[   30.717723] input: eGalaxTouch Virtual Device for Single as /devices/virtual/input/input21
[   31.619769] vboxdrv: Found 4 processor cores.
[   31.619955] vboxdrv: fAsync=0 offMin=0x20c offMax=0x13c4
[   31.620023] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[   31.620025] vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
[   31.633645] vboxpci: IOMMU not found (not registered)
[   32.042784] CIFS VFS: Error connecting to socket. Aborting operation.
[   32.043078] CIFS VFS: Error connecting to socket. Aborting operation.
[   32.043440] CIFS VFS: cifs_mount failed w/return code = -101
[   32.044960] CIFS VFS: Error connecting to socket. Aborting operation.
[   32.045023] CIFS VFS: cifs_mount failed w/return code = -101
[   32.070300] CIFS VFS: cifs_mount failed w/return code = -101
[   33.647165] init: plymouth-stop pre-start process (1919) terminated with status 1
[   33.900735] input: Razer Razer Naga 2014 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input22
[   33.900936] hid-generic 0003:1532:0040.0005: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Naga 2014] on usb-0000:00:14.0-4/input0
[   34.161707] input: Razer Razer Naga 2014 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input23
[   34.161926] hid-generic 0003:1532:0040.0006: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Naga 2014] on usb-0000:00:14.0-4/input0
[   54.353848] CIFS VFS: Error connecting to socket. Aborting operation.
[   54.353913] CIFS VFS: cifs_mount failed w/return code = -101
[   54.355341] CIFS VFS: Error connecting to socket. Aborting operation.
[   54.355420] CIFS VFS: cifs_mount failed w/return code = -101
[   54.355856] CIFS VFS: Error connecting to socket. Aborting operation.
[   54.355907] CIFS VFS: cifs_mount failed w/return code = -101
[   55.417776] audit_printk_skb: 153 callbacks suppressed
[   55.417779] type=1400 audit(1439258651.297:73): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2273 comm="apparmor_parser"
[   55.417784] type=1400 audit(1439258651.297:74): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2273 comm="apparmor_parser"
[   55.418129] type=1400 audit(1439258651.301:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2273 comm="apparmor_parser"
[   68.383120] ahci 0000:00:1f.2: port does not support device sleep
[   75.785608] wlan0: authenticate with 04:a1:51:7f:e0:50
[   75.789886] wlan0: send auth to 04:a1:51:7f:e0:50 (try 1/3)
[   75.792151] wlan0: authenticated
[   75.795215] wlan0: associate with 04:a1:51:7f:e0:50 (try 1/3)
[   75.799141] wlan0: RX AssocResp from 04:a1:51:7f:e0:50 (capab=0x411 status=0 aid=3)
[   75.800270] wlan0: associated
[   75.800306] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   80.049626] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[   80.049634] CIFS VFS: Send error in SessSetup = -13
[   80.049716] CIFS VFS: cifs_mount failed w/return code = -13
[   80.061508] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[   80.061516] CIFS VFS: Send error in SessSetup = -13
[   80.061602] CIFS VFS: cifs_mount failed w/return code = -13
[   80.064633] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[   80.064640] CIFS VFS: Send error in SessSetup = -13
[   80.064724] CIFS VFS: cifs_mount failed w/return code = -13
[   80.316278] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[   80.316286] CIFS VFS: Send error in SessSetup = -13
[   80.316396] CIFS VFS: cifs_mount failed w/return code = -13
[   80.335720] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[   80.335729] CIFS VFS: Send error in SessSetup = -13
[   80.335828] CIFS VFS: cifs_mount failed w/return code = -13
[   96.356203] r8169 0000:03:00.0 eth0: link up
[   96.356212] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  102.076020] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[  102.076030] CIFS VFS: Send error in SessSetup = -13
[  102.076120] CIFS VFS: cifs_mount failed w/return code = -13
[  102.078419] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[  102.078435] CIFS VFS: Send error in SessSetup = -13
[  102.078526] CIFS VFS: cifs_mount failed w/return code = -13
[ 4168.190480] ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
[ 4168.223978] usb 2-6: USB disconnect, device number 4
[ 4173.661403] PM: Syncing filesystems ... done.
