[ 28.969497] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 28.969766] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 28.986874] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 28.990566] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 30.762212] wlan1: authenticate with c4:04:15:c8:8d:10 [ 30.774542] wlan1: send auth to c4:04:15:c8:8d:10 (try 1/3) [ 30.777148] wlan1: authenticated [ 30.780023] wlan1: associate with c4:04:15:c8:8d:10 (try 1/3) [ 30.781938] wlan1: RX AssocResp from c4:04:15:c8:8d:10 (capab=0x411 status=0 aid=3) [ 30.781976] wlan1: associated [ 30.781987] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 30.782207] cfg80211: Calling CRDA for country: GB [ 30.784688] cfg80211: Regulatory domain changed to country: GB [ 30.784691] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 30.784693] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 30.784695] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 30.784697] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 30.784698] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 30.784700] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 31.003834] nvidia 0000:01:00.0: irq 46 for MSI/MSI-X [ 31.763303] init: plymouth-upstart-bridge main process ended, respawning [ 58.878421] audit_printk_skb: 123 callbacks suppressed [ 58.878425] type=1400 audit(1450979540.650:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2165 comm="apparmor_parser" [ 58.878433] type=1400 audit(1450979540.650:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2165 comm="apparmor_parser" [ 58.878850] type=1400 audit(1450979540.650:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2165 comm="apparmor_parser" [ 678.780586] perf samples too long (2502 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 866.060064] wlan1: deauthenticating from c4:04:15:c8:8d:10 by local choice (reason=3) [ 866.073490] cfg80211: Calling CRDA to update world regulatory domain [ 866.079969] cfg80211: World regulatory domain updated: [ 866.079973] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 866.079975] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 866.079977] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 866.079979] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 866.079981] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 866.079982] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 867.368687] PM: Syncing filesystems ... done. [ 867.569095] PM: Preparing system for mem sleep [ 867.569292] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 867.571019] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 867.572086] PM: Entering mem sleep [ 867.572114] Suspending console(s) (use no_console_suspend to debug) [ 867.606393] sd 3:0:1:0: [sda] Synchronizing SCSI cache [ 867.606689] parport_pc 00:0d: disabled [ 867.606821] serial 00:0c: disabled [ 867.606864] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 867.606996] serial 00:05: disabled [ 867.607348] sd 3:0:1:0: [sda] Stopping disk [ 868.152032] PM: suspend of devices complete after 579.587 msecs [ 868.152326] PM: late suspend of devices complete after 0.291 msecs [ 868.152441] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 868.168046] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 868.184044] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 868.216074] pcieport 0000:00:1c.1: System wakeup enabled by ACPI [ 868.232120] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 868.248057] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [ 868.248087] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 868.248116] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 868.248144] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 868.248251] PM: noirq suspend of devices complete after 95.923 msecs [ 868.248574] ACPI: Preparing to enter system sleep state S3 [ 868.248801] PM: Saving platform NVS memory [ 868.249102] Disabling non-boot CPUs ... [ 868.352054] smpboot: CPU 1 is now offline [ 868.352265] ACPI: Low-level resume complete [ 868.352265] PM: Restoring platform NVS memory [ 868.352265] Force enabled HPET at resume [ 868.352265] Enabling non-boot CPUs ... [ 868.352265] x86: Booting SMP configuration: [ 868.352265] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 868.364003] TSC synchronization [CPU#0 -> CPU#1]: [ 868.364003] Measured 19948623 cycles TSC warp between CPUs, turning off TSC clock. [ 868.364003] tsc: Marking TSC unstable due to check_tsc_sync_source failed [ 868.373731] CPU1 is up [ 868.373744] Switched to clocksource hpet [ 868.375383] ACPI: Waking up from system sleep state S3 [ 868.380205] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 868.380237] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 868.380268] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 868.380298] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [ 868.396073] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 868.476072] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 868.492072] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 868.508074] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 868.508276] PM: noirq resume of devices complete after 140.491 msecs [ 868.508405] PM: early resume of devices complete after 0.101 msecs [ 868.508522] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 868.508635] usb usb5: root hub lost power or was reset [ 868.508711] usb usb6: root hub lost power or was reset [ 868.508778] usb usb7: root hub lost power or was reset [ 868.508845] usb usb8: root hub lost power or was reset [ 868.683257] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [ 868.683259] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 [ 868.683285] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add [ 868.683287] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00 [ 868.684001] serial 00:05: activated [ 868.684058] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 868.684682] serial 00:0c: activated [ 868.685390] parport_pc 00:0d: activated [ 868.685563] pcieport 0000:00:1c.1: System wakeup disabled by ACPI [ 869.070870] usb usb3: root hub lost power or was reset [ 869.180030] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [ 869.231373] usb usb4: root hub lost power or was reset [ 869.231391] usb usb2: root hub lost power or was reset [ 869.560104] usb 2-3: reset high-speed USB device number 3 using ehci-pci [ 869.972065] usb 2-3.2: reset high-speed USB device number 4 using ehci-pci [ 873.548119] ata4: link is slow to respond, please be patient (ready=0) [ 874.104131] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out [ 874.104132] ata4.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out [ 874.105219] ata4.01: ACPI cmd c6/00:10:00:00:00:b0 (SET MULTIPLE MODE) succeeded [ 874.105220] ata4.