package linux-image-3.19.0-25-generic 3.19.0-25.26 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[Richard BONNEAU]

version :
Ubuntu 3.19.0-26.28-generic 3.19.8-ckt4

lspci vnvn .log

00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
 Subsystem: Dell Device [1028:0233]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information: Len=0a <?>
 Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 28
 Region 0: Memory at f6c00000 (64-bit, non-prefetchable) [size=4M]
 Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
 Region 4: I/O ports at ef98 [size=8]
 Expansion ROM at <unassigned> [disabled]
 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee0300c Data: 41b2
 Capabilities: [d0] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Region 0: Memory at f6b00000 (64-bit, non-prefetchable) [size=1M]
 Capabilities: [d0] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 27
 Region 0: Memory at f6ae0000 (32-bit, non-prefetchable) [size=128K]
 Region 1: Memory at f6adb000 (32-bit, non-prefetchable) [size=4K]
 Region 2: I/O ports at efe0 [size=32]
 Capabilities: [c8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee0100c Data: 41e2
 Capabilities: [e0] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 20
 Region 4: I/O ports at 6f60 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 21
 Region 4: I/O ports at 6f80 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 22
 Region 4: I/O ports at 6fa0 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
 Subsystem: Dell Device [1028:0233]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 22
 Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Capabilities: [98] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
 Subsystem: Dell Device [1028:0233]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 29
 Region 0: Memory at f6adc000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee0300c Data: 41c2
 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
 Capabilities: [100 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed- WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
   Status: NegoPending- InProgress-
  VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
   Status: NegoPending- InProgress-
 Capabilities: [130 v1] Root Complex Link
  Desc: PortNumber=0f ComponentID=02 EltType=Config
  Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
   Addr: 00000000fed18000
 Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
 I/O behind bridge: 00002000-00002fff
 Memory behind bridge: 40000000-401fffff
 Prefetchable memory behind bridge: 0000000040200000-00000000403fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
   ClockPM- Surprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
   Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee0300c Data: 41d1
 Capabilities: [90] Subsystem: Dell Device [1028:0233]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed+ WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
   Status: NegoPending- InProgress-
 Capabilities: [180 v1] Root Complex Link
  Desc: PortNumber=01 ComponentID=02 EltType=Config
  Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
   Addr: 00000000fed18000
 Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
 I/O behind bridge: 00003000-00003fff
 Memory behind bridge: f6900000-f69fffff
 Prefetchable memory behind bridge: 0000000040400000-00000000405fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
   ClockPM- Surprise- LLActRep+ BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
   Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee0300c Data: 4122
 Capabilities: [90] Subsystem: Dell Device [1028:0233]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed+ WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
   Status: NegoPending- InProgress-
 Capabilities: [180 v1] Root Complex Link
  Desc: PortNumber=02 ComponentID=02 EltType=Config
  Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
   Addr: 00000000fed18000
 Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
 I/O behind bridge: 00004000-00004fff
 Memory behind bridge: 40600000-407fffff
 Prefetchable memory behind bridge: 0000000040800000-00000000409fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0
   ExtTag- RBE+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
   ClockPM- Surprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
   Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee0300c Data: 4152
 Capabilities: [90] Subsystem: Dell Device [1028:0233]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed+ WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
   Status: NegoPending- InProgress-
 Capabilities: [180 v1] Root Complex Link
  Desc: PortNumber=03 ComponentID=02 EltType=Config
  Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
   Addr: 00000000fed18000
 Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 20
 Region 4: I/O ports at 6f00 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 21
 Region 4: I/O ports at 6f20 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 22
 Region 4: I/O ports at 6f40 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
 Subsystem: Dell Device [1028:0233]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 20
 Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Capabilities: [98] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=03, subordinate=07, sec-latency=32
 I/O behind bridge: 00005000-00005fff
 Memory behind bridge: f6800000-f68fffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Subsystem: Dell Device [1028:0233]

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information: Len=0c <?>
 Kernel driver in use: lpc_ich

00:1f.2 IDE interface [0101]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] [8086:2928] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 19
 Region 0: I/O ports at 6e70 [size=8]
 Region 1: I/O ports at 6e78 [size=4]
 Region 2: I/O ports at 6e80 [size=8]
 Region 3: I/O ports at 6e88 [size=4]
 Region 4: I/O ports at 6ea0 [size=16]
 Region 5: I/O ports at 6e90 [size=16]
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin B routed to IRQ 3
 Region 0: Memory at f6adaf00 (64-bit, non-prefetchable) [size=256]
 Region 4: I/O ports at 1100 [size=32]

00:1f.5 IDE interface [0101]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode] [8086:292d] (rev 03) (prog-if 85 [Master SecO PriO])
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 19
 Region 0: I/O ports at 6eb0 [size=8]
 Region 1: I/O ports at 6eb8 [size=4]
 Region 2: I/O ports at 6ec0 [size=8]
 Region 3: I/O ports at 6ec8 [size=4]
 Region 4: I/O ports at 6ee0 [size=16]
 Region 5: I/O ports at efa0 [size=16]
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [b0] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ata_piix

03:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ba)
 Subsystem: Dell Device [1028:0233]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168
 Interrupt: pin A routed to IRQ 19
 Region 0: Memory at 44000000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=03, secondary=04, subordinate=07, sec-latency=176
 Memory window 0: 48000000-4bffffff (prefetchable)
 Memory window 1: 4c000000-4fffffff
 I/O window 0: 00005000-000050ff
 I/O window 1: 00005400-000054ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
  Bridge: PM- B3+
 Kernel driver in use: yenta_cardbus

03:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 04) (prog-if 10 [OHCI])
 Subsystem: Dell Device [1028:0233]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 17
 Region 0: Memory at f68ff800 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
 Kernel driver in use: firewire_ohci

03:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 21) (prog-if 01)
 Subsystem: Dell Device [1028:0233]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64, Cache Line Size: 64 bytes
 Interrupt: pin C routed to IRQ 18
 Region 0: Memory at f68ff600 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
 Kernel driver in use: sdhci-pci

0c:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
 Subsystem: Dell Wireless 1397 WLAN Mini-Card [1028:000c]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 17
 Region 0: Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [40] Power Management version 3
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
 Capabilities: [58] Vendor Specific Information: Len=78 <?>
 Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
  Address: 0000000000000000 Data: 0000
 Capabilities: [d0] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
   ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <4us, L1 <64us
   ClockPM+ Surprise- LLActRep- BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100 v1] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [13c v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed- WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
   Status: NegoPending- InProgress-
 Capabilities: [160 v1] Device Serial Number a1-08-2c-ff-ff-8c-00-24
 Capabilities: [16c v1] Power Budgeting <?>
 Kernel driver in use: b43-pci-bridge

ProblemType: Package
DistroRelease: Ubuntu 15.04
Package: linux-image-3.19.0-25-generic 3.19.0-25.26
ProcVersionSignature: Ubuntu 3.19.0-26.28-generic 3.19.8-ckt4
Uname: Linux 3.19.0-26-generic i686
ApportVersion: 2.17.2-0ubuntu1.3
Architecture: i386
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: richard 1548 F.... pulseaudio
Date: Thu Aug 13 22:20:01 2015
DuplicateSignature: package:linux-image-3.19.0-25-generic:3.19.0-25.26:subprocess installed post-installation script returned error exit status 1
ErrorMessage: subprocess installed post-installation script returned error exit status 1
HibernationDevice: RESUME=UUID=488eb1a2-df59-4fce-8fa5-04eab31e6aba
InstallationDate: Installed on 2015-07-09 (36 days ago)
InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release i386 (20141022.1)
MachineType: Dell Inc. Latitude E6400
PccardctlIdent:
 Socket 0:
   no product info available
PccardctlStatus:
 Socket 0:
   no card
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-26-generic root=UUID=b0b941b4-eb39-4178-b48d-f8d62cf50e6b ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
RelatedPackageVersions: grub-pc 2.02~beta2-22ubuntu1.1
SourcePackage: linux
Title: package linux-image-3.19.0-25-generic 3.19.0-25.26 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
UpgradeStatus: Upgraded to vivid on 2015-07-09 (36 days ago)
dmi.bios.date: 02/13/2009
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A12
dmi.board.name: 0H635N
dmi.board.vendor: Dell Inc.
dmi.chassis.type: 8
dmi.chassis.vendor: Dell Inc.
dmi.modalias: dmi:bvnDellInc.:bvrA12:bd02/13/2009:svnDellInc.:pnLatitudeE6400:pvr:rvnDellInc.:rn0H635N:rvr:cvnDellInc.:ct8:cvr:
dmi.product.name: Latitude E6400
dmi.sys.vendor: Dell Inc.

[Brad Figg (brad-figg)]

This change was made by a bot.

[Ubuntu Foundations Team Bug Bot (crichton)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. Reviewing your dmesg attachment in this bug report it seems that there is a problem with your hardware. I recommend performing a back up and then investigating the situation. Measures you might take include checking cable connections and using software tools to investigate the health of your hardware. In the event that is is not in fact an error with your hardware please set the bug's status back to New. Thanks and good luck!

[This is an automated message. I apologize if it reached you inappropriately; please just reply to this message indicating so.]

[Urop (urop)]

I've got this too. The crash reporter told me so and opened up this web-page for me, asking me to comment.

This doesn't appear to be a hardware problem to me. Why has my computer been running fine for years with all kernels up to an including 3.19.0.22 then? It feels more like Ubuntu is choosing not to support my hardware any more, and rather than telling me that and ensuring that I don't get given updates that would break my computer, it has chosen to simply apply updates in a way that brick it. Thanks! This bug caused the install of kernel 3.19.0.25 to complete but with errors like so:

depmod: ../libkmod/libkmod-elf.c:207: elf_get_mem: Assertion `offset < elf->size' failed.
Failed to run depmod
...
dpkg: error processing package linux-image-generic (--configure):
 dependency problems - leaving unconfigured

in such a way that when my computer reboots it goes straight into initramfs claiming it can't find a disk... and yet it runs fine when I choose kernel 3.19.0.22 from the grub menu. I've run a full disk-check and memory check from the bios and it didn't identify any problems.

In my opinion, this should be classed as "Importance -> High, Confirmed -> Valid". Thank you.