[ 33.106241] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0 [ 33.106246] bbswitch: Found discrete VGA device 0000:08:00.0: \_SB_.PCI0.RP05.PEGP [ 33.106254] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 33.106328] bbswitch: detected an Optimus _DSM function [ 33.106339] bbswitch: Succesfully loaded. Discrete card 0000:08:00.0 is on [ 34.335404] vgaarb: this pci device is not a vga device [ 34.335819] nvidia 0000:08:00.0: irq 66 for MSI/MSI-X [ 34.339875] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 34.339944] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 34.339985] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 34.340026] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 34.340063] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 34.340100] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 34.340156] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 34.340194] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 35.063231] wlan0: authenticate with 0c:d2:b5:45:26:14 [ 35.065584] wlan0: send auth to 0c:d2:b5:45:26:14 (try 1/3) [ 35.067434] wlan0: authenticated [ 35.069908] wlan0: associate with 0c:d2:b5:45:26:14 (try 1/3) [ 35.073959] wlan0: RX AssocResp from 0c:d2:b5:45:26:14 (capab=0x411 status=0 aid=2) [ 35.074678] wlan0: associated [ 35.074708] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 35.074760] cfg80211: Calling CRDA for country: MX [ 35.077292] cfg80211: Regulatory domain changed to country: MX [ 35.077295] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 35.077298] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 35.077300] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 35.077301] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2300 mBm) [ 35.077303] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 37.078696] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95) [ 37.576003] vgaarb: this pci device is not a vga device [ 60.576049] type=1400 audit(1467347336.985:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1734 comm="apparmor_parser" [ 60.576054] type=1400 audit(1467347336.985:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1734 comm="apparmor_parser" [ 60.576340] type=1400 audit(1467347336.985:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1734 comm="apparmor_parser" [ 62.507375] init: plymouth-stop pre-start process (1798) terminated with status 1 [ 65.751559] init: mysql post-start process (1128) terminated with status 1 [ 340.223253] vgaarb: this pci device is not a vga device [ 1186.906080] vgaarb: this pci device is not a vga device [ 1227.405789] systemd-hostnamed[3115]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 1236.051515] EXT4-fs (sda4): recovery complete [ 1236.483601] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 1765.348299] vgaarb: this pci device is not a vga device [ 3123.614916] vgaarb: this pci device is not a vga device [ 3143.435917] vgaarb: this pci device is not a vga device [ 3143.637774] wlan0: deauthenticating from 0c:d2:b5:45:26:14 by local choice (reason=3) [ 3143.644967] cfg80211: Calling CRDA to update world regulatory domain [ 3143.650207] cfg80211: World regulatory domain updated: [ 3143.650215] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3143.650220] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3143.650224] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3143.650228] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3143.650231] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3143.650234] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3143.751723] vgaarb: this pci device is not a vga device [ 3144.820365] usb 2-1: USB disconnect, device number 2 [ 3145.520252] PM: Syncing filesystems ... done. [ 3145.736206] PM: Preparing system for mem sleep [ 3145.921165] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 3145.922950] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3145.924094] PM: Entering mem sleep [ 3145.924466] Suspending console(s) (use no_console_suspend to debug) [ 3145.925520] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 3145.925569] sd 