sudo ./qemu-system-ppc64 -cpu e5500 -M ppce500 --enable-kvm -device virtio-gpu-pci --nodefaults -display gtk -serial stdio -net nic,model=rtl8139 -net user -soundhw hda -kernel /run/media/amigaone/BOOT/u4111 -append "rw root=/dev/sda pci=realloc" -m 2048 -device ich9-ahci,id=ahci -device ide-drive,drive=disk0 -drive file=/dev/sdb2,if=none,id=disk0 -smp 2 -mem-prealloc -rtc clock=host,base=localtime -balloon none WARNING: Image format was not specified for '/dev/sdb2' and probing guessed raw. Automatically detecting the format is dangerous for raw images, write operations on block 0 will be restricted. Specify the 'raw' format explicitly to remove the restrictions. [ 0.000000] MMU: Supported page sizes [ 0.000000] 4 KB as direct [ 0.000000] 4096 KB as direct [ 0.000000] 16384 KB as direct [ 0.000000] 65536 KB as direct [ 0.000000] 262144 KB as direct [ 0.000000] 1048576 KB as direct [ 0.000000] MMU: Book3E HW tablewalk not supported [ 0.000000] Linux version 4.11.0-rc1-X5000-Tlosm-LB (amigaone@Amigaone) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #1 SMP PREEMPT Sun Mar 12 10:08:21 CET 2017 [ 0.000000] Using QEMU e500 machine description [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] ----------------------------------------------------- [ 0.000000] phys_mem_size = 0x80000000 [ 0.000000] dcache_bsize = 0x40 [ 0.000000] icache_bsize = 0x40 [ 0.000000] cpu_features = 0x00180400181802c0 [ 0.000000] possible = 0x00180480581802c0 [ 0.000000] always = 0x00180400581802c0 [ 0.000000] cpu_user_features = 0xcc008000 0x08000000 [ 0.000000] mmu_features = 0x000a0010 [ 0.000000] firmware_features = 0x0000000000000000 [ 0.000000] ----------------------------------------------------- qemu_e500_setup_arch() [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff] [ 0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts [ 0.000000] percpu: Embedded 21 pages/cpu @c00000007e200000 s46184 r0 d39832 u524288 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120 [ 0.000000] Kernel command line: rw root=/dev/sda pci=realloc [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Memory: 1978492K/2097152K available (10988K kernel code, 1920K rwdata, 5652K rodata, 396K init, 1498K bss, 118660K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Setting up MPIC " OpenPIC " version 1.2 at fe0040000, max 2 CPUs [ 0.000000] mpic: ISU size: 256, shift: 8, mask: ff [ 0.000000] mpic: Initializing for 256 sources [ 0.000020] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns [ 0.001954] clocksource: timebase mult[14000000] shift[24] registered [ 0.003567] Console: colour dummy device 80x25 [ 0.004826] pid_max: default: 32768 minimum: 301 [ 0.005906] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.007205] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.012739] e500 family performance monitor hardware support registered [ 0.021254] smp: Bringing up secondary CPUs ... [ 0.030858] smp: Brought up 1 node, 2 CPUs [ 0.035650] devtmpfs: initialized [ 0.038559] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.040708] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.042244] xor: measuring software checksum speed [ 0.053314] 8regs : 4432.000 MB/sec [ 0.063389] 8regs_prefetch: 4080.000 MB/sec [ 0.076952] 32regs : 6332.000 MB/sec [ 0.090404] 32regs_prefetch: 4124.000 MB/sec [ 0.091490] xor: using function: 32regs (6332.000 MB/sec) [ 0.092611] prandom: seed boundary self test passed [ 0.095030] prandom: 100 self tests passed [ 0.098779] NET: Registered protocol family 16 [ 0.104307] cpuidle: using governor ladder [ 0.105569] cpuidle: using governor menu [ 0.110132] Found FSL PCI host bridge at 0x0000000fe0008000. Firmware bus number: 0->255 [ 0.112401] PCI host bridge /pci@fe0008000 (primary) ranges: [ 0.113933] MEM 0x0000000c00000000..0x0000000c1fffffff -> 0x00000000e0000000 [ 0.115818] IO 0x0000000fe1000000..0x0000000fe100ffff -> 0x0000000000000000 [ 0.121235] /pci@fe0008000: PCICSRBAR @ 0xdff00000 [ 0.122659] setup_pci_atmu: end of DRAM 80000000 [ 0.130877] Machine: QEMU ppce500 [ 0.131974] SoC family: QorIQ [ 0.132758] SoC ID: svr:0x00000000, Revision: 0.0 [ 0.137592] fsl-pamu: fsl_pamu_init: could not find a PAMU node [ 0.149329] PCI: Probing PCI hardware [ 0.151690] fsl-pci fe0008000.pci: PCI host bridge to bus 8000:00 [ 0.153429] pci_bus 8000:00: root bus resource [io 0x8000080000010000-0x800008000001ffff] (bus address [0x0000-0xffff]) [ 0.156103] pci_bus 8000:00: root bus resource [mem 0xc00000000-0xc1fffffff] (bus address [0xe0000000-0xffffffff]) [ 0.158099] pci_bus 8000:00: root bus resource [bus 00-ff] [ 0.173076] pci 8000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.175915] pci 8000:00:00.0: PCI bridge to [bus 01-ff] [ 0.177153] PCI: Cannot allocate resource region 0 of device 8000:00:00.0, will remap [ 0.178798] pci 8000:00:00.0: BAR 0: assigned [mem 0xc00000000-0xc000fffff] [ 0.181198] pci 8000:00:00.0: BAR 14: assigned [mem 0xc00100000-0xc001fffff] [ 0.182828] pci 8000:00:01.0: BAR 6: assigned [mem 0xc00200000-0xc0023ffff pref] [ 0.184082] pci 8000:00:02.0: BAR 0: assigned [mem 0xc00240000-0xc00243fff] [ 0.185260] pci 8000:00:03.0: BAR 4: assigned [mem 0xc00244000-0xc00247fff 64bit pref] [ 0.186679] pci 8000:00:03.0: BAR 1: assigned [mem 0xc00248000-0xc00248fff] [ 0.187995] pci 8000:00:04.0: BAR 5: assigned [mem 0xc00249000-0xc00249fff] [ 0.189189] pci 8000:00:01.0: BAR 0: assigned [io 0x8000080000011000-0x80000800000110ff] [ 0.191273] pci 8000:00:01.0: BAR 1: assigned [mem 0xc0024a000-0xc0024a0ff] [ 0.192556] pci 8000:00:04.0: BAR 4: assigned [io 0x8000080000011400-0x800008000001141f] [ 0.194021] pci 8000:00:00.0: PCI bridge to [bus 01] [ 0.194865] pci 8000:00:00.0: bridge window [io 0x8000080000010000-0x8000080000010fff] [ 0.196302] pci 8000:00:00.0: bridge window [mem 0xc00100000-0xc001fffff] [ 0.336996] raid6: int64x1 gen() 695 MB/s [ 0.361067] raid6: int64x1 xor() 759 MB/s [ 0.381746] raid6: int64x2 gen() 1449 MB/s [ 0.402003] raid6: int64x2 xor() 1041 MB/s [ 0.425873] raid6: int64x4 gen() 1226 MB/s [ 0.447559] raid6: int64x4 xor() 1009 MB/s [ 0.532915] raid6: int64x8 gen() 2355 MB/s [ 0.553927] raid6: int64x8 xor() 884 MB/s [ 0.555125] raid6: using algorithm int64x8 gen() 2355 MB/s [ 0.556658] raid6: .... xor() 884 MB/s, rmw enabled [ 0.558073] raid6: using intx1 recovery algorithm [ 0.560455] Freescale Elo series DMA driver [ 0.563316] vgaarb: loaded [ 0.566922] SCSI subsystem initialized [ 0.573774] usbcore: registered new interface driver usbfs [ 0.578217] usbcore: registered new interface driver hub [ 0.582016] usbcore: registered new device driver usb [ 0.585689] pps_core: LinuxPPS API ver. 1 registered [ 0.588717] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.593838] PTP clock support registered [ 0.604014] EDAC MC: Ver: 3.0.0 [ 0.620077] Advanced Linux Sound Architecture Driver Initialized. [ 0.635655] clocksource: Switched to clocksource timebase [ 0.673923] NET: Registered protocol family 2 [ 0.679440] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.681880] TCP bind hash table entries: 16384 (order: 7, 524288 bytes) [ 0.692947] TCP: Hash tables configured (established 16384 bind 16384) [ 0.696660] UDP hash table entries: 1024 (order: 4, 98304 bytes) [ 0.698786] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes) [ 0.702224] NET: Registered protocol family 1 [ 0.710690] RPC: Registered named UNIX socket transport module. [ 0.713440] RPC: Registered udp transport module. [ 0.714570] RPC: Registered tcp transport module. [ 0.715430] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.729884] audit: initializing netlink subsys (disabled) [ 0.735398] audit: type=2000 audit(0.554:1): state=initialized audit_enabled=0 res=1 [ 0.746602] workingset: timestamp_bits=62 max_order=19 bucket_order=0 [ 0.775297] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.790404] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.796809] fuse init (API version 7.26) [ 0.870705] async_tx: api initialized (async) [ 0.875201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 0.879982] io scheduler noop registered [ 0.882739] io scheduler deadline registered [ 0.889384] io scheduler cfq registered (default) [ 0.890925] io scheduler mq-deadline registered [ 0.893825] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.895176] crc32: self tests passed, processed 225944 bytes in 980680 nsec [ 0.897761] crc32c: CRC_LE_BITS = 64 [ 0.898733] crc32c: self tests passed, processed 225944 bytes in 216020 nsec [ 0.942197] crc32_combine: 8373 self tests passed [ 0.983867] crc32c_combine: 8373 self tests passed [ 0.986712] glob: 64 self-tests passed, 0 failed [ 1.223104] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled [ 1.232379] console [ttyS0] disabled [ 1.271151] serial8250.0: ttyS0 at MMIO 0xfe0004500 (irq = 