[ 4173.856506] PM: Preparing system for mem sleep
[ 4173.856849] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 4173.858811] Freezing remaining freezable tasks ... (elapsed 1.753 seconds) done.
[ 4175.611784] PM: Entering mem sleep
[ 4175.612162] Suspending console(s) (use no_console_suspend to debug)
[ 4175.612386] wlan0: deauthenticating from 04:a1:51:7f:e0:50 by local choice (reason=3)
[ 4175.633625] cfg80211: Calling CRDA to update world regulatory domain
[ 4175.633660] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[ 4175.633702] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4175.635961] sd 1:0:0:0: [sdb] Stopping disk
[ 4175.646175] sd 0:0:0:0: [sda] Stopping disk
[ 4176.716538] PM: suspend of devices complete after 1104.760 msecs
[ 4176.730785] PM: late suspend of devices complete after 14.250 msecs
[ 4176.731041] pcieport 0000:00:1c.2: System wakeup enabled by ACPI
[ 4176.762964] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 4176.794697] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 4176.811061] PM: noirq suspend of devices complete after 80.314 msecs
[ 4176.811429] ACPI: Preparing to enter system sleep state S3
[ 4176.854679] PM: Saving platform NVS memory
[ 4176.860030] Disabling non-boot CPUs ...
[ 4176.860296] Broke affinity for irq 62
[ 4176.861307] kvm: disabling virtualization on CPU1
[ 4176.962579] smpboot: CPU 1 is now offline
[ 4176.964175] kvm: disabling virtualization on CPU2
[ 4177.066524] smpboot: CPU 2 is now offline
[ 4177.067049] Broke affinity for irq 23
[ 4177.067054] Broke affinity for irq 61
[ 4177.067056] Broke affinity for irq 65
[ 4177.068064] kvm: disabling virtualization on CPU3
[ 4177.170477] smpboot: CPU 3 is now offline
[ 4177.172403] ACPI: Low-level resume complete
[ 4177.172463] PM: Restoring platform NVS memory
[ 4177.174088] Enabling non-boot CPUs ...
[ 4177.174128] x86: Booting SMP configuration:
[ 4177.174129] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 4177.186236] kvm: enabling virtualization on CPU1
[ 4177.188589] CPU1 is up
[ 4177.188608] smpboot: Booting Node 0 Processor 2 APIC 0x1
[ 4177.200655] kvm: enabling virtualization on CPU2
[ 4177.203012] CPU2 is up
[ 4177.203027] smpboot: Booting Node 0 Processor 3 APIC 0x3
[ 4177.215077] kvm: enabling virtualization on CPU3
[ 4177.217403] CPU3 is up
[ 4177.223212] ACPI: Waking up from system sleep state S3
[ 4177.269676] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 4177.317660] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 4177.365779] PM: noirq resume of devices complete after 142.104 msecs
[ 4177.365910] PM: early resume of devices complete after 0.111 msecs
[ 4177.366056] snd_hda_intel 0000:00:03.0: irq 63 for MSI/MSI-X
[ 4177.368819] mei_me 0000:00:16.0: irq 64 for MSI/MSI-X
[ 4177.369228] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X
[ 4177.369762] pcieport 0000:00:1c.2: System wakeup disabled by ACPI
[ 4177.383903] r8169 0000:03:00.0 eth0: link down
[ 4177.689673] usb 2-5: reset high-speed USB device number 3 using xhci_hcd
[ 4177.705451] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4177.708465] ata2.00: configured for UDMA/133
[ 4177.721444] ahci 0000:00:1f.2: port does not support device sleep
[ 4177.721472] sd 1:0:0:0: [sdb] Starting disk
[ 4177.751268] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880224303e40
[ 4177.873577] usb 2-4: reset full-speed USB device number 2 using xhci_hcd
[ 4177.889777] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021fdbbb40
[ 4177.889778] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021fdbba80
[ 4177.889779] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021fdbbac0
[ 4178.001420] usb 2-8: reset full-speed USB device number 5 using xhci_hcd
[ 4178.017822] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021fcd6780
[ 4178.017823] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021fcd67c0
[ 4178.017825] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021fcd6800
[ 4178.017826] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021fd04f80
[ 4178.017828] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88021fd04fc0
[ 4178.656960] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 4179.890785] r8169 0000:03:00.0 eth0: link up
[ 4180.280151] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4180.283814] ata1.00: configured for UDMA/100
[ 4180.300217] sd 0:0:0:0: [sda] Starting disk
[ 4180.311221] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 4180.311713] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled
[ 4180.329983] PM: resume of devices complete after 2965.593 msecs
[ 4180.330340] PM: Finishing wakeup.