0:0:0:0: [sda] Stopping disk [ 3145.990913] psmouse serio1: Failed to disable mouse on isa0060/serio1 [ 3147.013801] PM: suspend of devices complete after 1088.256 msecs [ 3147.029834] PM: late suspend of devices complete after 16.016 msecs [ 3147.030247] r8169 0000:07:00.0: System wakeup enabled by ACPI [ 3147.061834] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 3147.093796] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 3147.110062] PM: noirq suspend of devices complete after 80.162 msecs [ 3147.110393] ACPI: Preparing to enter system sleep state S3 [ 3147.115150] PM: Saving platform NVS memory [ 3147.121012] Disabling non-boot CPUs ... [ 3147.122209] kvm: disabling virtualization on CPU1 [ 3147.122503] smpboot: CPU 1 is now offline [ 3147.123860] kvm: disabling virtualization on CPU2 [ 3147.225870] smpboot: CPU 2 is now offline [ 3147.226207] Broke affinity for irq 21 [ 3147.226213] Broke affinity for irq 60 [ 3147.226214] Broke affinity for irq 62 [ 3147.227221] kvm: disabling virtualization on CPU3 [ 3147.329952] smpboot: CPU 3 is now offline [ 3147.331603] ACPI: Low-level resume complete [ 3147.331654] PM: Restoring platform NVS memory [ 3147.333394] Enabling non-boot CPUs ... [ 3147.333425] x86: Booting SMP configuration: [ 3147.333426] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 3147.345428] kvm: enabling virtualization on CPU1 [ 3147.347726] CPU1 is up [ 3147.347740] smpboot: Booting Node 0 Processor 2 APIC 0x1 [ 3147.359726] kvm: enabling virtualization on CPU2 [ 3147.361985] CPU2 is up [ 3147.361996] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 3147.373978] kvm: enabling virtualization on CPU3 [ 3147.376232] CPU3 is up [ 3147.381374] ACPI: Waking up from system sleep state S3 [ 3147.471920] acpi LNXPOWER:04: Turning OFF [ 3147.517266] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 3147.565304] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 3147.613492] PM: noirq resume of devices complete after 141.434 msecs [ 3147.613778] PM: early resume of devices complete after 0.263 msecs [ 3147.613939] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X [ 3147.614111] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X [ 3147.614432] snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X [ 3147.625780] r8169 0000:07:00.0: System wakeup disabled by ACPI [ 3147.629962] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19 [ 3147.629964] PM: Device 00:06 failed to resume: error -19 [ 3147.885689] usb 2-5: reset high-speed USB device number 3 using xhci_hcd [ 3147.945567] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3147.949975] ata2.00: configured for UDMA/133 [ 3147.962133] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021f4c06c0 [ 3148.069914] usb 2-8: reset high-speed USB device number 4 using xhci_hcd [ 3148.085935] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021f503d80 [ 3148.085936] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021f503dc0 [ 3148.085937] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021f503e00 [ 3148.614184] i2c_designware INT3433:00: controller timed out [ 3148.746598] psmouse serio1: synaptics: device claims to have max coordinates query, but I'm not able to read it. [ 3148.812153] psmouse serio1: synaptics: device claims to have min coordinates query, but I'm not able to read it. [ 3148.830362] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3148.842875] ata1.00: configured for UDMA/133 [ 3148.858449] sd 0:0:0:0: [sda] Starting disk [ 3148.864957] PM: resume of devices complete after 1250.166 msecs [ 3148.865253] iwlwifi 0000:06:00.0: no hotplug settings from platform [ 3148.865291] r8169 0000:07:00.0: no hotplug settings from platform [ 3148.865359] nvidia 0000:08:00.0: no hotplug settings from platform [ 3148.865725] pci_bus 0000:04: Allocating resources [ 3148.865734] pci_bus 0000:06: Allocating resources [ 3148.865754] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 06] add_size 1000 [ 3148.865756] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 [ 3148.865760] pci_bus 0000:07: Allocating resources [ 3148.865772] pci_bus 