[ 3.402209] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3.737996] Ebtables v2.0 registered [ 3.815514] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 3.853158] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 3.853575] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 3.855053] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.855316] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3.856188] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.867731] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3.868009] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4.105669] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready [ 5.020280] Console: switching to colour frame buffer device 180x56 [ 5.023580] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 5.023591] i915 0000:00:02.0: registered panic notifier [ 5.033081] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.033538] acpi device:48: registered as cooling_device5 [ 5.034166] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11 [ 5.034252] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.034461] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X [ 5.034545] HDA driver get symbol successfully from i915 module [ 5.034561] snd_hda_intel 0000:00:03.0: irq 62 for MSI/MSI-X [ 5.051906] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14 [ 5.052245] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13 [ 5.052534] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12 [ 5.054307] SKU: Nid=0x1d sku_cfg=0x40d6832d [ 5.054308] SKU: port_connectivity=0x1 [ 5.054308] SKU: enable_pcbeep=0x1 [ 5.054309] SKU: check_sum=0x00000006 [ 5.054309] SKU: customization=0x00000083 [ 5.054310] SKU: external_amp=0x5 [ 5.054310] SKU: platform_type=0x1 [ 5.054310] SKU: swap=0x0 [ 5.054311] SKU: override=0x1 [ 5.054788] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 5.054789] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.054790] hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 5.054790] mono: mono_out=0x0 [ 5.054790] inputs: [ 5.054791] Headphone Mic=0x19 [ 5.054792] Headset Mic=0x1b [ 5.054793] Internal Mic=0x12 [ 5.054794] realtek: No valid SSID, checking pincfg 0x40d6832d for NID 0x1d [ 5.054795] realtek: Enabling init ASM_ID=0x832d CODEC_ID=10ec0668 [ 5.064350] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15 [ 5.119584] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel [ 5.123388] vboxdrv: Found 4 processor cores. [ 5.123860] vboxdrv: fAsync=0 offMin=0x11e offMax=0xc5b [ 5.123928] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 5.123928] vboxdrv: Successfully loaded version 4.3.34_Ubuntu (interface 0x001a000b). [ 5.140983] vboxpci: IOMMU not found (not registered) [ 7.610221] init: plymouth-upstart-bridge main process ended, respawning [ 7.615332] init: plymouth main process (211) killed by SEGV signal [ 7.615693] init: plymouth-upstart-bridge main process (1757) terminated with status 1 [ 7.615703] init: plymouth-upstart-bridge main process ended, respawning [ 9.146670] ahci 0000:00:1f.2: port does not support device sleep [ 14.626029] systemd-hostnamed[2214]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname! [ 32.668973] wlan0: authenticate with 08:5b:0e:8c:97:d7 [ 32.671106] wlan0: send auth to 08:5b:0e:8c:97:d7 (try 1/3) [ 32.673287] wlan0: authenticated [ 32.677134] wlan0: associate with 08:5b:0e:8c:97:d7 (try 1/3) [ 32.682028] wlan0: RX AssocResp from 08:5b:0e:8c:97:d7 (capab=0x431 status=0 aid=1) [ 32.682724] wlan0: associated [ 32.682762] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 32.682851] cfg80211: Calling CRDA for country: GB [ 32.686224] cfg80211: Regulatory domain changed to country: GB [ 32.686228] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 32.686231] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 32.686233] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 32.686235] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 32.686237] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 32.686239] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 32.695244] audit_printk_skb: 207 callbacks suppressed [ 32.695247] type=1400 