[   28.923998] ahci 0000:00:1f.2: port does not support device sleep
[   29.752886] ip_tables: (C) 2000-2006 Netfilter Core Team
[   29.777397] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   29.789926] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   29.817915] Ebtables v2.0 registered
[   29.829780] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   30.988553] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   30.993190] vboxdrv: Found 4 processor cores
[   31.013391] vboxdrv: TSC mode is Invariant, tentative frequency 2693695609 Hz
[   31.013395] vboxdrv: Successfully loaded version 5.0.18 (interface 0x00240000)
[   31.216242] VBoxNetFlt: Successfully started.
[   31.217677] VBoxNetAdp: Successfully started.
[   31.219070] VBoxPciLinuxInit
[   31.220922] vboxpci: IOMMU not found (not registered)
[   32.425957] PM: Syncing filesystems ... done.
[   32.446112] PM: Preparing system for sleep (mem)
[   32.446562] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   32.447849] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   32.448937] PM: Suspending system (mem)
[   32.448950] Suspending console(s) (use no_console_suspend to debug)
[   32.449190] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[   32.450895] sd 1:0:0:0: [sda] Stopping disk
[   32.467024] parport_pc 00:08: disabled
[   32.467106] serial 00:07: disabled
[   32.467109] serial 00:07: System wakeup disabled by ACPI
[   32.468055] e1000e: EEE TX LPI TIMER: 00000011
[   32.468150] Removing pn544
[   33.817170] PM: suspend of devices complete after 1368.172 msecs
[   33.841135] PM: late suspend of devices complete after 23.962 msecs
[   33.845437] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[   33.845699] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[   33.845702] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[   33.863164] PM: noirq suspend of devices complete after 22.028 msecs
[   33.863436] ACPI: Preparing to enter system sleep state S3
[   33.881162] ACPI : EC: EC stopped
[   33.881163] PM: Saving platform NVS memory
[   33.881167] Disabling non-boot CPUs ...
[   33.882362] smpboot: CPU 1 is now offline
[   33.894470] smpboot: CPU 2 is now offline
[   33.906398] smpboot: CPU 3 is now offline
[   33.926491] ACPI: Low-level resume complete
[   33.926549] ACPI : EC: EC started
[   33.926550] PM: Restoring platform NVS memory
[   33.926901] Enabling non-boot CPUs ...
[   33.946792] x86: Booting SMP configuration:
[   33.946793] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   33.950225]  cache: parent cpu1 should not be sleeping
[   33.950340] CPU1 is up
[   33.966830] smpboot: Booting Node 0 Processor 2 APIC 0x1
[   33.970188]  cache: parent cpu2 should not be sleeping
[   33.970303] CPU2 is up
[   33.986787] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   33.990145]  cache: parent cpu3 should not be sleeping
[   33.990228] CPU3 is up
[   33.993542] ACPI: Waking up from system sleep state S3
[   34.724501] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[   34.724512] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[   34.727579] PM: noirq resume of devices complete after 20.508 msecs
[   34.734004] PM: early resume of devices complete after 6.408 msecs
[   34.734114] usb usb2: root hub lost power or was reset
[   34.734115] usb usb3: root hub lost power or was reset
[   34.746623] sd 1:0:0:0: [sda] Starting disk
[   34.757553] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[   34.757788] Probing NFC pn544
[   34.809310] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[   34.820459] rtc_cmos 00:02: System wakeup disabled by ACPI
[   34.820657] serial 00:07: activated
[   34.824549] parport_pc 00:08: activated
[   34.962609] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[   35.118599] ata1: SATA link down (SStatus 0 SControl 300)
[   35.126598] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   35.128718] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[   35.129000] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[   35.129033] ata2.00: configured for UDMA/133
[   35.129047] ahci 0000:00:1f.2: port does not support device sleep
[   35.138702] usb 2-4: reset high-speed USB device number 3 using xhci_hcd
[   35.374582] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
[   37.415654] PM: resume of devices complete after 2681.818 msecs
[   37.416084] PM: Finishing wakeup.
[   37.416085] Restarting tasks ... 