[ 4180.330718] iwlwifi 0000:01:00.0: no hotplug settings from platform
[ 4180.330746] r8169 0000:03:00.0: no hotplug settings from platform
[ 4180.330341] Restarting tasks ... done.
[ 4180.337889] cfg80211: World regulatory domain updated:
[ 4180.337898] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4180.337901] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4180.337902] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4180.337904] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4180.337906] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4180.337907] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4180.342883] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 4180.342891] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 4180.347481] pci 0000:04:00.0: no hotplug settings from platform
[ 4180.348438] pci_bus 0000:01: Allocating resources
[ 4180.348742] pcieport 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[ 4180.348746] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 4180.348753] pci_bus 0000:02: Allocating resources
[ 4180.348765] pci_bus 0000:03: Allocating resources
[ 4180.348777] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 4180.348784] pci_bus 0000:04: Allocating resources
[ 4180.348798] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4180.348806] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4180.348809] pcieport 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 4180.348812] pcieport 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[ 4180.348819] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xcf200000-0xcf3fffff 64bit pref]
[ 4180.348823] pcieport 0000:00:1c.2: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
[ 4180.348828] pcieport 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[ 4180.348840] pci 0000:00:00.0: no hotplug settings from platform
[ 4180.348842] pci 0000:00:00.0: using default PCI settings
[ 4180.348849] i915 0000:00:02.0: no hotplug settings from platform
[ 4180.348851] i915 0000:00:02.0: using default PCI settings
[ 4180.348857] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 4180.348862] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4180.348864] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4180.348872] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4180.348874] mei_me 0000:00:16.0: using default PCI settings
[ 4180.348882] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4180.348886] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4180.349033] iwlwifi 0000:01:00.0: no hotplug settings from platform
[ 4180.349037] pcieport 0000:00:1c.1: no hotplug settings from platform
[ 4180.349041] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4180.349050] r8169 0000:03:00.0: no hotplug settings from platform
[ 4180.349054] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 4180.349064] pci 0000:04:00.0: no hotplug settings from platform
[ 4180.349068] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4180.349070] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4180.349079] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4180.349081] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4180.349092] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4180.349094] ahci 0000:00:1f.2: using default PCI settings
[ 4180.349101] pci 0000:00:1f.3: no hotplug settings from platform
[ 4180.349103] pci 0000:00:1f.3: using default PCI settings
[ 4180.349111] pci 0000:00:1f.6: no hotplug settings from platform
[ 4180.349113] pci 0000:00:1f.6: using default PCI settings
[ 4180.352347] pci_bus 0000:01: Allocating resources
[ 4180.352503] pci_bus 0000:02: Allocating resources
[ 4180.352514] pci_bus 0000:03: Allocating resources
[ 4180.352528] pci_bus 0000:04: Allocating resources
[ 4180.352543] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[ 4180.352556] pci 0000:00:00.0: no hotplug settings from platform
