0:1:0: [sdb] Write Protect is off [ 4.029407] sd 1:0:1:0: [sdb] Mode Sense: c5 00 10 08 [ 4.029693] sd 1:0:18:0: Attached scsi generic sg18 type 0 [ 4.029948] sd 1:0:19:0: Attached scsi generic sg19 type 0 [ 4.029953] sd 1:0:5:0: [sdf] Write Protect is off [ 4.029955] sd 1:0:5:0: [sdf] Mode Sense: c5 00 10 08 [ 4.030085] sd 1:0:6:0: [sdg] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.030232] sd 1:0:4:0: [sde] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.030234] sd 1:0:20:0: Attached scsi generic sg20 type 0 [ 4.030361] sd 1:0:7:0: [sdh] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.030425] scsi 1:0:21:0: Attached scsi generic sg21 type 13 [ 4.030846] sd 1:0:16:0: [sdp] Unsupported sector size 528. [ 4.030986] sd 1:0:6:0: [sdg] Write Protect is off [ 4.030989] sd 1:0:6:0: [sdg] Mode Sense: e1 00 10 08 [ 4.031026] sd 1:0:7:0: [sdh] Write Protect is off [ 4.031027] sd 1:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.031028] sd 1:0:7:0: [sdh] Mode Sense: e1 00 10 08 [ 4.031085] sd 1:0:4:0: [sde] Write Protect is off [ 4.031087] sd 1:0:4:0: [sde] Mode Sense: e1 00 10 08 [ 4.031255] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.031256] sd 1:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.031262] sd 1:0:9:0: [sdj] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.031370] sd 1:0:11:0: [sdk] 286748000 512-byte logical blocks: (147 GB/137 GiB) [ 4.031787] sd 1:0:8:0: [sdi] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.032135] sd 1:0:5:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.032145] sd 1:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.032269] sd 1:0:9:0: [sdj] Write Protect is off [ 4.032271] sd 1:0:12:0: [sdl] 286748000 512-byte logical blocks: (147 GB/137 GiB) [ 4.032272] sd 1:0:9:0: [sdj] Mode Sense: e1 00 10 08 [ 4.032311] sd 1:0:11:0: [sdk] Write Protect is off [ 4.032312] sd 1:0:11:0: [sdk] Mode Sense: c5 00 10 08 [ 4.032469] sd 1:0:7:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.032774] sd 1:0:6:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.033231] sd 1:0:17:0: [sdq] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.033232] sd 1:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.033341] sd 1:0:12:0: [sdl] Write Protect is off [ 4.033342] sd 1:0:8:0: [sdi] Write Protect is off [ 4.033343] sd 1:0:12:0: [sdl] Mode Sense: c5 00 10 08 [ 4.033344] sd 1:0:16:0: [sdp] 0 512-byte logical blocks: (0 B/0 B) [ 4.033345] sd 1:0:8:0: [sdi] Mode Sense: e1 00 10 08 [ 4.033346] sd 1:0:16:0: [sdp] 528-byte physical blocks [ 4.033780] sd 1:0:9:0: [sdj] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.033785] sd 1:0:20:0: [sdt] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.034058] sd 1:0:13:0: [sdm] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.034384] sd 1:0:16:0: [sdp] Write Protect is off [ 4.034387] sd 1:0:16:0: [sdp] Mode Sense: c5 00 10 08 [ 4.034421] sd 1:0:17:0: [sdq] Write Protect is off [ 4.034423] sd 1:0:17:0: [sdq] Mode Sense: e1 00 10 08 [ 4.034913] sd 1:0:13:0: [sdm] Write Protect is off [ 4.034915] sd 1:0:13:0: [sdm] Mode Sense: e1 00 10 08 [ 4.034983] sd 1:0:11:0: [sdk] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.034988] sd 1:0:19:0: [sds] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.035054] sd 1:0:12:0: [sdl] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.035055] sd 1:0:8:0: [sdi] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.035060] sd 1:0:20:0: [sdt] Write Protect is off [ 4.035062] sd 1:0:20:0: [sdt] Mode Sense: e1 00 10 08 [ 4.035198] sd 1:0:14:0: [sdn] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.035301] sd 1:0:19:0: [sds] Write Protect is off [ 4.035303] sd 1:0:19:0: [sds] Mode Sense: e1 00 10 08 [ 4.035540] sd 1:0:15:0: [sdo] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.035940] sd 1:0:18:0: [sdr] 73242188 4096-byte logical blocks: (300 GB/279 GiB) [ 4.035969] sd 1:0:14:0: [sdn] Write Protect is off [ 4.035970] sd 1:0:16:0: [sdp] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.035971] sd 1:0:14:0: [sdn] Mode Sense: e1 00 10 08 [ 4.036232] sd 1:0:17:0: [sdq] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.036256] sd 1:0:19:0: [sds] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.036536] sd 1:0:13:0: [sdm] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.036653] sd 1:0:15:0: [sdo] Write Protect is off [ 4.036654] sd 1:0:15:0: [sdo] Mode Sense: e1 00 10 08 [ 4.037306] sd 1:0:20:0: [sdt] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.037507] sd 1:0:18:0: [sdr] Write Protect is off [ 4.037509] sd 1:0:18:0: [sdr] Mode Sense: e1 00 10 08 [ 4.037725] sd 1:0:5:0: [sdf] Unsupported sector size 528. [ 4.037911] sd 1:0:14:0: [sdn] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.038426] sd 1:0:15:0: [sdo] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.039172] ses 1:0:10:0: Attached Enclosure device [ 4.039196] ses 1:0:21:0: Attached Enclosure device [ 4.039478] random: crng init done [ 4.039590] sd 1:0:18:0: [sdr] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.042363] sdd: sdd1 sdd2 sdd3 sdd4 [ 4.042830] sd 1:0:16:0: [sdp] Unsupported sector size 528. [ 4.044698] sdg: sdg1 [ 4.044700] sdh: sdh1 [ 4.044701] sdc: sdc1 sdc2 sdc3 sdc4 < > [ 4.044702] sdc: partition table partially beyond EOD, enabling native capacity [ 4.045438] sde: sde1 [ 4.045759] sdj: sdj1 sdj2 [ 4.047503] sdi: sdi1 [ 4.047845] sd 1:0:5:0: [sdf] Attached SCSI disk [ 4.048440] sdq: sdq1 [ 4.048573] sdn: sdn1 sdn2 sdn3 sdn4 [ 4.049413] sds: sds1 [ 4.049486] sdm: sdm1 sdm2 sdm3 sdm4 < > [ 4.049487] sdm: partition table partially beyond EOD, enabling native capacity [ 4.051013] sd 1:0:7:0: [sdh] Attached SCSI disk [ 4.051145] sd 1:0:9:0: [sdj] Attached SCSI disk [ 4.051480] sdo: sdo1 [ 4.052465] sd 1:0:16:0: [sdp] Attached SCSI disk [ 4.052468] sdr: sdr1 [ 4.052581] sd 1:0:8:0: [sdi] Attached SCSI disk [ 4.053023] sdt: sdt1 sdt2 [ 4.053173] sd 1:0:3:0: [sdd] Attached SCSI disk [ 4.053935] sd 1:0:4:0: [sde] Attached SCSI disk [ 4.055434] sd 1:0:14:0: [sdn] Attached SCSI disk [ 4.055557] sd 1:0:6:0: [sdg] Attached SCSI disk [ 4.055710] sda: [ 4.057522] sdm: sdm1 sdm2 sdm3 sdm4 < > [ 4.057523] sdm: partition table partially beyond EOD, truncated [ 4.057732] sdm: p2 size 468746240 extends beyond EOD, truncated [ 4.057930] sdm: p3 start 937492480 is beyond EOD, truncated [ 4.057931] sdm: p4 start 1406255104 is beyond EOD, truncated [ 4.058072] sdc: sdc1 sdc2 sdc3 sdc4 < > [ 4.058073] sdc: partition table partially beyond EOD, truncated [ 4.058379] sd 1:0:17:0: [sdq] Attached SCSI disk [ 4.058457] sdc: p2 size 468746240 extends beyond EOD, truncated [ 4.058596] sd 1:0:15:0: [sdo] Attached SCSI disk [ 4.058643] sdc: p3 start 937492480 is beyond EOD, truncated [ 4.058644] sdc: p4 start 1406255104 is beyond EOD, truncated [ 4.058651] sd 1:0:18:0: [sdr] Attached SCSI disk [ 4.061228] sd 1:0:19:0: [sds] Attached SCSI disk [ 4.061388] sdk: [ 4.066198] sd 1:0:0:0: [sda] Attached SCSI disk [ 4.066605] sdl: sdl1 sdl2 [ 4.067470] sdb: sdb1 sdb2 [ 4.068544] sd 1:0:2:0: [sdc] Attached SCSI disk [ 4.068727] sd 1:0:13:0: [sdm] Attached SCSI disk [ 4.074050] sd 1:0:20:0: [sdt] Attached SCSI disk [ 4.078251] sd 1:0:1:0: [sdb] Attached SCSI disk [ 4.078765] sd 1:0:12:0: [sdl] Attached SCSI disk [ 4.093938] sd 1:0:11:0: [sdk] Attached SCSI disk [ 4.228348] Console: switching to colour frame buffer device 128x48 [ 4.240852] ast 0004:02:00.0: fb0: astdrmfb frame buffer device [ 4.241270] scsi 0:2:0:0: Direct-Access SEAGATE ST2000NM0045 N003 PQ: 0 ANSI: 6 [ 4.241561] i40e 0002:01:00.1: MAC address: ac:1f:6b:09:a3:db [ 4.242879] sd 0:2:0:0: Attached scsi generic sg22 type 0 [ 4.243563] scsi 0:2:1:0: Direct-Access ATA HGST HUS726060AL W517 PQ: 0 ANSI: 6 [ 4.244202] sd 0:2:1:0: Attached scsi generic sg23 type 0 [ 4.244760] sd 0:2:0:0: [sdu] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 4.245074] sd 0:2:1:0: [sdv] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB) [ 4.245076] sd 0:2:1:0: [sdv] 4096-byte physical blocks [ 4.245235] sd 0:2:1:0: [sdv] Write Protect is off [ 4.245237] sd 0:2:1:0: [sdv] Mode Sense: 46 00 10 08 [ 4.245333] scsi 0:3:123:0: Enclosure ADAPTEC Smart Adapter 2.99 PQ: 0 ANSI: 5 [ 4.245557] sd 0:2:1:0: [sdv] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.245681] ses 0:3:123:0: Attached Enclosure device [ 4.245786] sd 0:2:0:0: [sdu] Write Protect is off [ 4.245788] sd 0:2:0:0: [sdu] Mode Sense: db 00 10 08 [ 4.245843] ses 0:3:123:0: Attached scsi generic sg24 type 13 [ 4.247604] sd 0:2:0:0: [sdu] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 4.249003] sdv: [ 4.250524] sd 0:2:1:0: [sdv] Attached SCSI disk [ 4.252525] i40e 0002:01:00.1: PCI-Express: Speed 8.0GT/s Width x8 [ 4.253118] i40e 0002:01:00.2: enabling device (0140 -> 0142) [ 4.253125] i40e 0002:01:00.2: Using 64-bit DMA iommu bypass [ 4.253532] sdu: sdu1 sdu2 [ 4.258472] sd 0:2:0:0: [sdu] Attached SCSI disk [ 4.266145] i40e 0002:01:00.2: fw 5.1.40981 api 1.5 nvm 5.05 0x800029e1 1.1313.0 [ 4.507808] i40e 0002:01:00.2: MAC address: ac:1f:6b:09:a3:dc [ 4.516021] [drm] Initialized ast 0.1.0 20120228 for 0004:02:00.0 on minor 0 [ 4.517123] i40e 0002:01:00.2: PCI-Express: Speed 8.0GT/s Width x8 [ 4.517707] i40e 0002:01:00.3: enabling device (0140 -> 0142) [ 4.517713] i40e 0002:01:00.3: Using 64-bit DMA iommu bypass [ 4.531010] i40e 0002:01:00.3: fw 5.1.40981 api 1.5 nvm 5.05 0x800029e1 1.1313.0 [ 4.769045] ixgbe 0031:01:00.1: enabling device (0140 -> 0142) [ 4.769051] ixgbe 0031:01:00.1: Using 64-bit DMA iommu bypass [ 4.772556] i40e 0002:01:00.3: MAC address: ac:1f:6b:09:a3:dd [ 4.781935] i40e 0002:01:00.3: PCI-Express: Speed 8.0GT/s Width x8 [ 4.783439] i40e 0002:01:00.0 