[    8.878588] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.003120] init: plymouth-upstart-bridge main process ended, respawning
[    9.243958] ath10k_pci 0000:02:00.0: qca6174 hw2.1 (0x05010000, 0x003405ff, 168c:003e:105b:e08e fallback) fw rome-hw2.1-v211-michalk api 2 htt 3.0 wmi 4 cal otp max_sta 32
[    9.243963] ath10k_pci 0000:02:00.0: debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
[    9.265615] vgaarb: this pci device is not a vga device
[    9.268822] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[    9.268874] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[    9.268904] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[    9.268948] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[    9.268974] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[    9.269000] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[    9.269056] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[    9.269083] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[    9.287467] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20141107/nsarguments-95)
[    9.321363] ath: EEPROM regdomain: 0x6c
[    9.321365] ath: EEPROM indicates we should expect a direct regpair map
[    9.321367] ath: Country alpha2 being used: 00
[    9.321367] ath: Regpair used: 0x6c
[    9.498608] init: plymouth-stop pre-start process (1515) terminated with status 1
[    9.712722] vgaarb: this pci device is not a vga device
[   10.661602] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   15.379382] wlan0: authenticate with 00:24:fe:03:86:71
[   15.434187] wlan0: send auth to 00:24:fe:03:86:71 (try 1/3)
[   15.436270] wlan0: authenticated
[   15.437295] wlan0: associate with 00:24:fe:03:86:71 (try 1/3)
[   15.441007] wlan0: RX AssocResp from 00:24:fe:03:86:71 (capab=0x431 status=0 aid=3)
[   15.444523] wlan0: associated
[   15.444555] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready