[    3.478044] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    3.701735] vboxdrv: module verification failed: signature and/or  required key missing - tainting kernel
[    3.704063] vboxdrv: Found 4 processor cores
[    3.722784] vboxdrv: TSC mode is Invariant, tentative frequency 3399013622 Hz
[    3.722786] vboxdrv: Successfully loaded version 5.0.14 (interface 0x00240000)
[    3.767793] init: plymouth-upstart-bridge main process ended, respawning
[    3.771462] init: plymouth-upstart-bridge main process (1705) terminated with status 1
[    3.771469] init: plymouth-upstart-bridge main process ended, respawning
[    3.782044] cgroup: systemd-logind (582) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[    3.782046] cgroup: "memory" requires setting use_hierarchy to 1 on the root
[    3.924858] VBoxNetFlt: Successfully started.
[    3.925898] VBoxNetAdp: Successfully started.
[    3.927510] VBoxPciLinuxInit
[    3.929067] vboxpci: IOMMU not found (not registered)
[    4.749761] aufs 3.x-rcN-20150105
[    4.864853] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    4.865848] Bridge firewalling registered
[    4.869448] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    4.878959] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.978306] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[    5.083459] init: plymouth-stop pre-start process (2496) terminated with status 1
[   13.325068] ata3.00: exception Emask 0x10 SAct 0x18 SErr 0x400100 action 0x6 frozen
[   13.325071] ata3.00: irq_stat 0x08000000, interface fatal error
[   13.325073] ata3: SError: { UnrecovData Handshk }
[   13.325075] ata3.00: failed command: READ FPDMA QUEUED
[   13.325077] ata3.00: cmd 60/08:18:80:8a:82/00:00:10:00:00/40 tag 3 ncq 4096 in
[   13.325077]          res 40/00:20:70:2c:c4/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   13.325078] ata3.00: status: { DRDY }
[   13.325079] ata3.00: failed command: WRITE FPDMA QUEUED
[   13.325082] ata3.00: cmd 61/58:20:70:2c:c4/00:00:0e:00:00/40 tag 4 ncq 45056 out
[   13.325082]          res 40/00:20:70:2c:c4/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[   13.325083] ata3.00: status: { DRDY }
[   13.325085] ata3: hard resetting link
[   13.644639] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   13.646291] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   13.646294] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   13.646295] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   13.646513] ata3.00: supports DRM functions and may not be fully accessible
[   13.646673] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[   13.647088] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   13.647090] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   13.647091] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   13.647276] ata3.00: supports DRM functions and may not be fully accessible
[   13.647336] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[   13.647426] ata3.00: configured for UDMA/133
[   13.647523] ata3: EH complete
[   18.628799] systemd-hostnamed[3350]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[   26.256817] capability: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[   37.312046] ata3.00: exception Emask 0x10 SAct 0x1e SErr 0x400100 action 0x6 frozen
[   37.312051] ata3.00: irq_stat 0x08000000, interface fatal error
[   37.312063] ata3: SError: { UnrecovData Handshk }
[   37.312064] ata3.00: failed command: WRITE FPDMA QUEUED
[   37.312067] ata3.00: cmd 61/80:08:00:08:4a/4a:00:0d:00:00/40 tag 1 ncq 9764864 out
[   37.312067]          res 40/00:18:00:9d:4a/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[   37.312068] ata3.00: status: { DRDY }
[   37.312069] ata3.00: failed command: WRITE FPDMA QUEUED
[   37.312071] ata3.00: cmd 61/80:10:80:52:4a/4a:00:0d:00:00/40 tag 2 ncq 9764864 out
[   37.312071]          res 40/00:18:00:9d:4a/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[   37.312072] ata3.00: status: { DRDY }
[   37.312073] ata3.00: failed command: WRITE FPDMA QUEUED
[   37.312074] ata3.00: cmd 61/00:18:00:9d:4a/2b:00:0d:00:00/40 tag 3 ncq 5636096 out
[   37.312074]          res 40/00:18:00:9d:4a/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[   37.312075] ata3.00: status: { DRDY }
[   37.312076] ata3.00: failed command: READ FPDMA QUEUED
[   37.312078] ata3.00: cmd 60/08:20:28:08:c0/00:00:00:00:00/40 tag 4 ncq 4096 in
[   37.312078]          res 40/00:18:00:9d:4a/00:00:0d:00:00/40 Emask 0x10 (ATA bus error)
[   37.312079] ata3.00: status: { DRDY }
[   37.312081] ata3: hard resetting link
[   37.631612] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[   37.631946] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   37.631948] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   37.631950] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   37.632163] ata3.00: supports DRM functions and may not be fully accessible
[   37.632314] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[   37.632729] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[   37.632730] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[   37.632732] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[   37.632915] ata3.00: supports DRM functions and may not be fully accessible
[   37.632975] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[   37.633063] ata3.00: configured for UDMA/133
[   37.633161] ata3: EH complete
