[ 20.667207] audit: type=1400 audit(1438050923.664:61): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1049 comm="apparmor_parser" [ 21.841600] wlan0: authenticate with 18:9c:5d:6c:91:d0 [ 21.853792] wlan0: send auth to 18:9c:5d:6c:91:d0 (try 1/3) [ 21.969255] wlan0: send auth to 18:9c:5d:6c:91:d0 (try 2/3) [ 21.970742] wlan0: authenticated [ 21.973267] wlan0: associate with 18:9c:5d:6c:91:d0 (try 1/3) [ 22.077320] wlan0: associate with 18:9c:5d:6c:91:d0 (try 2/3) [ 22.079581] wlan0: RX AssocResp from 18:9c:5d:6c:91:d0 (capab=0x431 status=0 aid=3) [ 22.079626] wlan0: associated [ 22.079644] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 22.079672] cfg80211: Calling CRDA for country: TW [ 22.081274] ath: EEPROM regdomain: 0x809e [ 22.081276] ath: EEPROM indicates we should expect a country code [ 22.081277] ath: doing EEPROM country->regdmn map search [ 22.081278] ath: country maps to regdmn code: 0x50 [ 22.081279] ath: Country alpha2 being used: TW [ 22.081280] ath: Regpair used: 0x50 [ 22.081281] ath: regdomain 0x809e dynamically updated by country IE [ 22.081317] cfg80211: Regulatory domain changed to country: TW [ 22.081321] cfg80211: DFS Master region: unset [ 22.081324] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 22.081328] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 22.081331] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 22.081332] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 22.378044] wlan0: deauthenticated from 18:9c:5d:6c:91:d0 (Reason: 23=IEEE8021X_FAILED) [ 22.408132] wlan0: authenticate with 18:9c:5d:6c:91:d0 [ 22.414471] wlan0: send auth to 18:9c:5d:6c:91:d0 (try 1/3) [ 22.414545] cfg80211: Calling CRDA to update world regulatory domain [ 22.416100] cfg80211: World regulatory domain updated: [ 22.416103] cfg80211: DFS Master region: unset [ 22.416104] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 22.416106] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 22.416108] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 22.416109] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 22.416110] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 22.416111] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 22.418189] wlan0: authenticated [ 22.421530] wlan0: associate with 18:9c:5d:6c:91:d0 (try 1/3) [ 22.525596] wlan0: associate with 18:9c:5d:6c:91:d0 (try 2/3) [ 22.629646] wlan0: associate with 18:9c:5d:6c:91:d0 (try 3/3) [ 22.733721] wlan0: association with 18:9c:5d:6c:91:d0 timed out [ 25.359144] fglrx_pci 0000:01:00.0: irq 52 for MSI/MSI-X [ 25.359874] <6>[fglrx] Firegl kernel thread PID: 1209 [ 25.360043] <6>[fglrx] Firegl kernel thread PID: 1210 [ 25.360215] <6>[fglrx] Firegl kernel thread PID: 1211 [ 25.360321] <6>[fglrx] IRQ 52 Enabled [ 25.369271] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 25.369273] <6>[fglrx] Reserved FB block: Unshared offset:f7b4000, size:4000 [ 25.369274] <6>[fglrx] Reserved FB block: Unshared offset:f7b8000, size:548000 [ 25.369275] <6>[fglrx] Reserved FB block: Unshared offset:3fff3000, size:d000 [ 25.545027] vgaarb: this pci device is not a vga device [ 28.477476] vgaarb: this pci device is not a vga device [ 29.295337] init: plymouth-upstart-bridge main process ended, respawning [ 29.298601] init: plymouth-upstart-bridge main process (1321) terminated with status 1 [ 29.298608] init: plymouth-upstart-bridge main process ended, respawning [ 35.528081] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 35.535877] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 35.537347] wlan0: authenticated [ 35.537589] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 35.540127] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=12) [ 35.540173] wlan0: associated [ 35.540798] cfg80211: Calling CRDA for country: TW [ 35.542947] ath: EEPROM regdomain: 0x809e [ 35.542949] ath: EEPROM indicates we should expect a country code [ 35.542950] ath: doing EEPROM country->regdmn map search [ 35.542951] ath: country maps to regdmn code: 0x50 [ 35.542952] ath: Country alpha2 being used: TW [ 35.542953] ath: Regpair used: 0x50 [ 35.542954] ath: regdomain 0x809e dynamically updated by country IE [ 35.542973] cfg80211: Regulatory domain changed to country: TW [ 35.542974] cfg80211: DFS Master region: unset [ 35.542976] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 35.542977] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 35.542979] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 35.542980] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 45.661467] audit: type=1400 audit(1438050947.868:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2457 comm="apparmor_parser" [ 45.661475] audit: type=1400 audit(1438050947.868:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2457 comm="apparmor_parser" [ 45.661766] audit: type=1400 audit(1438050947.868:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2457 comm="apparmor_parser" [ 76.439035] Starting fwts hibernate [ 76.439051] Hibernate [ 76.639500] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 76.646087] cfg80211: Calling CRDA to update world regulatory domain [ 76.648028] cfg80211: World regulatory domain updated: [ 76.648031] cfg80211: DFS Master region: unset [ 76.648032] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 76.648034] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 76.648036] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 76.648037] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 76.648038] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 76.648039] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 76.706812] vgaarb: this pci device is not a vga device [ 77.328725] init: anacron main process (1032) killed by TERM signal [ 78.464431] vgaarb: this pci device is not a vga device [ 78.622860] PM: Syncing filesystems ... done. [ 78.721000] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 78.722497] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 78.722500] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 78.722501] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 78.722515] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 78.722520] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 78.722523] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 78.722525] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 78.722530] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 78.723084] PM: Basic memory bitmaps created [ 78.723132] PM: Preallocating image memory... [ 78.751885] hpet1: lost 1 rtc interrupts [ 78.885142] hpet1: lost 6 rtc interrupts [ 79.019381] done (allocated 363111 pages) [ 79.019384] PM: Allocated 1452444 kbytes in 0.29 seconds (5008.42 MB/s) [ 79.019386] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. [ 79.020344] Suspending console(s) (use no_console_suspend to debug) [ 79.026426] <6>[fglrx] IRQ 52 Disabled [ 79.026476] <6>[fglrx] Preparing suspend fglrx in kernel. [ 81.899751] <6>[fglrx] Suspending fglrx in kernel completed. [ 81.899752] <6>[fglrx] Power down the ASIC . [ 81.899927] PM: freeze of devices complete after 2877.816 msecs [ 81.900253] PM: late freeze of devices complete after 0.323 msecs [ 81.901011] PM: noirq freeze of devices complete after 0.757 msecs [ 81.901239] ACPI: Preparing to enter system sleep state S4 [ 81.901444] PM: Saving platform NVS memory [ 81.902186] Disabling non-boot CPUs ... [ 81.902221] intel_pstate CPU 1 exiting [ 81.902344] Broke affinity for irq 17 [ 81.903358] kvm: disabling virtualization on CPU1 [ 82.005982] smpboot: CPU 1 is now offline [ 82.006325] PM: Creating hibernation image: [ 82.234621] PM: Need to copy 363862 pages [ 82.234623] PM: Normal pages needed: 363862 + 1024, available pages: 3809384 [ 82.007012] PM: Restoring platform NVS memory [ 82.007432] Enabling non-boot CPUs ... [ 82.007463] x86: Booting SMP configuration: [ 82.007464] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 82.019311] kvm: enabling virtualization on CPU1 [ 82.021512] Intel pstate controlling: cpu 1 [ 82.021549] CPU1 is up [ 82.023153] ACPI: Waking up from system sleep state S4 [ 82.027199] PM: noirq restore of devices complete after 3.470 msecs [ 82.027414] PM: early restore of devices complete after 0.193 msecs [ 82.110693] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 82.110912] usb usb3: root hub lost power or was reset [ 82.110913] usb usb4: root hub lost power or was reset [ 82.111039] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 82.111087] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 82.111108] usb usb1: root hub lost power or was reset [ 82.112198] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 82.112333] usb usb2: root hub lost power or was reset [ 82.115000] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 82.116227] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 82.116251] ath: phy0: ASPM enabled: 0x43 [ 82.120280] <6>[fglrx] Power up the ASIC [ 82.150214] sd 0:0:0:0: [sda] Starting disk [ 82.467443] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 82.467466] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 82.467482] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 82.475444] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 82.486522] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 82.486524] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 82.486525] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 82.488103] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 82.488105] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 82.488106] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 82.488412] ata6.00: configured for UDMA/100 [ 82.490278] <6>[fglrx] Preparing resume fglrx in kernel. [ 82.515701] ata1.00: configured for UDMA/100 [ 82.627567] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 82.844548] <6>[fglrx] Resuming fglrx in kernel completed. [ 82.844609] <6>[fglrx] IRQ 52 Enabled [ 82.914393] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 82.914394] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 82.914398] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 82.914411] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 83.071948] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 83.299738] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 83.424138] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 83.552469] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 83.552470] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 83.664268] usb 3-10: reset full-speed USB device number 6 using xhci_hcd [ 83.792419] usb 3-10: device firmware changed [ 83.812359] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 83.832103] PM: restore of devices complete after 1720.566 msecs [ 83.832308] PM: Image restored successfully. [ 83.832348] PM: Basic memory bitmaps freed [ 83.832350] Restarting tasks ... done. [ 83.837375] usb 3-10: USB disconnect, device number 6 [ 83.837706] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880416c25300 [ 83.837708] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880416c25390 [ 83.837710] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880416c25348 [ 83.837711] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804168cb348 [ 83.837712] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804168cb300 [ 84.012491] usb 3-10: new full-speed USB device number 7 using xhci_hcd [ 84.141440] usb 3-10: New USB device found, idVendor=0cf3, idProduct=e005 [ 84.141443] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 84.235672] usb 3-10: USB disconnect, device number 7 [ 84.269401] FWTS_RESUME [ 84.269416] Finished fwts resume [ 84.290154] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 84.330675] r8169 0000:04:00.0 eth0: link down [ 84.330711] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 84.508719] usb 3-10: new full-speed USB device number 8 using xhci_hcd [ 86.038003] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 86.050126] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 86.051614] wlan0: authenticated [ 86.053690] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 86.056234] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=15) [ 86.056282] wlan0: associated [ 86.056298] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 86.056339] cfg80211: Calling CRDA for country: TW [ 86.061047] ath: EEPROM regdomain: 0x809e [ 86.061050] ath: EEPROM indicates we should expect a country code [ 86.061051] ath: doing EEPROM country->regdmn map search [ 86.061052] ath: country maps to regdmn code: 0x50 [ 86.061053] ath: Country alpha2 being used: TW [ 86.061054] ath: Regpair used: 0x50 [ 86.061055] ath: regdomain 0x809e dynamically updated by country IE [ 86.061074] cfg80211: Regulatory domain changed to country: TW [ 86.061075] cfg80211: DFS Master region: unset [ 86.061076] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 86.061078] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 86.061079] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 86.061080] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 86.068933] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 86.075525] cfg80211: Calling CRDA to update world regulatory domain [ 86.075562] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 86.081857] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 86.082506] cfg80211: World regulatory domain updated: [ 86.082509] cfg80211: DFS Master region: unset [ 86.082510] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 86.082512] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 86.082513] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 86.082514] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 86.082516] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 86.082517] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 86.083478] wlan0: authenticated [ 86.085646] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 86.088645] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=15) [ 86.088690] wlan0: associated [ 86.088714] cfg80211: Calling CRDA for country: TW [ 86.091368] ath: EEPROM regdomain: 0x809e [ 86.091370] ath: EEPROM indicates we should expect a country code [ 86.091371] ath: doing EEPROM country->regdmn map search [ 86.091372] ath: country maps to regdmn code: 0x50 [ 86.091373] ath: Country alpha2 being used: TW [ 86.091374] ath: Regpair used: 0x50 [ 86.091375] ath: regdomain 0x809e dynamically updated by country IE [ 86.091395] cfg80211: Regulatory domain changed to country: TW [ 86.091396] cfg80211: DFS Master region: unset [ 86.091397] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 86.091399] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 86.091400] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 86.091401] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 87.353408] Starting fwts hibernate [ 87.353426] Hibernate [ 87.553435] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 87.560053] cfg80211: Calling CRDA to update world regulatory domain [ 87.561627] cfg80211: World regulatory domain updated: [ 87.561630] cfg80211: DFS Master region: unset [ 87.561631] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 87.561633] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 87.561634] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 87.561635] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 87.561636] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 87.561637] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 87.606636] vgaarb: this pci device is not a vga device [ 87.796145] init: anacron main process (3523) killed by TERM signal [ 88.379675] vgaarb: this pci device is not a vga device [ 88.554503] PM: Syncing filesystems ... done. [ 88.630097] Freezing user space processes ... [ 89.640977] usb 3-10: New USB device found, idVendor=0cf3, idProduct=e005 [ 89.640989] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 89.648101] (elapsed 1.017 seconds) done. [ 89.648212] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 89.648215] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 