audit(1450687401.292:80): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2261 comm="apparmor_parser" [ 32.695253] type=1400 audit(1450687401.292:81): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2261 comm="apparmor_parser" [ 32.695710] type=1400 audit(1450687401.292:82): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2261 comm="apparmor_parser" [ 49.422945] traps: unity-settings-[2569] trap int3 ip:7f62f876fc13 sp:7ffd275223e0 error:0 [ 380.612889] usb 3-1: USB disconnect, device number 2 [ 380.612899] usb 3-1.1: USB disconnect, device number 3 [ 380.613018] usb 3-1.1: Failed to set U1 timeout to 0x0,error code -19 [ 380.613026] usb 3-1.1: Failed to set U1 timeout to 0xff,error code -19 [ 380.613031] usb 3-1.1: Failed to set U2 timeout to 0xff,error code -19 [ 380.613122] ax88179_178a 3-1.1:1.0 eth1: unregister 'ax88179_178a' usb-0000:00:14.0-1.1, ASIX AX88179 USB 3.0 Gigabit Ethernet [ 380.613147] ax88179_178a 3-1.1:1.0 eth1: Failed to read reg index 0x0002: -19 [ 380.613153] ax88179_178a 3-1.1:1.0 eth1: Failed to write reg index 0x0002: -19 [ 380.648596] ax88179_178a 3-1.1:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19 [ 380.648610] ax88179_178a 3-1.1:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19 [ 380.648612] ax88179_178a 3-1.1:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19 [ 380.648657] usb 3-1.1: Failed to set U1 timeout to 0x0,error code -19 [ 380.648676] usb 3-1.1: Failed to set U1 timeout to 0x29,error code -19 [ 380.648680] usb 3-1.1: Failed to set U2 timeout to 0x28,error code -19 [ 463.884120] usb 3-1: new SuperSpeed USB device number 4 using xhci_hcd [ 464.139316] usb 3-1: New USB device found, idVendor=2109, idProduct=0812 [ 464.139326] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 464.139331] usb 3-1: Product: USB3.0 Hub [ 464.139335] usb 3-1: Manufacturer: VIA Labs, Inc. [ 464.141383] hub 3-1:1.0: USB hub found [ 464.141543] hub 3-1:1.0: 4 ports detected [ 464.512608] usb 3-1.1: new SuperSpeed USB device number 5 using xhci_hcd [ 464.535497] usb 3-1.1: New USB device found, idVendor=0b95, idProduct=1790 [ 464.535504] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 464.535509] usb 3-1.1: Product: AX88179 [ 464.535512] usb 3-1.1: Manufacturer: ASIX Elec. Corp. [ 464.535515] usb 3-1.1: SerialNumber: 000000000005C2 [ 464.860924] ax88179_178a 3-1.1:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-1.1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:23:56:4c:07:28 [ 464.896934] systemd-udevd[3082]: renamed network interface eth0 to eth1 [ 465.226675] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 465.227086] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 2041.597976] usb 3-1: USB disconnect, device number 4 [ 2041.597986] usb 3-1.1: USB disconnect, device number 5 [ 2041.598104] usb 3-1.1: Failed to set U1 timeout to 0x0,error code -19 [ 2041.598111] usb 3-1.1: Failed to set U1 timeout to 0xff,error code -19 [ 2041.598117] usb 3-1.1: Failed to set U2 timeout to 0xff,error code -19 [ 2041.598199] ax88179_178a 3-1.1:1.0 eth1: unregister 'ax88179_178a' usb-0000:00:14.0-1.1, ASIX AX88179 USB 3.0 Gigabit Ethernet [ 2041.598224] ax88179_178a 3-1.1:1.0 eth1: Failed to read reg index 0x0002: -19 [ 2041.598230] ax88179_178a 3-1.1:1.0 eth1: Failed to write reg index 0x0002: -19 [ 2041.633793] ax88179_178a 3-1.1:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19 [ 2041.633797] ax88179_178a 3-1.1:1.0 (unregistered net_device): Failed to write reg index 0x0001: -19 [ 2041.633800] ax88179_178a 3-1.1:1.0 (unregistered net_device): Failed to write reg index 0x0002: -19 [ 2041.633838] usb 3-1.1: Failed to set U1 timeout to 0x0,error code -19 [ 2041.633997] usb 3-1.1: Failed to set U1 timeout to 0x29,error code -19 [ 2041.634000] usb 3-1.1: Failed to set U2 timeout to 0x28,error code -19 [ 2054.589794] usb 2-2: new low-speed USB device number 5 using xhci_hcd [ 2054.611844] usb 2-2: New USB device found, idVendor=046d, idProduct=c317 [ 2054.611849] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2054.611851] usb 2-2: Product: USB Multimedia Keyboard [ 2054.611854] usb 2-2: Manufacturer: Logitech [ 2054.612073] usb 2-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 2054.612079] usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2054.644388] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/input/input16 [ 2054.644607] hid-generic 0003:046D:C317.