42, base_baud = 115200) is a 16550A [ 1.274468] console [ttyS0] enabled [ 1.274468] console [ttyS0] enabled [ 1.276781] bootconsole [udbg0] disabled [ 1.276781] bootconsole [udbg0] disabled [ 1.282909] ePAPR hypervisor byte channel driver [ 1.286167] [drm] radeon kernel modesetting enabled. [ 1.348065] brd: module loaded [ 1.429072] loop: module loaded [ 1.437174] Loading iSCSI transport class v2.0-870. [ 1.454400] iscsi: registered transport (tcp) [ 1.465878] ahci 8000:00:04.0: enabling device (0000 -> 0003) [ 1.481443] ahci 8000:00:04.0: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.484162] ahci 8000:00:04.0: flags: ncq only [ 1.514739] scsi host0: ahci [ 1.520296] scsi host1: ahci [ 1.544877] scsi host2: ahci [ 1.549903] scsi host3: ahci [ 1.553315] scsi host4: ahci [ 1.558573] scsi host5: ahci [ 1.560801] ata1: SATA max UDMA/133 abar m4096@0xc00249000 port 0xc00249100 irq 21 [ 1.576671] ata2: SATA max UDMA/133 abar m4096@0xc00249000 port 0xc00249180 irq 21 [ 1.580660] ata3: SATA max UDMA/133 abar m4096@0xc00249000 port 0xc00249200 irq 21 [ 1.582326] ata4: SATA max UDMA/133 abar m4096@0xc00249000 port 0xc00249280 irq 21 [ 1.583845] ata5: SATA max UDMA/133 abar m4096@0xc00249000 port 0xc00249300 irq 21 [ 1.585363] ata6: SATA max UDMA/133 abar m4096@0xc00249000 port 0xc00249380 irq 21 [ 1.589397] platform physmap-flash.0: failed to claim resource 0: [mem 0x08000000-0x07ffffff] [ 1.593758] libphy: Fixed MDIO Bus: probed [ 1.595854] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.598641] 8139cp 8000:00:01.0: enabling device (0000 -> 0003) [ 1.628465] 8139cp 8000:00:01.0 eth0: RTL-8139C+ at 0x8000080080027000, 52:54:00:12:34:56, IRQ 17 [ 1.636199] PPP generic driver version 2.4.2 [ 1.639490] PPP BSD Compression module registered [ 1.640609] PPP Deflate Compression module registered [ 1.642811] NET: Registered protocol family 24 [ 1.646760] VFIO - User Level meta-driver version: 0.3 [ 1.658360] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.663621] ehci-pci: EHCI PCI platform driver [ 1.666525] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.668857] ohci-pci: OHCI PCI platform driver [ 1.676045] ehci-fsl: Freescale EHCI Host controller driver [ 1.680349] usbcore: registered new interface driver usblp [ 1.683258] usbcore: registered new interface driver usb-storage [ 1.686402] usbcore: registered new interface driver usbserial [ 1.688662] usbcore: registered new interface driver usbserial_generic [ 1.691566] usbserial: USB Serial support registered for generic [ 1.693483] usbcore: registered new interface driver ftdi_sio [ 1.696108] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.711243] mousedev: PS/2 mouse device common for all mice [ 1.717664] usbcore: registered new interface driver iforce [ 1.725253] usbcore: registered new interface driver xpad [ 1.734910] i2c /dev entries driver [ 1.772351] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com [ 1.778156] Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software [ 1.785645] EDAC PCI0: Giving out device to module MPC85xx_edac controller mpc85xx_pci_err: DEV mpc85xx-pci-edac.0.auto (INTERRUPT) [ 1.789590] MPC85xx_edac acquired irq 24 for PCI Err [ 1.790714] MPC85xx_edac PCI err registered [ 1.797970] sdhci: Secure Digital Host Controller Interface driver [ 1.799252] sdhci: Copyright(c) Pierre Ossman [ 1.800781] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.807134] hidraw: raw HID events driver (C) Jiri Kosina [ 1.813285] usbcore: registered new interface driver usbhid [ 1.814657] usbhid: USB HID core driver [ 1.815434] Freescale hypervisor management driver [ 1.817235] fsl-hv: no hypervisor found [ 1.874996] no UART detected at 0x1 [ 1.893316] snd_hda_intel 8000:00:02.0: enabling device (0000 -> 0002) [ 1.897385] snd_hda_intel 8000:00:02.0: Force to snoop mode by module option [ 1.907084] snd_hda_intel 8000:00:02.0: no codecs initialized [ 1.911396] ata2: SATA link down (SStatus 0 SControl 300) [ 1.913857] usbcore: registered new interface driver snd-usb-audio [ 1.914062] usbcore: registered new interface driver snd-ua101 [ 1.914191] usbcore: registered new interface driver snd-usb-usx2y [ 1.914784] ata5: SATA link down (SStatus 0 SControl 300) [ 1.925182] ata4: SATA link down (SStatus 0 SControl 300) [ 1.934946] ata3: SATA link down (SStatus 0 SControl 300) [ 1.935615] ipip: IPv4 and MPLS over IPv4 tunneling driver [ 