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 874.148126] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 874.148127] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 874.148129] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 874.164125] ata4.00: configured for UDMA/100 [ 874.180298] ata4.01: configured for UDMA/133 [ 874.188715] sd 3:0:1:0: [sda] Starting disk [ 874.214912] PM: resume of devices complete after 5706.505 msecs [ 875.379273] set resolution quirk: cval->res = 384 [ 875.379827] PM: Finishing wakeup. [ 875.382865] usb 2-2: USB disconnect, device number 2 [ 875.379828] Restarting tasks ... done. [ 875.485308] r8169 0000:03:00.0 eth3: link down [ 875.485369] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 875.527398] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 876.842947] teamviewerd[1948]: segfault at 14 ip 00000000f7702036 sp 00000000f638e580 error 4 in libpthread-2.19.so[f76f9000+18000] [ 877.108402] init: teamviewerd main process (1917) killed by SEGV signal [ 877.108417] init: teamviewerd main process ended, respawning [ 877.432450] wlan1: authenticate with c4:04:15:e4:4c:c8 [ 877.444849] wlan1: send auth to c4:04:15:e4:4c:c8 (try 1/3) [ 877.453464] wlan1: authenticated [ 877.456021] wlan1: associate with c4:04:15:e4:4c:c8 (try 1/3) [ 877.460450] wlan1: RX AssocResp from c4:04:15:e4:4c:c8 (capab=0x411 status=0 aid=4) [ 877.460499] wlan1: associated [ 877.460532] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 877.460611] cfg80211: Calling CRDA for country: GB [ 877.463302] cfg80211: Regulatory domain changed to country: GB [ 877.463306] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 877.463308] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 877.463310] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 877.463312] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 877.463313] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 877.463315] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 878.040026] usb 2-2: new high-speed USB device number 5 using ehci-pci [ 878.176370] usb 2-2: New USB device found, idVendor=04fc, idProduct=0c25 [ 878.176375] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 878.176377] usb 2-2: Product: USB to Serial-ATA bridge [ 878.176379] usb 2-2: Manufacturer: Sunplus Technology Inc. [ 878.176381] usb 2-2: SerialNumber: Maxtor 6B2B41J6JLH [ 878.178017] usb-storage 2-2:1.0: USB Mass Storage device detected [ 878.178074] scsi5 : usb-storage 2-2:1.0 [ 879.181336] scsi 5:0:0:0: Direct-Access Maxtor 6 B200M0 PQ: 0 ANSI: 2 [ 879.183065] sd 5:0:0:0: [sdc] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 879.183244] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 879.186589] sd 5:0:0:0: [sdc] Write Protect is off [ 879.186594] sd 5:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 879.189092] sd 5:0:0:0: [sdc] No Caching mode page found [ 879.189096] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 879.195323] sd 5:0:0:0: [sdc] No Caching mode page found [ 879.195326] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 879.220467] sdc: sdc1 [ 879.246712] sd 5:0:0:0: [sdc] No Caching mode page found [ 879.246718] sd 5:0:0:0: [sdc] Assuming drive cache: write through [ 879.246722] sd 5:0:0:0: [sdc] Attached SCSI disk [ 880.365026] systemd-hostnamed[3365]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 1647.249144] wlan1: deauthenticating from c4:04:15:e4:4c:c8 by local choice (reason=3) [ 1647.264038] cfg80211: Calling CRDA to update world regulatory domain [ 1647.270088] cfg80211: World regulatory domain updated: [ 1647.270092] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1647.270095] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1647.270096] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1647.270098] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1647.270100] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1647.270101] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1648.354893] PM: Syncing filesystems ... done. [ 1648.538794] PM: Preparing system for mem sleep [ 1648.538954] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 1648.540709] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 1648.541878] PM: Entering mem sleep [ 1648.541908] Suspending console(s) (use no_console_suspend to debug) [ 1648.569204] sd 3:0:1:0: [sda] Synchronizing SCSI cache [ 1648.569476] parport_pc 00:0d: disabled [ 1648.569545] sd 3:0:1:0: [sda] Stopping disk [ 1648.569609] serial 00:0c: disabled [ 1648.569654] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 1648.569836] serial 00:05: disabled [ 1649.112059] PM: suspend of devices complete after 569.828 msecs [ 1649.112356] PM: late suspend of devices complete after 0.294 msecs [ 1649.112473] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 1649.128071] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 1649.144070] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 1649.176104] pcieport 0000:00:1c.1: System wakeup enabled by ACPI [ 1649.192147] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 1649.208082] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [ 1649.208112] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 1649.208141] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 1649.208170] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 1649.208281] PM: noirq suspend of devices complete after 95.923 msecs [ 1649.208604] ACPI: Preparing to enter system sleep state S3 [ 1649.208819] PM: Saving platform NVS memory [ 1649.209112] Disabling non-boot CPUs ... [ 1649.312049] smpboot: CPU 1 is now offline [ 1649.312266] ACPI: Low-level resume complete [ 1649.312266] PM: Restoring platform NVS memory [ 1649.312266] Force enabled HPET at resume [ 1649.312266] Enabling non-boot CPUs ... [ 1649.312266] x86: Booting SMP configuration: [ 1649.312266] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 1649.323880] CPU1 is up [ 1649.325611] ACPI: Waking up from system sleep state S3 [ 1649.340223] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 1649.340255] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 1649.340286] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 1649.340316] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [ 1649.356074] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 1649.436072] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 1649.452072] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 1649.468074] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 1649.468275] PM: noirq resume of devices complete after 142.476 msecs [ 1649.468406] PM: early resume of devices complete after 0.102 msecs [ 1649.468509] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 1649.468648] usb usb5: root hub lost power or was reset [ 1649.468680] usb usb6: root hub lost power or was reset [ 1649.468751] usb usb7: root hub lost power or was reset [ 1649.468787] usb usb8: root hub lost power or was reset [ 1649.643317] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add [ 1649.643319] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00 [ 1649.679100] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [ 1649.679102] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 [ 1650.034869] usb usb3: root hub lost power or was reset [ 1650.035597] serial 00:05: activated [ 1650.035646] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 1650.036282] serial 00:0c: activated [ 1650.036992] parport_pc 00:0d: activated [ 1650.037225] pcieport 0000:00:1c.1: System wakeup disabled by ACPI [ 1650.185951] usb usb4: root hub lost power or was reset [ 1650.185968] usb usb2: root hub lost power or was reset [ 1650.252115] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [ 1650.516053] usb 2-3: reset high-speed USB device number 3 using ehci-pci [ 1650.944038] usb 2-3.2: reset high-speed USB device number 4 using ehci-pci [ 1654.516119] ata4: link is slow to respond, please be patient (ready=0) [ 1655.184139] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out [ 1655.184141] ata4.