89.648216] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 89.648230] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 89.648235] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 89.648238] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 89.648240] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 89.648245] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 89.648799] PM: Basic memory bitmaps created [ 89.648845] PM: Preallocating image memory... [ 89.811025] hpet1: lost 6 rtc interrupts [ 89.945937] done (allocated 364206 pages) [ 89.945940] PM: Allocated 1456824 kbytes in 0.29 seconds (5023.53 MB/s) [ 89.945941] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 89.947263] Suspending console(s) (use no_console_suspend to debug) [ 89.954198] <6>[fglrx] IRQ 52 Disabled [ 89.954259] <6>[fglrx] Preparing suspend fglrx in kernel. [ 92.829340] <6>[fglrx] Suspending fglrx in kernel completed. [ 92.829341] <6>[fglrx] Power down the ASIC . [ 92.829541] PM: freeze of devices complete after 2880.497 msecs [ 92.829862] PM: late freeze of devices complete after 0.319 msecs [ 92.830616] PM: noirq freeze of devices complete after 0.753 msecs [ 92.830845] ACPI: Preparing to enter system sleep state S4 [ 92.831052] PM: Saving platform NVS memory [ 92.831783] Disabling non-boot CPUs ... [ 92.831814] intel_pstate CPU 1 exiting [ 92.831934] Broke affinity for irq 16 [ 92.831938] Broke affinity for irq 47 [ 92.832941] kvm: disabling virtualization on CPU1 [ 92.933828] smpboot: CPU 1 is now offline [ 92.934166] PM: Creating hibernation image: [ 93.162306] PM: Need to copy 365083 pages [ 93.162308] PM: Normal pages needed: 365083 + 1024, available pages: 3808157 [ 92.934852] PM: Restoring platform NVS memory [ 92.935277] Enabling non-boot CPUs ... [ 92.935308] x86: Booting SMP configuration: [ 92.935309] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 92.947157] kvm: enabling virtualization on CPU1 [ 92.949348] Intel pstate controlling: cpu 1 [ 92.949384] CPU1 is up [ 92.950973] ACPI: Waking up from system sleep state S4 [ 92.955054] PM: noirq restore of devices complete after 3.510 msecs [ 92.955253] PM: early restore of devices complete after 0.178 msecs [ 93.038941] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 93.038981] usb usb3: root hub lost power or was reset [ 93.038982] usb usb4: root hub lost power or was reset [ 93.039111] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 93.039160] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 93.039181] usb usb1: root hub lost power or was reset [ 93.040272] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 93.040409] usb usb2: root hub lost power or was reset [ 93.043060] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 93.044318] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 93.044339] ath: phy0: ASPM enabled: 0x43 [ 93.048347] <6>[fglrx] Power up the ASIC [ 93.077924] sd 0:0:0:0: [sda] Starting disk [ 93.395291] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 93.395308] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 93.399285] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 93.407295] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 93.407319] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 93.413398] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 93.413399] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 93.413400] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 93.418286] <6>[fglrx] Preparing resume fglrx in kernel. [ 93.420179] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 93.420181] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 93.420182] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 93.420497] ata6.00: configured for UDMA/100 [ 93.455414] ata1.00: configured for UDMA/100 [ 93.535585] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 93.535587] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 93.772316] <6>[fglrx] Resuming fglrx in kernel completed. [ 93.772380] <6>[fglrx] IRQ 52 Enabled [ 93.795642] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 94.082421] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 94.082422] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 94.082425] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 94.082427] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 94.239890] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 94.467618] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 94.592124] usb 3-10: reset full-speed USB device number 8 using xhci_hcd [ 94.720280] usb 3-10: device firmware changed [ 94.720408] PM: restore of devices complete after 1680.813 msecs [ 94.720606] PM: Image restored successfully. [ 94.720646] PM: Basic memory bitmaps freed [ 94.720648] Restarting tasks ... [ 94.723119] usb 3-10: USB disconnect, device number 8 [ 94.724921] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bd8aa100 [ 94.724924] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bd8aa190 [ 94.724925] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800bd8aa148 [ 94.724926] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f03ed348 [ 94.724928] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f03ed300 [ 94.727697] done. [ 94.825458] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 94.892229] usb 3-10: new full-speed USB device number 9 using xhci_hcd [ 95.025233] usb 3-10: New USB device found, idVendor=0cf3, idProduct=e005 [ 95.025236] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 95.067037] usb 3-10: USB disconnect, device number 9 [ 95.163013] FWTS_RESUME [ 95.163028] Finished fwts resume [ 95.180575] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 95.222498] r8169 0000:04:00.0 eth0: link down [ 95.222539] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 95.344522] usb 3-10: new full-speed USB device number 10 using xhci_hcd [ 96.929772] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 96.941953] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 96.943474] wlan0: authenticated [ 96.945482] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 96.949382] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=15) [ 96.949436] wlan0: associated [ 96.949445] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 96.950295] cfg80211: Calling CRDA for country: TW [ 96.951911] ath: EEPROM regdomain: 0x809e [ 96.951914] ath: EEPROM indicates we should expect a country code [ 96.951915] ath: doing EEPROM country->regdmn map search [ 96.951916] ath: country maps to regdmn code: 0x50 [ 96.951917] ath: Country alpha2 being used: TW [ 96.951918] ath: Regpair used: 0x50 [ 96.951919] ath: regdomain 0x809e dynamically updated by country IE [ 96.951938] cfg80211: Regulatory domain changed to country: TW [ 96.951939] cfg80211: DFS Master region: unset [ 96.951940] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 96.951942] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 96.951943] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 96.951944] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 96.957666] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 96.964257] cfg80211: Calling CRDA to update world regulatory domain [ 96.964334] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 96.970662] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 96.971419] cfg80211: World regulatory domain updated: [ 96.971422] cfg80211: DFS Master region: unset [ 96.971423] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 96.971425] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 96.971426] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 96.971428] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 96.971429] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 96.971430] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 96.972313] wlan0: authenticated [ 96.973476] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 96.976341] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=15) [ 96.976387] wlan0: associated [ 96.976409] cfg80211: Calling CRDA for country: TW [ 96.978101] ath: EEPROM regdomain: 0x809e [ 96.978104] ath: EEPROM indicates we should expect a country code [ 96.978105] ath: doing EEPROM country->regdmn map search [ 96.978106] ath: country maps to regdmn code: 0x50 [ 96.978107] ath: Country alpha2 being used: TW [ 96.978108] ath: Regpair used: 0x50 [ 96.978109] ath: regdomain 0x809e dynamically updated by country IE [ 96.978128] cfg80211: Regulatory domain changed to country: TW [ 96.978129] cfg80211: DFS Master region: unset [ 96.978130] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 96.978132] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 96.978133] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 96.978134] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 98.692730] Starting fwts hibernate [ 98.692745] Hibernate [ 98.894574] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 98.901772] cfg80211: Calling CRDA to update world regulatory domain [ 98.903550] cfg80211: World regulatory domain updated: [ 98.903553] cfg80211: DFS Master region: unset [ 98.903554] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 98.903556] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 98.903558] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 98.903559] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 98.903560] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 98.903561] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 98.958720] vgaarb: this pci device is not a vga device [ 99.215089] init: anacron main process (4171) killed by TERM signal [ 99.827798] vgaarb: this pci device is not a vga device [ 99.982644] PM: Syncing filesystems ... done. [ 100.068456] Freezing user space processes ... [ 100.476780] usb 3-10: New USB device found, idVendor=0cf3, idProduct=e005 [ 100.476782] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 100.483734] (elapsed 0.415 seconds) done. [ 100.483842] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 100.483845] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 100.483847] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 100.483861] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 100.483866] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 100.483869] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 100.483871] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 100.483875] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 100.484429] PM: Basic memory bitmaps created [ 100.484477] PM: Preallocating image memory... done (allocated 379176 pages) [ 100.783734] PM: Allocated 1516704 kbytes in 0.29 seconds (5230.01 MB/s) [ 100.783736] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 100.785055] Suspending console(s) (use no_console_suspend to debug) [ 100.791850] <6>[fglrx] IRQ 52 Disabled [ 100.791901] <6>[fglrx] Preparing suspend fglrx in kernel. [ 103.664850] <6>[fglrx] Suspending fglrx in kernel completed. [ 103.664852] <6>[fglrx] Power down the ASIC . [ 103.665053] PM: freeze of devices complete after 2878.219 msecs [ 103.665362] PM: late freeze of devices complete after 0.306 msecs [ 103.666139] PM: noirq freeze of devices complete after 0.775 msecs [ 103.666367] ACPI: Preparing to enter system sleep state S4 [ 103.666574] PM: Saving platform NVS memory [ 103.667327] Disabling non-boot CPUs ... [ 103.667370] intel_pstate CPU 1 exiting [ 103.667489] Broke affinity for irq 23 [ 103.668496] kvm: disabling virtualization on CPU1 [ 103.769613] smpboot: CPU 1 is now offline [ 103.769947] PM: Creating hibernation image: [ 103.997449] PM: Need to copy 380080 pages [ 103.997452] PM: Normal pages needed: 380080 + 1024, available pages: 3793164 [ 103.770635] PM: Restoring platform NVS memory [ 103.771052] Enabling non-boot CPUs ... [ 103.771084] x86: Booting SMP configuration: [ 103.771085] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 103.782933] kvm: enabling virtualization on CPU1 [ 103.785131] Intel pstate controlling: cpu 1 [ 103.785167] CPU1 is up [ 103.786756] ACPI: Waking up from system sleep state S4 [ 103.790841] PM: noirq restore of devices complete after 3.514 msecs [ 103.791037] PM: early restore of devices complete after 0.175 msecs [ 103.876189] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 103.876229] usb usb3: root hub lost power or was reset [ 103.876230] usb usb4: root hub lost power or was reset [ 103.876349] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 103.876397] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 103.876418] usb usb1: root hub lost power or was reset [ 103.877527] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 103.877667] usb usb2: root hub lost power or was reset [ 103.880307] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 103.881566] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 103.881588] ath: phy0: ASPM enabled: 0x43 [ 103.885596] <6>[fglrx] Power up the ASIC [ 103.915180] sd 0:0:0:0: [sda] Starting disk [ 104.231077] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 104.235071] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 104.235090] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 104.247078] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 104.252906] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 104.252908] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 104.252909] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 104.254417] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 104.254418] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 104.254419] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 104.254726] ata6.00: configured for UDMA/100 [ 104.255513] <6>[fglrx] Preparing resume fglrx in kernel. [ 104.291373] ata1.00: configured for UDMA/100 [ 104.391210] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 104.609531] <6>[fglrx] Resuming fglrx in kernel completed. [ 104.609585] <6>[fglrx] IRQ 52 Enabled [ 104.678043] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 104.678044] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 104.678059] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 104.678062] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 104.835588] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 104.963881] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 104.963882] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 105.075672] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 105.303391] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 105.427932] usb 3-10: reset full-speed USB device number 10 using xhci_hcd [ 105.556058] usb 3-10: device firmware changed [ 105.619647] PM: restore of devices complete after 1742.765 msecs [ 105.619842] PM: Image restored successfully. [ 105.619892] PM: Basic memory bitmaps freed [ 105.619895] Restarting tasks ... [ 105.624942] usb 3-10: USB disconnect, device number 10 [ 105.625151] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803eeded200 [ 105.625153] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803eeded290 [ 105.625154] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803eeded248 [ 105.625156] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88039c132d08 [ 105.625157] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88039c132cc0 [ 105.632991] done. [ 105.792016] usb 3-10: new full-speed USB device number 11 using xhci_hcd [ 105.828145] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 105.872436] FWTS_RESUME [ 105.872450] Finished fwts resume [ 105.889034] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 105.921026] usb 3-10: New USB device found, idVendor=0cf3, idProduct=e005 [ 105.921029] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 105.934209] r8169 0000:04:00.0 eth0: link down [ 105.934268] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 106.820868] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 106.827226] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 106.829554] wlan0: authenticated [ 106.832848] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 106.835801] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=15) [ 