185175_[F06G]System dmesg and messages will occur some abnormall messages after install Ubuntu14.04.2 with OCE14102-UM PCIe card.

[Mark W Wenning]

Steps to reproduce the problem
==============================
1. Plug-in PCIe card OCE14102-UM.
2. Install Ubuntu14.04.2 UEFI mode by PXE.
3. After OS installation finished, use WhiteList tool to check if there has error messages or not.

Please help clarify below error message could be ignore, or not.
dmesg:
FAIL Aug 9 10:53:17 quanta kernel: [ 2.327316] be2net 0000:01:00.0: PCIe error reporting enabled
FAIL Aug 9 10:53:17 quanta kernel: [ 3.266823] be2net 0000:01:00.1: PCIe error reporting enabled
FAIL Aug 9 10:53:17 quanta dhclient: Error getting interface address for 'eth2'; No such device
FAIL Aug 9 10:53:17 quanta dhclient: Error getting interface information.
FAIL Aug 9 11:04:57 quanta dhclient: Error getting interface address for 'eth1'; No such device
FAIL Aug 9 11:04:57 quanta dhclient: Error getting interface information.
messages:
FAIL [ 2.211792] be2net 0000:01:00.0: PCIe error reporting enabled
FAIL [ 3.151426] be2net 0000:01:00.1: PCIe error reporting enabled

Test configuration:
=========================================================
MB:MB: Product=[F06G-AST2400], P/N=[31F06MB00Y0], S/N=[BSX61600044]
CPLD:CPLD: Device ID=[], Version=[]CPU0 VR: Version 0=[], Version 1=[]CPU1 VR: Version 0=[], Version 1=[]DIMM_AB VR: Version 0=[], Version 1=[]DIMM_CD VR: Version 0=[], Version 1=[]DIMM_EF VR: Version 0=[], Version 1=[]DIMM_GH VR: Version 0=[], Version 1=[]
OS:OS: Kernel=[3.16.0-30-generic], Description=[Ubuntu 14.04.2 LTS], Boot Mode=[UEFI]Network: Interface=[eth0], IPv4 Addr=[192.168.124.41], IPv6 Link-Local Addr=[fe80::56ab:3aff:fe74:407e], IPv6 Addr=[3ffe:124::56ab:3aff:fe74:407e]
Storage:SOM-C610(F06G-sSATA-AHCI), FW=[TBD], Driver=[3.0]
SOM-C610(F06G-SATA-AHCI), FW=[TBD], Driver=[3.0]
MTFDDAT128MBF(MTFDDAT128MBF-1AN), FW=[MU01], Driver=[NA]

CPU:E5-2643 v4(CM8066002041500),3.4GHz,QS
E5-2643 v4(CM8066002041500),3.4GHz,QS
Memory:HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[A0]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[A1]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[A4]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[A5]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[B0]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[B1]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[B2]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[B3]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[B4]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[B5]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[B6]
HMA41GR7AFR8N-UH,19200(2400MHz),8GB,DDR4,Slot=[B7]
Networking:LOM-i210(F06G-LOM-i210), FW=[3.25,NA], Driver=[5.2.13-k]
 ON 10GbE X540(37S2SLB0020), FW=[4.04.0,NA], Driver=[3.19.1-k]
ID=[10df:0720,10df:e800], FW=[10.2.370.19], Driver=[10.2u]

VGA&GPU:AST2x00(Need submit eTrack to correct SVID), FW=[1.00.07], Driver=[OS Native]

TPM:TPM: None
Others:USB Controller: ID=[8086:8d2d,152d:89b4], Bus Addr=[0000:00:1a.0], Description=[Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #2 (rev 05)], Version=[2.0]USB Controller: ID=[8086:8d26,152d:89b4], Bus Addr=[0000:00:1d.0], Description=[Intel Corporation C610/X99 series chipset USB Enhanced Host Controller #1 (rev 05)], Version=[2.0]USB Device: ID=[046b:ff10], Bus Addr=[0000:00:1a.0], Description=[American Megatrends, Inc. Virtual Keyboard and Mouse], Version=[1.10]
Power Supply:PSU: PSU Status not Found in SDR
Chassis:System: Product=[F06G-AST2400], Project=[3C05]
FRU/SDR:SDR: Version=[0x51]FRU: Board FRU ID=[FRU Ver 0.01]FRU: Builtin FRU Device (ID 0), [Chassis Type]=Rack Mount Chassis, [Chassis Serial]=QTFCKQ44603A6, [Board Mfg Date]=Fri Apr 15 13:05:00 2016, [Board Mfg]=Quanta Cloud Technology Inc., [Board Product]=F06G-AST2400, [Board Serial]=BSX61600044, [Board Part Number]=31F06MB00Y0, [Product Manufacturer]=Quanta Cloud Technology Inc., [Product Name]=F06G-AST2400, [Product Part Numb

[Brad Figg (brad-figg)]

This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run:

apport-collect 1638753

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the Ubuntu Kernel Team.

[Mark W Wenning (mwenning)]

This is a similar issue to https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1491654