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:14.0-2/input0 [ 2054.645918] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/input/input17 [ 2054.648774] hid-generic 0003:046D:C317.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:14.0-2/input1 [ 2063.715391] usb 2-1: new low-speed USB device number 6 using xhci_hcd [ 2063.738074] usb 2-1: New USB device found, idVendor=046d, idProduct=c043 [ 2063.738083] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2063.738088] usb 2-1: Product: USB-PS/2 Optical Mouse [ 2063.738093] usb 2-1: Manufacturer: Logitech [ 2063.738387] usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2063.742536] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input18 [ 2063.742877] hid-generic 0003:046D:C043.0005: input,hidraw4: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1/input0 [ 3247.568434] atkbd serio0: Unknown key pressed (translated set 2, code 0xf2 on isa0060/serio0). [ 3247.568443] atkbd serio0: Use 'setkeycodes e072 ' to make it known. [ 3247.576375] atkbd serio0: Unknown key released (translated set 2, code 0xf2 on isa0060/serio0). [ 3247.576382] atkbd serio0: Use 'setkeycodes e072 ' to make it known. [ 3248.837384] usb 2-2: USB disconnect, device number 5 [ 3249.303303] wlan0: deauthenticating from 08:5b:0e:8c:97:d7 by local choice (reason=3) [ 3249.306349] cfg80211: Calling CRDA to update world regulatory domain [ 3249.311991] cfg80211: World regulatory domain updated: [ 3249.311998] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3249.312005] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3249.312011] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3249.312017] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3249.312022] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3249.312027] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3249.913317] PM: Syncing filesystems ... done. [ 3249.920831] PM: Preparing system for mem sleep [ 3249.921050] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 3249.922728] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 3249.923892] PM: Entering mem sleep [ 3249.923937] Suspending console(s) (use no_console_suspend to debug) [ 3249.924759] sd 2:0:0:0: [sda] Synchronizing SCSI cache [ 3249.924798] sd 2:0:0:0: [sda] Stopping disk [ 3250.124855] psmouse serio1: Failed to disable mouse on isa0060/serio1 [ 3251.461714] PM: suspend of devices complete after 1536.721 msecs [ 3251.477806] PM: late suspend of devices complete after 16.074 msecs [ 3251.493827] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI [ 3251.525706] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI [ 3251.542355] PM: noirq suspend of devices complete after 64.505 msecs [ 3251.543336] ACPI: Preparing to enter system sleep state S3 [ 3251.544465] PM: Saving platform NVS memory [ 3251.545586] Disabling non-boot CPUs ... [ 3251.547196] kvm: disabling virtualization on CPU1 [ 3251.649727] smpboot: CPU 1 is now offline [ 3251.650787] Broke affinity for irq 59 [ 3251.651817] kvm: disabling virtualization on CPU2 [ 3251.753794] smpboot: CPU 2 is now offline [ 3251.754815] Broke affinity for irq 56 [ 3251.755846] kvm: disabling virtualization on CPU3 [ 3251.857848] smpboot: CPU 3 is now offline [ 3251.860930] ACPI: Low-level resume complete [ 3251.860997] PM: Restoring platform NVS memory [ 3251.861552] Enabling non-boot CPUs ... [ 3251.861592] x86: Booting SMP configuration: [ 3251.861593] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 3251.874102] kvm: enabling virtualization on CPU1 [ 3251.876488] CPU1 is up [ 3251.876506] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 3251.888663] kvm: enabling virtualization on CPU2 [ 3251.891040] CPU2 is up [ 3251.891056] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 3251.903150] kvm: enabling virtualization on CPU3 [ 3251.905469] CPU3 is up [ 3251.909633] ACPI: Waking up from system sleep state S3 [ 3252.077034] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI [ 3252.125065] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI [ 3252.157209] PM: noirq resume of devices complete after 234.024 msecs [ 3252.157416] PM: early resume of devices complete after 0.185 msecs [ 3252.157507] usb usb2: root hub lost power or was reset [ 3252.157508] usb usb3: root hub lost power or was reset [ 3252.157540] snd_hda_intel 0000:00:03.0: irq 58 for MSI/MSI-X [ 3252.158619] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X [ 3252.158666] mei_me 0000:00:16.0: irq 61 for MSI/MSI-X [ 3252.158758] snd_hda_intel 0000:00:1b.0: irq 62 for MSI/MSI-X [ 3252.261485] dpm_run_callback(): pnp_bus_resume+0x0/0xa0 returns -19 [ 3252.261486] PM: Device 00:06 failed to resume: error -19 [ 3252.385185] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 3252.493274] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3252.495497] ata3.00: configured for UDMA/133 [ 3252.509286] ahci 0000:00:1f.2: port does not support device sleep [ 3252.509331] sd 2:0:0:0: [sda] Starting disk [ 3252.629413] usb 2-3: reset full-speed USB device number 2 using xhci_hcd [ 3252.645783] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036abdd00 [ 3252.645784] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036abdd40 [ 3252.757517] usb 2-6: reset full-speed USB device number 4 using xhci_hcd [ 3252.774183] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036af80c0 [ 3252.774184] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036af8100 [ 3252.774184] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880036af8140 [ 3252.774185] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020f868000 [ 3252.774186] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020f868040 [ 3253.033713] usb 2-1: reset low-speed USB device number 6 using xhci_hcd [ 3253.052414] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8801ba576840 [ 3253.052418] usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3253.161715] i2c_designware INT33C3:00: controller timed out [ 3253.166126] PM: resume of devices complete after 1008.088 msecs [ 3253.166407] PM: Finishing wakeup. [ 3253.168892] iwlwifi 0000:02:00.0: no hotplug settings from platform [ 3253.169492] pci_bus 0000:01: Allocating resources [ 3253.169501] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 3253.169503] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 [ 3253.169505] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 [ 3253.169511] pci_bus 0000:02: Allocating resources [ 3253.169530] pcieport 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 3253.169531] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 [ 3253.169534] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3253.169537] pcieport 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 [ 3253.169539] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 3253.169540] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 3253.169541] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 3253.169542] pcieport 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 3253.169545] pcieport 0000:00:1c.0: BAR 14: assigned [mem 0xdfb00000-0xdfcfffff] [ 3253.169547] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xdfd00000-0xdfefffff 64bit pref] [ 3253.169549] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref] [ 3253.169552] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 3253.169554] pcieport 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff] [ 3253.169558] pci 0000:00:00.0: no hotplug settings from platform [ 3253.169559] pci 0000:00:00.0: using default PCI settings [ 3253.169563] i915 0000:00:02.0: no hotplug settings from platform [ 3253.169564] i915 0000:00:02.0: using default PCI settings [ 3253.169568] snd_hda_intel 0000:00:03.0: no hotplug settings from platform [ 3253.169570] xhci_hcd 0000:00:14.0: no hotplug settings from platform [ 3253.169571] xhci_hcd 0000:00:14.0: using default PCI settings [ 3253.169577] mei_me 0000:00:16.0: no hotplug settings from platform [ 3253.169578] mei_me 0000:00:16.0: using default PCI settings [ 3253.169583] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform [ 3253.169585] pcieport 0000:00:1c.0: no hotplug settings from platform [ 3253.169587] pcieport 0000:00:1c.2: no hotplug settings