enP2p1s0f0: renamed from eth1 [ 4.928199] i40e 0002:01:00.1 enP2p1s0f1: renamed from eth2 [ 4.948822] ixgbe 0031:01:00.1: Multiqueue Enabled: Rx Queue count = 63, Tx Queue count = 63 XDP Queue count = 0 [ 4.948954] ixgbe 0031:01:00.1: PCI Express bandwidth of 32GT/s available [ 4.948956] ixgbe 0031:01:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%) [ 4.949040] ixgbe 0031:01:00.1: MAC: 2, PHY: 16, SFP+: 6, PBA No: 0210FF-0FF [ 4.949041] ixgbe 0031:01:00.1: 0c:c4:7a:eb:15:23 [ 5.043983] i40e 0002:01:00.3 enP2p1s0f3: renamed from eth4 [ 5.135930] i40e 0002:01:00.2 enP2p1s0f2: renamed from eth3 [ 5.163332] ixgbe 0031:01:00.1: Intel(R) 10 Gigabit Network Connection [ 5.165639] ixgbe 0031:01:00.0 enP49p1s0f0: renamed from eth0 [ 5.211896] ixgbe 0031:01:00.1 enP49p1s0f1: renamed from eth1 [ 5.658966] scsi host2: qla2xxx [ 5.661557] qla2xxx [0030:01:00.0]-00fb:2: QLogic QLE2692 - QLogic 16Gb 2-port FC to PCIe Gen3 x8 Adapter. [ 5.661565] qla2xxx [0030:01:00.0]-00fc:2: ISP2261: PCIe (8.0GT/s x8) @ 0030:01:00.0 hdma+ host#=2 fw=8.03.07 (d0d5). [ 5.662432] qla2xxx 0030:01:00.1: enabling device (0140 -> 0142) [ 5.662467] qla2xxx [0030:01:00.1]-011c: : MSI-X vector count: 16. [ 5.662469] qla2xxx [0030:01:00.1]-001d: : Found an ISP2261 irq 41 iobase 0x00000000ba4e212f. [ 5.662471] qla2xxx 0030:01:00.1: Using 64-bit DMA iommu bypass [ 5.744081] qla2xxx [0030:01:00.1]-0075:3: ZIO mode 6 enabled; timer delay (200 us). [ 7.539543] scsi host3: qla2xxx [ 7.542829] qla2xxx [0030:01:00.1]-00fb:3: QLogic QLE2692 - QLogic 16Gb 2-port FC to PCIe Gen3 x8 Adapter. [ 7.542835] qla2xxx [0030:01:00.1]-00fc:3: ISP2261: PCIe (8.0GT/s x8) @ 0030:01:00.1 hdma+ host#=3 fw=8.03.07 (d0d5). [ 7.607751] raid6: altivecx1 gen() 6822 MB/s [ 7.655744] raid6: altivecx2 gen() 11965 MB/s [ 7.703747] raid6: altivecx4 gen() 13490 MB/s [ 7.751747] raid6: altivecx8 gen() 12166 MB/s [ 7.799746] raid6: int64x1 gen() 4424 MB/s [ 7.847760] raid6: int64x1 xor() 1678 MB/s [ 7.895746] raid6: int64x2 gen() 7715 MB/s [ 7.943748] raid6: int64x2 xor() 2989 MB/s [ 7.991748] raid6: int64x4 gen() 9329 MB/s [ 8.039742] raid6: int64x4 xor() 3542 MB/s [ 8.087750] raid6: int64x8 gen() 5497 MB/s [ 8.135750] raid6: int64x8 xor() 2239 MB/s [ 8.135751] raid6: using algorithm altivecx4 gen() 13490 MB/s [ 8.135752] raid6: using intx1 recovery algorithm [ 8.139034] xor: measuring software checksum speed [ 8.175739] 8regs : 15792.000 MB/sec [ 8.215741] 8regs_prefetch: 13152.000 MB/sec [ 8.255734] 32regs : 15984.000 MB/sec [ 8.295740] 32regs_prefetch: 14144.000 MB/sec [ 8.335740] altivec : 18416.000 MB/sec [ 8.335741] xor: using function: altivec (18416.000 MB/sec) [ 8.373862] Btrfs loaded, crc32c=crc32c-vpmsum [ 8.602585] EXT4-fs (sdt2): mounted filesystem with ordered data mode. Opts: (null) [ 8.746158] qla2xxx [0030:01:00.1]-500a:3: LOOP UP detected (8 Gbps). [ 9.008881] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.016168] pstore: decompression failed: -5 [ 9.040168] systemd[1]: Detected architecture ppc64-le. [ 9.042078] systemd[1]: Set hostname to . [ 9.577759] systemd[1]: Reached target User and Group Name Lookups. [ 9.577834] systemd[1]: Reached target System Time Synchronized. [ 9.578068] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 