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out [ 1655.184938] ata4.01: ACPI cmd c6/00:10:00:00:00:b0 (SET MULTIPLE MODE) succeeded [ 1655.184940] ata4.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1655.228125] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 1655.228127] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 1655.228128] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1655.244124] ata4.00: configured for UDMA/100 [ 1655.261027] ata4.01: configured for UDMA/133 [ 1655.269441] sd 3:0:1:0: [sda] Starting disk [ 1655.295083] PM: resume of devices complete after 5826.675 msecs [ 1656.458860] set resolution quirk: cval->res = 384 [ 1656.459393] PM: Finishing wakeup. [ 1656.468675] usb 2-2: USB disconnect, device number 5 [ 1656.459395] Restarting tasks ... done. [ 1656.557329] r8169 0000:03:00.0 eth3: link down [ 1656.557379] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 1656.619239] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 1660.220512] wlan1: authenticate with c4:04:15:c8:8d:10 [ 1660.236232] wlan1: send auth to c4:04:15:c8:8d:10 (try 1/3) [ 1660.237674] wlan1: authenticated [ 1660.240035] wlan1: associate with c4:04:15:c8:8d:10 (try 1/3) [ 1660.241768] wlan1: RX AssocResp from c4:04:15:c8:8d:10 (capab=0x411 status=0 aid=1) [ 1660.241804] wlan1: associated [ 1660.241827] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 1660.241898] cfg80211: Calling CRDA for country: GB [ 1660.244947] cfg80211: Regulatory domain changed to country: GB [ 1660.244950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1660.244952] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1660.244954] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1660.244956] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1660.244957] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 1660.244959] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1660.267776] wlan1: deauthenticating from c4:04:15:c8:8d:10 by local choice (reason=2) [ 1660.274219] cfg80211: Calling CRDA to update world regulatory domain [ 1660.274299] wlan1: authenticate with c4:04:15:c8:8d:10 [ 1660.286330] wlan1: send auth to c4:04:15:c8:8d:10 (try 1/3) [ 1660.286484] cfg80211: World regulatory domain updated: [ 1660.286486] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1660.286489] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1660.286491] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1660.286492] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1660.286494] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1660.286496] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1662.060588] wlan1: send auth to c4:04:15:c8:8d:10 (try 2/3) [ 1662.164027] wlan1: send auth to c4:04:15:c8:8d:10 (try 3/3) [ 1662.268046] wlan1: authentication with c4:04:15:c8:8d:10 timed out [ 1667.410514] teamviewerd[3415]: segfault at 14 ip 00000000f774c036 sp 00000000f63d8580 error 4 in libpthread-2.19.so[f7743000+18000] [ 1667.564402] init: teamviewerd main process (3411) killed by SEGV signal [ 1667.564416] init: teamviewerd main process ended, respawning [ 1682.476026] usb 2-2: new high-speed USB device number 6 using ehci-pci [ 1682.611696] usb 2-2: New USB device found, idVendor=04fc, idProduct=0c25 [ 1682.611700] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1682.611703] usb 2-2: Product: USB to Serial-ATA bridge [ 1682.611705] usb 2-2: Manufacturer: Sunplus Technology Inc. [ 1682.611707] usb 2-2: SerialNumber: Maxtor 6B2B41J6JLH [ 1682.613472] usb-storage 2-2:1.0: USB Mass Storage device detected [ 1682.613523] scsi6 : usb-storage 2-2:1.0 [ 1683.616663] scsi 6:0:0:0: Direct-Access Maxtor 6 B200M0 PQ: 0 ANSI: 2 [ 1683.616907] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 1683.621289] sd 6:0:0:0: [sdc] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 1683.623831] sd 6:0:0:0: [sdc] Write Protect is off [ 1683.623836] sd 6:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 1683.626408] sd 6:0:0:0: [sdc] No Caching mode page found [ 1683.626413] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1683.632773] sd 6:0:0:0: [sdc] No Caching mode page found [ 1683.632777] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1683.655167] sdc: sdc1 [ 1683.681530] sd 6:0:0:0: [sdc] No Caching mode page found [ 1683.681535] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 1683.681538] sd 6:0:0:0: [sdc] Attached SCSI disk [ 1684.755752] systemd-hostnamed[4452]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 1685.708539] wlan1: authenticate with 00:00:00:00:00:00 [ 1685.724180] wlan1: send auth to 00:00:00:00:00:00 (try 1/3) [ 1685.837563] wlan1: send auth to 00:00:00:00:00:00 (try 2/3) [ 1685.956862] wlan1: send auth to 00:00:00:00:00:00 (try 3/3) [ 1686.074243] wlan1: authentication with 00:00:00:00:00:00 timed out [ 1687.864507] wlan1: authenticate with c4:04:15:c8:8d:10 [ 1687.882928] wlan1: direct probe to c4:04:15:c8:8d:10 (try 1/3) [ 1688.084030] wlan1: direct probe to c4:04:15:c8:8d:10 (try 2/3) [ 1688.288029] wlan1: direct probe to c4:04:15:c8:8d:10 (try 3/3) [ 1688.492032] wlan1: authentication with c4:04:15:c8:8d:10 timed out [ 1712.023463] wlan1: authenticate with 00:00:00:00:00:00 [ 1712.037723] wlan1: send auth to 00:00:00:00:00:00 (try 1/3) [ 1712.161358] wlan1: send auth to 00:00:00:00:00:00 (try 2/3) [ 1712.269043] wlan1: send auth to 00:00:00:00:00:00 (try 3/3) [ 1712.380496] wlan1: authentication with 00:00:00:00:00:00 timed out [ 1722.432421] wlan1: authenticate with c4:04:15:c8:8d:10 [ 1722.444148] wlan1: direct probe to c4:04:15:c8:8d:10 (try 1/3) [ 1722.648026] wlan1: direct probe to c4:04:15:c8:8d:10 (try 2/3) [ 1722.852027] wlan1: direct probe to c4:04:15:c8:8d:10 (try 3/3) [ 1723.056025] wlan1: authentication with c4:04:15:c8:8d:10 timed out [ 1740.015504] wlan1: authenticate with 00:00:00:00:00:00 [ 1740.034323] wlan1: send auth to 00:00:00:00:00:00 (try 1/3) [ 1740.127574] wlan1: send auth to 00:00:00:00:00:00 (try 2/3) [ 1740.237509] wlan1: send auth to 00:00:00:00:00:00 (try 3/3) [ 1740.356262] wlan1: authentication with 00:00:00:00:00:00 timed out [ 1750.404408] wlan1: authenticate with c4:04:15:c8:8d:10 [ 1750.416069] wlan1: direct probe to c4:04:15:c8:8d:10 (try 1/3) [ 1750.620027] wlan1: direct probe to c4:04:15:c8:8d:10 (try 2/3) [ 1750.824027] wlan1: direct probe to c4:04:15:c8:8d:10 (try 3/3) [ 1751.028032] wlan1: authentication with c4:04:15:c8:8d:10 timed out [ 1768.022762] wlan1: authenticate with 00:00:00:00:00:00 [ 1768.036155] wlan1: send auth to 00:00:00:00:00:00 (try 1/3) [ 1768.166097] wlan1: send auth to 00:00:00:00:00:00 (try 2/3) [ 1768.272029] wlan1: send auth to 00:00:00:00:00:00 (try 3/3) [ 1768.387097] wlan1: authentication with 00:00:00:00:00:00 timed out [ 1778.428434] wlan1: authenticate with c4:04:15:c8:8d:10 [ 1778.440253] wlan1: direct probe to c4:04:15:c8:8d:10 (try 1/3) [ 1778.644028] wlan1: direct probe to c4:04:15:c8:8d:10 (try 2/3) [ 1778.848027] wlan1: direct probe to c4:04:15:c8:8d:10 (try 3/3) [ 1779.052025] wlan1: authentication with c4:04:15:c8:8d:10 timed out [ 1796.026679] wlan1: authenticate with c4:04:15:e4:4c:c8 [ 1796.041059] wlan1: send auth to c4:04:15:e4:4c:c8 (try 1/3) [ 1796.043673] wlan1: authenticated [ 1796.044036] wlan1: associate with c4:04:15:e4:4c:c8 (try 1/3) [ 1796.048472] wlan1: RX AssocResp from c4:04:15:e4:4c:c8 (capab=0x411 status=0 aid=4) [ 1796.048525] wlan1: associated [ 1796.048602] cfg80211: Calling CRDA for country: GB [ 1796.051607] cfg80211: Regulatory domain changed to country: GB [ 1796.051611] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1796.051613] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1796.051615] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1796.051617] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 1796.051618] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 1796.051620] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 2468.151349] type=1400 audit(1451042292.834:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=5024 comm="apparmor_parser" [ 2468.151359] type=1400 audit(1451042292.834:72): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5024 comm="apparmor_parser" [ 2468.151779] type=1400 audit(1451042292.834:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=5024 comm="apparmor_parser" [ 5845.736417] wlan1: deauthenticating from c4:04:15:e4:4c:c8 by local choice (reason=3) [ 5845.750714] cfg80211: Calling CRDA to update world regulatory domain [ 5845.756884] cfg80211: World regulatory domain updated: [ 5845.756888] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5845.756890] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5845.756892] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5845.756894] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5845.756896] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5845.756897] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5846.958145] PM: Syncing filesystems ... done. [ 5847.168827] PM: Preparing system for mem sleep [ 5847.168988] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 5847.170736] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 5847.171901] PM: Entering mem sleep [ 5847.171926] Suspending console(s) (use no_console_suspend to debug) [ 5847.198988] sd 3:0:1:0: [sda] Synchronizing SCSI cache [ 5847.199271] parport_pc 00:0d: disabled [ 5847.199402] serial 00:0c: disabled [ 5847.199447] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 5847.199580] serial 00:05: disabled [ 5847.199711] sd 3:0:1:0: [sda] Stopping disk [ 5847.744060] PM: suspend of devices complete after 571.801 msecs [ 5847.744353] PM: late suspend of devices complete after 0.291 msecs [ 5847.744469] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 5847.760071] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 5847.776046] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 5847.808107] pcieport 0000:00:1c.1: System wakeup enabled by ACPI [ 5847.824132] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 5847.840077] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [ 5847.840106] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 5847.840136] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 5847.840164] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 5847.840275] PM: noirq suspend of devices complete after 95.919 msecs [ 5847.840598] ACPI: Preparing to enter system sleep state S3 [ 5847.840814] PM: Saving platform NVS memory [ 5847.841103] Disabling non-boot CPUs ... [ 5847.944165] smpboot: CPU 1 is now offline [ 5847.944401] ACPI: Low-level resume complete [ 5847.944401] PM: Restoring platform NVS memory [ 5847.944401] Force enabled HPET at resume [ 5847.944401] Enabling non-boot CPUs ... [ 5847.944401] x86: Booting SMP configuration: [ 5847.944401] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 5847.956025] CPU1 is up [ 5847.957736] ACPI: Waking up from system sleep state S3 [ 5847.972217] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 5847.972249] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 5847.972280] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 5847.972310] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [ 5847.988072] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 5848.068075] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 5848.084073] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 5848.100079] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 5848.100280] PM: noirq resume of devices complete after 142.354 msecs [ 5848.100409] PM: early resume of devices complete after 0.100 msecs [ 5848.100511] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 5848.100658] usb usb5: root hub lost power or was reset [ 5848.100734] usb usb6: root hub lost power or was reset [ 5848.100801] usb usb7: root hub lost power or was reset [ 5848.100869] usb usb8: root hub lost power or was reset [ 5848.662873] usb usb4: root hub lost power or was reset [ 5848.662895] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add [ 5848.662897] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00 [ 5848.698865] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [ 5848.698866] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 [ 5848.699577] serial 00:05: activated [ 5848.699626] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 5848.700259] serial 00:0c: activated [ 5848.700969] parport_pc 00:0d: activated [ 5848.701048] pcieport 0000:00:1c.1: System wakeup disabled by ACPI [ 5848.781957] usb usb3: root hub lost power or was reset [ 5848.781975] usb usb2: root hub lost power or was reset [ 5848.916063] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [ 5849.164031] usb 2-3: reset high-speed USB device number 3 using ehci-pci [ 5849.592120] usb 2-3.2: reset high-speed USB device number 4 using ehci-pci [ 5849.913981] restoring control 00000000-0000-0000-0000-000000000001/2/3 [ 5853.120117] ata4: link is slow to respond, please be patient (ready=0) [ 5853.732140] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out [ 5853.732141] ata4.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out [ 5853.733207] ata4.01: ACPI cmd c6/00:10:00:00:00:b0 (SET MULTIPLE MODE) succeeded [ 5853.733209] ata4.