106.835849] wlan0: associated [ 106.836534] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 106.836970] cfg80211: Calling CRDA for country: TW [ 106.838589] ath: EEPROM regdomain: 0x809e [ 106.838592] ath: EEPROM indicates we should expect a country code [ 106.838593] ath: doing EEPROM country->regdmn map search [ 106.838594] ath: country maps to regdmn code: 0x50 [ 106.838595] ath: Country alpha2 being used: TW [ 106.838596] ath: Regpair used: 0x50 [ 106.838597] ath: regdomain 0x809e dynamically updated by country IE [ 106.838617] cfg80211: Regulatory domain changed to country: TW [ 106.838618] cfg80211: DFS Master region: unset [ 106.838619] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 106.838621] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 106.838622] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 106.838623] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 109.901847] Starting fwts hibernate [ 109.901861] Hibernate [ 110.102185] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 110.108907] cfg80211: Calling CRDA to update world regulatory domain [ 110.111020] cfg80211: World regulatory domain updated: [ 110.111024] cfg80211: DFS Master region: unset [ 110.111026] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 110.111028] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 110.111029] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 110.111030] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 110.111031] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 110.111033] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 110.170754] vgaarb: this pci device is not a vga device [ 110.923191] Bluetooth: Can't get version to change to load ram patch err [ 110.923195] Bluetooth: Loading patch file failed [ 110.923202] ath3k: probe of 3-10:1.0 failed with error -110 [ 111.009250] init: anacron main process (4810) killed by TERM signal [ 111.548138] vgaarb: this pci device is not a vga device [ 111.702973] PM: Syncing filesystems ... done. [ 111.790850] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 111.792428] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 111.792431] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 111.792432] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 111.792446] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 111.792451] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 111.792454] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 111.792456] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 111.792461] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 111.793015] PM: Basic memory bitmaps created [ 111.793067] PM: Preallocating image memory... done (allocated 379513 pages) [ 112.091328] PM: Allocated 1518052 kbytes in 0.29 seconds (5234.66 MB/s) [ 112.091330] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done. [ 112.094716] Suspending console(s) (use no_console_suspend to debug) [ 112.097304] <6>[fglrx] IRQ 52 Disabled [ 112.097359] <6>[fglrx] Preparing suspend fglrx in kernel. [ 114.982089] <6>[fglrx] Suspending fglrx in kernel completed. [ 114.982090] <6>[fglrx] Power down the ASIC . [ 114.982265] PM: freeze of devices complete after 2885.776 msecs [ 114.982594] PM: late freeze of devices complete after 0.327 msecs [ 114.983361] PM: noirq freeze of devices complete after 0.765 msecs [ 114.983589] ACPI: Preparing to enter system sleep state S4 [ 114.983791] PM: Saving platform NVS memory [ 114.984556] Disabling non-boot CPUs ... [ 114.984598] intel_pstate CPU 1 exiting [ 114.985719] kvm: disabling virtualization on CPU1 [ 114.985735] smpboot: CPU 1 is now offline [ 114.986086] PM: Creating hibernation image: [ 115.213513] PM: Need to copy 380485 pages [ 115.213515] PM: Normal pages needed: 380485 + 1024, available pages: 3792754 [ 114.986773] PM: Restoring platform NVS memory [ 114.987202] Enabling non-boot CPUs ... [ 114.987234] x86: Booting SMP configuration: [ 114.987235] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 114.999082] kvm: enabling virtualization on CPU1 [ 115.001278] Intel pstate controlling: cpu 1 [ 115.001313] CPU1 is up [ 115.002934] ACPI: Waking up from system sleep state S4 [ 115.006866] PM: noirq restore of devices complete after 3.380 msecs [ 115.007083] PM: early restore of devices complete after 0.195 msecs [ 115.092318] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 115.092362] usb usb3: root hub lost power or was reset [ 115.092362] usb usb4: root hub lost power or was reset [ 115.092482] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 115.092530] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 115.093452] usb usb1: root hub lost power or was reset [ 115.093530] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 115.093602] usb usb2: root hub lost power or was reset [ 115.097334] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 115.097487] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 115.097504] ath: phy0: ASPM enabled: 0x43 [ 115.102411] <6>[fglrx] Power up the ASIC [ 115.131213] sd 0:0:0:0: [sda] Starting disk [ 115.451110] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 115.451126] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 115.455095] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 115.463100] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 115.472572] <6>[fglrx] Preparing resume fglrx in kernel. [ 115.473979] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 115.473980] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 115.473981] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 115.475511] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 115.475512] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 115.475513] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 115.475823] ata6.00: configured for UDMA/100 [ 115.512311] ata1.00: configured for UDMA/100 [ 115.607217] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 115.826820] <6>[fglrx] Resuming fglrx in kernel completed. [ 115.826877] <6>[fglrx] IRQ 52 Enabled [ 115.893946] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 115.893948] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 115.893951] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 115.893955] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 116.051552] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 116.279221] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 116.403826] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 116.532123] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 116.532125] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 116.643927] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 116.772580] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 116.772581] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 116.772582] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 116.772583] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 116.772583] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 116.815965] PM: restore of devices complete after 1722.959 msecs [ 116.818978] PM: Image restored successfully. [ 116.819040] PM: Basic memory bitmaps freed [ 116.819043] Restarting tasks ... done. [ 116.836028] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 117.068312] FWTS_RESUME [ 117.068326] Finished fwts resume [ 117.087448] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 117.134222] r8169 0000:04:00.0 eth0: link down [ 117.134259] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 118.030407] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 118.038119] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 118.039600] wlan0: authenticated [ 118.040656] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 118.043602] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=15) [ 118.043650] wlan0: associated [ 118.043668] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 118.043711] cfg80211: Calling CRDA for country: TW [ 118.045402] ath: EEPROM regdomain: 0x809e [ 118.045404] ath: EEPROM indicates we should expect a country code [ 118.045405] ath: doing EEPROM country->regdmn map search [ 118.045406] ath: country maps to regdmn code: 0x50 [ 118.045407] ath: Country alpha2 being used: TW [ 118.045408] ath: Regpair used: 0x50 [ 118.045409] ath: regdomain 0x809e dynamically updated by country IE [ 118.045428] cfg80211: Regulatory domain changed to country: TW [ 118.045429] cfg80211: DFS Master region: unset [ 118.045430] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 118.045432] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 118.045434] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 118.045435] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 121.596960] Starting fwts hibernate [ 121.596975] Hibernate [ 121.797396] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 121.804377] cfg80211: Calling CRDA to update world regulatory domain [ 121.806493] cfg80211: World regulatory domain updated: [ 121.806496] cfg80211: DFS Master region: unset [ 121.806497] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 121.806499] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 121.806500] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 121.806502] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 121.806503] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 121.806504] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 121.862135] vgaarb: this pci device is not a vga device [ 122.048617] init: anacron main process (5470) killed by TERM signal [ 122.654760] vgaarb: this pci device is not a vga device [ 122.809528] PM: Syncing filesystems ... done. [ 122.885369] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 122.886893] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 122.886896] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 122.886897] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 122.886912] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 122.886916] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 122.886920] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 122.886922] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 122.886926] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 122.887480] PM: Basic memory bitmaps created [ 122.887531] PM: Preallocating image memory... [ 122.916253] hpet1: lost 1 rtc interrupts [ 123.049308] hpet1: lost 6 rtc interrupts [ 123.185732] done (allocated 379322 pages) [ 123.185734] PM: Allocated 1517288 kbytes in 0.29 seconds (5232.02 MB/s) [ 123.185735] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 123.187072] Suspending console(s) (use no_console_suspend to debug) [ 123.192439] <6>[fglrx] IRQ 52 Disabled [ 123.192515] <6>[fglrx] Preparing suspend fglrx in kernel. [ 126.063950] <6>[fglrx] Suspending fglrx in kernel completed. [ 126.063951] <6>[fglrx] Power down the ASIC . [ 126.064151] PM: freeze of devices complete after 2876.751 msecs [ 126.064461] PM: late freeze of devices complete after 0.308 msecs [ 126.065229] PM: noirq freeze of devices complete after 0.766 msecs [ 126.065457] ACPI: Preparing to enter system sleep state S4 [ 126.065661] PM: Saving platform NVS memory [ 126.066401] Disabling non-boot CPUs ... [ 126.066444] intel_pstate CPU 1 exiting [ 126.066566] Broke affinity for irq 47 [ 126.067569] kvm: disabling virtualization on CPU1 [ 126.067579] smpboot: CPU 1 is now offline [ 126.067940] PM: Creating hibernation image: [ 126.295340] PM: Need to copy 380304 pages [ 126.295342] PM: Normal pages needed: 380304 + 1024, available pages: 3792939 [ 126.068625] PM: Restoring platform NVS memory [ 126.069057] Enabling non-boot CPUs ... [ 126.069087] x86: Booting SMP configuration: [ 126.069088] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 126.080935] kvm: enabling virtualization on CPU1 [ 126.083130] Intel pstate controlling: cpu 1 [ 126.083164] CPU1 is up [ 126.084797] ACPI: Waking up from system sleep state S4 [ 126.087767] PM: noirq restore of devices complete after 2.410 msecs [ 126.087982] PM: early restore of devices complete after 0.193 msecs [ 126.173009] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 126.173050] usb usb3: root hub lost power or was reset [ 126.173051] usb usb4: root hub lost power or was reset [ 126.173172] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 126.173219] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 126.173240] usb usb1: root hub lost power or was reset [ 126.174581] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 126.174644] usb usb2: root hub lost power or was reset [ 126.177124] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 126.178537] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 126.178562] ath: phy0: ASPM enabled: 0x43 [ 126.183197] <6>[fglrx] Power up the ASIC [ 126.211603] sd 0:0:0:0: [sda] Starting disk [ 126.503774] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 126.527769] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 126.527789] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 126.534635] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 126.534636] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 126.534637] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 126.535872] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 126.536220] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 126.536222] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 126.536223] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 126.536527] ata6.00: configured for UDMA/100 [ 126.553387] <6>[fglrx] Preparing resume fglrx in kernel. [ 126.585105] ata1.00: configured for UDMA/100 [ 126.687819] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 126.907766] <6>[fglrx] Resuming fglrx in kernel completed. [ 126.907843] <6>[fglrx] IRQ 52 Enabled [ 126.974635] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 126.974636] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 126.974639] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 126.974642] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 127.132013] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 127.260227] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 127.260228] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 127.371980] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 127.599490] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 127.724040] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 127.839997] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 127.852752] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 127.852754] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 127.852755] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 127.852756] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 127.852757] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 127.895940] PM: restore of devices complete after 1722.945 msecs [ 127.898913] PM: Image restored successfully. [ 127.898959] PM: Basic memory bitmaps freed [ 127.898962] Restarting tasks ... done. [ 128.159195] FWTS_RESUME [ 128.159210] Finished fwts resume [ 128.176619] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 128.218071] r8169 0000:04:00.0 eth0: link down [ 128.218109] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 129.928539] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 129.940758] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 129.942263] wlan0: authenticated [ 129.944354] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 129.946890] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 129.946938] wlan0: associated [ 129.946945] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 129.947452] cfg80211: Calling CRDA for country: TW [ 129.948979] ath: EEPROM regdomain: 0x809e [ 129.948981] ath: EEPROM indicates we should expect a country code [ 129.948982] ath: doing EEPROM country->regdmn map search [ 129.948983] ath: country maps to regdmn code: 0x50 [ 129.948984] ath: Country alpha2 being used: TW [ 129.948985] ath: Regpair used: 0x50 [ 129.948986] ath: regdomain 0x809e dynamically updated by country IE [ 129.949005] cfg80211: Regulatory domain changed to country: TW [ 129.949006] cfg80211: DFS Master region: unset [ 129.949007] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 129.949009] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 129.949010] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 129.949011] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 129.957217] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 129.963928] cfg80211: Calling CRDA to update world regulatory domain [ 129.963990] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 129.970249] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 129.970835] cfg80211: World regulatory domain updated: [ 129.970838] cfg80211: DFS Master region: unset [ 129.970839] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 129.970841] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 129.970843] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 129.970844] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 129.970845] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 129.970846] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 129.971922] wlan0: authenticated [ 129.972177] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 129.975316] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 129.975361] wlan0: associated [ 129.975435] cfg80211: Calling CRDA for country: TW [ 129.977050] ath: EEPROM regdomain: 0x809e [ 129.977052] ath: EEPROM indicates we should expect a country code [ 129.977053] ath: doing EEPROM country->regdmn map search [ 129.977054] ath: country maps to regdmn code: 0x50 [ 129.977055] ath: Country alpha2 being used: TW [ 129.977056] ath: Regpair used: 0x50 [ 129.977057] ath: regdomain 0x809e dynamically updated by country IE [ 129.977077] cfg80211: Regulatory domain changed to country: TW [ 129.977078] cfg80211: DFS Master region: unset [ 129.977079] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 129.977080] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 129.977082] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 129.977083] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 133.203409] Starting fwts hibernate [ 133.203424] Hibernate [ 133.403085] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 133.409763] cfg80211: Calling CRDA to update world regulatory domain [ 133.412056] cfg80211: World regulatory domain updated: [ 133.412059] cfg80211: DFS Master region: unset [ 133.412060] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 133.412062] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 133.412064] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 133.412065] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 133.412066] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 133.412067] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 133.456584] vgaarb: this pci device is not a vga device [ 133.671473] init: anacron main process (6018) killed by TERM signal [ 134.229245] vgaarb: this pci device is not a vga device [ 134.383984] PM: Syncing filesystems ... done. [ 134.476088] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 134.477650] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 134.477654] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 134.477655] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 134.477669] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 134.477674] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 134.477677] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 134.477679] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 134.477683] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 134.478238] PM: Basic memory bitmaps created [ 134.478289] PM: Preallocating image memory... done (allocated 380176 pages) [ 134.776372] PM: Allocated 1520704 kbytes in 0.29 seconds (5243.80 MB/s) [ 134.776374] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 134.777693] Suspending console(s) (use no_console_suspend to debug) [ 134.782860] <6>[fglrx] IRQ 52 Disabled [ 134.782914] <6>[fglrx] Preparing suspend fglrx in kernel. [ 137.658106] <6>[fglrx] Suspending fglrx in kernel completed. [ 137.658107] <6>[fglrx] Power down the ASIC . [ 137.658261] PM: freeze of devices complete after 2880.228 msecs [ 137.658572] PM: late freeze of devices complete after 0.309 msecs [ 137.659332] PM: noirq freeze of devices complete after 0.759 msecs [ 137.659560] ACPI: Preparing to enter system sleep state S4 [ 137.659765] PM: Saving platform NVS memory [ 137.660523] Disabling non-boot CPUs ... [ 137.660555] intel_pstate CPU 1 exiting [ 137.661673] kvm: disabling virtualization on CPU1 [ 137.661687] smpboot: CPU 1 is now offline [ 137.662033] PM: Creating hibernation image: [ 137.889419] PM: Need to copy 381017 pages [ 137.889422] PM: Normal pages needed: 381017 + 1024, available pages: 3792224 [ 137.662719] PM: Restoring platform NVS memory [ 137.663139] Enabling non-boot CPUs ... [ 137.663170] x86: Booting SMP configuration: [ 137.663171] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 137.675019] kvm: enabling virtualization on CPU1 [ 137.677220] Intel pstate controlling: cpu 1 [ 137.677255] CPU1 is up [ 137.678864] ACPI: Waking up from system sleep state S4 [ 137.682231] PM: noirq restore of devices complete after 2.813 msecs [ 137.682443] PM: early restore of devices complete after 0.190 msecs [ 137.767590] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 137.767807] usb usb3: root hub lost power or was reset [ 137.767808] usb usb4: root hub lost power or was reset [ 137.767932] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 137.767981] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 137.768890] usb usb1: root hub lost power or was reset [ 137.769067] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 137.769211] usb usb2: root hub lost power or was reset [ 137.772778] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 137.773115] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 137.773136] ath: phy0: ASPM enabled: 0x43 [ 137.778471] <6>[fglrx] Power up the ASIC [ 137.806169] sd 0:0:0:0: [sda] Starting disk [ 138.122232] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 138.122249] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 138.126227] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 138.134238] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 138.134256] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 138.140634] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 138.140636] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 138.140637] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 138.142209] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 138.142210] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 138.142211] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 138.142528] ata6.00: configured for UDMA/100 [ 138.148434] <6>[fglrx] Preparing resume fglrx in kernel. [ 138.176882] ata1.00: configured for UDMA/100 [ 138.362010] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 138.486303] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 138.502998] <6>[fglrx] Resuming fglrx in kernel completed. [ 138.503057] <6>[fglrx] IRQ 52 Enabled [ 138.615070] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 138.615071] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 138.615072] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 138.615073] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 138.615074] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 138.874452] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 139.160611] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 139.160612] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 139.160616] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 139.160617] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 139.318457] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 139.446612] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 139.446613] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 139.482417] PM: restore of devices complete after 1714.850 msecs [ 139.485425] PM: Image restored successfully. [ 139.485467] PM: Basic memory bitmaps freed [ 139.485469] Restarting tasks ... done. [ 139.740683] FWTS_RESUME [ 139.740697] Finished fwts resume [ 139.761221] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 139.804511] r8169 0000:04:00.0 eth0: link down [ 139.804550] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 139.842505] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 141.532015] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 141.538443] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 141.539916] wlan0: authenticated [ 141.542607] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 141.545150] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 141.545198] wlan0: associated [ 141.545205] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 141.545570] cfg80211: Calling CRDA for country: TW [ 141.547168] ath: EEPROM regdomain: 0x809e [ 141.547170] ath: EEPROM indicates we should expect a country code [ 141.547172] ath: doing EEPROM country->regdmn map search [ 141.547172] ath: country maps to regdmn code: 0x50 [ 141.547173] ath: Country alpha2 being used: TW [ 141.547174] ath: Regpair used: 0x50 [ 141.547175] ath: regdomain 0x809e dynamically updated by country IE [ 141.547195] cfg80211: Regulatory domain changed to country: TW [ 141.547195] cfg80211: DFS Master region: unset [ 141.547196] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 141.547198] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 141.547200] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 141.547201] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 145.292555] Starting fwts hibernate [ 145.292572] Hibernate [ 145.491404] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 145.498235] cfg80211: Calling CRDA to update world regulatory domain [ 145.499967] cfg80211: World regulatory domain updated: [ 145.499970] cfg80211: DFS Master region: unset [ 145.499971] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 145.499973] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 145.499974] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 145.499975] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 145.499977] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 145.499978] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 145.547113] vgaarb: this pci device is not a vga device [ 145.742088] init: anacron main process (6561) killed by TERM signal [ 146.319733] vgaarb: this pci device is not a vga device [ 146.478799] PM: Syncing filesystems ... done. [ 146.575729] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 146.577341] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 146.577344] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 146.577346] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 146.577360] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 146.577365] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 146.577368] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 146.577370] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 146.577374] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 146.577928] PM: Basic memory bitmaps created [ 146.577977] PM: Preallocating image memory... done (allocated 380102 pages) [ 146.876523] PM: Allocated 1520408 kbytes in 0.29 seconds (5242.78 MB/s) [ 146.876525] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 146.877846] Suspending console(s) (use no_console_suspend to debug) [ 146.881417] <6>[fglrx] IRQ 52 Disabled [ 146.881470] <6>[fglrx] Preparing suspend fglrx in kernel. [ 149.767217] <6>[fglrx] Suspending fglrx in kernel completed. [ 149.767218] <6>[fglrx] Power down the ASIC . [ 149.767416] PM: freeze of devices complete after 2889.240 msecs [ 149.767731] PM: late freeze of devices complete after 0.313 msecs [ 149.768570] PM: noirq freeze of devices complete after 0.836 msecs [ 149.768798] ACPI: Preparing to enter system sleep state S4 [ 149.769005] PM: Saving platform NVS memory [ 149.769767] Disabling non-boot CPUs ... [ 149.769800] intel_pstate CPU 1 exiting [ 149.770921] kvm: disabling virtualization on CPU1 [ 149.770924] smpboot: CPU 1 is now offline [ 149.771269] PM: Creating hibernation image: [ 149.998645] PM: Need to copy 380962 pages [ 149.998648] PM: Normal pages needed: 380962 + 1024, available pages: 3792281 [ 149.771954] PM: Restoring platform NVS memory [ 149.772383] Enabling non-boot CPUs ... [ 149.772415] x86: Booting SMP configuration: [ 149.772415] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 149.784264] kvm: enabling virtualization on CPU1 [ 149.786467] Intel pstate controlling: cpu 1 [ 149.786502] CPU1 is up [ 149.788100] ACPI: Waking up from system sleep state S4 [ 149.792745] PM: noirq restore of devices complete after 4.094 msecs [ 149.792964] PM: early restore of devices complete after 0.196 msecs [ 149.878179] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 149.878222] usb usb3: root hub lost power or was reset [ 149.878224] usb usb4: root hub lost power or was reset [ 149.878343] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 149.878390] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 149.878410] usb usb1: root hub lost power or was reset [ 149.880947] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 149.881030] usb usb2: root hub lost power or was reset [ 149.882307] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 149.884934] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 149.885048] ath: phy0: ASPM enabled: 0x43 [ 149.887579] <6>[fglrx] Power up the ASIC [ 149.918638] sd 0:0:0:0: [sda] Starting disk [ 150.236744] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 150.236765] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 150.236782] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 150.244729] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 150.250798] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 150.250800] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 150.250801] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 150.257580] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 150.257581] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 150.257582] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 150.257684] <6>[fglrx] Preparing resume fglrx in kernel. [ 150.257897] ata6.00: configured for UDMA/100 [ 150.286106] ata1.00: configured for UDMA/100 [ 150.396794] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 150.611690] <6>[fglrx] Resuming fglrx in kernel completed. [ 150.611745] <6>[fglrx] IRQ 52 Enabled [ 150.683631] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 150.683632] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 150.683647] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 150.683650] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 150.840929] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 151.068552] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 151.192983] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 151.321233] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 151.321235] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 151.432960] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 151.561563] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 151.561564] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 151.561565] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 151.561566] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 151.561566] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 151.576731] PM: restore of devices complete after 1698.727 msecs [ 151.576936] PM: Image restored successfully. [ 151.576981] PM: Basic memory bitmaps freed [ 151.576983] Restarting tasks ... done. [ 151.838258] FWTS_RESUME [ 151.838271] Finished fwts resume [ 151.845152] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 151.856345] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 