1.940259] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.941892] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.941996] Initializing XFRM netlink socket [ 1.943023] NET: Registered protocol family 10 [ 1.950246] ata1: SATA link down (SStatus 0 SControl 300) [ 1.955895] ata6.00: ATA-7: QEMU HARDDISK, 2.5+, max UDMA/100 [ 1.957200] ata6.00: 175783230 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.959516] Segment Routing with IPv6 [ 1.959723] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.961728] ata6.00: applying bridge limits [ 1.963299] ata6.00: configured for UDMA/100 [ 1.967622] scsi 5:0:0:0: Direct-Access ATA QEMU HARDDISK 2.5+ PQ: 0 ANSI: 5 [ 1.972770] NET: Registered protocol family 17 [ 1.974286] NET: Registered protocol family 15 [ 1.977010] sd 5:0:0:0: [sda] 175783230 512-byte logical blocks: (90.0 GB/83.8 GiB) [ 1.977067] sd 5:0:0:0: Attached scsi generic sg0 type 0 [ 1.978399] sd 5:0:0:0: [sda] Write Protect is off [ 1.978907] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.994152] Key type dns_resolver registered [ 2.023049] Btrfs loaded, crc32c=crc32c-generic [ 2.027204] Key type encrypted registered [ 2.030651] hctosys: unable to open rtc device (rtc0) [ 2.032253] ALSA device list: [ 2.033764] #0: Virtual MIDI Card 1 [ 2.058351] sd 5:0:0:0: [sda] Attached SCSI disk [ 2.061063] md: Waiting for all devices to be available before autodetect [ 2.062463] md: If you don't use raid, use raid=noautodetect [ 2.068823] md: Autodetecting RAID arrays. [ 2.070106] md: autorun ... [ 2.070700] md: ... autorun DONE. [ 2.076333] EXT4-fs (sda): couldn't mount as ext3 due to feature incompatibilities [ 2.081000] EXT4-fs (sda): couldn't mount as ext2 due to feature incompatibilities [ 2.114158] hrtimer: interrupt took 4354280 ns [ 2.403765] random: fast init done [ 2.665312] EXT4-fs (sda): recovery complete [ 2.678021] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null) [ 2.680880] VFS: Mounted root (ext4 filesystem) on device 8:0. [ 2.719749] devtmpfs: mounted [ 2.721238] Freeing unused kernel memory: 396K [ 2.722285] This architecture does not have kernel memory protection. [ 2.836743] random: crng init done [ 3.604877] systemd[1]: System time before build time, advancing clock. [ 3.719134] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 3.725779] systemd[1]: Detected virtualization kvm. [ 3.727210] systemd[1]: Detected architecture ppc64. Welcome to Ubuntu 16.10! [ 3.799429] systemd[1]: Set hostname to . [ 7.168805] systemd[1]: lwresd.service: Cannot add dependency job, ignoring: Unit lwresd.service is masked. [ 7.171297] systemd[1]: dns-clean.service: Cannot add dependency job, ignoring: Unit dns-clean.service is masked. [ 7.173771] systemd[1]: cgproxy.service: Cannot add dependency job, ignoring: Unit cgproxy.service is masked. [ 7.176203] systemd[1]: cgmanager.service: Cannot add dependency job, ignoring: Unit cgmanager.service is masked. [ 7.185246] systemd[1]: Listening on fsck to fsckd communication Socket. [ OK ] Listening on fsck to fsckd communication Socket. [ 7.192725] systemd[1]: Reached target Encrypted Volumes. [ OK ] Reached target Encrypted Volumes. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on udev Kernel Socket. [ OK ] Listening on udev Control Socket. [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. [ OK ] Listening on Journal Socket. [ OK ] Listening on Syslog Socket. [ OK ] Listening on Device-mapper event daemon FIFOs. [ OK ] Created slice System Slice. Starting Set the console keyboard layout... [ OK ] Created slice system-postfix.slice. Starting Load Kernel Modules... [ OK ] Created slice system-serial\x2dgetty.slice. Mounting POSIX Message Queue File System... Starting Nameserver information manager... [ OK ] Listening on Journal Audit Socket. [ OK ] Reached target Remote File Systems. Starting Uncomplicated firewall... [ OK ] Listening on Journal Socket (/dev/log). Starting Journal Service... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Reached target User and Group Name Lookups. [ OK ] Listening on LVM2 metadata daemon socket. Starting Monitoring of LVM2 mirrors... dmeventd or progress polling... Starting Create list of required st... nodes for the current kernel... [ OK ] Started Uncomplicated firewall. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Create Static Device Nodes in /dev... [ OK ] Mounted POSIX Message Queue File System. [ 8.984283] systemd[1]: Started Nameserver information manager. [ OK ] Started Nameserver information manager. [ 9.092466] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 9.104003] systemd[1]: Failed to start Load Kernel Modules. [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ 9.126026] systemd[1]: systemd-modules-load.service: Unit entered failed state. [ 9.129440] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 9.159341] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 9.190072] systemd[1]: Mounting Configuration File System... Mounting Configuration File System... [ 9.228270] systemd[1]: Mounting FUSE Control File System... Mounting FUSE Control File System... [ 9.277197] systemd[1]: Started LVM2 metadata daemon. [ OK ] Started LVM2 metadata daemon. [ 9.346195] systemd[1]: Mounted Configuration File System. [ OK ] Mounted Configuration File System. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Mounted FUSE Control File System. [ OK ] Started Apply Kernel Variables. [ OK ] Started Journal Service. [ OK ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling. [ OK ] Started Set the console keyboard layout. [ OK ] Started udev Kernel Device Manager. Starting Remount Root and Kernel File Systems... [ OK ] Started Remount Root and Kernel File Systems. Starting udev Coldplug all Devices... Starting Load/Save Random Seed... Starting Flush Journal to Persistent Storage... [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Enable support for additional executable binary formats... Starting Set console font and keymap... Starting ebtables ruleset management... Starting Tell Plymouth To Write Out Runtime Data... Mounting Arbitrary Executable File Formats File System... [ OK ] Mounted Arbitrary Executable File Formats File System. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Set console font and keymap. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load/Save Random Seed. Starting Create Volatile Files and Directories... [ OK ] Started ebtables ruleset management. [ OK ] Reached target Network (Pre). Starting Raise network interfaces... [ OK ] Started Create Volatile Files and Directories. [ OK ] Reached target System Time Synchronized. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Enable support for additional executable binary formats. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Sound Card. [ OK ] Found device /dev/ttyS0. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [FAILED] Failed to start Raise network interfaces. See 'systemctl status networking.service' for details. [ TIME ] Timed out waiting for device dev-di...\x2da845\x2da3f6e762b3f5.device. [DEPEND] Dependency failed for /dev/disk/by-...b02-5a8c-4b9b-a845-a3f6e762b3f5. [DEPEND] Dependency failed for Swap. [ TIME ] Timed out waiting for device dev-di...\x2db43d\x2dfe2afead48e9.device. [DEPEND] Dependency failed for /mnt/c7a1331a-6bfe-436e-b43d-fe2afead48e9. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started CUPS Scheduler. [ OK ] Reached target Paths. [ OK ] Listening on CUPS Scheduler. Starting Socket activation for snappy daemon. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Timer to automatically refresh installed snaps. [ OK ] Started Daily apt activities. [ OK ] Reached target Timers. [ OK ] Listening on UUID daemon activation socket. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Listening on Socket activation for snappy daemon. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started FUSE filesystem for LXC. Starting Postfix Mail Transport Agent (instance -)... Starting LSB: Starts LIRC daemon.... Starting Restore /etc/resolv.conf i...re the ppp link was shut down... [ OK ] Started Regular background program processing daemon. [ OK ] Started OSS Proxy Daemon. Starting Daemon which manages crypt... for the openCryptoki package... Starting Login Service... [ OK ] Started Run anacron jobs. Starting LSB: Load kernel modules needed to enable cpufreq scaling... Starting Modem Manager... Starting System Logging Service... Starting LSB: Speech Dispatcher... [ OK ] Started Avahi DNS Configuration Daemon. Starting Accounts Service... Starting Initialize hardware monitoring sensors... Starting LSB: automatic crash report generation... Starting Save/Restore Sound Card State... Starting Avahi mDNS/DNS-SD Stack... Starting LSB: Start the GNUstep distributed object mapper... [ OK ] Started CUPS Scheduler. Starting