[   37.418221] pci_bus 0000:01: Allocating resources
[   37.418234] pci_bus 0000:02: Allocating resources
[   37.418299] pci_bus 0000:03: Allocating resources
[   37.418312] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.418656] usb 2-1: USB disconnect, device number 2
[   37.418660] usb 2-1.3: USB disconnect, device number 4
[   37.418783] usb 3-3: USB disconnect, device number 2
[   37.418991] pci_bus 0000:01: Allocating resources
[   37.419003] pci_bus 0000:02: Allocating resources
[   37.419068] pci_bus 0000:03: Allocating resources
[   37.420847] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.421302] pci_bus 0000:01: Allocating resources
[   37.421315] pci_bus 0000:02: Allocating resources
[   37.421380] pci_bus 0000:03: Allocating resources
[   37.421391] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.426040] usb 2-6: USB disconnect, device number 5
[   37.426044] usb 2-6.1: USB disconnect, device number 6
[   37.427442] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.427474] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.427521] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.427733] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.427746] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.427811] acpi device:40: Cannot transition to power state D3hot for parent in (unknown)
[   37.427867] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.427958] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   37.428310] acpi PNP0401:00: Already enumerated
[   37.428613] acpi PNP0501:00: Still not present
[   37.428930] acpi PNP0401:00: Already enumerated
[   37.429254] acpi PNP0501:00: Still not present
[   37.429324] Bluetooth: hci0: read Intel version: 370710018002030d00
[   37.429327] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[   37.436591] done.
[   37.634319] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[   38.049439] ACPI Error: Index value 0x0000000000000083 overflows field width 0x7 (20150930/exfldio-341)
[   38.049445] ACPI Error: Method parse/execution failed [\NEVT] (Node ffff88040e0cb258), AE_AML_REGISTER_LIMIT (20150930/psparse-542)
[   38.049451] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECDV._Q66] (Node ffff88040e0c9b90), AE_AML_REGISTER_LIMIT (20150930/psparse-542)
[   38.058620] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
[   38.060190] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   38.060518] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   38.193743] init: plymouth-upstart-bridge main process ended, respawning
[   38.200505] init: plymouth-upstart-bridge main process (3203) terminated with status 1
[   38.200514] init: plymouth-upstart-bridge main process ended, respawning
[   38.283890] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   38.284218] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   38.300706] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   61.024905] usb 2-1: new high-speed USB device number 7 using xhci_hcd
[   61.065566] atkbd_interrupt: 159 callbacks suppressed
[   61.065570] atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying to access hardware directly.
[   61.070674] acpi PNP0401:00: Already enumerated
[   61.070921] acpi PNP0501:00: Already enumerated
[   61.152990] usb 2-1: New USB device found, idVendor=413c, idProduct=2513
[   61.152994] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   61.153288] hub 2-1:1.0: USB hub found
[   61.153346] hub 2-1:1.0: 3 ports detected
[   61.424903] usb 2-1.3: new low-speed USB device number 8 using xhci_hcd
[   61.487103] pci_bus 0000:01: Allocating resources
[   61.487116] pci_bus 0000:02: Allocating resources
[   61.487180] pci_bus 0000:03: Allocating resources
[   61.487191] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   61.488110] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   61.488130] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   61.488167] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   61.488329] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   61.488338] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   61.488383] acpi device:40: Cannot transition to power state D3hot for parent in (unknown)
[   61.488424] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   61.488492] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   61.536053] usb 2-1.3: New USB device found, idVendor=413c, idProduct=2107
[   61.536057] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   61.536058] usb 2-1.3: Product: Dell USB Entry Keyboard
[   61.536059] usb 2-1.3: Manufacturer: Dell
[   61.536159] usb 2-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[   61.539925] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1.3/2-1.3:1.0/0003:413C:2107.0003/input/input19
[   61.552910] usb 3-3: new SuperSpeed USB device number 3 using xhci_hcd
[   61.569211] usb 3-3: New USB device found, idVendor=413c, idProduct=5534
[   61.569215] usb 3-3: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[   61.569216] usb 3-3: Product: USB5534
[   61.569218] usb 3-3: Manufacturer: SMSC
[   61.570232] hub 3-3:1.0: USB hub found
[   61.570272] hub 3-3:1.0: 3 ports detected
[   61.593119] hid-generic 0003:413C:2107.0003: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-1.3/input0
[   61.720873] usb 2-6: new high-speed USB device number 9 using xhci_hcd
[   61.849158] usb 2-6: New USB device found, idVendor=413c, idProduct=2134
[   61.849162] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   61.849163] usb 2-6: Product: USB2134
[   61.849165] usb 2-6: Manufacturer: SMSC
[   61.849580] hub 2-6:1.0: USB hub found
[   61.849639] hub 2-6:1.0: 3 ports detected
[   62.006544] pci_bus 0000:01: Allocating resources
[   62.006558] pci_bus 0000:02: Allocating resources
[   62.006623] pci_bus 0000:03: Allocating resources
[   62.006637] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   62.008148] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   62.008183] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   62.008239] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   62.008495] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   62.008512] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   62.008590] acpi device:40: Cannot transition to power state D3hot for parent in (unknown)
[   62.008658] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   62.008761] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   62.104919] e1000e: em1 NIC Link is Down
[   62.120848] usb 2-6.1: new low-speed USB device number 10 using xhci_hcd
[   62.212627] usb 2-6.1: New USB device found, idVendor=046d, idProduct=c077
[   62.212631] usb 2-6.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   62.212634] usb 2-6.1: Product: USB Optical Mouse
[   62.212636] usb 2-6.1: Manufacturer: Logitech
[   62.212766] usb 2-6.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[   62.214878] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6.1/2-6.1:1.0/0003:046D:C077.0004/input/input20
[   62.269008] hid-generic 0003:046D:C077.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-6.1/input0
[   70.227247] PM: Syncing filesystems ... done.