from platform [ 3253.169608] iwlwifi 0000:02:00.0: no hotplug settings from platform [ 3253.169610] ehci-pci 0000:00:1d.0: no hotplug settings from platform [ 3253.169611] ehci-pci 0000:00:1d.0: using default PCI settings [ 3253.169617] lpc_ich 0000:00:1f.0: no hotplug settings from platform [ 3253.169618] lpc_ich 0000:00:1f.0: using default PCI settings [ 3253.169625] ahci 0000:00:1f.2: no hotplug settings from platform [ 3253.169626] ahci 0000:00:1f.2: using default PCI settings [ 3253.169630] pci 0000:00:1f.3: no hotplug settings from platform [ 3253.169631] pci 0000:00:1f.3: using default PCI settings [ 3253.166408] Restarting tasks ... done. [ 3253.171143] pci_bus 0000:01: Allocating resources [ 3253.171156] pci_bus 0000:02: Allocating resources [ 3253.171177] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment [ 3253.171183] pci 0000:00:00.0: no hotplug settings from platform [ 3253.171184] pci 0000:00:00.0: using default PCI settings [ 3253.171188] i915 0000:00:02.0: no hotplug settings from platform [ 3253.171189] i915 0000:00:02.0: using default PCI settings [ 3253.171193] snd_hda_intel 0000:00:03.0: no hotplug settings from platform [ 3253.171195] xhci_hcd 0000:00:14.0: no hotplug settings from platform [ 3253.171196] xhci_hcd 0000:00:14.0: using default PCI settings [ 3253.171202] mei_me 0000:00:16.0: no hotplug settings from platform [ 3253.171203] mei_me 0000:00:16.0: using default PCI settings [ 3253.171209] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform [ 3253.171211] pcieport 0000:00:1c.0: no hotplug settings from platform [ 3253.171213] pcieport 0000:00:1c.2: no hotplug settings from platform [ 3253.171234] iwlwifi 0000:02:00.0: no hotplug settings from platform [ 3253.171237] ehci-pci 0000:00:1d.0: no hotplug settings from platform [ 3253.171239] ehci-pci 0000:00:1d.0: using default PCI settings [ 3253.171246] lpc_ich 0000:00:1f.0: no hotplug settings from platform [ 3253.171247] lpc_ich 0000:00:1f.0: using default PCI settings [ 3253.171255] ahci 0000:00:1f.2: no hotplug settings from platform [ 3253.171256] ahci 0000:00:1f.2: using default PCI settings [ 3253.171260] pci 0000:00:1f.3: no hotplug settings from platform [ 3253.171261] pci 0000:00:1f.3: using default PCI settings [ 3253.179349] Bluetooth: hci0: read Intel version: 370710018002030d00 [ 3253.190295] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq [ 3253.213193] video LNXVIDEO:00: Restoring backlight state [ 3253.278434] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated [ 3253.281066] dell_wmi: Unknown key e00e pressed [ 3253.333768] usb 2-2: new low-speed USB device number 7 using xhci_hcd [ 3253.355905] usb 2-2: New USB device found, idVendor=046d, idProduct=c317 [ 3253.355908] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3253.355910] usb 2-2: Product: USB Multimedia Keyboard [ 3253.355912] usb 2-2: Manufacturer: Logitech [ 3253.355992] usb 2-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 3253.355996] usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3253.358765] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/input/input19 [ 3253.358980] hid-generic 0003:046D:C317.0006: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:14.0-2/input0 [ 3253.361783] psmouse serio1: synaptics: device claims to have max coordinates query, but I'm not able to read it. [ 3253.364708] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/input/input20 [ 3253.364775] hid-generic 0003:046D:C317.0007: input,hidraw3: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:14.0-2/input1 [ 3253.364824] usb 2-5: USB disconnect, device number 3 [ 3253.561937] psmouse serio1: synaptics: device claims to have min coordinates query, but I'm not able to read it. [ 3253.629975] usb 2-5: new high-speed USB device number 8 using xhci_hcd [ 3253.699919] usb 2-5: New USB device found, idVendor=0bda, idProduct=5752 [ 3253.699921] usb 2-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 3253.699923] usb 2-5: Product: Integrated_Webcam_HD [ 3253.699924] usb 2-5: Manufacturer: CN0Y2TKG7248747BDKA9A00 [ 3253.699925] usb 2-5: SerialNumber: 200901010001 [ 3253.705584] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0bda:5752) [ 