151.899037] r8169 0000:04:00.0 eth0: link down [ 151.899078] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 153.609470] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 153.621605] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 153.623112] wlan0: authenticated [ 153.625149] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 153.628201] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 153.628247] wlan0: associated [ 153.628254] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 153.628735] cfg80211: Calling CRDA for country: TW [ 153.630451] ath: EEPROM regdomain: 0x809e [ 153.630453] ath: EEPROM indicates we should expect a country code [ 153.630455] ath: doing EEPROM country->regdmn map search [ 153.630456] ath: country maps to regdmn code: 0x50 [ 153.630457] ath: Country alpha2 being used: TW [ 153.630457] ath: Regpair used: 0x50 [ 153.630458] ath: regdomain 0x809e dynamically updated by country IE [ 153.630478] cfg80211: Regulatory domain changed to country: TW [ 153.630479] cfg80211: DFS Master region: unset [ 153.630480] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 153.630482] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 153.630483] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 153.630484] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 153.642534] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 153.649216] cfg80211: Calling CRDA to update world regulatory domain [ 153.649285] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 153.655538] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 153.655645] cfg80211: World regulatory domain updated: [ 153.655647] cfg80211: DFS Master region: unset [ 153.655648] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 153.655650] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 153.655652] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 153.655653] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 153.655654] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 153.655655] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 153.657013] wlan0: authenticated [ 153.661117] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 153.664008] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 153.664052] wlan0: associated [ 153.664177] cfg80211: Calling CRDA for country: TW [ 153.665779] ath: EEPROM regdomain: 0x809e [ 153.665781] ath: EEPROM indicates we should expect a country code [ 153.665782] ath: doing EEPROM country->regdmn map search [ 153.665783] ath: country maps to regdmn code: 0x50 [ 153.665784] ath: Country alpha2 being used: TW [ 153.665785] ath: Regpair used: 0x50 [ 153.665786] ath: regdomain 0x809e dynamically updated by country IE [ 153.665803] cfg80211: Regulatory domain changed to country: TW [ 153.665804] cfg80211: DFS Master region: unset [ 153.665806] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 153.665807] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 153.665809] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 153.665810] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 157.867907] Starting fwts hibernate [ 157.867922] Hibernate [ 158.068283] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 158.074916] cfg80211: Calling CRDA to update world regulatory domain [ 158.076886] cfg80211: World regulatory domain updated: [ 158.076889] cfg80211: DFS Master region: unset [ 158.076890] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 158.076892] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.076893] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.076894] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.076895] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.076897] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 158.133680] vgaarb: this pci device is not a vga device [ 158.324983] init: anacron main process (7107) killed by TERM signal [ 158.910300] vgaarb: this pci device is not a vga device [ 159.081078] PM: Syncing filesystems ... done. [ 159.157248] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 159.158821] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 159.158825] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 159.158826] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 159.158840] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 159.158845] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 159.158848] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 159.158850] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 159.158855] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 159.159409] PM: Basic memory bitmaps created [ 159.159459] PM: Preallocating image memory... done (allocated 380576 pages) [ 159.457493] PM: Allocated 1522304 kbytes in 0.29 seconds (5249.32 MB/s) [ 159.457495] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 159.458815] Suspending console(s) (use no_console_suspend to debug) [ 159.463991] <6>[fglrx] IRQ 52 Disabled [ 159.464047] <6>[fglrx] Preparing suspend fglrx in kernel. [ 162.339410] <6>[fglrx] Suspending fglrx in kernel completed. [ 162.339411] <6>[fglrx] Power down the ASIC . [ 162.339547] PM: freeze of devices complete after 2880.403 msecs [ 162.339877] PM: late freeze of devices complete after 0.328 msecs [ 162.340647] PM: noirq freeze of devices complete after 0.768 msecs [ 162.340875] ACPI: Preparing to enter system sleep state S4 [ 162.341079] PM: Saving platform NVS memory [ 162.341802] Disabling non-boot CPUs ... [ 162.341833] intel_pstate CPU 1 exiting [ 162.342953] kvm: disabling virtualization on CPU1 [ 162.342968] smpboot: CPU 1 is now offline [ 162.343325] PM: Creating hibernation image: [ 162.570657] PM: Need to copy 381467 pages [ 162.570660] PM: Normal pages needed: 381467 + 1024, available pages: 3791760 [ 162.344010] PM: Restoring platform NVS memory [ 162.344431] Enabling non-boot CPUs ... [ 162.344462] x86: Booting SMP configuration: [ 162.344463] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 162.356311] kvm: enabling virtualization on CPU1 [ 162.358510] Intel pstate controlling: cpu 1 [ 162.358545] CPU1 is up [ 162.360163] ACPI: Waking up from system sleep state S4 [ 162.363296] PM: noirq restore of devices complete after 2.582 msecs [ 162.363527] PM: early restore of devices complete after 0.209 msecs [ 162.448627] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 162.448846] usb usb3: root hub lost power or was reset [ 162.448847] usb usb4: root hub lost power or was reset [ 162.448969] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 162.449018] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 162.449039] usb usb1: root hub lost power or was reset [ 162.450128] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 162.450267] usb usb2: root hub lost power or was reset [ 162.452920] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 162.454180] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 162.454202] ath: phy0: ASPM enabled: 0x43 [ 162.458209] <6>[fglrx] Power up the ASIC [ 162.487809] sd 0:0:0:0: [sda] Starting disk [ 162.803320] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 162.803337] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 162.807311] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 162.815321] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 162.815339] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 162.827563] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 162.827565] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 162.827566] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 162.828140] <6>[fglrx] Preparing resume fglrx in kernel. [ 162.829163] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 162.829164] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 162.829166] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 162.829469] ata6.00: configured for UDMA/100 [ 162.864668] ata1.00: configured for UDMA/100 [ 163.042975] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 163.167413] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 163.182188] <6>[fglrx] Resuming fglrx in kernel completed. [ 163.182247] <6>[fglrx] IRQ 52 Enabled [ 163.295695] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 163.295696] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 163.555561] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 163.841518] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 163.841519] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 163.841524] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 163.841535] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 163.847497] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 163.999514] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 164.128203] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 164.128204] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 164.128205] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 164.128206] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 164.128206] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 164.183195] PM: restore of devices complete after 1734.581 msecs [ 164.183391] PM: Image restored successfully. [ 164.183427] PM: Basic memory bitmaps freed [ 164.183436] Restarting tasks ... done. [ 164.441097] FWTS_RESUME [ 164.441112] Finished fwts resume [ 164.458392] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 164.501598] r8169 0000:04:00.0 eth0: link down [ 164.501637] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 166.212093] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 166.224772] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 166.226244] wlan0: authenticated [ 166.227685] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 166.234161] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 166.234210] wlan0: associated [ 166.234227] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 166.234271] cfg80211: Calling CRDA for country: TW [ 166.235892] ath: EEPROM regdomain: 0x809e [ 166.235894] ath: EEPROM indicates we should expect a country code [ 166.235895] ath: doing EEPROM country->regdmn map search [ 166.235896] ath: country maps to regdmn code: 0x50 [ 166.235897] ath: Country alpha2 being used: TW [ 166.235898] ath: Regpair used: 0x50 [ 166.235899] ath: regdomain 0x809e dynamically updated by country IE [ 166.235918] cfg80211: Regulatory domain changed to country: TW [ 166.235919] cfg80211: DFS Master region: unset [ 166.235920] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 166.235922] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 166.235924] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 166.235925] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 166.243213] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 166.249815] cfg80211: Calling CRDA to update world regulatory domain [ 166.250359] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 166.256663] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 166.256781] cfg80211: World regulatory domain updated: [ 166.256783] cfg80211: DFS Master region: unset [ 166.256784] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 166.256786] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 166.256788] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 166.256789] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 166.256790] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 166.256791] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 166.258135] wlan0: authenticated [ 166.259716] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 166.262606] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 166.262652] wlan0: associated [ 166.262673] cfg80211: Calling CRDA for country: TW [ 166.264493] ath: EEPROM regdomain: 0x809e [ 166.264495] ath: EEPROM indicates we should expect a country code [ 166.264496] ath: doing EEPROM country->regdmn map search [ 166.264497] ath: country maps to regdmn code: 0x50 [ 166.264498] ath: Country alpha2 being used: TW [ 166.264499] ath: Regpair used: 0x50 [ 166.264500] ath: regdomain 0x809e dynamically updated by country IE [ 166.264519] cfg80211: Regulatory domain changed to country: TW [ 166.264520] cfg80211: DFS Master region: unset [ 166.264521] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 166.264523] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 166.264525] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 166.264526] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 170.970495] Starting fwts hibernate [ 170.970508] Hibernate [ 171.171479] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 171.178127] cfg80211: Calling CRDA to update world regulatory domain [ 171.179980] cfg80211: World regulatory domain updated: [ 171.179983] cfg80211: DFS Master region: unset [ 171.179985] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 171.179987] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 171.179988] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 171.179989] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 171.179990] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 171.179991] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 171.240300] vgaarb: this pci device is not a vga device [ 171.423107] init: anacron main process (7664) killed by TERM signal [ 172.016927] vgaarb: this pci device is not a vga device [ 172.175771] PM: Syncing filesystems ... done. [ 172.243652] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 172.245264] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 172.245267] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 172.245268] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 172.245282] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 172.245287] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 172.245290] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 172.245292] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 172.245297] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 172.245850] PM: Basic memory bitmaps created [ 172.245901] PM: Preallocating image memory... done (allocated 380364 pages) [ 172.544075] PM: Allocated 1521456 kbytes in 0.29 seconds (5246.40 MB/s) [ 172.544077] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 172.545393] Suspending console(s) (use no_console_suspend to debug) [ 172.550580] <6>[fglrx] IRQ 52 Disabled [ 172.550647] <6>[fglrx] Preparing suspend fglrx in kernel. [ 175.425865] <6>[fglrx] Suspending fglrx in kernel completed. [ 175.425866] <6>[fglrx] Power down the ASIC . [ 175.426070] PM: freeze of devices complete after 2880.336 msecs [ 175.426383] PM: late freeze of devices complete after 0.311 msecs [ 175.427153] PM: noirq freeze of devices complete after 0.769 msecs [ 175.427381] ACPI: Preparing to enter system sleep state S4 [ 175.427586] PM: Saving platform NVS memory [ 175.428312] Disabling non-boot CPUs ... [ 175.428343] intel_pstate CPU 1 exiting [ 175.428462] Broke affinity for irq 16 [ 175.428470] Broke affinity for irq 23 [ 175.428474] Broke affinity for irq 47 [ 175.429477] kvm: disabling virtualization on CPU1 [ 175.429505] smpboot: CPU 1 is now offline [ 175.429840] PM: Creating hibernation image: [ 175.657285] PM: Need to copy 381419 pages [ 175.657287] PM: Normal pages needed: 381419 + 1024, available pages: 3791821 [ 175.430525] PM: Restoring platform NVS memory [ 175.430952] Enabling non-boot CPUs ... [ 175.430982] x86: Booting SMP configuration: [ 175.430983] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 175.442830] kvm: enabling virtualization on CPU1 [ 175.445018] Intel pstate controlling: cpu 1 [ 175.445054] CPU1 is up [ 175.446673] ACPI: Waking up from system sleep state S4 [ 175.449934] PM: noirq restore of devices complete after 2.706 msecs [ 175.450153] PM: early restore of devices complete after 0.197 msecs [ 175.535527] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 175.535748] usb usb3: root hub lost power or was reset [ 175.535749] usb usb4: root hub lost power or was reset [ 175.535870] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 