[  235.188955] SUPR0GipMap: fGetGipCpu=0x3
[  235.407428] vboxdrv: ffffffffc0000020 VMMR0.r0
[  235.486627] vboxdrv: ffffffffc00fa020 VBoxDDR0.r0
[  235.488395] vboxdrv: ffffffffc0119020 VBoxDD2R0.r0
[  235.502175] VBoxNetFlt: attached to 'eth0' / bc:5f:f4:b9:b4:87
[  235.516478] device eth0 entered promiscuous mode
[  366.212218] systemd-hostnamed[4276]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[ 1458.945330] ata3.00: exception Emask 0x10 SAct 0x20000 SErr 0x400100 action 0x6 frozen
[ 1458.945333] ata3.00: irq_stat 0x08000000, interface fatal error
[ 1458.945335] ata3: SError: { UnrecovData Handshk }
[ 1458.945337] ata3.00: failed command: WRITE FPDMA QUEUED
[ 1458.945339] ata3.00: cmd 61/10:88:a0:77:c4/00:00:0e:00:00/40 tag 17 ncq 8192 out
[ 1458.945339]          res 40/00:88:a0:77:c4/00:00:0e:00:00/40 Emask 0x10 (ATA bus error)
[ 1458.945340] ata3.00: status: { DRDY }
[ 1458.945343] ata3: hard resetting link
[ 1459.265063] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1459.266711] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1459.266713] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1459.266714] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1459.266918] ata3.00: supports DRM functions and may not be fully accessible
[ 1459.267063] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1459.267504] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1459.267506] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1459.267507] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1459.267690] ata3.00: supports DRM functions and may not be fully accessible
[ 1459.267756] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1459.267845] ata3.00: configured for UDMA/133
[ 1459.267940] ata3: EH complete
[ 2897.560265] ata3.00: exception Emask 0x10 SAct 0x2 SErr 0x400100 action 0x6 frozen
[ 2897.560268] ata3.00: irq_stat 0x08000000, interface fatal error
[ 2897.560270] ata3: SError: { UnrecovData Handshk }
[ 2897.560272] ata3.00: failed command: WRITE FPDMA QUEUED
[ 2897.560274] ata3.00: cmd 61/08:08:c0:4c:11/00:00:08:00:00/40 tag 1 ncq 4096 out
[ 2897.560274]          res 40/00:08:c0:4c:11/00:00:08:00:00/40 Emask 0x10 (ATA bus error)
[ 2897.560275] ata3.00: status: { DRDY }
[ 2897.560278] ata3: hard resetting link
[ 2897.879954] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2897.881629] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2897.881632] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2897.881633] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2897.881833] ata3.00: supports DRM functions and may not be fully accessible
[ 2897.881960] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2897.882388] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2897.882389] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2897.882391] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2897.882574] ata3.00: supports DRM functions and may not be fully accessible
[ 2897.882632] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2897.882723] ata3.00: configured for UDMA/133
[ 2897.882818] ata3: EH complete
[ 3686.876346] ata3.00: exception Emask 0x10 SAct 0x600 SErr 0x400100 action 0x6 frozen
[ 3686.876350] ata3.00: irq_stat 0x08000000, interface fatal error
[ 3686.876351] ata3: SError: { UnrecovData Handshk }
[ 3686.876353] ata3.00: failed command: WRITE FPDMA QUEUED
[ 3686.876356] ata3.00: cmd 61/10:48:58:43:00/00:00:15:00:00/40 tag 9 ncq 8192 out
[ 3686.876356]          res 40/00:50:80:13:04/00:00:15:00:00/40 Emask 0x10 (ATA bus error)
[ 3686.876357] ata3.00: status: { DRDY }
[ 3686.876358] ata3.00: failed command: WRITE FPDMA QUEUED
[ 3686.876360] ata3.00: cmd 61/08:50:80:13:04/00:00:15:00:00/40 tag 10 ncq 4096 out
[ 3686.876360]          res 40/00:50:80:13:04/00:00:15:00:00/40 Emask 0x10 (ATA bus error)
[ 3686.876361] ata3.00: status: { DRDY }
[ 3686.876363] ata3: hard resetting link
[ 3687.196055] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3687.197654] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 3687.197657] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 3687.197659] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 3687.197874] ata3.00: supports DRM functions and may not be fully accessible
[ 3687.198031] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3687.198499] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 3687.198502] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 3687.198503] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 3687.198699] ata3.00: supports DRM functions and may not be fully accessible
[ 3687.198780] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 3687.198880] ata3.00: configured for UDMA/133
[ 3687.198975] ata3: EH complete
[ 5369.305562] ata3.00: exception Emask 0x10 SAct 0x3000000 SErr 0x400100 action 0x6 frozen
[ 5369.305566] ata3.00: irq_stat 0x08000000, interface fatal error
[ 5369.305568] ata3: SError: { UnrecovData Handshk }
[ 5369.305570] ata3.00: failed command: WRITE FPDMA QUEUED
[ 5369.305572] ata3.00: cmd 61/40:c0:00:a8:6f/05:00:08:00:00/40 tag 24 ncq 688128 out
[ 5369.305572]          res 40/00:c8:40:ad:6f/00:00:08:00:00/40 Emask 0x10 (ATA bus error)
[ 5369.305574] ata3.00: status: { DRDY }
[ 5369.305575] ata3.00: failed command: WRITE FPDMA QUEUED
[ 5369.305577] ata3.00: cmd 61/08:c8:40:ad:6f/01:00:08:00:00/40 tag 25 ncq 135168 out
[ 5369.305577]          res 40/00:c8:40:ad:6f/00:00:08:00:00/40 Emask 0x10 (ATA bus error)
[ 5369.305578] ata3.00: status: { DRDY }
[ 5369.305580] ata3: hard resetting link
[ 5369.625244] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5369.626947] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5369.626949] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5369.626950] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5369.627163] ata3.00: supports DRM functions and may not be fully accessible
[ 5369.627316] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5369.627744] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5369.627746] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5369.627748] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5369.627932] ata3.00: supports DRM functions and may not be fully accessible
[ 5369.627993] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5369.628083] ata3.00: configured for UDMA/133
[ 5369.628180] ata3: EH complete
[ 5371.163908] ata3.00: exception Emask 0x10 SAct 0xc000000 SErr 0x400100 action 0x6 frozen
[ 5371.163912] ata3.00: irq_stat 0x08000000, interface fatal error
[ 5371.163913] ata3: SError: { UnrecovData Handshk }
[ 5371.163915] ata3.00: failed command: WRITE FPDMA QUEUED
[ 5371.163919] ata3.00: cmd 61/70:d0:00:10:0c/02:00:12:00:00/40 tag 26 ncq 319488 out
[ 5371.163919]          res 40/00:d0:00:10:0c/00:00:12:00:00/40 Emask 0x10 (ATA bus error)
[ 5371.163920] ata3.00: status: { DRDY }
[ 5371.163921] ata3.00: failed command: READ FPDMA QUEUED
[ 5371.163923] ata3.00: cmd 60/08:d8:08:08:40/00:00:15:00:00/40 tag 27 ncq 4096 in
[ 5371.163923]          res 40/00:d0:00:10:0c/00:00:12:00:00/40 Emask 0x10 (ATA bus error)
[ 5371.163925] ata3.00: status: { DRDY }
[ 5371.163927] ata3: hard resetting link
[ 5371.487616] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5371.489324] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5371.489327] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5371.489328] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5371.489529] ata3.00: supports DRM functions and may not be fully accessible
[ 5371.489654] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5371.490073] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5371.490074] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5371.490075] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5371.490259] ata3.00: supports DRM functions and may not be fully accessible
[ 5371.490319] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5371.490409] ata3.00: configured for UDMA/133
[ 5371.490506] ata3: EH complete
[ 5412.967250] ata3.00: exception Emask 0x10 SAct 0x40 SErr 0x400100 action 0x6 frozen
[ 5412.967253] ata3.00: irq_stat 0x08000000, interface fatal error
[ 5412.967256] ata3: SError: { UnrecovData Handshk }
[ 5412.967257] ata3.00: failed command: WRITE FPDMA QUEUED
[ 5412.967260] ata3.00: cmd 61/a8:30:00:d8:71/01:00:00:00:00/40 tag 6 ncq 217088 out
[ 5412.967260]          res 40/00:30:00:d8:71/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 5412.967261] ata3.00: status: { DRDY }
[ 5412.967264] ata3: hard resetting link
[ 5413.286982] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 5413.287287] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5413.287289] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5413.287291] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5413.287492] ata3.00: supports DRM functions and may not be fully accessible
[ 5413.287618] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5413.288074] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5413.288076] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5413.288078] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5413.288272] ata3.00: supports DRM functions and may not be fully accessible
[ 5413.288342] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5413.288431] ata3.00: configured for UDMA/133
[ 5413.288526] ata3: EH complete
[ 5416.200422] ata3: limiting SATA link speed to 3.0 Gbps
[ 5416.200426] ata3.00: exception Emask 0x10 SAct 0x4 SErr 0x400100 action 0x6 frozen
[ 5416.200428] ata3.00: irq_stat 0x08000000, interface fatal error
[ 5416.200429] ata3: SError: { UnrecovData Handshk }
[ 5416.200431] ata3.00: failed command: WRITE FPDMA QUEUED
[ 5416.200433] ata3.00: cmd 61/88:10:38:cb:72/04:00:00:00:00/40 tag 2 ncq 593920 out
[ 5416.200433]          res 40/00:10:38:cb:72/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
[ 5416.200435] ata3.00: status: { DRDY }
[ 5416.200437] ata3: hard resetting link
[ 5416.520128] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 5416.520448] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5416.520451] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5416.520452] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5416.520668] ata3.00: supports DRM functions and may not be fully accessible
[ 5416.520795] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5416.521260] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 5416.521263] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 5416.521264] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 5416.521470] ata3.00: supports DRM functions and may not be fully accessible
[ 5416.521546] ata3.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5416.521642] ata3.00: configured for UDMA/133
[ 5416.521754] ata3: EH complete
[ 6656.127890] perf interrupt took too long (2526 > 2500), lowering kernel.perf_event_max_sample_rate to 50000