9.578270] systemd[1]: Created slice User and Session Slice. [ 9.578316] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 9.578470] systemd[1]: Created slice System Slice. [ 9.649438] EXT4-fs (sdt2): re-mounted. Opts: errors=remount-ro [ 9.844049] RPC: Registered named UNIX socket transport module. [ 9.844052] RPC: Registered udp transport module. [ 9.844052] RPC: Registered tcp transport module. [ 9.844053] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.899480] synth uevent: /devices/vio: failed to send uevent [ 9.899482] vio vio: uevent: failed to send synthetic uevent [ 9.986488] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 10.021084] Adding 2097088k swap on /swapfile. Priority:-2 extents:6 across:2260928k FS [ 10.103804] systemd-journald[1762]: Received request to flush runtime journal from PID 1 [ 10.508495] ipmi message handler version 39.2 [ 10.517194] ipmi device interface [ 10.519861] ipmi-powernv ibm,opal:ipmi: Found new BMC (man_id: 0x002a7c, prod_id: 0x0985, dev_id: 0x20) [ 10.526788] crypto_register_alg 'aes' = 0 [ 10.526870] crypto_register_alg 'cbc(aes)' = 0 [ 10.526953] crypto_register_alg 'ctr(aes)' = 0 [ 10.527002] crypto_register_alg 'xts(aes)' = 0 [ 10.730494] at24 0-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write [ 10.730722] at24 1-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write [ 10.772707] at24 3-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write [ 10.772947] at24 4-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 10.779804] at24 5-0052: 256 byte spd EEPROM, read-only, 0 bytes/write [ 10.780075] at24 5-0053: 256 byte spd EEPROM, read-only, 0 bytes/write [ 10.780290] at24 6-0052: 256 byte spd EEPROM, read-only, 0 bytes/write [ 10.780478] at24 6-0054: 256 byte spd EEPROM, read-only, 0 bytes/write [ 10.781384] at24 7-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write [ 10.782417] at24 8-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write [ 10.825632] at24 10-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write [ 10.852503] at24 11-0052: 256 byte spd EEPROM, read-only, 0 bytes/write [ 10.853517] at24 11-0054: 256 byte spd EEPROM, read-only, 0 bytes/write [ 10.854528] at24 12-0052: 256 byte spd EEPROM, read-only, 0 bytes/write [ 10.855677] at24 12-0054: 256 byte spd EEPROM, read-only, 0 bytes/write [ 10.871424] IPv6: ADDRCONF(NETDEV_UP): enP2p1s0f0: link is not ready [ 10.871467] IPv6: ADDRCONF(NETDEV_CHANGE): enP2p1s0f0: link becomes ready [ 11.620574] scsi 3:0:0:0: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 [ 11.622529] sd 3:0:0:0: Attached scsi generic sg25 type 0 [ 11.623143] sd 3:0:0:0: Power-on or device reset occurred [ 11.625043] scsi 3:0:0:1: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 [ 11.626418] sd 3:0:0:0: [sdw] 209715200 512-byte logical blocks: (107 GB/100 GiB) [ 11.627033] sd 3:0:0:0: [sdw] Write Protect is off [ 11.627035] sd 3:0:0:0: [sdw] Mode Sense: 97 00 10 08 [ 11.627266] sd 3:0:0:1: Attached scsi generic sg26 type 0 [ 11.627880] sd 3:0:0:1: Power-on or device reset occurred [ 11.628502] sd 3:0:0:0: [sdw] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 11.629199] scsi 3:0:0:2: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 [ 11.631137] sd 3:0:0:1: [sdx] 209715200 512-byte logical blocks: (107 GB/100 GiB) [ 11.631285] sd 3:0:0:2: Attached scsi generic sg27 type 0 [ 11.631825] sd 3:0:0:2: Power-on or device reset occurred [ 11.631852] sd 3:0:0:1: [sdx] Write Protect is off [ 11.631854] sd 3:0:0:1: [sdx] Mode Sense: 97 00 10 08 [ 11.633034] scsi 3:0:1:0: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 [ 11.633240] sd 3:0:0:1: [sdx] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 11.635170] sd 3:0:1:0: Attached scsi generic sg28 type 0 [ 11.635623] sd 3:0:1:0: Power-on or device reset occurred [ 11.635651] sd 3:0:0:2: [sdy] 314572800 512-byte logical blocks: (161 GB/150 GiB) [ 11.636340] sd 3:0:0:2: [sdy] Write Protect is off [ 11.636342] sd 3:0:0:2: [sdy] Mode Sense: 97 00 10 08 [ 11.637442] scsi 3:0:1:1: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 [ 11.637637] sd 3:0:0:2: [sdy] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 11.639042] sd 3:0:1:0: [sdz] 209715200 512-byte logical blocks: (107 GB/100 GiB) [ 11.639739] sd 3:0:1:0: [sdz] Write Protect is off [ 11.639741] sd 3:0:1:0: [sdz] Mode Sense: 97 00 10 08 [ 11.639908] sd 3:0:1:1: Attached scsi generic sg29 type 0 [ 11.640422] sd 3:0:1:1: Power-on or device reset occurred [ 11.640849] sdw: sdw1 sdw2 sdw3 [ 11.641441] sd 3:0:1:0: [sdz] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 11.642144] scsi 3:0:1:2: Direct-Access IBM 2145 0000 PQ: 0 ANSI: 6 [ 11.644505] sd 3:0:1:2: Attached scsi generic sg30 type 0 [ 11.644643] sd 3:0:1:1: [sdaa] 209715200 512-byte logical blocks: (107 GB/100 GiB) [ 11.644922] sd 3:0:1:2: Power-on or device reset occurred [ 11.645340] sdx: sdx1 [ 11.645347] sd 3:0:1:1: [sdaa] Write Protect is off [ 11.645349] sd 3:0:1:1: [sdaa] Mode Sense: 97 00 10 08 [ 11.646855] sd 3:0:1:1: [sdaa] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 11.647653] sd 3:0:0:0: [sdw] Attached SCSI disk [ 11.648734] sd 3:0:1:2: [sdab] 314572800 512-byte logical blocks: (161 GB/150 GiB) [ 11.649428] sd 3:0:1:2: [sdab] Write Protect is off [ 11.649431] sd 3:0:1:2: [sdab] Mode Sense: 97 00 10 08 [ 11.650359] sd 3:0:1:2: [sdab] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 11.651641] sd 3:0:0:1: [sdx] Attached SCSI disk [ 11.654446] sdz: sdz1 sdz2 sdz3 [ 11.654463] sdy: sdy1 sdy2 [ 11.659443] sdaa: sdaa1 [ 11.661639] sd 3:0:1:0: [sdz] Attached SCSI disk [ 11.661641] sd 3:0:0:2: [sdy] Attached SCSI disk [ 11.666141] sd 3:0:1:1: [sdaa] Attached SCSI disk [ 11.668664] sdab: sdab1 sdab2 [ 11.675339] sd 3:0:1:2: [sdab] Attached SCSI disk [ 12.110038] alua: device handler registered [ 12.111325] emc: device handler registered [ 12.112481] rdac: device handler registered [ 12.368549] device-mapper: multipath service-time: version 0.3.0 loaded [ 12.568712] device-mapper: table: 253:13: dm-5 too small for target: start=468746240, len=468746240, dev_size=585937504 [ 12.613047] device-mapper: table: 253:13: dm-5 too small for target: start=937492480, len=468762624, dev_size=585937504 [ 12.661160] device-mapper: table: 253:13: dm-5 too small for target: start=1406255104, len=8, dev_size=585937504 [ 12.737486] device-mapper: table: 253:27: multipath: error getting device [ 12.737536] device-mapper: ioctl: error adding target to table [ 12.782666] device-mapper: table: 253:27: multipath: error getting device [ 12.782714] device-mapper: ioctl: error adding target to table [ 13.736532] sd 3:0:0:0: Power-on or device reset occurred [ 13.744427] sd 3:0:1:1: Power-on or device reset occurred [ 13.744431] sd 3:0:1:2: Power-on or device reset occurred [ 13.836621] sd 3:0:0:1: Power-on or device reset occurred [ 13.837722] sd 3:0:0:2: Power-on or device reset occurred [ 13.838721] sd 3:0:1:0: Power-on or device reset occurred [ 14.418617] NFSD: starting 90-second grace period (net f0000020) [ 14.912013] FS-Cache: Loaded [ 14.927553] FS-Cache: Netfs 'nfs' registered for caching [ 14.964146] NFS: Registering the id_resolver key type [ 14.964154] Key type id_resolver registered [ 14.964155] Key type id_legacy registered [ 15.842804] sd 3:0:0:1: Power-on or device reset occurred [ 15.844104] sd 3:0:1:1: Power-on or device reset occurred [ 15.847222] sd 3:0:0:2: Power-on or device reset occurred [ 15.847920] sd 3:0:1:2: Power-on or device reset occurred [ 15.851660] sd 3:0:1:0: Power-on or device reset occurred [ 15.852431] sd 3:0:0:0: Power-on or device reset occurred [ 25.020864] sd 3:0:0:0: Power-on or device reset occurred [ 25.022064] sd 3:0:1:1: Power-on or device reset occurred [ 27.024771] sd 3:0:0:0: Power-on or device reset occurred [ 27.026119] sd 3:0:0:1: Power-on or device reset occurred [ 27.027240] sd 3:0:0:2: Power-on or device reset occurred [ 27.028496] sd 3:0:1:0: Power-on or device reset occurred [ 27.029746] sd 3:0:1:1: Power-on or device reset occurred [ 27.031392] sd 3:0:1:2: Power-on or device reset occurred [ 27.311928] qla2xxx [0030:01:00.0]-8038:2: Cable is unplugged... [ 29.032583] sd 3:0:0:1: Power-on or device reset occurred [ 29.033948] sd 3:0:1:1: Power-on or device reset occurred [ 29.042192] sd 3:0:0:2: Power-on or device reset occurred [ 29.043484] sd 3:0:1:2: Power-on or device reset occurred [ 29.047577] sd 3:0:1:0: Power-on or device reset occurred [ 29.048585] sd 3:0:0:0: Power-on or device reset occurred [ 30.313245] sd 3:0:1:0: Power-on or device reset occurred [ 30.321418] sd 3:0:1:2: Power-on or device reset occurred [ 47.083024] sd 3:0:0:0: Power-on or device reset occurred [ 47.084261] sd 3:0:1:1: Power-on or device reset occurred [ 49.087034] sd 3:0:0:0: Power-on or device reset occurred [ 49.088455] sd 3:0:0:1: Power-on or device reset occurred [ 49.089561] sd 3:0:0:2: Power-on or device reset occurred [ 49.090828] sd 3:0:1:0: Power-on or device reset occurred [ 49.092136] sd 3:0:1:1: Power-on or device reset occurred [ 49.093028] sd 3:0:1:2: Power-on or device reset occurred [ 51.095182] sd 3:0:0:1: Power-on or device reset occurred [ 51.096643] sd 3:0:1:1: Power-on or device reset occurred [ 51.106133] sd 3:0:0:2: Power-on or device reset occurred [ 51.107460] sd 3:0:1:2: Power-on or device reset occurred [ 51.111434] sd 3:0:1:0: Power-on or device reset occurred [ 51.112254] sd 3:0:0:0: Power-on or device reset occurred [ 61.219135] mon.sh (4757): drop_caches: 3 [ 66.295233] Unable to handle kernel paging request for data at address 0x8882f6ed90e9151a [ 66.295297] Faulting instruction address: 0xc00000000038a110 50:mon>