[   70.237561] PM: Preparing system for sleep (mem)
[   70.237868] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   70.239319] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   70.240358] PM: Suspending system (mem)
[   70.240371] Suspending console(s) (use no_console_suspend to debug)
[   70.240619] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[   70.240827] sd 1:0:0:0: [sda] Stopping disk
[   70.259557] parport_pc 00:08: disabled
[   70.259962] ACPI Error: Index value 0x0000000000000083 overflows field width 0x7 (20150930/exfldio-341)
[   70.259965] ACPI Error: Method parse/execution failed [\NEVT] (Node ffff88040e0cb258), AE_AML_REGISTER_LIMIT (20150930/psparse-542)
[   70.259969] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECDV._Q66] (Node ffff88040e0c9b90), AE_AML_REGISTER_LIMIT (20150930/psparse-542)
[   70.260019] serial 00:07: disabled
[   70.260022] serial 00:07: System wakeup disabled by ACPI
[   70.260101] e1000e: EEE TX LPI TIMER: 00000011
[   70.260180] Removing pn544
[   70.572916] PM: suspend of devices complete after 332.440 msecs
[   70.596323] PM: late suspend of devices complete after 23.395 msecs
[   70.600495] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[   70.600821] e1000e 0000:00:19.0: System wakeup enabled by ACPI
[   70.600824] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[   70.618359] PM: noirq suspend of devices complete after 22.035 msecs
[   70.618630] ACPI: Preparing to enter system sleep state S3
[   70.636424] ACPI : EC: EC stopped
[   70.636425] PM: Saving platform NVS memory
[   70.636429] Disabling non-boot CPUs ...
[   70.637633] smpboot: CPU 1 is now offline
[   70.649773] smpboot: CPU 2 is now offline
[   70.661678] smpboot: CPU 3 is now offline
[   70.673780] ACPI: Low-level resume complete
[   70.673837] ACPI : EC: EC started
[   70.673837] PM: Restoring platform NVS memory
[   70.674184] Enabling non-boot CPUs ...
[   70.694043] x86: Booting SMP configuration:
[   70.694044] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   70.697470]  cache: parent cpu1 should not be sleeping
[   70.697587] CPU1 is up
[   70.714081] smpboot: Booting Node 0 Processor 2 APIC 0x1
[   70.717444]  cache: parent cpu2 should not be sleeping
[   70.717561] CPU2 is up
[   70.734034] smpboot: Booting Node 0 Processor 3 APIC 0x3
[   70.737396]  cache: parent cpu3 should not be sleeping
[   70.737481] CPU3 is up
[   70.740787] ACPI: Waking up from system sleep state S3
[   71.631762] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[   71.631836] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[   71.634173] PM: noirq resume of devices complete after 19.886 msecs
[   71.640007] PM: early resume of devices complete after 5.818 msecs
[   71.642372] sd 1:0:0:0: [sda] Starting disk
[   71.646204] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[   71.653283] mei_me 0000:00:16.0: NFC MEI VERSION: IVN 0x1 Vendor ID 0x1 Type 0x1
[   71.653505] Probing NFC pn544
[   71.657080] rtc_cmos 00:02: System wakeup disabled by ACPI
[   71.657344] serial 00:07: activated
[   71.661599] parport_pc 00:08: activated
[   71.680956] xhci_hcd 0000:00:14.0: port 5 resume PLC timeout
[   71.858058] usb 3-3: reset SuperSpeed USB device number 3 using xhci_hcd
[   71.873848] usb 1-1.3: reset full-speed USB device number 3 using ehci-pci
[   71.906021] usb 2-4: reset high-speed USB device number 3 using xhci_hcd
[   71.965834] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   71.967886] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[   71.968233] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[   71.968263] ata2.00: configured for UDMA/133
[   71.968275] ahci 0000:00:1f.2: port does not support device sleep
[   71.977839] ata1: SATA link down (SStatus 0 SControl 300)
[   72.109082] ACPI Error: Index value 0x0000000000000083 overflows field width 0x7 (20150930/exfldio-341)
[   72.109086] ACPI Error: Method parse/execution failed [\NEVT] (Node ffff88040e0cb258), AE_AML_REGISTER_LIMIT (20150930/psparse-542)
[   72.109089] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECDV._Q66] (Node ffff88040e0c9b90), AE_AML_REGISTER_LIMIT (20150930/psparse-542)
[   72.262017] usb 2-6: reset high-speed USB device number 9 using xhci_hcd
[   72.501961] usb 2-1: reset high-speed USB device number 7 using xhci_hcd
[   72.889980] usb 2-6.1: reset low-speed USB device number 10 using xhci_hcd
[   73.167330] usb 2-6.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[   73.425905] usb 2-1.3: reset low-speed USB device number 8 using xhci_hcd
[   73.704618] usb 2-1.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[   73.709151] PM: resume of devices complete after 2069.274 msecs
[   73.709590] PM: Finishing wakeup.