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 5853.776125] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 5853.776126] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 5853.776128] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 5853.792125] ata4.00: configured for UDMA/100 [ 5853.808346] ata4.01: configured for UDMA/133 [ 5853.816739] sd 3:0:1:0: [sda] Starting disk [ 5853.841920] PM: resume of devices complete after 5741.508 msecs [ 5855.006001] set resolution quirk: cval->res = 384 [ 5855.006530] PM: Finishing wakeup. [ 5855.012677] usb 2-2: USB disconnect, device number 6 [ 5855.006532] Restarting tasks ... done. [ 5855.089322] r8169 0000:03:00.0 eth3: link down [ 5855.089377] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 5855.141561] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 5856.166473] teamviewerd[4409]: segfault at 14 ip 00000000f7789036 sp 00000000f6415580 error 4 in libpthread-2.19.so[f7780000+18000] [ 5856.324416] init: teamviewerd main process (4405) killed by SEGV signal [ 5856.324430] init: teamviewerd main process ended, respawning [ 5856.896275] wlan1: authenticate with c4:04:15:c8:8d:10 [ 5856.914977] wlan1: send auth to c4:04:15:c8:8d:10 (try 1/3) [ 5856.916503] wlan1: authenticated [ 5856.924035] wlan1: associate with c4:04:15:c8:8d:10 (try 1/3) [ 5856.926056] wlan1: RX AssocResp from c4:04:15:c8:8d:10 (capab=0x411 status=0 aid=2) [ 5856.926100] wlan1: associated [ 5856.926127] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 5856.926218] cfg80211: Calling CRDA for country: GB [ 5856.929291] cfg80211: Regulatory domain changed to country: GB [ 5856.929295] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5856.929297] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5856.929299] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5856.929301] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 5856.929302] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 5856.929304] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 5857.912034] usb 2-2: new high-speed USB device number 7 using ehci-pci [ 5858.048745] usb 2-2: New USB device found, idVendor=04fc, idProduct=0c25 [ 5858.048750] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 5858.048752] usb 2-2: Product: USB to Serial-ATA bridge [ 5858.048754] usb 2-2: Manufacturer: Sunplus Technology Inc. [ 5858.048756] usb 2-2: SerialNumber: Maxtor 6B2B41J6JLH [ 5858.050652] usb-storage 2-2:1.0: USB Mass Storage device detected [ 5858.050716] scsi7 : usb-storage 2-2:1.0 [ 5859.052965] scsi 7:0:0:0: Direct-Access Maxtor 6 B200M0 PQ: 0 ANSI: 2 [ 5859.053209] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 5859.057833] sd 7:0:0:0: [sdc] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 5859.061969] sd 7:0:0:0: [sdc] Write Protect is off [ 5859.061974] sd 7:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 5859.064464] sd 7:0:0:0: [sdc] No Caching mode page found [ 5859.064468] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 5859.070833] sd 7:0:0:0: [sdc] No Caching mode page found [ 5859.070837] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 5859.090235] sdc: sdc1 [ 5859.116462] sd 7:0:0:0: [sdc] No Caching mode page found [ 5859.116467] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 5859.116471] sd 7:0:0:0: [sdc] Attached SCSI disk [ 5860.207202] systemd-hostnamed[6067]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 6426.944618] wlan1: deauthenticating from c4:04:15:c8:8d:10 by local choice (reason=3) [ 6426.959658] cfg80211: Calling CRDA to update world regulatory domain [ 6426.972325] cfg80211: World regulatory domain updated: [ 6426.972328] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6426.972331] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6426.972333] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6426.972334] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6426.972336] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6426.972338] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6428.146097] PM: Syncing filesystems ... done. [ 6428.359418] PM: Preparing system for mem sleep [ 6428.359581] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6428.361459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6428.362667] PM: Entering mem sleep [ 6428.362692] Suspending console(s) (use no_console_suspend to debug) [ 6428.396661] sd 3:0:1:0: [sda] Synchronizing SCSI cache [ 6428.396947] parport_pc 00:0d: disabled [ 6428.397080] serial 00:0c: disabled [ 6428.397124] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 6428.397262] serial 00:05: disabled [ 6428.397857] sd 3:0:1:0: [sda] Stopping disk [ 6428.924052] PM: suspend of devices complete after 561.038 msecs [ 6428.924351] PM: late suspend of devices complete after 0.296 msecs [ 6428.924467] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 6428.940062] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 6428.956062] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 6428.988096] pcieport 0000:00:1c.1: System wakeup enabled by ACPI [ 6429.004123] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 6429.020064] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [ 6429.020094] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 6429.020123] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 6429.020152] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 6429.020262] PM: noirq suspend of devices complete after 95.909 msecs [ 6429.020585] ACPI: Preparing to enter system sleep state S3 [ 6429.020802] PM: Saving platform NVS memory [ 6429.021098] Disabling non-boot CPUs ... [ 6429.124138] smpboot: CPU 1 is now offline [ 6429.124358] ACPI: Low-level resume complete [ 6429.124358] PM: Restoring platform NVS memory [ 6429.124358] Force enabled HPET at resume [ 6429.124358] Enabling non-boot CPUs ... [ 6429.124358] x86: Booting SMP configuration: [ 6429.124358] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6429.135955] CPU1 is up [ 6429.137687] ACPI: Waking up from system sleep state S3 [ 6429.152207] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 6429.152239] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 6429.152269] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 6429.152300] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [ 6429.168065] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 6429.248047] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 6429.264064] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 6429.280066] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 6429.280268] PM: noirq resume of devices complete after 142.394 msecs [ 6429.280397] PM: early resume of devices complete after 0.100 msecs [ 6429.280507] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 6429.280641] usb usb5: root hub lost power or was reset [ 6429.280708] usb usb6: root hub lost power or was reset [ 6429.280773] usb usb7: root hub lost power or was reset [ 6429.280838] usb usb8: root hub lost power or was reset [ 6429.455473] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [ 6429.455475] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 [ 6429.455529] pcieport 0000:00:1c.1: System wakeup disabled by ACPI [ 6429.481920] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add [ 6429.481922] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00 [ 6429.846605] usb usb3: root hub lost power or was reset [ 6429.847345] serial 00:05: activated [ 6429.847393] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 6429.848157] serial 00:0c: activated [ 6429.848872] parport_pc 00:0d: activated [ 6429.988519] usb usb4: root hub lost power or was reset [ 6429.988536] usb usb2: root hub lost power or was reset [ 6430.064050] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [ 6430.316029] usb 2-3: reset high-speed USB device number 3 using ehci-pci [ 6430.728051] usb 2-3.2: reset high-speed USB device number 4 using ehci-pci [ 6431.049133] restoring control 00000000-0000-0000-0000-000000000001/2/3 [ 6434.328040] ata4: link is slow to respond, please be patient (ready=0) [ 6434.884136] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out [ 6434.884138] ata4.