[ 4180.352559] pci 0000:00:00.0: using default PCI settings
[ 4180.352566] i915 0000:00:02.0: no hotplug settings from platform
[ 4180.352568] i915 0000:00:02.0: using default PCI settings
[ 4180.352574] snd_hda_intel 0000:00:03.0: no hotplug settings from platform
[ 4180.352579] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[ 4180.352581] xhci_hcd 0000:00:14.0: using default PCI settings
[ 4180.352589] mei_me 0000:00:16.0: no hotplug settings from platform
[ 4180.352591] mei_me 0000:00:16.0: using default PCI settings
[ 4180.352600] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[ 4180.352604] pcieport 0000:00:1c.0: no hotplug settings from platform
[ 4180.352751] iwlwifi 0000:01:00.0: no hotplug settings from platform
[ 4180.352756] pcieport 0000:00:1c.1: no hotplug settings from platform
[ 4180.352760] pcieport 0000:00:1c.2: no hotplug settings from platform
[ 4180.352768] r8169 0000:03:00.0: no hotplug settings from platform
[ 4180.352772] pcieport 0000:00:1c.4: no hotplug settings from platform
[ 4180.352780] pci 0000:04:00.0: no hotplug settings from platform
[ 4180.352784] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[ 4180.352786] ehci-pci 0000:00:1d.0: using default PCI settings
[ 4180.352794] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[ 4180.352796] lpc_ich 0000:00:1f.0: using default PCI settings
[ 4180.352806] ahci 0000:00:1f.2: no hotplug settings from platform
[ 4180.352808] ahci 0000:00:1f.2: using default PCI settings
[ 4180.352815] pci 0000:00:1f.3: no hotplug settings from platform
[ 4180.352817] pci 0000:00:1f.3: using default PCI settings
[ 4180.352824] pci 0000:00:1f.6: no hotplug settings from platform
[ 4180.352826] pci 0000:00:1f.6: using default PCI settings
[ 4180.396060] video LNXVIDEO:00: Restoring backlight state
[ 4180.396065] video LNXVIDEO:01: Restoring backlight state
[ 4180.456029] usb 2-6: new full-speed USB device number 6 using xhci_hcd
[ 4180.458808] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 4180.473044] usb 2-6: New USB device found, idVendor=0eef, idProduct=791b
[ 4180.473047] usb 2-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4180.473049] usb 2-6: Product: eGalaxTouch EXC7904-06v01_Test1
[ 4180.473050] usb 2-6: Manufacturer: eGalax Inc.
[ 4180.475152] input: eGalax Inc. eGalaxTouch EXC7904-06v01_Test1 as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input27
[ 4180.475343] hid-multitouch 0003:0EEF:791B.0007: input,hiddev0,hidraw3: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC7904-06v01_Test1] on usb-0000:00:14.0-6/input0
[ 4180.628916] input: eGalax Inc. eGalaxTouch EXC7904-06v01_Test1 as /devices/pci0000:00/0000:00:14.0/usb2/2-6/2-6:1.0/input/input29
[ 4180.629098] hid-multitouch 0003:0EEF:791B.0007: input,hiddev0,hidraw0: USB HID v2.10 Device [eGalax Inc. eGalaxTouch EXC7904-06v01_Test1] on usb-0000:00:14.0-6/input0
[ 4180.693824] xbindkeys[11604]: segfault at 0 ip 00007f15f7a3445f sp 00007ffde5ac9ca8 error 4 in libc-2.19.so[7f15f7997000+1bb000]
[ 4180.822616] input: Razer Razer Naga 2014 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.0/input/input31
[ 4180.822849] hid-generic 0003:1532:0040.0008: input,hidraw3: USB HID v1.11 Mouse [Razer Razer Naga 2014] on usb-0000:00:14.0-4/input0
[ 4181.181066] wlan0: authenticate with 04:a1:51:7f:e0:50
[ 4181.186231] wlan0: send auth to 04:a1:51:7f:e0:50 (try 1/3)
[ 4181.190367] wlan0: authenticated
[ 4181.191620] wlan0: associate with 04:a1:51:7f:e0:50 (try 1/3)
[ 4181.195867] wlan0: RX AssocResp from 04:a1:51:7f:e0:50 (capab=0x411 status=0 aid=2)
[ 4181.196866] wlan0: associated
[ 4183.000626] input: eGalaxTouch Virtual Device for Multi as /devices/virtual/input/input32
[ 4183.000867] input: eGalaxTouch Virtual Device for Single as /devices/virtual/input/input33