[   73.709591] Restarting tasks ... 
[   73.711766] pci_bus 0000:01: Allocating resources
[   73.711778] pci_bus 0000:02: Allocating resources
[   73.711843] pci_bus 0000:03: Allocating resources
[   73.711855] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.712103] done.
[   73.716693] pci_bus 0000:01: Allocating resources
[   73.716708] pci_bus 0000:02: Allocating resources
[   73.716777] pci_bus 0000:03: Allocating resources
[   73.718573] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.722278] Bluetooth: hci0: read Intel version: 370710018002030d00
[   73.722324] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[   73.724387] pci_bus 0000:01: Allocating resources
[   73.724400] pci_bus 0000:02: Allocating resources
[   73.724466] pci_bus 0000:03: Allocating resources
[   73.724480] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.736019] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.736045] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.736083] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.736245] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.736255] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.736301] acpi device:40: Cannot transition to power state D3hot for parent in (unknown)
[   73.736343] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.736412] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[   73.736690] acpi PNP0401:00: Already enumerated
[   73.736934] acpi PNP0501:00: Already enumerated
[   73.927301] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[   74.053941] IPv6: ADDRCONF(NETDEV_UP): em1: link is not ready
[   74.054720] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   74.055094] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   74.274340] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   74.274666] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[   74.296858] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   76.907321] e1000e: em1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   76.907349] IPv6: ADDRCONF(NETDEV_CHANGE): em1: link becomes ready
[   78.451116] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[   78.502976] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   82.016741] ACPI Error: Index value 0x0000000000000083 overflows field width 0x7 (20150930/exfldio-341)
[   82.016746] ACPI Error: Method parse/execution failed [\NEVT] (Node ffff88040e0cb258), AE_AML_REGISTER_LIMIT (20150930/psparse-542)
[   82.016751] ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.ECDV._Q66] (Node ffff88040e0c9b90), AE_AML_REGISTER_LIMIT (20150930/psparse-542)
[  121.828953] capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[  124.337276] SUPR0GipMap: fGetGipCpu=0x3
[  124.742629] vboxdrv: ffffffffc0b2e020 VMMR0.r0
[  124.977885] vboxdrv: ffffffffc0c28020 VBoxDDR0.r0
[  124.979790] vboxdrv: ffffffffc0008020 VBoxDD2R0.r0
[ 1255.999791] init: systemd-logind main process (734) killed by TERM signal
[ 1336.562110] systemd-udevd[8786]: starting version 204
[ 1358.493715] audit: type=1400 audit(1461165072.295:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/ntpd" pid=9410 comm="apparmor_parser"
[ 1385.216067] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 1385.221740] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1385.231589] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[ 1385.244505] QNX4 filesystem 0.2.3 registered.
[ 1385.315912] raid6: sse2x1   gen()  9900 MB/s
[ 1385.383901] raid6: sse2x1   xor()  7731 MB/s
[ 1385.451917] raid6: sse2x2   gen() 12634 MB/s
[ 1385.519894] raid6: sse2x2   xor()  8395 MB/s
[ 1385.587901] raid6: sse2x4   gen() 14608 MB/s
[ 1385.655899] raid6: sse2x4   xor() 10155 MB/s
[ 1385.723878] raid6: avx2x1   gen() 19315 MB/s
[ 1385.791889] raid6: avx2x2   gen() 22449 MB/s
[ 1385.859872] raid6: avx2x4   gen() 25567 MB/s
[ 1385.859874] raid6: using algorithm avx2x4 gen() 25567 MB/s
[ 1385.859875] raid6: using avx2x2 recovery algorithm
[ 1385.860939] xor: automatically using best checksumming function:
[ 1385.899865]    avx       : 31961.000 MB/sec
[ 1385.908860] Btrfs loaded
[43190.524103] perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[54500.685304] audit: type=1400 audit(1461218217.539:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=8465 comm="apparmor_parser"
[54500.685520] audit: type=1400 audit(1461218217.539:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=8465 comm="apparmor_parser"