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out [ 6434.885105] ata4.01: ACPI cmd c6/00:10:00:00:00:b0 (SET MULTIPLE MODE) succeeded [ 6434.885107] ata4.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6434.920123] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 6434.920125] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 6434.920126] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6434.936123] ata4.00: configured for UDMA/100 [ 6434.953169] ata4.01: configured for UDMA/133 [ 6434.961569] sd 3:0:1:0: [sda] Starting disk [ 6434.987712] PM: resume of devices complete after 5707.312 msecs [ 6436.151594] set resolution quirk: cval->res = 384 [ 6436.152139] PM: Finishing wakeup. [ 6436.159710] usb 2-2: USB disconnect, device number 7 [ 6436.152140] Restarting tasks ... done. [ 6436.234050] r8169 0000:03:00.0 eth3: link down [ 6436.234102] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 6436.284056] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 6437.367043] teamviewerd[6114]: segfault at 14 ip 00000000f7761036 sp 00000000f63ed580 error 4 in libpthread-2.19.so[f7758000+18000] [ 6437.525067] init: teamviewerd main process (6110) killed by SEGV signal [ 6437.525081] init: teamviewerd main process ended, respawning [ 6438.142818] wlan1: authenticate with c4:04:15:e4:4c:c8 [ 6438.162321] wlan1: send auth to c4:04:15:e4:4c:c8 (try 1/3) [ 6438.165217] wlan1: authenticated [ 6438.172452] wlan1: associate with c4:04:15:e4:4c:c8 (try 1/3) [ 6438.177083] wlan1: RX AssocResp from c4:04:15:e4:4c:c8 (capab=0x411 status=0 aid=5) [ 6438.177134] wlan1: associated [ 6438.177169] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 6438.177256] cfg80211: Calling CRDA for country: GB [ 6438.181470] cfg80211: Regulatory domain changed to country: GB [ 6438.181475] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6438.181477] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6438.181479] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6438.181481] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6438.181483] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 6438.181484] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 6438.736022] usb 2-2: new high-speed USB device number 8 using ehci-pci [ 6438.872078] usb 2-2: New USB device found, idVendor=04fc, idProduct=0c25 [ 6438.872082] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 6438.872085] usb 2-2: Product: USB to Serial-ATA bridge [ 6438.872087] usb 2-2: Manufacturer: Sunplus Technology Inc. [ 6438.872089] usb 2-2: SerialNumber: Maxtor 6B2B41J6JLH [ 6438.873724] usb-storage 2-2:1.0: USB Mass Storage device detected [ 6438.873782] scsi8 : usb-storage 2-2:1.0 [ 6439.876546] scsi 8:0:0:0: Direct-Access Maxtor 6 B200M0 PQ: 0 ANSI: 2 [ 6439.878233] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 6439.880560] sd 8:0:0:0: [sdc] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 6439.883049] sd 8:0:0:0: [sdc] Write Protect is off [ 6439.883054] sd 8:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 6439.885530] sd 8:0:0:0: [sdc] No Caching mode page found [ 6439.885534] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 6439.892058] sd 8:0:0:0: [sdc] No Caching mode page found [ 6439.892064] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 6439.914322] sdc: sdc1 [ 6439.940507] sd 8:0:0:0: [sdc] No Caching mode page found [ 6439.940512] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 6439.940515] sd 8:0:0:0: [sdc] Attached SCSI disk [ 6441.031137] systemd-hostnamed[7353]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 6548.161430] wlan1: deauthenticating from c4:04:15:e4:4c:c8 by local choice (reason=3) [ 6548.171608] cfg80211: Calling CRDA to update world regulatory domain [ 6548.177792] cfg80211: World regulatory domain updated: [ 6548.177796] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6548.177798] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6548.177800] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6548.177801] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6548.177803] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6548.177805] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6549.320257] PM: Syncing filesystems ... done. [ 6549.478154] PM: Preparing system for mem sleep [ 6549.478320] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 6549.480133] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 6549.481398] PM: Entering mem sleep [ 6549.481428] Suspending console(s) (use no_console_suspend to debug) [ 6549.508019] sd 3:0:1:0: [sda] Synchronizing SCSI cache [ 6549.508202] sd 3:0:1:0: [sda] Stopping disk [ 6549.508641] parport_pc 00:0d: disabled [ 6549.508768] serial 00:0c: disabled [ 6549.508811] i8042 kbd 00:0a: System wakeup enabled by ACPI [ 6549.508942] serial 00:05: disabled [ 6550.040051] PM: suspend of devices complete after 558.302 msecs [ 6550.040345] PM: late suspend of devices complete after 0.291 msecs [ 6550.040462] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 6550.056064] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 6550.072062] pci 0000:00:1e.0: System wakeup enabled by ACPI [ 6550.104096] pcieport 0000:00:1c.1: System wakeup enabled by ACPI [ 6550.120139] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [ 6550.136075] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [ 6550.136105] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [ 6550.136134] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [ 6550.136163] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [ 6550.136274] PM: noirq suspend of devices complete after 95.926 msecs [ 6550.136597] ACPI: Preparing to enter system sleep state S3 [ 6550.136814] PM: Saving platform NVS memory [ 6550.137102] Disabling non-boot CPUs ... [ 6550.240060] smpboot: CPU 1 is now offline [ 6550.240278] ACPI: Low-level resume complete [ 6550.240278] PM: Restoring platform NVS memory [ 6550.240278] Force enabled HPET at resume [ 6550.240278] Enabling non-boot CPUs ... [ 6550.240278] x86: Booting SMP configuration: [ 6550.240278] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 6550.251895] CPU1 is up [ 6550.253631] ACPI: Waking up from system sleep state S3 [ 6550.268209] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [ 6550.268241] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [ 6550.268272] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [ 6550.268302] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [ 6550.284067] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [ 6550.364065] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 6550.380067] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 6550.396067] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 6550.396269] PM: noirq resume of devices complete after 142.455 msecs [ 6550.396397] PM: early resume of devices complete after 0.100 msecs [ 6550.396502] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 6550.396620] usb usb5: root hub lost power or was reset [ 6550.396655] usb usb6: root hub lost power or was reset [ 6550.400086] usb usb7: root hub lost power or was reset [ 6550.400154] usb usb8: root hub lost power or was reset [ 6550.962604] usb usb3: root hub lost power or was reset [ 6550.998448] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [ 6550.998449] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 [ 6550.998469] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add [ 6550.998471] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00 [ 6550.999184] serial 00:05: activated [ 6550.999233] i8042 kbd 00:0a: System wakeup disabled by ACPI [ 6550.999859] serial 00:0c: activated [ 6551.000585] parport_pc 00:0d: activated [ 6551.000810] pcieport 0000:00:1c.1: System wakeup disabled by ACPI [ 6551.077757] usb usb4: root hub lost power or was reset [ 6551.077774] usb usb2: root hub lost power or was reset [ 6551.212054] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [ 6555.424081] ata4: link is slow to respond, please be patient (ready=0) [ 6556.036136] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out [ 6556.036137] ata4.