controls configuration of serial ports... [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. Starting LSB: daemon to balance interrupts for SMP systems... [ OK ] Started D-Bus System Message Bus. [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started Make remote CUPS printers available locally. Starting Network Manager... Starting controls configuration of serial ports... Starting LSB: handle special hotkeys of Apple computers... [ OK ] Started crash report submission daemon. Starting LSB: Start daemon at boot time... [ OK ] Started Snappy daemon. Starting Auto import assertions from block devices... [ OK ] Started System Logging Service. [ OK ] Started Restore /etc/resolv.conf if...fore the ppp link was shut down. [ OK ] Started Daemon which manages crypto...ns for the openCryptoki package. [ OK ] Started LSB: handle special hotkeys of Apple computers. [ OK ] Started Login Service. Starting Authenticate and Authorize Users to Run Privileged Tasks... Starting Manage, Install and Generate Color Profiles... [ OK ] Started Initialize hardware monitoring sensors. Starting LSB: lm-sensors daemon... [ OK ] Started LSB: Start daemon at boot time. [ OK ] Started LSB: Start the GNUstep distributed object mapper. [ OK ] Started LSB: Speech Dispatcher. [ OK ] Started controls configuration of serial ports. [ OK ] Started LSB: Starts LIRC daemon.. [ OK ] Started Save/Restore Sound Card State. [ OK ] Started LSB: automatic crash report generation. [ 107.338316] Unable to handle kernel paging request for data at address 0x00000002 [ OK ] Started LSB: daemon to balance interrupts for SMP systems. [ 107.388902] Faulting instruction address: 0xc00000000048797c [ 107.400846] Oops: Kernel access of bad area, sig: 11 [#1] [ 107.402459] PREEMPT [ 107.402463] SMP NR_CPUS=16 [ 107.403081] QEMU e500 [ 107.404576] Modules linked in: virtio_gpu virtio_pci virtio_ring virtio uio_pdrv_genirq uio [ 107.407437] CPU: 0 PID: 3737 Comm: setserial Not tainted 4.11.0-rc1-X5000-Tlosm-LB #1 [ 107.408979] task: c00000007a7b4600 task.stack: c00000007a51c000 [ 107.410144] NIP: c00000000048797c LR: c000000000488e98 CTR: c000000000487950 [ 107.411538] REGS: c00000007a51f5e0 TRAP: 0300 Not tainted (4.11.0-rc1-X5000-Tlosm-LB) [ 107.413439] MSR: 0000000090029000 [ 107.413473] CR: 44002888 XER: 00000000 [ 107.415747] DEAR: 0000000000000002 ESR: 0000000000800000 SOFTE: 1 [ 107.415747] GPR00: c00000000048ab94 c00000007a51f860 c000000001274a00 c0000000013d9508 [ 107.415747] GPR04: 0000000000000002 0000000000000001 0000000000000000 0000000000000080 [ 107.415747] GPR08: 0000000000000000 0000000000000002 0000000000000000 0000000000000180 [ 107.415747] GPR12: 0000000024002882 c00000003fff8000 0000000000000000 c0000000013d9508 [ 107.415747] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 107.415747] GPR20: 00000000000001f4 c000000079312b70 c00000007a0a0d20 0000000000007530 [ 107.415747] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 107.415747] GPR28: c00000007a0a0c00 fffffffffffffff4 c0000000013d9508 c0000000013d9508 [ 107.434003] NIP [c00000000048797c] .io_serial_out+0x2c/0x3c [ 107.435460] LR [c000000000488e98] .serial8250_clear_fifos+0x40/0x9c [ 107.437090] Call Trace: [ 107.437745] [c00000007a51f860] [c00000007a51f900] 0xc00000007a51f900 (unreliable) [ 107.439820] [c00000007a51f8e0] [c00000000048ab94] .serial8250_do_startup+0x34c/0xa8c [ 107.441831] [c00000007a51f980] [c0000000004837dc] .uart_port_startup+0x98/0x130 [ 107.443724] [c00000007a51fa20] [c000000000485770] .uart_startup+0x24/0x54 [ 107.445481] [c00000007a51faa0] [c000000000485dec] .uart_ioctl+0x64c/0x914 [ 107.447410] [c00000007a51fc10] [c000000000467a78] .tty_ioctl+0x14c/0xd5c [ 107.449212] [c00000007a51fd10] [c000000000145838] .vfs_ioctl+0x38/0x5c [ 107.450974] [c00000007a51fd80] [c000000000184e6c] .compat_SyS_ioctl+0x4e8/0x1d5c [ 107.453294] [c00000007a51fe30] [c000000000000674] system_call+0x38/0xbc [ 107.455389] Instruction dump: [ 107.456298] 4e800020 3d220002 54a5063e 3949e230 e9230018 e94a0000 7d295214 894300b1 [ 107.458547] 7c845030 7c8407b4 7d292214 7c0004ac <98a90000> 39200001 992d0684 4e800020 [ 107.460656] ---[ end trace 14aeb8256fc1628d ]--- [ 107.461866] [ OK ] Started Authenticate and Authorize Users to Run Privileged Tasks. [ OK ] Started Accounts Service. [ OK ] Started Manage, Install and Generate Color Profiles. [ OK ] Started LSB: lm-sensors daemon. [ OK ] Started