175.535919] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 175.535941] usb usb1: root hub lost power or was reset [ 175.537024] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 175.537163] usb usb2: root hub lost power or was reset [ 175.539827] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 175.541056] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 175.541078] ath: phy0: ASPM enabled: 0x43 [ 175.545506] <6>[fglrx] Power up the ASIC [ 175.574120] sd 0:0:0:0: [sda] Starting disk [ 175.861944] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 175.893937] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 175.893957] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 175.901924] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 175.907966] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 175.907967] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 175.907968] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 175.914747] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 175.914748] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 175.914749] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 175.915064] ata6.00: configured for UDMA/100 [ 175.915739] <6>[fglrx] Preparing resume fglrx in kernel. [ 175.948532] ata1.00: configured for UDMA/100 [ 176.049984] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 176.270153] <6>[fglrx] Resuming fglrx in kernel completed. [ 176.270209] <6>[fglrx] IRQ 52 Enabled [ 176.336742] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 176.336743] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 176.336746] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 176.336749] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 176.494122] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 176.721722] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 176.846150] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 176.974429] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 176.974430] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 177.086236] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 177.214820] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 177.214821] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 177.214822] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 177.214823] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 177.214824] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 177.222121] PM: restore of devices complete after 1686.621 msecs [ 177.225131] PM: Image restored successfully. [ 177.225175] PM: Basic memory bitmaps freed [ 177.225177] Restarting tasks ... done. [ 177.484271] FWTS_RESUME [ 177.484284] Finished fwts resume [ 177.503987] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 177.548212] r8169 0000:04:00.0 eth0: link down [ 177.548249] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 177.850264] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 178.420643] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 178.426944] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 178.428542] wlan0: authenticated [ 178.430253] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 178.432805] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 178.432853] wlan0: associated [ 178.433462] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 178.433509] cfg80211: Calling CRDA for country: TW [ 178.435146] ath: EEPROM regdomain: 0x809e [ 178.435148] ath: EEPROM indicates we should expect a country code [ 178.435150] ath: doing EEPROM country->regdmn map search [ 178.435150] ath: country maps to regdmn code: 0x50 [ 178.435151] ath: Country alpha2 being used: TW [ 178.435152] ath: Regpair used: 0x50 [ 178.435154] ath: regdomain 0x809e dynamically updated by country IE [ 178.435174] cfg80211: Regulatory domain changed to country: TW [ 178.435174] cfg80211: DFS Master region: unset [ 178.435175] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 178.435177] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 178.435179] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 178.435180] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 184.513164] Starting fwts hibernate [ 184.513177] Hibernate [ 184.730822] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 184.737663] cfg80211: Calling CRDA to update world regulatory domain [ 184.739333] cfg80211: World regulatory domain updated: [ 184.739336] cfg80211: DFS Master region: unset [ 184.739337] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 184.739339] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 184.739341] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 184.739342] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 184.739343] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 184.739344] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 184.794983] vgaarb: this pci device is not a vga device [ 185.013969] init: anacron main process (8212) killed by TERM signal [ 185.571607] vgaarb: this pci device is not a vga device [ 185.746452] PM: Syncing filesystems ... done. [ 185.833382] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 185.834962] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 185.834965] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 185.834966] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 185.834980] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 185.834985] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 185.834988] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 185.834990] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 185.834995] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 185.835561] PM: Basic memory bitmaps created [ 185.835616] PM: Preallocating image memory... done (allocated 380545 pages) [ 186.133741] PM: Allocated 1522180 kbytes in 0.29 seconds (5248.89 MB/s) [ 186.133742] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 186.135065] Suspending console(s) (use no_console_suspend to debug) [ 186.141306] <6>[fglrx] IRQ 52 Disabled [ 186.141360] <6>[fglrx] Preparing suspend fglrx in kernel. [ 189.016534] <6>[fglrx] Suspending fglrx in kernel completed. [ 189.016535] <6>[fglrx] Power down the ASIC . [ 189.016737] PM: freeze of devices complete after 2881.345 msecs [ 189.017049] PM: late freeze of devices complete after 0.309 msecs [ 189.017812] PM: noirq freeze of devices complete after 0.762 msecs [ 189.018041] ACPI: Preparing to enter system sleep state S4 [ 189.018244] PM: Saving platform NVS memory [ 189.019003] Disabling non-boot CPUs ... [ 189.019035] intel_pstate CPU 1 exiting [ 189.020156] kvm: disabling virtualization on CPU1 [ 189.020181] smpboot: CPU 1 is now offline [ 189.020536] PM: Creating hibernation image: [ 189.247957] PM: Need to copy 381546 pages [ 189.247960] PM: Normal pages needed: 381546 + 1024, available pages: 3791685 [ 189.021219] PM: Restoring platform NVS memory [ 189.021646] Enabling non-boot CPUs ... [ 189.021677] x86: Booting SMP configuration: [ 189.021678] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 189.033525] kvm: enabling virtualization on CPU1 [ 189.035714] Intel pstate controlling: cpu 1 [ 189.035748] CPU1 is up [ 189.037363] ACPI: Waking up from system sleep state S4 [ 189.040618] PM: noirq restore of devices complete after 2.710 msecs [ 189.040823] PM: early restore of devices complete after 0.183 msecs [ 189.126263] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 189.126302] usb usb3: root hub lost power or was reset [ 189.126303] usb usb4: root hub lost power or was reset [ 189.126426] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 189.126473] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 189.126495] usb usb1: root hub lost power or was reset [ 189.128892] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 189.128964] usb usb2: root hub lost power or was reset [ 189.130400] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 189.132848] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 189.132871] ath: phy0: ASPM enabled: 0x43 [ 189.135713] <6>[fglrx] Power up the ASIC [ 189.166421] sd 0:0:0:0: [sda] Starting disk [ 189.456623] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 189.484619] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 189.484639] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 189.492615] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 189.496662] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 189.503449] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 189.503450] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 189.503451] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 189.504959] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 189.504961] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 189.504962] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 189.505269] ata6.00: configured for UDMA/100 [ 189.505860] <6>[fglrx] Preparing resume fglrx in kernel. [ 189.534807] ata1.00: configured for UDMA/100 [ 189.724283] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 189.848693] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 189.859949] <6>[fglrx] Resuming fglrx in kernel completed. [ 189.860007] <6>[fglrx] IRQ 52 Enabled [ 189.977025] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 189.977027] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 190.088863] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 190.217505] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 190.217506] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 190.217507] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 190.217508] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 190.217508] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 190.476866] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 190.763130] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 190.763131] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 190.763135] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 190.763136] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 190.792642] PM: restore of devices complete after 1666.553 msecs [ 190.792842] PM: Image restored successfully. [ 190.792886] PM: Basic memory bitmaps freed [ 190.792888] Restarting tasks ... done. [ 190.853879] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 191.037572] FWTS_RESUME [ 191.037587] Finished fwts resume [ 191.056085] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 191.098895] r8169 0000:04:00.0 eth0: link down [ 191.098937] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 192.797313] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 192.809553] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 192.811068] wlan0: authenticated [ 192.813006] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 192.815589] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 192.815634] wlan0: associated [ 192.815640] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 192.815803] cfg80211: Calling CRDA for country: TW [ 192.817564] ath: EEPROM regdomain: 0x809e [ 192.817566] ath: EEPROM indicates we should expect a country code [ 192.817567] ath: doing EEPROM country->regdmn map search [ 192.817568] ath: country maps to regdmn code: 0x50 [ 192.817569] ath: Country alpha2 being used: TW [ 192.817570] ath: Regpair used: 0x50 [ 192.817571] ath: regdomain 0x809e dynamically updated by country IE [ 192.817590] cfg80211: Regulatory domain changed to country: TW [ 192.817591] cfg80211: DFS Master region: unset [ 192.817592] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 192.817594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 192.817595] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 192.817597] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 192.825862] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 192.832413] cfg80211: Calling CRDA to update world regulatory domain [ 192.832477] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 192.838730] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 192.838841] cfg80211: World regulatory domain updated: [ 192.838843] cfg80211: DFS Master region: unset [ 192.838844] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 192.838846] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 192.838848] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 192.838849] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 192.838850] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 192.838851] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 192.840242] wlan0: authenticated [ 192.841015] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 192.845364] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 192.845410] wlan0: associated [ 192.845428] cfg80211: Calling CRDA for country: TW [ 192.847090] ath: EEPROM regdomain: 0x809e [ 192.847093] ath: EEPROM indicates we should expect a country code [ 192.847094] ath: doing EEPROM country->regdmn map search [ 192.847095] ath: country maps to regdmn code: 0x50 [ 192.847096] ath: Country alpha2 being used: TW [ 192.847096] ath: Regpair used: 0x50 [ 192.847098] ath: regdomain 0x809e dynamically updated by country IE [ 192.847117] cfg80211: Regulatory domain changed to country: TW [ 192.847118] cfg80211: DFS Master region: unset [ 192.847119] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 192.847121] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 192.847122] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 192.847123] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 198.585891] Starting fwts hibernate [ 198.585906] Hibernate [ 198.786083] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 198.792771] cfg80211: Calling CRDA to update world regulatory domain [ 198.794582] cfg80211: World regulatory domain updated: [ 198.794585] cfg80211: DFS Master region: unset [ 198.794587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 198.794589] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 198.794590] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 198.794591] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 198.794592] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 198.794593] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 198.853736] vgaarb: this pci device is not a vga device [ 199.032846] init: anacron main process (8752) killed by TERM signal [ 199.614336] vgaarb: this pci device is not a vga device [ 199.773111] PM: Syncing filesystems ... done. [ 199.861491] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 199.863118] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 199.863121] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 199.863122] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 199.863137] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 199.863141] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 199.863144] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 199.863146] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 199.863151] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 199.863705] PM: Basic memory bitmaps created [ 199.863756] PM: Preallocating image memory... done (allocated 380579 pages) [ 200.162057] PM: Allocated 1522316 kbytes in 0.29 seconds (5249.36 MB/s) [ 200.162059] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 200.163380] Suspending console(s) (use no_console_suspend to debug) [ 200.168016] <6>[fglrx] IRQ 52 Disabled [ 200.168073] <6>[fglrx] Preparing suspend fglrx in kernel. [ 203.043452] <6>[fglrx] Suspending fglrx in kernel completed. [ 203.043453] <6>[fglrx] Power down the ASIC . [ 203.043611] PM: freeze of devices complete after 2879.891 msecs [ 203.043922] PM: late freeze of devices complete after 0.310 msecs [ 203.044699] PM: noirq freeze of devices complete after 0.775 msecs [ 203.044927] ACPI: Preparing to enter system sleep state S4 [ 203.045132] PM: Saving platform NVS memory [ 203.045906] Disabling non-boot CPUs ... [ 203.045938] intel_pstate CPU 1 exiting [ 203.046060] Broke affinity for irq 16 [ 203.046068] Broke affinity for irq 23 [ 203.046072] Broke affinity for irq 47 [ 203.047075] kvm: disabling virtualization on CPU1 [ 203.047091] smpboot: CPU 1 is now offline [ 203.047447] PM: Creating hibernation image: [ 203.274789] PM: Need to copy 381575 pages [ 203.274791] PM: Normal pages needed: 381575 + 1024, available pages: 3791653 [ 203.048132] PM: Restoring platform NVS memory [ 203.048560] Enabling non-boot CPUs ... [ 203.048591] x86: Booting SMP configuration: [ 203.048591] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 203.060439] kvm: enabling virtualization on CPU1 [ 203.062632] Intel pstate controlling: cpu 1 [ 203.062666] CPU1 is up [ 203.064281] ACPI: Waking up from system sleep state S4 [ 203.067335] PM: noirq restore of devices complete after 2.506 msecs [ 203.067552] PM: early restore of devices complete after 0.194 msecs [ 203.152742] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 203.152962] usb usb3: root hub lost power or was reset [ 203.152964] usb usb4: root hub lost power or was reset [ 203.153088] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 203.153135] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 203.153156] usb usb1: root hub lost power or was reset [ 203.154239] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 203.154374] usb usb2: root hub lost power or was reset [ 203.157047] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 203.158277] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 203.158298] ath: phy0: ASPM enabled: 0x43 [ 203.162933] <6>[fglrx] Power up the ASIC [ 203.191258] sd 0:0:0:0: [sda] Starting disk [ 203.483358] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 203.507348] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 203.511357] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 203.515352] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 203.528054] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 203.528055] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 203.528057] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 203.529596] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 203.529598] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 203.529599] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 203.529906] ata6.00: configured for UDMA/100 [ 203.533147] <6>[fglrx] Preparing resume fglrx in kernel. [ 203.534896] ata1.00: configured for UDMA/100 [ 203.667399] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 203.887683] <6>[fglrx] Resuming fglrx in kernel completed. [ 203.887746] <6>[fglrx] IRQ 52 Enabled [ 203.954227] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 203.954228] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 203.954232] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 203.954237] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 204.111538] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 204.339149] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 204.463633] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 204.591916] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 204.591917] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 204.703628] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 204.832227] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 204.832228] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 204.832229] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 204.832230] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 204.832231] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 204.839325] PM: restore of devices complete after 1686.602 msecs [ 204.839531] PM: Image restored successfully. [ 204.839577] PM: Basic memory bitmaps freed [ 204.839579] Restarting tasks ... done. [ 204.871600] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 205.112228] FWTS_RESUME [ 205.112243] Finished fwts resume [ 205.129879] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 205.173635] r8169 0000:04:00.0 eth0: link down [ 205.173677] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 206.064801] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 206.071224] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 206.072939] wlan0: authenticated [ 206.075625] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 206.078267] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 206.078316] wlan0: associated [ 206.078953] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 206.078998] cfg80211: Calling CRDA for country: TW [ 206.080671] ath: EEPROM regdomain: 0x809e [ 206.080674] ath: EEPROM indicates we should expect a country code [ 206.080675] ath: doing EEPROM country->regdmn map search [ 206.080676] ath: country maps to regdmn code: 0x50 [ 206.080677] ath: Country alpha2 being used: TW [ 206.080677] ath: Regpair used: 0x50 [ 206.080678] ath: regdomain 0x809e dynamically updated by country IE [ 206.080698] cfg80211: Regulatory domain changed to country: TW [ 206.080699] cfg80211: DFS Master region: unset [ 206.080700] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 206.080702] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 206.080703] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 206.080704] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 213.141756] Starting fwts hibernate [ 213.141772] Hibernate [ 213.341529] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 213.348232] cfg80211: Calling CRDA to update world regulatory domain [ 213.350324] cfg80211: World regulatory domain updated: [ 213.350327] cfg80211: DFS Master region: unset [ 213.350329] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 213.350331] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 213.350332] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 213.350333] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 213.350334] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 213.350335] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 213.408513] vgaarb: this pci device is not a vga device [ 213.605837] init: anacron main process (9299) killed by TERM signal [ 214.185137] vgaarb: this pci device is not a vga device [ 214.343902] PM: Syncing filesystems ... done. [ 214.422667] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 214.424228] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 214.424231] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 214.424232] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 214.424247] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 214.424251] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 214.424254] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 214.424256] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 214.424261] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 214.424827] PM: Basic memory bitmaps created [ 214.424877] PM: Preallocating image memory... [ 214.453591] hpet1: lost 1 rtc interrupts [ 214.586577] hpet1: lost 6 rtc interrupts [ 214.723431] done (allocated 380700 pages) [ 214.723434] PM: Allocated 1522800 kbytes in 0.29 seconds (5251.03 MB/s) [ 214.723435] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 214.724757] Suspending console(s) (use no_console_suspend to debug) [ 214.730846] <6>[fglrx] IRQ 52 Disabled [ 214.730926] <6>[fglrx] Preparing suspend fglrx in kernel. [ 217.619028] <6>[fglrx] Suspending fglrx in kernel completed. [ 217.619029] <6>[fglrx] Power down the ASIC . [ 217.619128] PM: freeze of devices complete after 2894.041 msecs [ 217.619457] PM: late freeze of devices complete after 0.326 msecs [ 217.620228] PM: noirq freeze of devices complete after 0.769 msecs [ 217.620456] ACPI: Preparing to enter system sleep state S4 [ 217.620658] PM: Saving platform NVS memory [ 217.621396] Disabling non-boot CPUs ... [ 217.621442] intel_pstate CPU 1 exiting [ 217.622564] kvm: disabling virtualization on CPU1 [ 217.724966] smpboot: CPU 1 is now offline [ 217.725316] PM: Creating hibernation image: [ 217.952628] PM: Need to copy 381589 pages [ 217.952631] PM: Normal pages needed: 381589 + 1024, available pages: 3791649 [ 217.726001] PM: Restoring platform NVS memory [ 217.726427] Enabling non-boot CPUs ... [ 217.726458] x86: Booting SMP configuration: [ 217.726458] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 217.738305] kvm: enabling virtualization on CPU1 [ 217.740497] Intel pstate controlling: cpu 1 [ 217.740532] CPU1 is up [ 217.742155] ACPI: Waking up from system sleep state S4 [ 217.750152] PM: noirq restore of devices complete after 7.443 msecs [ 217.750356] PM: early restore of devices complete after 0.183 msecs [ 217.835713] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 217.835755] usb usb3: root hub lost power or was reset [ 217.835757] usb usb4: root hub lost power or was reset [ 217.835879] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 217.835927] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 217.835948] usb usb1: root hub lost power or was reset [ 217.838116] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 217.838418] usb usb2: root hub lost power or was reset [ 217.839850] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 217.842331] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 217.842415] ath: phy0: ASPM enabled: 0x43 [ 217.845744] <6>[fglrx] Power up the ASIC [ 217.875566] sd 0:0:0:0: [sda] Starting disk [ 218.162160] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 218.194161] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 218.198157] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 218.206165] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 218.206191] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 218.214611] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 218.214612] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 218.214614] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 218.215684] <6>[fglrx] Preparing resume fglrx in kernel. [ 218.216155] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 218.216157] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 218.216158] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 218.216465] ata6.00: configured for UDMA/100 [ 218.251842] ata1.00: configured for UDMA/100 [ 218.338465] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 218.338466] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 218.450202] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 218.569778] <6>[fglrx] Resuming fglrx in kernel completed. [ 218.569845] <6>[fglrx] IRQ 52 Enabled [ 218.677937] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 218.802401] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 218.930958] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 218.930959] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 218.930960] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 218.930961] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 218.930961] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 219.190445] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 219.476561] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 219.476562] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 219.476566] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 219.476567] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 219.526326] PM: restore of devices complete after 1690.796 msecs [ 219.529311] PM: Image restored successfully. [ 219.529354] PM: Basic memory bitmaps freed [ 219.529356] Restarting tasks ... done. [ 219.791598] FWTS_RESUME [ 219.791612] Finished fwts resume [ 219.814553] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 219.857062] r8169 0000:04:00.0 eth0: link down [ 219.857104] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 219.858466] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 221.566872] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 221.579026] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 221.584609] wlan0: authenticated [ 221.586545] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 221.590434] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 221.590479] wlan0: associated [ 221.590486] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 221.590847] cfg80211: Calling CRDA for country: TW [ 221.592389] ath: EEPROM regdomain: 0x809e [ 221.592392] ath: EEPROM indicates we should expect a country code [ 221.592393] ath: doing EEPROM country->regdmn map search [ 221.592394] ath: country maps to regdmn code: 0x50 [ 221.592395] ath: Country alpha2 being used: TW [ 221.592395] ath: Regpair used: 0x50 [ 221.592397] ath: regdomain 0x809e dynamically updated by country IE [ 221.592416] cfg80211: Regulatory domain changed to country: TW [ 221.592417] cfg80211: DFS Master region: unset [ 221.592418] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 221.592420] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 221.592421] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 221.592427] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 221.603641] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 221.610680] cfg80211: Calling CRDA to update world regulatory domain [ 221.610784] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 221.617036] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 221.617486] cfg80211: World regulatory domain updated: [ 221.617490] cfg80211: DFS Master region: unset [ 221.617491] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 221.617492] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 221.617494] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 221.617495] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 221.617496] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 221.617497] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 221.618576] wlan0: authenticated [ 221.622588] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 221.625469] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 221.625515] wlan0: associated [ 221.625537] cfg80211: Calling CRDA for country: TW [ 221.627111] ath: EEPROM regdomain: 0x809e [ 221.627113] ath: EEPROM indicates we should expect a country code [ 221.627114] ath: doing EEPROM country->regdmn map search [ 221.627115] ath: country maps to regdmn code: 0x50 [ 221.627116] ath: Country alpha2 being used: TW [ 221.627117] ath: Regpair used: 0x50 [ 221.627118] ath: regdomain 0x809e dynamically updated by country IE [ 221.627137] cfg80211: Regulatory domain changed to country: TW [ 221.627138] cfg80211: DFS Master region: unset [ 221.627139] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 221.627141] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 221.627142] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 221.627143] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 228.324641] Starting fwts hibernate [ 228.324656] Hibernate [ 228.523433] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 228.530096] cfg80211: Calling CRDA to update world regulatory domain [ 228.532310] cfg80211: World regulatory domain updated: [ 228.532312] cfg80211: DFS Master region: unset [ 228.532313] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 228.532315] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 228.532317] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 228.532318] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 228.532319] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 228.532320] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 228.579373] vgaarb: this pci device is not a vga device [ 228.774346] init: anacron main process (9841) killed by TERM signal [ 229.367997] vgaarb: this pci device is not a vga device [ 229.522859] PM: Syncing filesystems ... done. [ 229.625090] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 229.626617] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 229.626620] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 229.626621] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 229.626635] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 229.626640] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 229.626643] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 229.626645] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 