0000:08: Allocating resources [ 3148.865781] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3148.865784] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 3148.865785] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 3148.865787] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xcfc00000-0xcfdfffff 64bit pref] [ 3148.865790] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff] [ 3148.865795] pci 0000:00:00.0: no hotplug settings from platform [ 3148.865796] pci 0000:00:00.0: using default PCI settings [ 3148.865800] i915 0000:00:02.0: no hotplug settings from platform [ 3148.865801] i915 0000:00:02.0: using default PCI settings [ 3148.865804] snd_hda_intel 0000:00:03.0: no hotplug settings from platform [ 3148.865807] xhci_hcd 0000:00:14.0: no hotplug settings from platform [ 3148.865807] xhci_hcd 0000:00:14.0: using default PCI settings [ 3148.865813] mei_me 0000:00:16.0: no hotplug settings from platform [ 3148.865813] mei_me 0000:00:16.0: using default PCI settings [ 3148.865819] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform [ 3148.865820] snd_hda_intel 0000:00:1b.0: using default PCI settings [ 3148.865825] pcieport 0000:00:1c.0: no hotplug settings from platform [ 3148.865827] pcieport 0000:00:1c.2: no hotplug settings from platform [ 3148.865842] iwlwifi 0000:06:00.0: no hotplug settings from platform [ 3148.865844] pcieport 0000:00:1c.3: no hotplug settings from platform [ 3148.865853] r8169 0000:07:00.0: no hotplug settings from platform [ 3148.865855] pcieport 0000:00:1c.4: no hotplug settings from platform [ 3148.865860] nvidia 0000:08:00.0: no hotplug settings from platform [ 3148.865863] ehci-pci 0000:00:1d.0: no hotplug settings from platform [ 3148.865864] ehci-pci 0000:00:1d.0: using default PCI settings [ 3148.865870] lpc_ich 0000:00:1f.0: no hotplug settings from platform [ 3148.865871] lpc_ich 0000:00:1f.0: using default PCI settings [ 3148.865878] ahci 0000:00:1f.2: no hotplug settings from platform [ 3148.865879] ahci 0000:00:1f.2: using default PCI settings [ 3148.865884] pci 0000:00:1f.3: no hotplug settings from platform [ 3148.865885] pci 0000:00:1f.3: using default PCI settings [ 3148.866135] pci_bus 0000:04: Allocating resources [ 3148.866143] pci_bus 0000:06: Allocating resources [ 3148.866164] pci_bus 0000:07: Allocating resources [ 3148.866179] pci_bus 0000:08: Allocating resources [ 3148.866187] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3148.866192] pci 0000:00:00.0: no hotplug settings from platform [ 3148.866193] pci 0000:00:00.0: using default PCI settings [ 3148.866196] i915 0000:00:02.0: no hotplug settings from platform [ 3148.866197] i915 0000:00:02.0: using default PCI settings [ 3148.866201] snd_hda_intel 0000:00:03.0: no hotplug settings from platform [ 3148.866203] xhci_hcd 0000:00:14.0: no hotplug settings from platform [ 3148.866204] xhci_hcd 0000:00:14.0: using default PCI settings [ 3148.866209] mei_me 0000:00:16.0: no hotplug settings from platform [ 3148.866209] mei_me 0000:00:16.0: using default PCI settings [ 3148.866215] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform [ 3148.866216] snd_hda_intel 0000:00:1b.0: using default PCI settings [ 3148.866221] pcieport 0000:00:1c.0: no hotplug settings from platform [ 3148.866223] pcieport 0000:00:1c.2: no hotplug settings from platform [ 3148.866238] iwlwifi 0000:06:00.0: no hotplug settings from platform [ 3148.866240] pcieport 0000:00:1c.3: no hotplug settings from platform [ 3148.866248] r8169 0000:07:00.0: no hotplug settings from platform [ 3148.866250] pcieport 0000:00:1c.4: no hotplug settings from platform [ 3148.866255] nvidia 0000:08:00.0: no hotplug settings from platform [ 3148.866258] ehci-pci 0000:00:1d.0: no hotplug settings from platform [ 3148.866258] ehci-pci 0000:00:1d.0: using default PCI settings [ 3148.866264] lpc_ich 0000:00:1f.0: no hotplug settings from platform [ 3148.866265] lpc_ich 0000:00:1f.0: using default PCI settings [ 3148.866273] ahci 0000:00:1f.2: no hotplug settings from platform [ 3148.866273] ahci 0000:00:1f.2: using default PCI settings [ 3148.866278] pci 0000:00:1f.3: no hotplug settings from platform [ 3148.866279] pci 0000:00:1f.3: using default PCI settings [ 3148.866290] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root [ 3148.866305] PM: Finishing wakeup. [ 3148.866306] Restarting tasks ... done. [ 3148.884190] psmouse serio1: synaptics: Unable to initialize device. [ 3148.993631] video LNXVIDEO:00: Restoring backlight state [ 3148.993645] video LNXVIDEO:01: Restoring backlight state [ 3149.294019] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled [ 3149.294258] iwlwifi 0000:06:00.0: L1 Enabled - LTR Enabled [ 3149.307703] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3149.483971] r8169 0000:07:00.0 eth0: link down [ 3149.484012] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3153.142782] wlan0: authenticate with 3c:1e:04:34:6e:1d [ 3153.144648] wlan0: send auth to 3c:1e:04:34:6e:1d (try 1/3) [ 3153.147305] wlan0: authenticated [ 3153.149769] wlan0: associate with 3c:1e:04:34:6e:1d (try 1/3) [ 3153.154217] wlan0: RX AssocResp from 3c:1e:04:34:6e:1d (capab=0x411 status=0 aid=4) [ 3153.154640] wlan0: associated [ 3153.154657] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3285.351037] usb 2-1: new low-speed USB device number 5 using xhci_hcd [ 3285.372192] usb 2-1: New USB device found, idVendor=1a2c, idProduct=0042 [ 3285.372201] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3285.372206] usb 2-1: Product: Usb Mouse [ 3285.372210] usb 2-1: Manufacturer: SEMICCHIP [ 3285.372474] usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3285.375381] input: SEMICCHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input20 [ 3285.375753] hid-generic 0003:1A2C:0042.0003: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-0000:00:14.0-1/input0 [ 5159.230339] vgaarb: this pci device is not a vga device [ 6376.769272] vgaarb: this pci device is not a vga device [ 7122.364546] vgaarb: this pci device is not a vga device [ 7203.752403] vgaarb: this pci device is not a vga device [ 7301.521557] vgaarb: this pci device is not a vga device [13859.845235] vgaarb: this pci device is not a vga device [14202.099385] vgaarb: this pci device is not a vga device [15013.703861] vgaarb: this pci device is not a vga device [15284.122143] perf samples too long (2528 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [17308.467791] systemd-hostnamed[10248]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [18025.170652] vgaarb: this pci device is not a vga device [18134.187781] vgaarb: this pci device is not a vga device [19015.969682] usb 2-3: new high-speed USB device number 6 using xhci_hcd [19015.986631] usb 2-3: New USB device found, idVendor=0781, idProduct=5567 [19015.986640] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [19015.986645] usb 2-3: Product: Cruzer Blade [19015.986649] usb 2-3: Manufacturer: SanDisk [19015.986652] usb 2-3: SerialNumber: 4C532000040623105350 [19016.110642] usb-storage 2-3:1.0: USB Mass Storage device detected [19016.110703] scsi5 : usb-storage 2-3:1.0 [19016.110756] usbcore: registered new interface driver usb-storage [19017.111649] scsi 5:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 6 [19017.111997] sd 5:0:0:0: Attached scsi generic sg3 type 0 [19017.113169] sd 5:0:0:0: [sdc] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB) [19017.115938] sd 5:0:0:0: [sdc] Write Protect is off [19017.115946] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00 [19017.116218] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [19017.138175] sdc: sdc1 [19017.139415] sd 5:0:0:0: [sdc] Attached SCSI disk [19017.492172] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [19018.785885] systemd-hostnamed[13157]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [19180.631142] usb 2-1: USB disconnect, device number 5 [19190.742789] usb 2-1: new low-speed USB device number 7 using xhci_hcd [19190.764027] usb 2-1: New USB device found, idVendor=1a2c, idProduct=0042 [19190.764036] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [19190.764041] usb 2-1: Product: Usb Mouse [19190.764045] usb 2-1: Manufacturer: SEMICCHIP [19190.764322] usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [19190.767173] input: SEMICCHIP Usb Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input21 [19190.767528] hid-generic 0003:1A2C:0042.0004: input,hidraw0: USB HID v1.10 Mouse [SEMICCHIP Usb Mouse] on usb-0000:00:14.0-1/input0 [20635.029372] init: upstart-udev-bridge main process (307) terminated with status 1 [20635.029385] init: upstart-udev-bridge main process ended, respawning [20635.029509] init: upstart-socket-bridge main process (482) terminated with status 1 [20635.029517] init: upstart-socket-bridge main process ended, respawning [20635.029592] init: upstart-file-bridge main process (703) terminated with status 1 [20635.029597] init: upstart-file-bridge main process ended, respawning [20639.519686] init: upstart-file-bridge main process (16022) terminated with status 1 [20639.519696] init: upstart-file-bridge main process ended, respawning [20639.519776] init: upstart-udev-bridge main process (16025) terminated with status 1 [20639.519780] init: upstart-udev-bridge main process ended, respawning [20639.519834] init: upstart-socket-bridge main process (16028) terminated with status 1 [20639.519838] init: upstart-socket-bridge main process ended, respawning [20833.843643] vgaarb: this pci device is not a vga device [20898.819499] init: upstart-udev-bridge main process (16124) terminated with status 1 [20898.819506] init: upstart-udev-bridge main process ended, respawning [20898.819597] init: upstart-socket-bridge main process (16132) terminated with status 1 [20898.819604] init: upstart-socket-bridge main process ended, respawning [20898.819700] init: upstart-file-bridge main process (16135) terminated with status 1 [20898.819708] init: upstart-file-bridge main process ended, respawning [20899.258571] init: upstart-file-bridge main process (30490) terminated with status 1 [20899.258583] init: upstart-file-bridge main process ended, respawning [20899.258703] init: upstart-socket-bridge main process (30491) terminated with status 1 [20899.258709] init: upstart-socket-bridge main process ended, respawning [20899.258772] init: upstart-udev-bridge main process (30498) terminated with status 1 [20899.258776] init: upstart-udev-bridge main process ended, respawning [20900.490642] init: upstart-udev-bridge main process (30535) terminated with status 1 [20900.490654] init: upstart-udev-bridge main process ended, respawning [20900.490796] init: upstart-socket-bridge main process (30539) terminated with status 1 [20900.490804] init: upstart-socket-bridge main process ended, respawning [20900.490887] init: upstart-file-bridge main process (30542) terminated with status 1 [20900.490892] init: upstart-file-bridge main process ended, respawning [20902.044578] init: upstart-udev-bridge main process (30577) terminated with status 1 [20902.044586] init: upstart-udev-bridge main process ended, respawning [20902.044670] init: upstart-file-bridge main process (30581) terminated with status 1 [20902.044676] init: upstart-file-bridge main process ended, respawning [20902.044739] init: upstart-socket-bridge main process (30586) terminated with status 1 [20902.044744] init: upstart-socket-bridge main process ended, respawning [20902.749333] init: upstart-udev-bridge main process (30630) terminated with status 1 [20902.749344] init: upstart-udev-bridge main process ended, respawning [20902.749429] init: upstart-file-bridge main process (30634) terminated with status 1 [20902.749433] init: upstart-file-bridge main process ended, respawning [20902.749490] init: upstart-socket-bridge main process (30637) terminated with status 1 [20902.749494] init: upstart-socket-bridge main process ended, respawning [20903.412214] init: upstart-udev-bridge main process (30668) terminated with status 1 [20903.412223] init: upstart-udev-bridge main process ended, respawning [20903.412317] init: upstart-socket-bridge main process (30672) terminated with status 1 [20903.412325] init: upstart-socket-bridge main process ended, respawning [20903.412409] init: upstart-file-bridge main process (30675) terminated with status 1 [20903.412415] init: upstart-file-bridge main process ended, respawning [20906.263547] systemd-udevd[30808]: starting version 204 [20921.035937] type=1400 audit(1467373614.135:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=31018 comm="apparmor_parser" [20921.036173] type=1400 audit(1467373614.135:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=31018 comm="apparmor_parser" [20921.154681] type=1400 audit(1467373614.251:78): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=31055 comm="apparmor_parser" [20921.154686] type=1400 audit(1467373614.251:79): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=31055 comm="apparmor_parser" [20921.154959] type=1400 audit(1467373614.251:80): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=31055 comm="apparmor_parser" [20955.485423] init: samba-ad-dc main process (32150) terminated with status 1 [21871.319856] vgaarb: this pci device is not a vga device [21903.304478] systemd-hostnamed[6387]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [22313.973230] sr 1:0:0:0: [sr0] [22313.973233] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [22313.973234] sr 1:0:0:0: [sr0] [22313.973235] Sense Key : Not Ready [current] [22313.973237] sr 1:0:0:0: [sr0] [22313.973239] Add. Sense: Medium not present - tray closed [22313.973240] sr 1:0:0:0: [sr0] CDB: [22313.973241] Read(10): 28 00 00 00 00 00 00 00 08 00 [22313.973245] end_request: I/O error, dev sr0, sector 0 [22313.973248] Buffer I/O error on device sr0, logical block 0 [22313.973250] Buffer I/O error on device sr0, logical block 1 [22313.973251] Buffer I/O error on device sr0, logical block 2 [22313.973252] Buffer I/O error on device sr0, logical block 3 [22313.973253] Buffer I/O error on device sr0, logical block 4 [22313.973254] Buffer I/O error on device sr0, logical block 5 [22313.973254] Buffer I/O error on device sr0, logical block 6 [22313.973255] Buffer I/O error on device sr0, logical block 7 [22313.973259] Buffer I/O error on device sr0, logical block 8 [22313.973260] Buffer I/O error on device sr0, logical block 9 [22313.973271] sr 1:0:0:0: [sr0] unaligned transfer [22313.973278] sr 1:0:0:0: [sr0] unaligned transfer [22313.973281] sr 1:0:0:0: [sr0] unaligned transfer [22313.973284] sr 1:0:0:0: [sr0] unaligned transfer [22313.973287] sr 1:0:0:0: [sr0] unaligned transfer [22313.973289] sr 1:0:0:0: [sr0] unaligned transfer [22313.973291] sr 1:0:0:0: [sr0] unaligned transfer [22313.973293] sr 1:0:0:0: [sr0] unaligned transfer [22313.987510] sr 1:0:0:0: [sr0] [22313.987513] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [22313.987515] sr 1:0:0:0: [sr0] [22313.987516] Sense Key : Not Ready [current] [22313.987520] sr 1:0:0:0: [sr0] [22313.987522] Add. Sense: Medium not present - tray closed [22313.987524] sr 1:0:0:0: [sr0] CDB: [22313.987525] Read(10): 28 00 00 00 00 00 00 00 08 00 [22313.987532] end_request: I/O error, dev sr0, sector 0 [22313.987550] sr 1:0:0:0: [sr0] unaligned transfer [22313.987561] sr 1:0:0:0: [sr0] unaligned transfer [22313.987566] sr 1:0:0:0: [sr0] unaligned transfer [22313.987571] sr 1:0:0:0: [sr0] unaligned transfer [22313.987574] sr 1:0:0:0: [sr0] unaligned transfer [22313.987578] sr 1:0:0:0: [sr0] unaligned transfer [22313.987582] sr 1:0:0:0: [sr0] unaligned transfer [22313.987585] sr 1:0:0:0: [sr0] unaligned transfer [25742.617337] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) [25742.617339] CPU2: Core temperature above threshold, cpu clock throttled (total events = 1) [25742.617340] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1) [25742.617341] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) [25742.617342] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) [25742.617343] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) [25742.619351] CPU0: Core temperature/speed normal [25742.619352] CPU2: Core temperature/speed normal [25742.619353] CPU3: Package temperature/speed normal [25742.619354] CPU1: Package temperature/speed normal [25742.619355] CPU2: Package temperature/speed normal [25742.619360] CPU0: Package temperature/speed normal [25820.878248] mce: [Hardware Error]: Machine check events logged