3253.715146] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input21 [ 3253.762060] psmouse serio1: synaptics: Unable to initialize device. [ 3253.830117] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 3254.225726] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3254.225983] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled [ 3254.238325] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3256.344085] dell_wmi: Unknown key e00e pressed [ 3257.440975] dell_wmi: Unknown key e00e pressed [ 3259.429707] dell_wmi: Unknown key e00e pressed [ 3261.345299] wlan0: authenticate with 08:5b:0e:8c:97:d7 [ 3261.347354] wlan0: send auth to 08:5b:0e:8c:97:d7 (try 1/3) [ 3261.350401] wlan0: authenticated [ 3261.354728] wlan0: associate with 08:5b:0e:8c:97:d7 (try 1/3) [ 3261.359886] wlan0: RX AssocResp from 08:5b:0e:8c:97:d7 (capab=0x431 status=0 aid=2) [ 3261.360921] wlan0: associated [ 3261.360944] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3261.361015] cfg80211: Calling CRDA for country: GB [ 3261.363210] cfg80211: Regulatory domain changed to country: GB [ 3261.363213] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3261.363215] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3261.363217] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3261.363219] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3261.363220] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 3261.363222] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 3262.525003] wlan0: deauthenticating from 08:5b:0e:8c:97:d7 by local choice (reason=2) [ 3262.527900] cfg80211: Calling CRDA to update world regulatory domain [ 3262.528245] wlan0: authenticate with 08:5b:0e:8c:97:d7 [ 3262.530018] wlan0: send auth to 08:5b:0e:8c:97:d7 (try 1/3) [ 3262.532753] cfg80211: World regulatory domain updated: [ 3262.532760] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3262.532765] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3262.532769] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3262.532772] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 3262.532775] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3262.532778] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 3262.533308] wlan0: authenticated [ 3262.535458] wlan0: associate with 08:5b:0e:8c:97:d7 (try 1/3) [ 3262.541592] wlan0: RX AssocResp from 08:5b:0e:8c:97:d7 (capab=0x431 status=0 aid=2) [ 3262.542743] wlan0: associated [ 3262.542798] cfg80211: Calling CRDA for country: GB [ 3262.545179] cfg80211: Regulatory domain changed to country: GB [ 3262.545183] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3262.545185] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3262.545187] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3262.545188] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3262.545190] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm) [ 3262.545191] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 3649.593389] usb 2-2: USB disconnect, device number 7 [ 3654.929267] usb 2-1: USB disconnect, device number 6 [ 3661.865335] usb 3-1: new SuperSpeed USB device number 6 using xhci_hcd [ 3662.120646] usb 3-1: New USB device found, idVendor=2109, idProduct=0812 [ 3662.120656] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3662.120661] usb 3-1: Product: USB3.0 Hub [ 3662.120664] usb 3-1: Manufacturer: VIA Labs, Inc. [ 3662.122939] hub 3-1:1.0: USB hub found [ 3662.123098] hub 3-1:1.0: 4 ports detected [ 3662.493743] usb 3-1.1: new SuperSpeed USB device number 7 using xhci_hcd [ 3662.516342] usb 3-1.1: New USB device found, idVendor=0b95, idProduct=1790 [ 3662.516345] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3662.516346] usb 3-1.1: Product: AX88179 [ 3662.516347] usb 3-1.1: Manufacturer: ASIX Elec. Corp. [ 3662.516348] usb 3-1.1: SerialNumber: 000000000005C2 [ 3662.839712] ax88179_178a 3-1.1:1.0 eth0: register 'ax88179_178a' at usb-0000:00:14.0-1.1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:23:56:4c:07:28 [ 3662.878071] systemd-udevd[5486]: renamed network interface eth0 to eth1 [ 3663.208879] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 3663.209914] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready