Hamlib 1.2.15 doesn't work with ICOM PCR1000

[Igor]

Hi all,

$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.1 LT

$ dpkg -l | grep hamlib
libhamlib-utils 1.2.15.3-3.1build1 amd64 Utilities to support the hamlib radio control library
libhamlib2 1.2.15.3-3.1build1 amd64 Run-time library to control radio transceivers and receivers

Icom PCR1000 connected via USB to COM converter
$ lsusb | grep USB
Bus 001 Device 009: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter

rigctl -vvvvv -m 401 -r /dev/ttyUSB0 -s 9600
rigctl, Hamlib 1.2.15.3
Report bugs to <email address hidden>

rig:rig_init called
rig: loading backend pcr
pcr: init called
rig_register (402)
rig_register (401)
rig_register (403)
rig_register (404)
rig:rig_open called
pcr_send: cmd = H101, len = 4
write_block(): TX 5 bytes
0000 48 31 30 31 0a H101.
pcr_send: cmd = H101, len = 4
write_block(): TX 5 bytes
0000 48 31 30 31 0a H101.
pcr_transaction: cmd = H1?
pcr_send: cmd = H1?, len = 3
write_block(): TX 4 bytes
0000 48 31 3f 0a H1?.
pcr_read_block
read_block(): RX 1 bytes
0000 ff .
read_block(): RX 1 bytes
0000 48 H
read_block(): RX 5 bytes
0000 31 30 30 0d 0a 100..
pcr_read_block: RX 6 bytes
pcr_parse_answer: len = 6
rig_open: error = Protocol error

Best regards,
Igor
UB3TJR

[Igor (igovol)]

This PCR1000 strange behaviour was related to bad power source.
Please close this bug report.

Best regards,
Igor
UB3TJR