Modem Manager. [ OK ] Started Network Manager. Starting Network Manager Wait Online... [ OK ] Reached target Network. Starting Permit User Sessions... Starting OpenVPN service... Starting Network Name Resolution... Starting Postfix Mail Transport Agent... Starting Samba NMB Daemon... Starting Samba SMB Daemon... Starting Suspend Active Libvirt Guests... Starting OpenBSD Secure Shell server... [ OK ] Started OpenVPN service. [ OK ] Started Postfix Mail Transport Agent. [ OK ] Started Auto import assertions from block devices. [ OK ] Started Permit User Sessions. Starting Light Display Manager... Starting Network Manager Script Dispatcher Service... [ OK ] Started Suspend Active Libvirt Guests. [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling. Starting LSB: set CPUFreq kernel parameters... [ OK ] Started LSB: set CPUFreq kernel parameters. Starting Hostname Service... [ OK ] Started Hostname Service. [ OK ] Started Light Display Manager. [ OK ] Started Network Name Resolution. [ 120.228476] IPv6: ADDRCONF(NETDEV_UP): enP32768p0s1: link is not ready [ 120.285158] 8139cp 8000:00:01.0 enP32768p0s1: link up, 100Mbps, full-duplex, lpa 0x05E1 [ OK ] Started Samba SMB Daemon. [ OK ] Stopped Light Display Manager. Starting Light Display Manager... [ OK ] Started Light Display Manager. [ OK ] Started Samba NMB Daemon. [ OK ] Started Network Manager Wait Online. [ OK ] Reached target Network is Online. Starting LSB: starts tcsd... Starting LSB: disk temperature monitoring daemon... Starting /etc/rc.local Compatibility... Starting LXC network bridge setup... Starting LSB: Start NTP daemon... [ OK ] Started /etc/rc.local Compatibility. Starting Hold until boot process finishes up... [ OK ] Started Hold until boot process finishes up. [ OK ] Started Serial Getty on ttyS0. Starting Set console scheme... [ OK ] Started LSB: starts tcsd. [ OK ] Stopped Light Display Manager. Starting Light Display Manager... [FAILED] Failed to start LXC network bridge setup. See 'systemctl status lxc-net.service' for details. [ OK ] Started Set console scheme. Starting LXC Container Initialization and Autoboot Code... [ OK ] Started LSB: disk temperature monitoring daemon. [ OK ] Started Postfix Mail Transport Agent (instance -). [ OK ] Started LSB: Start NTP daemon. [ OK ] Started Light Display Manager. [ OK ] Stopped Light Display Manager. Starting Light Display Manager... Ubuntu 16.10 Amigaone ttyS0 Amigaone login: amigaone Password: Last login: Tue Mar 28 19:42:29 CEST 2017 on ttyS0 Welcome to Ubuntu 16.10 (GNU/Linux 4.11.0-rc1-X5000-Tlosm-LB ppc64) * Documentation: https://help.ubuntu.com * Management: https://landscape.canonical.com * Support: https://ubuntu.com/advantage 0 packages can be updated. 0 updates are security updates. ➜ ~ lspci 8000:00:00.0 PCI bridge: Freescale Semiconductor Inc MPC8533E 8000:00:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 20) 8000:00:02.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 01) 8000:00:03.0 Display controller: Red Hat, Inc Virtio GPU (rev 01) 8000:00:04.0 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] (rev 02) ➜ ~ lshw WARNING: you should run this program as super-user. amigaone description: Computer product: QEMU ppce500 width: 32 bits capabilities: smp *-core description: Motherboard physical id: 0 *-cpu:0 description: CPU product: e5500 physical id: 1 bus info: cpu@0 version: 1.2 (pvr 8024 0012) size: 2200MHz *-cache description: L1 Cache physical id: 0 size: 32KiB *-cpu:1 description: CPU product: e5500 physical id: 2 bus info: cpu@1 version: 1.2 (pvr 8024 0012) size: 2200MHz *-cache description: L1 Cache physical id: 0 size: 32KiB *-memory description: System memory physical id: 3 size: 1997MiB *-pci description: PCI bridge product: MPC8533E vendor: Freescale Semiconductor Inc physical id: 0 bus info: pci@8000:00:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pci normal_decode bus_master resources: memory:c00000000-c000fffff ioport:0(size=4096) memory:c00100000-c001fffff *-network description: Ethernet interface product: RTL-8100/8101L/8139 PCI Fast Ethernet Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 1 bus info: pci@8000:00:01.0 logical name: enP32768p0s1 version: 20 serial: 52:54:00:12:34:56 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: bus_master rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139cp driverversion=1.3 duplex=full ip=10.0.2.15 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:17 ioport:1000(size=256) memory:c0024a000-c0024a0ff memory:c00200000-c0023ffff *-multimedia description: Audio device product: 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller vendor: Intel Corporation physical id: 2 bus info: pci@8000:00:02.0 version: 01 width: 32 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:22 memory:c00240000-c00243fff *-display description: Display controller product: Virtio GPU vendor: Red Hat, Inc physical id: 3 bus info: pci@8000:00:03.