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out [ 6556.037183] ata4.01: ACPI cmd c6/00:10:00:00:00:b0 (SET MULTIPLE MODE) succeeded [ 6556.037185] ata4.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6556.080126] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [ 6556.080128] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 6556.080129] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 6556.096122] ata4.00: configured for UDMA/100 [ 6556.113259] ata4.01: configured for UDMA/133 [ 6556.121667] sd 3:0:1:0: [sda] Starting disk [ 6556.156264] PM: resume of devices complete after 5759.864 msecs [ 6556.156723] PM: Finishing wakeup. [ 6556.160160] usb 2-2: USB disconnect, device number 8 [ 6556.156725] Restarting tasks ... done. [ 6556.173424] usb 2-3: USB disconnect, device number 3 [ 6556.173430] usb 2-3.2: USB disconnect, device number 4 [ 6556.253338] r8169 0000:03:00.0 eth3: link down [ 6556.253387] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [ 6556.291694] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 6556.444034] usb 2-3: new high-speed USB device number 9 using ehci-pci [ 6556.592728] usb 2-3: New USB device found, idVendor=0424, idProduct=2514 [ 6556.592734] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6556.593303] hub 2-3:1.0: USB hub found [ 6556.593474] hub 2-3:1.0: 4 ports detected [ 6556.864035] usb 2-3.2: new high-speed USB device number 10 using ehci-pci [ 6557.189097] usb 2-3.2: New USB device found, idVendor=046d, idProduct=0825 [ 6557.189102] usb 2-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 6557.189104] usb 2-3.2: SerialNumber: 0C7612D0 [ 6557.189397] uvcvideo: Found UVC 1.00 device (046d:0825) [ 6557.286448] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/usb2/2-3/2-3.2/2-3.2:1.0/input/input14 [ 6558.196341] wlan1: authenticate with c4:04:15:c8:8d:10 [ 6558.209301] wlan1: send auth to c4:04:15:c8:8d:10 (try 1/3) [ 6558.210827] wlan1: authenticated [ 6558.212068] wlan1: associate with c4:04:15:c8:8d:10 (try 1/3) [ 6558.213802] wlan1: RX AssocResp from c4:04:15:c8:8d:10 (capab=0x411 status=0 aid=2) [ 6558.213849] wlan1: associated [ 6558.213879] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 6558.213963] cfg80211: Calling CRDA for country: GB [ 6558.216690] cfg80211: Regulatory domain changed to country: GB [ 6558.216694] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6558.216696] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6558.216698] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6558.216700] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 6558.216701] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 6558.216703] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 6558.449809] set resolution quirk: cval->res = 384 [ 6560.068028] usb 2-2: new high-speed USB device number 11 using ehci-pci [ 6560.204194] usb 2-2: New USB device found, idVendor=04fc, idProduct=0c25 [ 6560.204199] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 6560.204201] usb 2-2: Product: USB to Serial-ATA bridge [ 6560.204203] usb 2-2: Manufacturer: Sunplus Technology Inc. [ 6560.204205] usb 2-2: SerialNumber: Maxtor 6B2B41J6JLH [ 6560.206085] usb-storage 2-2:1.0: USB Mass Storage device detected [ 6560.206145] scsi9 : usb-storage 2-2:1.0 [ 6561.208657] scsi 9:0:0:0: Direct-Access Maxtor 6 B200M0 PQ: 0 ANSI: 2 [ 6561.210524] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 6561.212773] sd 9:0:0:0: [sdc] 398297088 512-byte logical blocks: (203 GB/189 GiB) [ 6561.215832] sd 9:0:0:0: [sdc] Write Protect is off [ 6561.215839] sd 9:0:0:0: [sdc] Mode Sense: 38 00 00 00 [ 6561.218400] sd 9:0:0:0: [sdc] No Caching mode page found [ 6561.218403] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 6561.224761] sd 9:0:0:0: [sdc] No Caching mode page found [ 6561.224765] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 6561.246644] sdc: sdc1 [ 6561.272865] sd 9:0:0:0: [sdc] No Caching mode page found [ 6561.272869] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 6561.272872] sd 9:0:0:0: [sdc] Attached SCSI disk [ 6567.237193] teamviewerd[7403]: segfault at 14 ip 00000000f76fe036 sp 00000000f638a640 error 4 in libpthread-2.19.so[f76f5000+18000] [ 6567.392422] init: teamviewerd main process (7399) killed by SEGV signal [ 6567.392435] init: teamviewerd main process ended, respawning [10815.556560] wlan1: deauthenticating from c4:04:15:c8:8d:10 by local choice (reason=3) [10815.569238] cfg80211: Calling CRDA to update world regulatory domain [10816.494803] cfg80211: World regulatory domain updated: [10816.494808] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [10816.494810] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10816.494812] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10816.494814] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [10816.494815] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10816.494817] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [10817.210336] usb 2-3: USB disconnect, device number 9 [10817.210341] usb 2-3.2: USB disconnect, device number 10 [10822.320202] PM: Syncing filesystems ... done. [10822.568386] PM: Preparing system for mem sleep [10822.568541] Freezing user space processes ... (elapsed 0.137 seconds) done. [10822.705603] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [10822.706769] PM: Entering mem sleep [10822.706794] Suspending console(s) (use no_console_suspend to debug) [10822.740189] sd 3:0:1:0: [sda] Synchronizing SCSI cache [10822.740359] parport_pc 00:0d: disabled [10822.740461] sd 3:0:1:0: [sda] Stopping disk [10822.740499] serial 00:0c: disabled [10822.740544] i8042 kbd 00:0a: System wakeup enabled by ACPI [10822.740678] serial 00:05: disabled [10823.292060] PM: suspend of devices complete after 584.957 msecs [10823.292341] PM: late suspend of devices complete after 0.278 msecs [10823.292454] pci 0000:00:1e.0: System wakeup enabled by ACPI [10823.308073] pci 0000:00:1e.0: System wakeup enabled by ACPI [10823.324045] pci 0000:00:1e.0: System wakeup enabled by ACPI [10823.356104] pcieport 0000:00:1c.1: System wakeup enabled by ACPI [10823.372147] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI [10823.388083] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI [10823.388113] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI [10823.388142] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI [10823.388171] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI [10823.388281] PM: noirq suspend of devices complete after 95.937 msecs [10823.388604] ACPI: Preparing to enter system sleep state S3 [10823.388820] PM: Saving platform NVS memory [10823.389109] Disabling non-boot CPUs ... [10823.492164] smpboot: CPU 1 is now offline [10823.492409] ACPI: Low-level resume complete [10823.492409] PM: Restoring platform NVS memory [10823.492409] Force enabled HPET at resume [10823.492409] Enabling non-boot CPUs ... [10823.492409] x86: Booting SMP configuration: [10823.492409] smpboot: Booting Node 0 Processor 1 APIC 0x1 [10823.504025] CPU1 is up [10823.505733] ACPI: Waking up from system sleep state S3 [10823.520210] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI [10823.520242] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI [10823.520272] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI [10823.520302] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI [10823.536073] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI [10823.616072] pci 0000:00:1e.0: System wakeup disabled by ACPI [10823.632072] pci 0000:00:1e.0: System wakeup disabled by ACPI [10823.648074] pci 0000:00:1e.0: System wakeup disabled by ACPI [10823.648267] PM: noirq resume of devices complete after 142.339 msecs [10823.648391] PM: early resume of devices complete after 0.096 msecs [10823.648504] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [10823.648605] usb usb5: root hub lost power or was reset [10823.648640] usb usb6: root hub lost power or was reset [10823.648718] usb usb7: root hub lost power or was reset [10823.648751] usb usb8: root hub lost power or was reset [10823.858469] pciehp 0000:00:1c.3:pcie04: Device 0000:04:00.0 already exists at 0000:04:00, cannot hot-add [10823.858471] pciehp 0000:00:1c.3:pcie04: Cannot add device at 0000:04:00 [10823.858489] pciehp 0000:00:1c.1:pcie04: Device 0000:03:00.0 already exists at 0000:03:00, cannot hot-add [10823.858490] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:03:00 [10823.858578] pcieport 0000:00:1c.1: System wakeup disabled by ACPI [10823.861501] serial 00:05: activated [10823.861550] i8042 kbd 00:0a: System wakeup disabled by ACPI [10823.862175] serial 00:0c: activated [10823.862886] parport_pc 00:0d: activated [10824.210852] usb usb3: root hub lost power or was reset [10824.320032] usb 7-1: reset full-speed USB device number 2 using uhci_hcd [10824.370868] usb usb4: root hub lost power or was reset [10824.370886] usb usb2: root hub lost power or was reset [10828.692039] ata4: link is slow to respond, please be patient (ready=0) [10829.360140] ata4.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out [10829.360141] ata4.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out [10829.360259] ata4.01: ACPI cmd c6/00:10:00:00:00:b0 (SET MULTIPLE MODE) succeeded [10829.360261] ata4.01: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [10829.400125] ata4.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out [10829.400126] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [10829.400128] ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [10829.416125] ata4.00: configured for UDMA/100 [10829.432376] ata4.01: configured for UDMA/133 [10829.440780] sd 3:0:1:0: [sda] Starting disk [10829.468604] PM: resume of devices complete after 5820.210 msecs [10829.469023] PM: Finishing wakeup. [10829.469024] Restarting tasks ... done. [10829.474124] usb 2-2: USB disconnect, device number 11 [10829.897308] r8169 0000:03:00.0 eth3: link down [10829.897364] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready [10829.935305] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [10831.859100] wlan1: authenticate with c4:04:15:e4:4c:c8 [10831.871458] wlan1: send auth to c4:04:15:e4:4c:c8 (try 1/3) [10831.874429] wlan1: authenticated [10831.876036] wlan1: associate with c4:04:15:e4:4c:c8 (try 1/3) [10831.880464] wlan1: RX AssocResp from c4:04:15:e4:4c:c8 (capab=0x411 status=0 aid=4) [10831.880510] wlan1: associated [10831.880541] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [10831.880620] cfg80211: Calling CRDA for country: GB [10831.883581] cfg80211: Regulatory domain changed to country: GB [10831.883586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [10831.883588] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [10831.883589] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [10831.883591] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [10831.883593] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [10831.883595] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [10833.040033] usb 2-2: new high-speed USB device number 12 using ehci-pci [10833.180697] usb 2-2: New USB device found, idVendor=04fc, idProduct=0c25 [10833.180702] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [10833.180704] usb 2-2: Product: USB to Serial-ATA bridge [10833.180706] usb 2-2: Manufacturer: Sunplus Technology Inc. [10833.180708] usb 2-2: SerialNumber: Maxtor 6B2B41J6JLH [10833.182593] usb-storage 2-2:1.0: USB Mass Storage device detected [10833.185725] scsi10 : usb-storage 2-2:1.0 [10834.188923] scsi 10:0:0:0: Direct-Access Maxtor 6 B200M0 PQ: 0 ANSI: 2 [10834.189917] sd 10:0:0:0: Attached scsi generic sg2 type 0 [10834.191070] sd 10:0:0:0: [sdc] 398297088 512-byte logical blocks: (203 GB/189 GiB) [10834.194168] sd 10:0:0:0: [sdc] Write Protect is off [10834.194174] sd 10:0:0:0: [sdc] Mode Sense: 38 00 00 00 [10834.196670] sd 10:0:0:0: [sdc] No Caching mode page found [10834.196675] sd 10:0:0:0: [sdc] Assuming drive cache: write through [10834.202786] sd 10:0:0:0: [sdc] No Caching mode page found [10834.202791] sd 10:0:0:0: [sdc] Assuming drive cache: write through [10834.223932] sdc: sdc1 [10834.255548] sd 10:0:0:0: [sdc] No Caching mode page found [10834.255554] sd 10:0:0:0: [sdc] Assuming drive cache: write through [10834.255558] sd 10:0:0:0: [sdc] Attached SCSI disk [10837.112470] teamviewerd[8213]: segfault at 14 ip 00000000f7761036 sp 00000000f63ed580 error 4 in libpthread-2.19.so[f7758000+18000] [10840.511616] systemd-hostnamed[10400]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [10842.195314] init: teamviewerd main process (8209) killed by SEGV signal [10842.195329] init: teamviewerd main process ended, respawning [10893.800027] usb 2-3: new high-speed USB device number 13 using ehci-pci [10893.932669] usb 2-3: New USB device found, idVendor=0424, idProduct=2514 [10893.932672] usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [10893.932944] hub 2-3:1.0: USB hub found [10893.933036] hub 2-3:1.0: 4 ports detected [10894.204069] usb 2-3.2: new high-speed USB device number 14 using ehci-pci [10894.529338] usb 2-3.2: New USB device found, idVendor=046d, idProduct=0825 [10894.529342] usb 2-3.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [10894.529344] usb 2-3.2: SerialNumber: 0C7612D0 [10894.529639] uvcvideo: Found UVC 1.00 device (046d:0825) [10894.626445] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/usb2/2-3/2-3.2/2-3.2:1.0/input/input15 [10895.789811] set resolution quirk: cval->res = 384