229.626649] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 229.627203] PM: Basic memory bitmaps created [ 229.627254] PM: Preallocating image memory... done (allocated 380838 pages) [ 229.925582] PM: Allocated 1523352 kbytes in 0.29 seconds (5252.93 MB/s) [ 229.925584] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 229.926900] Suspending console(s) (use no_console_suspend to debug) [ 229.929501] <6>[fglrx] IRQ 52 Disabled [ 229.929575] <6>[fglrx] Preparing suspend fglrx in kernel. [ 232.801072] <6>[fglrx] Suspending fglrx in kernel completed. [ 232.801073] <6>[fglrx] Power down the ASIC . [ 232.801227] PM: freeze of devices complete after 2873.988 msecs [ 232.801536] PM: late freeze of devices complete after 0.306 msecs [ 232.802303] PM: noirq freeze of devices complete after 0.766 msecs [ 232.802531] ACPI: Preparing to enter system sleep state S4 [ 232.802732] PM: Saving platform NVS memory [ 232.803465] Disabling non-boot CPUs ... [ 232.803506] intel_pstate CPU 1 exiting [ 232.803629] Broke affinity for irq 47 [ 232.804632] kvm: disabling virtualization on CPU1 [ 232.804652] smpboot: CPU 1 is now offline [ 232.805029] PM: Creating hibernation image: [ 233.032339] PM: Need to copy 381764 pages [ 233.032342] PM: Normal pages needed: 381764 + 1024, available pages: 3791471 [ 232.805714] PM: Restoring platform NVS memory [ 232.806140] Enabling non-boot CPUs ... [ 232.806172] x86: Booting SMP configuration: [ 232.806173] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 232.818021] kvm: enabling virtualization on CPU1 [ 232.820212] Intel pstate controlling: cpu 1 [ 232.820247] CPU1 is up [ 232.821862] ACPI: Waking up from system sleep state S4 [ 232.824984] PM: noirq restore of devices complete after 2.573 msecs [ 232.825213] PM: early restore of devices complete after 0.186 msecs [ 232.911836] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X [ 232.911865] usb usb1: root hub lost power or was reset [ 232.911872] snd_hda_intel 0000:00:03.0: irq 50 for MSI/MSI-X [ 232.912039] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 232.912102] usb usb2: root hub lost power or was reset [ 232.915769] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 232.915983] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 232.915999] ath: phy0: ASPM enabled: 0x43 [ 232.920418] usb usb3: root hub lost power or was reset [ 232.920419] usb usb4: root hub lost power or was reset [ 232.920542] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 232.921451] <6>[fglrx] Power up the ASIC [ 232.957361] sd 0:0:0:0: [sda] Starting disk [ 233.237010] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 233.265009] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 233.277007] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 233.285008] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 233.291453] <6>[fglrx] Preparing resume fglrx in kernel. [ 233.293774] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 233.293776] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 233.293777] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 233.295380] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 233.295381] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 233.295382] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 233.295688] ata6.00: configured for UDMA/100 [ 233.325070] ata1.00: configured for UDMA/100 [ 233.425056] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 233.645605] <6>[fglrx] Resuming fglrx in kernel completed. [ 233.645664] <6>[fglrx] IRQ 52 Enabled [ 233.711973] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 233.711974] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 233.711978] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 233.711981] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 233.869177] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 234.096916] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 234.221288] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 234.349488] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 234.349489] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 234.461276] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 234.589960] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 234.589961] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 234.589962] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 234.589963] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 234.589964] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 234.590743] PM: restore of devices complete after 1680.356 msecs [ 234.590940] PM: Image restored successfully. [ 234.590987] PM: Basic memory bitmaps freed [ 234.590989] Restarting tasks ... done. [ 234.841571] FWTS_RESUME [ 234.841585] Finished fwts resume [ 234.860694] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 234.894281] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 234.903290] r8169 0000:04:00.0 eth0: link down [ 234.903331] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 236.589769] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 236.602384] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 236.603889] wlan0: authenticated [ 236.605374] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 236.607996] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 236.608044] wlan0: associated [ 236.608061] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 236.608103] cfg80211: Calling CRDA for country: TW [ 236.609845] ath: EEPROM regdomain: 0x809e [ 236.609847] ath: EEPROM indicates we should expect a country code [ 236.609849] ath: doing EEPROM country->regdmn map search [ 236.609849] ath: country maps to regdmn code: 0x50 [ 236.609850] ath: Country alpha2 being used: TW [ 236.609851] ath: Regpair used: 0x50 [ 236.609852] ath: regdomain 0x809e dynamically updated by country IE [ 236.609871] cfg80211: Regulatory domain changed to country: TW [ 236.609872] cfg80211: DFS Master region: unset [ 236.609873] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 236.609875] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 236.609876] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 236.609877] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 243.872667] Starting fwts hibernate [ 243.872682] Hibernate [ 244.074329] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 3=DEAUTH_LEAVING) [ 244.081036] cfg80211: Calling CRDA to update world regulatory domain [ 244.083258] cfg80211: World regulatory domain updated: [ 244.083261] cfg80211: DFS Master region: unset [ 244.083263] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 244.083265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 244.083266] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 244.083267] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 244.083268] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 244.083269] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 244.138276] vgaarb: this pci device is not a vga device [ 244.329408] init: anacron main process (10386) killed by TERM signal [ 244.930928] vgaarb: this pci device is not a vga device [ 245.089739] PM: Syncing filesystems ... done. [ 245.171717] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 245.173304] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 245.173307] PM: Marking nosave pages: [mem 0xc3017000-0xc301dfff] [ 245.173309] PM: Marking nosave pages: [mem 0xc3442000-0xc3816fff] [ 245.173323] PM: Marking nosave pages: [mem 0xc7ee5000-0xc7ffffff] [ 245.173328] PM: Marking nosave pages: [mem 0xc8761000-0xc87fffff] [ 245.173331] PM: Marking nosave pages: [mem 0xc8fab000-0xc8ffffff] [ 245.173333] PM: Marking nosave pages: [mem 0xca6fb000-0xca7fffff] [ 245.173337] PM: Marking nosave pages: [mem 0xcb82a000-0xffffffff] [ 245.173891] PM: Basic memory bitmaps created [ 245.173941] PM: Preallocating image memory... [ 245.202668] hpet1: lost 1 rtc interrupts [ 245.335683] hpet1: lost 6 rtc interrupts [ 245.472577] done (allocated 380759 pages) [ 245.472580] PM: Allocated 1523036 kbytes in 0.29 seconds (5251.84 MB/s) [ 245.472582] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 245.473901] Suspending console(s) (use no_console_suspend to debug) [ 245.480546] <6>[fglrx] IRQ 52 Disabled [ 245.480601] <6>[fglrx] Preparing suspend fglrx in kernel. [ 248.354499] <6>[fglrx] Suspending fglrx in kernel completed. [ 248.354500] <6>[fglrx] Power down the ASIC . [ 248.354565] PM: freeze of devices complete after 2880.336 msecs [ 248.354880] PM: late freeze of devices complete after 0.313 msecs [ 248.355647] PM: noirq freeze of devices complete after 0.766 msecs [ 248.355875] ACPI: Preparing to enter system sleep state S4 [ 248.356078] PM: Saving platform NVS memory [ 248.356839] Disabling non-boot CPUs ... [ 248.356870] intel_pstate CPU 1 exiting [ 248.356985] Broke affinity for irq 47 [ 248.357989] kvm: disabling virtualization on CPU1 [ 248.357993] smpboot: CPU 1 is now offline [ 248.358354] PM: Creating hibernation image: [ 248.585758] PM: Need to copy 381806 pages [ 248.585760] PM: Normal pages needed: 381806 + 1024, available pages: 3791443 [ 248.359041] PM: Restoring platform NVS memory [ 248.359466] Enabling non-boot CPUs ... [ 248.359499] x86: Booting SMP configuration: [ 248.359500] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 248.371348] kvm: enabling virtualization on CPU1 [ 248.373551] Intel pstate controlling: cpu 1 [ 248.373586] CPU1 is up [ 248.375184] ACPI: Waking up from system sleep state S4 [ 248.379878] PM: noirq restore of devices complete after 4.143 msecs [ 248.380098] PM: early restore of devices complete after 0.198 msecs [ 248.465622] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 248.465663] usb usb3: root hub lost power or was reset [ 248.465664] usb usb4: root hub lost power or was reset [ 248.465788] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 248.465835] mei_me 0000:00:16.0: irq 50 for MSI/MSI-X [ 248.465855] usb usb1: root hub lost power or was reset [ 248.466956] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X [ 248.467109] usb usb2: root hub lost power or was reset [ 248.469751] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 248.471010] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 248.471031] ath: phy0: ASPM enabled: 0x43 [ 248.475350] <6>[fglrx] Power up the ASIC [ 248.504078] sd 0:0:0:0: [sda] Starting disk [ 248.795924] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 248.823912] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 248.823932] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 248.831920] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 248.831944] usb 3-9: reset full-speed USB device number 4 using xhci_hcd [ 248.842337] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 248.842339] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 248.842340] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 248.843832] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 248.843833] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 248.843834] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 248.844159] ata6.00: configured for UDMA/100 [ 248.845663] <6>[fglrx] Preparing resume fglrx in kernel. [ 248.877906] ata1.00: configured for UDMA/100 [ 248.960169] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac50c0 [ 248.960170] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800caac5108 [ 249.071972] usb 3-10: reset full-speed USB device number 11 using xhci_hcd [ 249.199820] <6>[fglrx] Resuming fglrx in kernel completed. [ 249.199876] <6>[fglrx] IRQ 52 Enabled [ 249.200648] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c500 [ 249.200649] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c590 [ 249.200650] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8803f603c548 [ 249.200651] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d39108 [ 249.200652] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800c2d390c0 [ 249.460160] usb 3-2: reset low-speed USB device number 2 using xhci_hcd [ 249.746112] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db46c0 [ 249.746113] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415db4720 [ 249.746116] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 249.746131] usb 3-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 249.864129] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 249.904153] usb 3-4: reset high-speed USB device number 3 using xhci_hcd [ 250.131827] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880415d2e780 [ 250.201901] PM: restore of devices complete after 1736.453 msecs [ 250.202096] PM: Image restored successfully. [ 250.202139] PM: Basic memory bitmaps freed [ 250.202141] Restarting tasks ... done. [ 250.463600] FWTS_RESUME [ 250.463615] Finished fwts resume [ 250.480637] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 250.522201] r8169 0000:04:00.0 eth0: link down [ 250.522243] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 252.224839] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 252.236758] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 252.238268] wlan0: authenticated [ 252.240315] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 252.242895] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 252.242940] wlan0: associated [ 252.242947] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 252.243873] cfg80211: Calling CRDA for country: TW [ 252.245480] ath: EEPROM regdomain: 0x809e [ 252.245483] ath: EEPROM indicates we should expect a country code [ 252.245484] ath: doing EEPROM country->regdmn map search [ 252.245485] ath: country maps to regdmn code: 0x50 [ 252.245486] ath: Country alpha2 being used: TW [ 252.245487] ath: Regpair used: 0x50 [ 252.245488] ath: regdomain 0x809e dynamically updated by country IE [ 252.245507] cfg80211: Regulatory domain changed to country: TW [ 252.245508] cfg80211: DFS Master region: unset [ 252.245509] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 252.245511] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 252.245512] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 252.245513] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A) [ 252.253583] wlan0: deauthenticating from 18:9c:5d:31:3f:e0 by local choice (Reason: 2=PREV_AUTH_NOT_VALID) [ 252.260139] cfg80211: Calling CRDA to update world regulatory domain [ 252.260215] wlan0: authenticate with 18:9c:5d:31:3f:e0 [ 252.266476] wlan0: send auth to 18:9c:5d:31:3f:e0 (try 1/3) [ 252.266584] cfg80211: World regulatory domain updated: [ 252.266586] cfg80211: DFS Master region: unset [ 252.266587] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 252.266589] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 252.266591] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 252.266592] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm), (N/A) [ 252.266593] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 252.266594] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm), (N/A) [ 252.267969] wlan0: authenticated [ 252.268286] wlan0: associate with 18:9c:5d:31:3f:e0 (try 1/3) [ 252.271128] wlan0: RX AssocResp from 18:9c:5d:31:3f:e0 (capab=0x431 status=0 aid=13) [ 252.271172] wlan0: associated [ 252.271298] cfg80211: Calling CRDA for country: TW [ 252.272844] ath: EEPROM regdomain: 0x809e [ 252.272846] ath: EEPROM indicates we should expect a country code [ 252.272847] ath: doing EEPROM country->regdmn map search [ 252.272848] ath: country maps to regdmn code: 0x50 [ 252.272849] ath: Country alpha2 being used: TW [ 252.272850] ath: Regpair used: 0x50 [ 252.272851] ath: regdomain 0x809e dynamically updated by country IE [ 252.272869] cfg80211: Regulatory domain changed to country: TW [ 252.272870] cfg80211: DFS Master region: unset [ 252.272871] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 252.272872] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm), (N/A) [ 252.272874] cfg80211: (5270000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 1700 mBm), (0 s) [ 252.272875] cfg80211: (5735000 KHz - 5815000 KHz @ 40000 KHz), (300 mBi, 3000 mBm), (N/A)