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=virtio-pci latency=0 resources: irq:19 memory:c00248000-c00248fff memory:c00244000-c00247fff *-virtio0 UNCLAIMED description: Virtual I/O device physical id: 0 bus info: virtio@0 configuration: driver=virtio_gpu *-storage description: SATA controller product: 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 4 bus info: pci@8000:00:04.0 version: 02 width: 32 bits clock: 33MHz capabilities: storage ahci_1.0 bus_master cap_list configuration: driver=ahci latency=0 resources: irq:21 ioport:1400(size=32) memory:c00249000-c00249fff *-network DISABLED description: Ethernet interface physical id: 1 logical name: dummy0 serial: 36:9d:b6:94:47:18 capabilities: ethernet physical configuration: broadcast=yes driver=dummy driverversion=1.0 ➜ ~ lsmod Module Size Used by cpufreq_userspace 5453 0 cpufreq_conservative 8179 0 cpufreq_ondemand 12168 0 cpufreq_powersave 3442 0 virtio_gpu 64919 1 virtio_pci 21943 0 virtio_ring 20473 2 virtio_gpu,virtio_pci virtio 12204 2 virtio_gpu,virtio_pci uio_pdrv_genirq 7397 0 uio 17290 1 uio_pdrv_genirq ➜ ~ sudo /etc/init.d/lightdm stop [sudo] password for amigaone: Stopping lightdm (via systemctl): lightdm.service. ➜ ~ sudo xinit X.Org X Server 1.18.4 Release Date: 2016-07-19 X Protocol Version 11, Revision 0 Build Operating System: Linux 4.4.0-43-powerpc64-smp ppc Ubuntu Current Operating System: Linux Amigaone 4.11.0-rc1-X5000-Tlosm-LB #1 SMP PREEMPT Sun Mar 12 10:08:21 CET 2017 ppc64 Kernel command line: rw root=/dev/sda pci=realloc Build Date: 02 November 2016 10:08:00PM xorg-server 2:1.18.4-1ubuntu6.1 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.33.6 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 28 19:48:15 2017 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) Fatal server error: (EE) no screens found(EE) (EE) Please consult the The X.Org Foundation support at http://wiki.x.org for help. (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information. (EE) (EE) Server terminated with error (1). Closing log file. dmesg | grep drm [ 2.737370] [drm] radeon kernel modesetting enabled. [ 100.293796] [drm] pci: virtio-gpu-pci detected at 8000:00:03.0 [ 100.316029] [drm] virgl 3d acceleration not supported by guest [ 100.325830] [drm] virtio vbuffers: 96 bufs, 192B each, 18kB total. [ 100.334408] [drm] number of scanouts: 16777216 [ 100.334432] [drm] number of cap sets: 0 [ 100.471834] [drm] Cannot find any crtc or sizes - going 1024x768 [ 100.546083] virtio_gpu virtio0: fb0: virtiodrmfb frame buffer device [ 100.546263] [drm] Initialized virtio_gpu 0.0.1 0 for virtio0 on minor 0 ➜ ~ dmesg | grep virtio [ 50.301572] virtio-pci 8000:00:03.0: enabling device (0000 -> 0002) [ 100.293796] [drm] pci: virtio-gpu-pci detected at 8000:00:03.0 [ 100.325830] [drm] virtio vbuffers: 96 bufs, 192B each, 18kB total. [ 100.546083] virtio_gpu virtio0: fb0: virtiodrmfb frame buffer device [ 100.546263] [drm] Initialized virtio_gpu 0.0.1 0 for virtio0 on minor 0 [ 148.901987] Modules linked in: virtio_gpu virtio_pci virtio_ring virtio uio_pdrv_genirq uio lspci -nnk 8000:00:00.0 PCI bridge [0604]: Freescale Semiconductor Inc MPC8533E [1957:0030] 8000:00:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 20) Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100] Kernel driver in use: 8139cp 8000:00:02.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 01) Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100] Kernel driver in use: snd_hda_intel 8000:00:03.0 Display controller [0380]: Red Hat, Inc Virtio GPU [1af4:1050] (rev 01) Subsystem: Red Hat, Inc Virtio GPU [1af4:1100] Kernel driver in use: virtio-pci Kernel modules: virtio_pci 8000:00:04.0 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] [8086:2922] (rev 02) Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100] Kernel driver in use: ahci